[PATCH v1] verdin-imx8mm: Remove stale fdt_addr env variable

[Francesco Dolcini]

From: Francesco Dolcini <francesco.dolcini at toradex.com>

fdt_addr variable is the location in flash of the device tree blob [1], it
does not exist for verdin-imx8mm.

Because of this the bootefi command fails unless the optional
`[fdt address]` parameter is passed on the command line,
bootefi.c:efi_install_fdt() assumes that `fdt_addr` is valid when
present.

Fix this removing fdt_addr from the U-Boot environment.

[1] doc/usage/environment.rst

Signed-off-by: Francesco Dolcini <francesco.dolcini at toradex.com>
---
 include/configs/verdin-imx8mm.h | 1 -
 1 file changed, 1 deletion(-)

diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h
index 8072d5d503f2..a7ea02807ddf 100644
--- a/include/configs/verdin-imx8mm.h
+++ b/include/configs/verdin-imx8mm.h
@@ -40,7 +40,6 @@
 	"boot_file=Image\0" \
 	"boot_script_dhcp=boot.scr\0" \
 	"console=ttymxc0\0" \
-	"fdt_addr=0x43000000\0" \
 	"fdt_board=dev\0" \
 	"initrd_addr=0x43800000\0" \
 	"initrd_high=0xffffffffffffffff\0" \
-- 
2.39.2