January 2024 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Mon Jan 1 01:33:12 CET 2024
Ending: Wed Jan 31 23:41:18 CET 2024
Messages: 2741

• [PATCH] xen: xenguest_arm64: map all VIRTIO MMIO region   Peng Fan (OSS)
• [PATCH] mtd: spi-nor: scale up timeout for full-chip erase   Venkatesh Yadav Abbarapu
• [PATCH] xilinx: r5: Include the sys_r5_proto.h header for future use   Venkatesh Yadav Abbarapu
• [PATCH v2] xilinx: r5: Include the sys_r5_proto.h header for future use   Venkatesh Yadav Abbarapu
• [PATCH] usb: dwc3: Integrate usb5744 & usb2244 driver support   Venkatesh Yadav Abbarapu
• [PATCH] misc: usb5744: Add support for usb5744 usb hub driver   Venkatesh Yadav Abbarapu
• [PATCH] misc: usb2244: Add support to reset usb2244 usb2.0 SD controller   Venkatesh Yadav Abbarapu
• [PATCH 0/2] xilinx: Update the kaslr-seed property   Venkatesh Yadav Abbarapu
• [PATCH 1/2] xilinx: board: Update the kaslr-seed property   Venkatesh Yadav Abbarapu
• [PATCH 2/2] configs: zynqmp_kria: Enable CONFIG_OF_BOARD_SETUP   Venkatesh Yadav Abbarapu
• [PATCH v2 0/2] xilinx: Update the kaslr-seed property   Venkatesh Yadav Abbarapu
• [PATCH v2 1/2] xilinx: board: Update the kaslr-seed property   Venkatesh Yadav Abbarapu
• [PATCH v2 2/2] configs: zynqmp_kria: Enable CONFIG_OF_BOARD_SETUP   Venkatesh Yadav Abbarapu
• [PATCH v3 0/2] xilinx: Update the kaslr-seed property   Venkatesh Yadav Abbarapu
• [PATCH v3 1/2] xilinx: board: Update the kaslr-seed property   Venkatesh Yadav Abbarapu
• [PATCH v3 2/2] configs: zynqmp_kria: Enable CONFIG_OF_BOARD_SETUP   Venkatesh Yadav Abbarapu
• [PATCH] mtd: nand: Print warning for unsupported ecc modes   Venkatesh Yadav Abbarapu
• [PATCH v2] mtd: nand: arasan: Print warning for unsupported ecc modes   Venkatesh Yadav Abbarapu
• [PATCH] soc: zynqmp: Add the IDcode for dr_SE and eg_SE variants   Venkatesh Yadav Abbarapu
• [PATCH] configs: versal: Enable CONFIG_LTO for mini qspi/ospi   Venkatesh Yadav Abbarapu
• [PATCH] configs: versal_net: Enable CONFIG_LTO for mini qspi/ospi   Venkatesh Yadav Abbarapu
• [PATCH v10 0/8] spi-nor: Add parallel and stacked memories support   Venkatesh Yadav Abbarapu
• [PATCH v10 1/8] mtd: spi-nor: Add parallel and stacked memories support   Venkatesh Yadav Abbarapu
• [PATCH v10 2/8] mtd: spi-nor: Add parallel memories support for read_sr and read_fsr   Venkatesh Yadav Abbarapu
• [PATCH v10 3/8] mtd: spi-nor: Add parallel and stacked memories support in read_bar and write_bar   Venkatesh Yadav Abbarapu
• [PATCH v10 4/8] spi: spi-uclass: Read chipselect and restrict capabilities   Venkatesh Yadav Abbarapu
• [PATCH v10 5/8] spi: zynqmp_gqspi: Add parallel memories support in GQSPI driver   Venkatesh Yadav Abbarapu
• [PATCH v10 6/8] spi: zynq_qspi: Add parallel memories support in QSPI driver   Venkatesh Yadav Abbarapu
• [PATCH v10 7/8] spi: Add the spi advance options for non SPL   Venkatesh Yadav Abbarapu
• [PATCH v10 8/8] config: xea: Enable the SPI_ADVANCE config option   Venkatesh Yadav Abbarapu
• [PATCH v2 5/7] net: dwc_eth_qos_rockchip: Add support for RK3588   Stefan Agner
• [PATCH v6 0/6] Implement fastboot multiresponce   Ion Agorria
• [PATCH v5 0/7] rpi5: initial support   Darko Alavanja
• [PATCH 1/2] arm: dts: Transpeed 8K618-T: Add Transpeed 8K618-T board support   Nick Alilovic
• [PATCH 2/2] configs: Transpeed 8K618-T: Add Transpeed 8K618-T board support   Nick Alilovic
• [PATCH v2] configs: Transpeed 8K618-T: Add Transpeed 8K618-T board support   Nick Alilovic
• vexpress and DM_SERIAL   Kristian Amlie
• [PATCH v1] vexpress_ca9x4: Enable DM_SERIAL   Kristian Amlie
• Fwd: New Defects reported by Coverity Scan for Das U-Boot   Sean Anderson
• [PATCH v1] fastboot: introduce 'oem board' subcommand   Sean Anderson
• [PATCH v3] clk: meson: add Hardware Clock measure driver   Sean Anderson
• [PATCH v2 1/1] clk: clk-gpio: add actual gated clock   Sean Anderson
• [PATCH v2 1/1] clk: clk-gpio: add actual gated clock   Sean Anderson
• [PATCH v1] fastboot: introduce 'oem board' subcommand   Sean Anderson
• [PATCH v2 1/2] part: Add a function to find ESP partition   Sean Anderson
• [PATCH] mtd: nand: Print warning for unsupported ecc modes   Sean Anderson
• [PATCH] net: phy: realtek: Add support for LED configuration   Sean Anderson
• [PATCH v3 1/1] clk: clk-gpio: add actual gated clock   Sean Anderson
• [PATCH v3 0/1] Fix clk-gpio driver   Sean Anderson
• [PATCH v2] clk: fix clk_get_rate() always return ulong   Sean Anderson
• [PATCH v3] clk: meson: add Hardware Clock measure driver   Sean Anderson
• [PATCH 0/3] clk: Remove clk_free and better document clk_ops   Sean Anderson
• [GIT PULL] Clock changes for v2024.04   Sean Anderson
• [RFC PATCH 00/16] Introduce ICSSG Ethernet driver   MD Danish Anwar
• [RFC PATCH 00/16] Introduce ICSSG Ethernet driver   MD Danish Anwar
• [RFC PATCH 00/16] Introduce ICSSG Ethernet driver   MD Danish Anwar
• [RFC PATCH 12/16] arm: dts: k3-am65x-binman: Add ICSSG2 overlay and configuration   MD Danish Anwar
• [RFC PATCH 12/16] arm: dts: k3-am65x-binman: Add ICSSG2 overlay and configuration   MD Danish Anwar
• [RFC PATCH 15/16] tools/fdtgrep: Include __symbols__ table   MD Danish Anwar
• [RFC PATCH v2 00/15] Introduce ICSSG Ethernet driver   MD Danish Anwar
• [RFC PATCH v2 01/15] dma: ti: k3-udma: Use ring_idx to pair k3 nav rings   MD Danish Anwar
• [RFC PATCH v2 02/15] misc: fs-loader: Use fw_storage_interface instead of storage_interface   MD Danish Anwar
• [RFC PATCH v2 03/15] remoteproc: uclass: Add methods to load firmware to rproc and boot rproc   MD Danish Anwar
• [RFC PATCH v2 04/15] net: ti: icssg: Add Firmware Interface for ICSSG Ethernet driver.   MD Danish Anwar
• [RFC PATCH v2 05/15] net: ti: icssg: Add Firmware config and classification APIs.   MD Danish Anwar
• [RFC PATCH v2 06/15] net: ti: icssg: Add icssg queues APIs and macros   MD Danish Anwar
• [RFC PATCH v2 07/15] net: ti: icssg: Add ICSSG ethernet driver   MD Danish Anwar
• [RFC PATCH v2 08/15] net: ti: icssg: Add support sending FDB command to update rx_flow_id   MD Danish Anwar
• [RFC PATCH v2 09/15] net: ti: icssg: Enforce pinctrl state on the MDIO child node   MD Danish Anwar
• [RFC PATCH v2 10/15] arm: dts: k3-am654-base-board: Add ICSSG2 Ethernet support   MD Danish Anwar
• [RFC PATCH v2 11/15] arm: dts: k3-am65x-binman: Add ICSSG2 overlay and configuration   MD Danish Anwar
• [RFC PATCH v2 12/15] configs: am65x_evm_a53: Enable ICSSG Driver   MD Danish Anwar
• [RFC PATCH v2 13/15] configs: am65x_evm_a53: add SPL_LOAD_FIT_APPLY_OVERLAY   MD Danish Anwar
• [RFC PATCH v2 14/15] board: ti: am65x: Add check for k3-am654-icssg2 in board_fit_config_match()   MD Danish Anwar
• [RFC PATCH v2 15/15] board: ti: am65x: Set fw_storage_interface and fw_dev_part ENVs   MD Danish Anwar
• [RFC PATCH v3 00/15] Introduce ICSSG Ethernet driver   MD Danish Anwar
• [RFC PATCH v3 01/15] dma: ti: k3-udma: Use ring_idx to pair k3 nav rings   MD Danish Anwar
• [RFC PATCH v3 02/15] misc: fs-loader: Use fw_storage_interface instead of storage_interface   MD Danish Anwar
• [RFC PATCH v3 03/15] remoteproc: uclass: Add methods to load firmware to rproc and boot rproc   MD Danish Anwar
• [RFC PATCH v3 04/15] net: ti: icssg: Add Firmware Interface for ICSSG Ethernet driver.   MD Danish Anwar
• [RFC PATCH v3 05/15] net: ti: icssg: Add Firmware config and classification APIs.   MD Danish Anwar
• [RFC PATCH v3 06/15] net: ti: icssg: Add icssg queues APIs and macros   MD Danish Anwar
• [RFC PATCH v3 07/15] net: ti: icssg: Add ICSSG ethernet driver   MD Danish Anwar
• [RFC PATCH v3 08/15] net: ti: icssg: Add support sending FDB command to update rx_flow_id   MD Danish Anwar
• [RFC PATCH v3 09/15] net: ti: icssg: Enforce pinctrl state on the MDIO child node   MD Danish Anwar
• [RFC PATCH v3 10/15] arm: dts: k3-am654-base-board: Add ICSSG2 Ethernet support   MD Danish Anwar
• [RFC PATCH v3 11/15] arm: dts: k3-am65x-binman: Add ICSSG2 overlay and configuration   MD Danish Anwar
• [RFC PATCH v3 12/15] configs: am65x_evm_a53: Enable ICSSG Driver   MD Danish Anwar
• [RFC PATCH v3 13/15] configs: am65x_evm_a53: add SPL_LOAD_FIT_APPLY_OVERLAY   MD Danish Anwar
• [RFC PATCH v3 14/15] board: ti: am65x: Add check for k3-am654-icssg2 in board_fit_config_match()   MD Danish Anwar
• [RFC PATCH v3 15/15] board: ti: am65x: Set fw_storage_interface and fw_dev_part ENVs   MD Danish Anwar
• [RFC PATCH v3 14/15] board: ti: am65x: Add check for k3-am654-icssg2 in board_fit_config_match()   MD Danish Anwar
• [PATCH v4] dma: ti: k3-udma: Use ring_idx to pair k3 nav rings   MD Danish Anwar
• [PATCH v4] misc: fs-loader: Use fw_storage_interface instead of storage_interface   MD Danish Anwar
• [PATCH v4] remoteproc: uclass: Add methods to load firmware to rproc and boot rproc   MD Danish Anwar
• [RFC PATCH 00/16] Introduce ICSSG Ethernet driver   Anwar, Md Danish
• [RFC PATCH v3 02/15] misc: fs-loader: Use fw_storage_interface instead of storage_interface   Anwar, Md Danish
• [PATCH v7] fdt: Allow the devicetree to come from a bloblist   Ilias Apalodimas
• [PATCH v2] efi_loader: Clean up efi_dp_append and efi_dp_concat   Ilias Apalodimas
• [PATCH v3 2/2] efi_loader: provide tool to dump SMBIOS table   Ilias Apalodimas
• Adding EFI runtime support to the Arm's FF-A bus   Ilias Apalodimas
• [PATCH v2 2/2] lib: smbios: verify_checksum() is duplicate   Ilias Apalodimas
• [PATCH v2 1/2] lib: make table_compute_checksum() arguments const   Ilias Apalodimas
• [PATCH v2 2/2] efi_loader: support fmp versioning for multi bank update   Ilias Apalodimas
• [PATCH v2 2/2] efi_loader: support fmp versioning for multi bank update   Ilias Apalodimas
• [PATCH v4 2/9] bloblist: check bloblist with specified buffer size   Ilias Apalodimas
• [PATCH v4 8/9] fdt: update the document and Kconfig description   Ilias Apalodimas
• [PATCH 1/1] smbios: buffer overflow when zeroing entry point   Ilias Apalodimas
• [PATCH] cmd: efidebug: check pointer after memory allocation   Ilias Apalodimas
• [PATCH] arm64: zynqmp: Start TPM automatically via preboot on Kria   Ilias Apalodimas
• [PATCH 1/2] smbios: shorten sysinfo_str declarations and use   Ilias Apalodimas
• [PATCH 2/2] smbios: fix matching issues for table types   Ilias Apalodimas
• [PATCH v3 2/2] efi_loader: support fmp versioning for multi bank update   Ilias Apalodimas
• [PATCH v6 3/7] bloblist: refactor of bloblist_reloc()   Ilias Apalodimas
• [PATCH v6 0/7] Handoff bloblist from previous boot stage   Ilias Apalodimas
• [PATCH v2 1/3] efi_loader: avoid pointer access after calling efi_delete_handle   Ilias Apalodimas
• [PATCH v2 2/3] efi_loader: create common function to free struct efi_disk_obj   Ilias Apalodimas
• [PATCH v2 1/3] efi_loader: avoid pointer access after calling efi_delete_handle   Ilias Apalodimas
• [PATCH v2 4/4] test: unit test for smbios command   Ilias Apalodimas
• [PATCH v2 4/4] test: unit test for smbios command   Ilias Apalodimas
• [PATCH v2 2/4] cmd: provide command to display SMBIOS information   Ilias Apalodimas
• [PATCH v2 2/4] cmd: provide command to display SMBIOS information   Ilias Apalodimas
• ** CID 478334: Memory - corruptions (OVERRUN)   Ilias Apalodimas
• ** CID 478334: Memory - corruptions (OVERRUN)   Ilias Apalodimas
• [PATCH] efi_loader : Suppress error print message   Ilias Apalodimas
• [PATCH 2/4] doc: Document capsule generation through a config file   Ilias Apalodimas
• [PATCH 00/18] FWU: Migrate FWU metadata to version 2   Ilias Apalodimas
• [PATCH 02/18] fwu: metadata: Migrate to version 2 of the structure   Ilias Apalodimas
• [PATCH 01/18] configs: fwu: Remove FWU configs for metadata V2 migration   Ilias Apalodimas
• [PATCH 1/1] efi_selftest: add missing line feed in efi_selftest_miniapp_exit   Ilias Apalodimas
• [PATCH v3 6/6] configs: enable smbios command on qemu_arm64_defconfig   Ilias Apalodimas
• [PATCH v3 5/6] configs: enable smbios command on sandbox   Ilias Apalodimas
• [PATCH v3 5/6] configs: enable smbios command on sandbox   Ilias Apalodimas
• [PATCH v2] efi_loader: migrate SMBIOS 3.0 entry point structure for measurement   Ilias Apalodimas
• [PATCH 2/2] cmd: in do_efi_capsule_esrt use efi_get_configuration_table   Ilias Apalodimas
• [PATCH 1/2] efi_loader: export efi_get_configuration_table   Ilias Apalodimas
• [PATCH 1/1] efi_loader: replace find_smbios_table by library function   Ilias Apalodimas
• [PATCH v7 4/8] arm: armv7: save boot arguments   Ilias Apalodimas
• [PATCH 1/1] smbios: get_str_from_dt() - add sysinfo_id description   Ilias Apalodimas
• [PATCH v2 2/3] driver: rng: Fix SMCCC TRNG crash   Ilias Apalodimas
• [PATCH v3] clk: meson: add Hardware Clock measure driver   Neil Armstrong
• [PATCH] sandbox_flattree: enable button support   Neil Armstrong
• [PATCH v3 02/17] video: dw_hdmi: Add Vendor PHY handling   Neil Armstrong
• [PATCH v3 04/17] video: dw_hdmi: Add read_hpd hook   Neil Armstrong
• [PATCH v3 05/17] video: dw_hdmi: Add setup_hpd hook   Neil Armstrong
• [PATCH v3 03/17] video: dw_hdmi: Extend the HPD detection   Neil Armstrong
• [PATCH] ARM: meson: stop printing board model after sysinfo update   Neil Armstrong
• [PATCH] ARM: meson: stop printing board model after sysinfo update   Neil Armstrong
• [PATCH 11/11] ARM: renesas: Add Renesas R8A779H0 V4M Gray Hawk board code   Paul Barker
• [PATCH 10/11] ARM: dts: renesas: Add Renesas Gray Hawk boards support   Paul Barker
• [PATCH 08/11] ARM: dts: renesas: Add Renesas R8A779H0 V4M SoC support   Paul Barker
• [PATCH 09/11] ARM: dts: renesas: Add Renesas R8A779H0 V4M DT extras   Paul Barker
• [PATCH 07/11] ARM: renesas: Add R8A779H0 V4M Kconfig entry and PRR ID   Paul Barker
• [PATCH 06/11] mtd: spi: renesas: Add R8A779H0 V4M support   Paul Barker
• [PATCH 03/11] clk: renesas: Add R8A779H0 V4M clock tables   Paul Barker
• [PATCH 02/11] dt-bindings: clock: Add R8A779H0 V4M CPG Core Clock Definitions   Paul Barker
• [PATCH 01/11] dt-bindings: power: Add R8A779H0 V4M SYSC power domain definitions   Paul Barker
• [PATCH] ARM: renesas: whitehawk: Drop extra leading space   Paul Barker
• [PATCH 3/3] net: ravb: Use PHY MDIO address from DT if available   Paul Barker
• [PATCH 1/3] clk: renesas: Drop include common.h   Paul Barker
• [PATCH 2/3] pinctrl: renesas: Drop include common.h   Paul Barker
• [PATCH 3/3] ARM: renesas: Drop include common.h   Paul Barker
• [PATCH v2] net: phy: Use PHY MDIO address from DT if available   Paul Barker
• [PATCH 1/1] add turris-rwtm-rng from CZ.NIC rWTM Firmware   Marek Behún
• Passing boot logs to Linux?   Csókás Bence
• [PATCH] rsa: use pkcs11 uri as defined in rfc7512   Csókás Bence
• [PATCH 1/2] lib: rsa: Fix PKCS11 URI if one is not given in `keydir`   Csókás Bence
• [PATCH 2/2] lib: rsa: Allow legacy URI specification without "pkcs11:"   Csókás Bence
• [PATCH v1 1/2] imx: imxrt1050-evk: Add support for SPI flash booting   Giulio Benetti
• [PATCH v1 1/2] imx: imxrt1050-evk: Add support for SPI flash booting   Giulio Benetti
• [PATCH] xilinx: Enable the NFS command by default   Tejas Bhumkar
• [PATCH v2] xilinx: Enable the NFS command by default   Tejas Bhumkar
• [PATCH RFC] spi: cadence_qspi: Address the comparison failure for 0-8   Tejas Bhumkar
• [PATCH] efi_loader : Suppress error print message   Tejas Bhumkar
• [PATCH] spi: cadence_qspi: Address the comparison failure for 0-8 bytes of data   Tejas Bhumkar
• [PATCH v2] spi: cadence_qspi: Address the comparison failure for 0-8 bytes of data   Tejas Bhumkar
• [PATCH] efi_loader : Suppress error print message   Bhumkar, Tejas Arvind
• [PATCH RFC] spi: cadence_qspi: Address the comparison failure for 0-8   Bhumkar, Tejas Arvind
• [PATCH] efi_loader : Suppress error print message   Bhumkar, Tejas Arvind
• [PATCH v7 2/2] schemas: Add some common reserved-memory usages   Ard Biesheuvel
• [PATCH v7 2/2] schemas: Add some common reserved-memory usages   Ard Biesheuvel
• [PATCH v7 2/2] schemas: Add some common reserved-memory usages   Ard Biesheuvel
• [PATCH v2 1/4] memory: ti-gpmc: Fix build   Dario Binacchi
• [PATCH v2 2/4] mtd: rawnand: omap_gpmc: Use DT provided IO address   Dario Binacchi
• [PATCH v2 0/4] mtd: omap_gpmc: Fix GPMC & NAND drivers   Dario Binacchi
• [PATCH v2 0/2] mtd: nand: omap_gpmc: Fix NAND for AM335x   Dario Binacchi
• [PATCH v2 00/14] Support SPI NAND in fastboot protocol   Dario Binacchi
• [PULL] Pull request for u-boot-nand-20240115   Dario Binacchi
• Adding support for Orange Pi Zero 2W   Federico Borgo
• Please pull u-boot-samsung master   Stefan Bosch
• [PATCH v3 0/2] arm: s5p4418: fix relocation   Stefan Bosch
• [PATCH v3 1/2] common: board_f: change calculation of gd->mon_len to fix s5p4418 reloc   Stefan Bosch
• [PATCH v3 2/2] arm: s5p4418: fix relocation of vectors   Stefan Bosch
• [PATCH v7 06/17] arm: mach-k3: j784s4: Add clk and power support   Bryan Brattlof
• [PATCH v3 3/8] scripts/Makefile.lib: Statically define *-u-boot.dtsi files location   Bryan Brattlof
• [PATCH 0/2] arm: dts: Add Itap Delay Value For High Speed DDR   Bryan Brattlof
• [PATCH v3 3/8] scripts/Makefile.lib: Statically define *-u-boot.dtsi files location   Bryan Brattlof
• [PATCH v3 3/8] scripts/Makefile.lib: Statically define *-u-boot.dtsi files location   Bryan Brattlof
• [PATCH 0/2] arm: dts: Add Itap Delay Value For High Speed DDR   Bryan Brattlof
• [PATCH v4 4/6] bcm2835: Dynamically calculate bytes per pixel parameter   Matthias Brugger
• [PATCH v4 0/6] rpi5: initial support   Matthias Brugger
• [GIT PULL] rpi: updates for v2024.04   Matthias Brugger
• [PATCH v3 2/3] driver: rng: Fix SMCCC TRNG crash   Matthias Brugger
• [PATCH v3 3/3] cmd: rng: Add rng list command   Matthias Brugger
• [PATCH 4/7] smbios: string table always needs two terminating NUL bytes   Matthias Brugger
• [PATCH 10/12] stm32mp: activate the command stboard for stm32mp25 boards   Patrice CHOTARD
• [PATCH 01/12] arm64: dts: st: add bsec support to stm32mp25   Patrice CHOTARD
• [PATCH 02/12] arm: stm32mp: add Rev.B support for STM32MP25   Patrice CHOTARD
• [PATCH 03/12] stm32mp: bsec: add driver data   Patrice CHOTARD
• [PATCH 04/12] stm32mp: bsec: add support of stm32mp25   Patrice CHOTARD
• [PATCH 05/12] configs: stm32mp25: add support of fuse command   Patrice CHOTARD
• [PATCH 06/12] stm32mp: add soc.c file   Patrice CHOTARD
• [PATCH 07/12] stm32mp: add setup_serial_number for stm32mp25   Patrice CHOTARD
• [PATCH 08/12] smt32mp: add setup_mac_address for stm32mp25   Patrice CHOTARD
• [PATCH 09/12] stm32mp: stm32prog: add support of stm32mp25   Patrice CHOTARD
• [PATCH 11/12] board: st: stm32mp2: add checkboard   Patrice CHOTARD
• [PATCH 12/12] board: st: stm32mp2: display the board identification   Patrice CHOTARD
• [PATCH] smt32mp: Add dependencies on CMDLINE for command stm32key   Patrice CHOTARD
• [PATCH v13 00/24] Modernize U-Boot shell   Patrice CHOTARD
• [PATCH v2 14/14] arm: Rename STM32MP15x   Patrice CHOTARD
• [PATCH v2 09/14] stm32mp: stm32prog: add support of stm32mp25   Patrice CHOTARD
• [PATCH v2 10/14] stm32mp: activate the command stboard for stm32mp25 boards   Patrice CHOTARD
• [PATCH v13 00/24] Modernize U-Boot shell   Patrice CHOTARD
• [PATCH] ARM: stm32: Set stdio to serial on DH STM32MP15xx DHSOM   Patrice CHOTARD
• [PATCH v13 00/24] Modernize U-Boot shell   Patrice CHOTARD
• [PATCH] common: console: Fix print complete stdio device list   Patrice CHOTARD
• [PATCH v13 00/24] Modernize U-Boot shell   Patrice CHOTARD
• [PATCH] ARM: dts: stm32: Fix reset for usart1 in scmi configuration   Patrice CHOTARD
• [PATCH v2 01/14] arm64: dts: st: add bsec support to stm32mp25   Patrice CHOTARD
• [PATCH v2 02/14] arm: stm32mp: add Rev.B support for STM32MP25   Patrice CHOTARD
• [PATCH v2 03/14] stm32mp: bsec: add driver data   Patrice CHOTARD
• [PATCH v2 04/14] stm32mp: bsec: add support of stm32mp25   Patrice CHOTARD
• [PATCH v2 05/14] configs: stm32mp25: add support of fuse command   Patrice CHOTARD
• [PATCH v2 06/14] stm32mp: add soc.c file   Patrice CHOTARD
• [PATCH v2 07/14] stm32mp: add setup_serial_number for stm32mp25   Patrice CHOTARD
• [PATCH v2 08/14] smt32mp: add setup_mac_address for stm32mp25   Patrice CHOTARD
• [PATCH v2 11/14] board: st: stm32mp2: add checkboard   Patrice CHOTARD
• [PATCH v2 12/14] board: st: stm32mp2: display the board identification   Patrice CHOTARD
• [PATCH v2 13/14] arm: Rename STM32MP13x   Patrice CHOTARD
• [PATCH v2 14/14] arm: Rename STM32MP15x   Patrice CHOTARD
• [PATCH] ARM: stm32: Set stdio to serial on DH STM32MP15xx DHSOM   Patrice CHOTARD
• [PATCH] stm32mp2: Fix CONFIG_STM32MP25X flag usage   Patrice CHOTARD
• [PULL] Pull request for u-boot master / v2024.04 = u-boot-stm32-20240119   Patrice CHOTARD
• [PATCH 1/1] mmc: Don't suggest to build modules in Kconfig.   Patrice CHOTARD
• [PATCH] power: regulator: Fix error code in regulator_list_autoset()   Patrice CHOTARD
• [PATCH 1/2] riscv: dts: starfive: add regulator device   Nam Cao
• [PATCH 2/2] riscv: dts: jh7110: add power management unit controller node   Nam Cao
• [PATCH 1/2] riscv: dts: starfive: add regulator device   Nam Cao
• riscv defconfig starfive visionfive2 env is nowhere, missing axp15060 regulator, misc vendor hacks for Milk-V Mars CM Lite   Nam Cao
• [PATCH v2 0/2] Add device tree nodes needed by OpenSBI on Visionfive 2   Nam Cao
• [PATCH v2 1/2] riscv: dts: jh7110: add power management unit controller node   Nam Cao
• [PATCH v2 2/2] riscv: dts: starfive: add regulator device   Nam Cao
• [bug report] cmd: mbr: Allow 4 MBR partitions without need for extended   Nam Cao
• [RFC PATCH v3 14/15] board: ti: am65x: Add check for k3-am654-icssg2 in board_fit_config_match()   Dan Carpenter
• [RFC PATCH v3 14/15] board: ti: am65x: Add check for k3-am654-icssg2 in board_fit_config_match()   Dan Carpenter
• [PATCH v1 0/1] Fix booting kernels with ATAGS and extlinux   Dan Carpenter
• [bug report] cmd: mbr: Allow 4 MBR partitions without need for extended   Dan Carpenter
• [PATCH v10 1/8] mtd: spi-nor: Add parallel and stacked memories support   Dan Carpenter
• [PATCH v3 03/36] mmc: msm_sdhci: use modern clock handling   Dan Carpenter
• [PATCH v3 14/36] board: dragonboard410c: upstream DT compat   Dan Carpenter
• [PATCH] fsl-layerscape/soc.c: do not destroy bootcmd environment   Dan Carpenter
• [PATCH] button: qcom-pmic: fix some error checking   Dan Carpenter
• [PATCH] power: regulator: Fix error code in regulator_list_autoset()   Dan Carpenter
• [PATCH] blk: host_dev: Fix error code in host_sb_attach_file()   Dan Carpenter
• [bug report] lib: sparse: Make CHUNK_TYPE_RAW buffer aligned   Dan Carpenter
• [PATCH v2 2/3] driver: rng: Fix SMCCC TRNG crash   Dan Carpenter
• [PATCH v2 2/3] driver: rng: Fix SMCCC TRNG crash   Dan Carpenter
• [PATCH 07/13] gpio: msm_gpio: add .set_flags op   Dan Carpenter
• [PATCH 06/13] clk/qcom: sdm845: add USB clocks   Dan Carpenter
• [PATCH 1/2] board: ti: am62x: am62x.env: Fix boot_targets   Manorit Chawdhry
• [PATCH 1/2] board: ti: am62x: am62x.env: Fix boot_targets   Manorit Chawdhry
• [PATCH 0/2] Boot fixup   Manorit Chawdhry
• [PATCH 1/2] include: env: ti: ti_common: Fix a missing semicolon   Manorit Chawdhry
• [PATCH 2/2] include: env: ti: add default for do_main_cpsw0_qsgmii_phyinit   Manorit Chawdhry
• [PATCH v7 15/17] configs: Add am69_sk_* defconfig fragments   Manorit Chawdhry
• [PATCH RFC] Kconfig: Add support for FIT image signature enforcing   Manorit Chawdhry
• [PATCH 0/2] Add save_uenv command   Manorit Chawdhry
• [PATCH 1/2] env: ti: mmc: add save_uenv command   Manorit Chawdhry
• [PATCH 2/2] doc: k3: update documentation for uEnv.txt   Manorit Chawdhry
• [RESEND PATCH v2] arm: mach-k3: j721s2_init: Support less than max DDR controllers   Manorit Chawdhry
• [PATCH] arm: socfpga: stratix10: SPI clock support   Chee, Tien Fong
• Pull request: SoCFPGA changes for commit 3c9bb8fbdc77f   Chee, Tien Fong
• Pull request: SoCFPGA changes for commit 3c9bb8fbdc77f   Chee, Tien Fong
• [PATCH 1/1] socfpga_de1_soc: Specify Uart clock in dts   Chee, Tien Fong
• [PATCH] board: sifive: spl: Initialized the PWM setting in the SPL stage   Nylon Chen
• [PATCH] doc: uefi: remove duplicate word "has"   Wei Ming Chen
• [PATCH] doc: uefi: remove ".py" suffix for pytest.py command   Wei Ming Chen
• [PATCH v2 0/2] SPL EBBR - EFI System Partition support   Mayuresh Chitale
• [PATCH v2 1/2] part: Add a function to find ESP partition   Mayuresh Chitale
• [PATCH v2 2/2] spl: Add support for booting from ESP   Mayuresh Chitale
• [PATCH v2 2/2] spl: Add support for booting from ESP   Mayuresh Chitale
• [PATCH v2 1/2] part: Add a function to find ESP partition   Mayuresh Chitale
• [PATCH v2 1/2] part: Add a function to find ESP partition   Mayuresh Chitale
• [PATCH v3 0/2] SPL EBBR - EFI System Partition support   Mayuresh Chitale
• [PATCH v3 1/2] part: Add a function to find ESP partition   Mayuresh Chitale
• [PATCH v3 2/2] spl: Add support for booting from ESP   Mayuresh Chitale
• [PATCH v7 2/2] schemas: Add some common reserved-memory usages   Chiu, Chasel
• [PATCH v7 2/2] schemas: Add some common reserved-memory usages   Chiu, Chasel
• [PATCH v7 2/2] schemas: Add some common reserved-memory usages   Chiu, Chasel
• [PATCH] ARM: dts: stm32: Fix reset for usart1 in scmi configuration   Patrice Chotard
• [PATCH] stm32mp2: Fix CONFIG_STM32MP25X flag usage   Patrice Chotard
• [PATCH] common: console: Fix print complete stdio device list   Patrice Chotard
• [PATCH v2] common: console: Fix print complete stdio device list   Patrice Chotard
• [PATCH] net: phy: the NC-SI phy device do not require mdio bus   Jacky Chou
• [PATCH v2 RESEND] mmc: dw_mmc: reset controller after data error   Jaehoon Chung
• [PATCH v2] mmc: sdhci-cadence: Add support for Cadence sdmmc v6   Jaehoon Chung
• [PATCH] mmc: Unconditionally call mmc_deinit()   Jaehoon Chung
• [PATCH 1/1] mmc: Avoid buffer overrun in mmc_startup()   Jaehoon Chung
• [PATCH v2] rockchip: rk35xx: expand space for decompressed kernel   Hugh Cole-Baker
• [PATCH 0/7] Add SE HMBSC board support   Caleb Connolly
• [PATCH v2 12/32] board: dragonboard410c: upstream DT compat   Caleb Connolly
• [PATCH] pytest: update requirements.txt   Caleb Connolly
• [PATCH v2 12/32] board: dragonboard410c: upstream DT compat   Caleb Connolly
• [PATCH v3 4/8] dts: Add alternative location for upstream DTB builds   Caleb Connolly
• [PATCH] mach-snapdragon: Move APQ8016 SoC derived board code   Caleb Connolly
• [PATCH] bootdev: avoid infinite probe loop   Caleb Connolly
• [resend PATCH] bootdev: avoid infinite probe loop   Caleb Connolly
• [resend PATCH] bootdev: avoid infinite probe loop   Caleb Connolly
• [PATCH] iommu: dont fail silently   Caleb Connolly
• [PATCH v2 00/32] Qualcomm generic board support   Caleb Connolly
• [PATCH] iommu: dont fail silently   Caleb Connolly
• [PATCH] boot: add support for button commands   Caleb Connolly
• [PATCH] iommu: dont fail silently   Caleb Connolly
• [PATCH] v2 test: spmi: fix tests   Caleb Connolly
• [PATCH v2 00/32] Qualcomm generic board support   Caleb Connolly
• [PATCH v2] boot: add support for button commands   Caleb Connolly
• [PATCH v2] boot: add support for button commands   Caleb Connolly
• [PATCH v4 2/7] usb: dwc3: Switch to device mode on gadget start   Caleb Connolly
• [PATCH] sandbox_flattree: enable button support   Caleb Connolly
• Please pull qcom-2024.04-rc1   Caleb Connolly
• [PATCH v2 13/32] board: dragonboard410c: import board code from mach-snapdragon   Caleb Connolly
• [PATCH v2 06/32] serial: msm: add debug UART   Caleb Connolly
• [PATCH v4 00/11] An effort to bring DT bindings compliance within U-Boot   Caleb Connolly
• [PATCH v3 00/36] Qualcomm generic board support   Caleb Connolly
• [PATCH v3 01/36] arm: init: export prev_bl_fdt_addr   Caleb Connolly
• [PATCH v3 02/36] usb: dwc3-generic: support external vbus regulator   Caleb Connolly
• [PATCH v3 03/36] mmc: msm_sdhci: use modern clock handling   Caleb Connolly
• [PATCH v3 04/36] dt-bindings: drop msm_sdhci binding   Caleb Connolly
• [PATCH v3 05/36] clk/qcom: use upstream compatible properties   Caleb Connolly
• [PATCH v3 06/36] clock/qcom: qcs404: fix clk_set_rate   Caleb Connolly
• [PATCH v3 07/36] serial: msm: add debug UART   Caleb Connolly
• [PATCH v3 08/36] serial: msm: fix clock handling   Caleb Connolly
• [PATCH v3 09/36] serial_msm: fix pinctrl   Caleb Connolly
• [PATCH v3 10/36] gpio: qcom_pmic: 1-based GPIOs   Caleb Connolly
• [PATCH v3 11/36] gpio: qcom_pmic: add a quirk to skip GPIO configuration   Caleb Connolly
• [PATCH v3 12/36] gpio: qcom_pmic: add pinctrl driver   Caleb Connolly
• [PATCH v3 13/36] board: dragonboard410c: add chainloaded config fragment   Caleb Connolly
• [PATCH v3 14/36] board: dragonboard410c: upstream DT compat   Caleb Connolly
• [PATCH v3 15/36] board: dragonboard410c: import board code from mach-snapdragon   Caleb Connolly
• [PATCH v3 16/36] board: dragonboard820c: use LINUX_KERNEL_IMAGE_HEADER   Caleb Connolly
• [PATCH v3 17/36] mach-snapdragon: generalise board support   Caleb Connolly
• [PATCH v3 18/36] mach-snapdragon: dynamic load addresses   Caleb Connolly
• [PATCH v3 19/36] mach-snapdragon: generate fdtfile automatically   Caleb Connolly
• [PATCH v3 20/36] mach-snapdragon: carve out no-map regions   Caleb Connolly
• [PATCH v3 21/36] doc: board/qualcomm: document generic targets   Caleb Connolly
• [PATCH v3 22/36] dt-bindings: import headers for SDM845   Caleb Connolly
• [PATCH v3 23/36] dts: sdm845: import supporting dtsi files   Caleb Connolly
• [PATCH v3 24/36] dts: sdm845: replace with upstream DTS   Caleb Connolly
• [PATCH v3 25/36] dt-bindings: import headers for MSM8916   Caleb Connolly
• [PATCH v3 26/36] dts: msm8916: import PMIC dtsi files   Caleb Connolly
• [PATCH v3 27/36] dts: msm8916: replace with upstream DTS   Caleb Connolly
• [PATCH v3 28/36] dt-bindings: import headers for MSM8996   Caleb Connolly
• [PATCH v3 29/36] dts: msm8996: import PMIC dtsi files   Caleb Connolly
• [PATCH v3 30/36] dts: dragonboard820c: use correct bindings for clocks   Caleb Connolly
• [PATCH v3 31/36] dts: msm8996: replace with upstream DTS   Caleb Connolly
• [PATCH v3 32/36] dt-bindings: import headers for qcs404   Caleb Connolly
• [PATCH v3 33/36] dts: qcs404-evb: replace with upstream DT   Caleb Connolly
• [PATCH v3 34/36] board: qcs404-evb: drop board code   Caleb Connolly
• [PATCH v3 35/36] pinctrl: qcom: fix DT compatibility   Caleb Connolly
• [PATCH v3 36/36] MAINTAINERS: Qualcomm: add some missing paths   Caleb Connolly
• [PATCH v3 20/36] mach-snapdragon: carve out no-map regions   Caleb Connolly
• [PATCH] button: qcom-pmic: fix some error checking   Caleb Connolly
• [PATCH 0/5] Qualcomm DWC3 USB support   Caleb Connolly
• [PATCH 1/5] usb: dwc3-generic: implement Qualcomm wrapper   Caleb Connolly
• [PATCH 2/5] usb: dwc3: select DM_USB_GADGET   Caleb Connolly
• [PATCH 3/5] usb: gadget: CDC ACM: call usb_gadget_initialize   Caleb Connolly
• [PATCH 4/5] usb: gadget: UMS: support multiple sector sizes   Caleb Connolly
• [PATCH 5/5] iommu: qcom-smmu: fix debugging   Caleb Connolly
• [PATCH 00/13] Qualcomm platform USB support   Caleb Connolly
• [PATCH 01/13] mailmap: update Bhupesh's email address   Caleb Connolly
• [PATCH 02/13] phy: qcom: add Qualcomm QUSB2 USB PHY driver   Caleb Connolly
• [PATCH 03/13] phy: qcom: Add USB HS 7nm PHY driver   Caleb Connolly
• [PATCH 04/13] clk/qcom: use offsets for RCG registers   Caleb Connolly
• [PATCH 05/13] clk/qcom: add gdsc_enable helper   Caleb Connolly
• [PATCH 06/13] clk/qcom: sdm845: add USB clocks   Caleb Connolly
• [PATCH 07/13] gpio: msm_gpio: add .set_flags op   Caleb Connolly
• [PATCH 08/13] serial: msm-geni: support livetree   Caleb Connolly
• [PATCH 09/13] mach-snapdragon: fixup USB nodes   Caleb Connolly
• [PATCH 10/13] dts: sdm845-db845c: add u-boot fixups   Caleb Connolly
• [PATCH 11/13] qcom_defconfig: regenerate with savedefconfig   Caleb Connolly
• [PATCH 12/13] qcom_defconfig: enable livetree   Caleb Connolly
• [PATCH 13/13] qcom_defconfig: enable USB   Caleb Connolly
• [PATCH 1/2] image-host: add a check of the return value of snprintf.   Hugo Cornelis
• [PATCH] image-host: refactor and protect for very long filenames   Hugo Cornelis
• Fwd: New Defects reported by Coverity Scan for Das U-Boot   Hugo Cornelis
• [PATCH] image-host: Fix error value paths and emit error messages to stderr.   Hugo Cornelis
• [PATCH] arm: sunxi: Reduce inrush current on Olimex A20-OLinuXino_MICRO   Philippe Coval
• [PATCH] arm: sunxi: Reduce inrush current on Olimex A20-OLinuXino_MICRO   Philippe Coval
• [PATCH] ARM: dts: stm32: Fix reset for usart1 in scmi configuration   Patrick DELAUNAY
• [PATCH 10/12] stm32mp: activate the command stboard for stm32mp25 boards   Patrick DELAUNAY
• [PATCH] stm32mp2: Fix CONFIG_STM32MP25X flag usage   Patrick DELAUNAY
• [PATCH] doc: dm: Fix typo   Alexander Dahl
• [RFC PATCH 00/16] Introduce ICSSG Ethernet driver   Andrew Davis
• [PATCH 1/2] board: ti: am62x: am62x.env: Fix boot_targets   Andrew Davis
• [PATCH v7 4/9] arm: dts: k3-binman: Add k3-security.h and include it in k3-binman.dtsi   Andrew Davis
• [PATCH 1/2] board: ti: am62x: am62x.env: Fix boot_targets   Andrew Davis
• [PATCH 01/10] board: ti: common: Introduce a common fdt ops library   Andrew Davis
• [PATCH 08/10] board: beagle: beagleboneai64: Set fdtfile from C code instead of findfdt script   Andrew Davis
• [PATCH v3 0/8] Suspend to RAM support for K3 J7200   Andrew Davis
• [PATCH v3 0/8] Suspend to RAM support for K3 J7200   Andrew Davis
• [PATCH RFC] Kconfig: Add support for FIT image signature enforcing   Andrew Davis
• [PATCH v8 15/16] configs: Add am69_sk_* defconfig fragments   Andrew Davis
• [PATCH v8 15/16] configs: Add am69_sk_* defconfig fragments   Andrew Davis
• [PATCH] firmware: ti_sci: fix the secure_hdr in do_xfer   Andrew Davis
• [PATCH v8 15/16] configs: Add am69_sk_* defconfig fragments   Andrew Davis
• [PATCH 0/1] Skip cleanup test if not built out of tree   Tobias Deiminger
• [PATCH 1/1] test: Skip cleanup test if not built out of tree   Tobias Deiminger
• [PATCH 00/12] stm32: add bsec and OTP support to stm32mp25   Patrick Delaunay
• [PATCH 01/12] arm64: dts: st: add bsec support to stm32mp25   Patrick Delaunay
• [PATCH 02/12] arm: stm32mp: add Rev.B support for STM32MP25   Patrick Delaunay
• [PATCH 03/12] stm32mp: bsec: add driver data   Patrick Delaunay
• [PATCH 04/12] stm32mp: bsec: add support of stm32mp25   Patrick Delaunay
• [PATCH 05/12] configs: stm32mp25: add support of fuse command   Patrick Delaunay
• [PATCH 06/12] stm32mp: add soc.c file   Patrick Delaunay
• [PATCH 07/12] stm32mp: add setup_serial_number for stm32mp25   Patrick Delaunay
• [PATCH 08/12] smt32mp: add setup_mac_address for stm32mp25   Patrick Delaunay
• [PATCH 09/12] stm32mp: stm32prog: add support of stm32mp25   Patrick Delaunay
• [PATCH 10/12] stm32mp: activate the command stboard for stm32mp25 boards   Patrick Delaunay
• [PATCH 11/12] board: st: stm32mp2: add checkboard   Patrick Delaunay
• [PATCH 12/12] board: st: stm32mp2: display the board identification   Patrick Delaunay
• [PATCH] smt32mp: Add dependencies on CMDLINE for command stm32key   Patrick Delaunay
• [PATCH v2 00/14] stm32: add bsec and OTP support to stm32mp25   Patrick Delaunay
• [PATCH v2 01/14] arm64: dts: st: add bsec support to stm32mp25   Patrick Delaunay
• [PATCH v2 02/14] arm: stm32mp: add Rev.B support for STM32MP25   Patrick Delaunay
• [PATCH v2 03/14] stm32mp: bsec: add driver data   Patrick Delaunay
• [PATCH v2 04/14] stm32mp: bsec: add support of stm32mp25   Patrick Delaunay
• [PATCH v2 05/14] configs: stm32mp25: add support of fuse command   Patrick Delaunay
• [PATCH v2 06/14] stm32mp: add soc.c file   Patrick Delaunay
• [PATCH v2 07/14] stm32mp: add setup_serial_number for stm32mp25   Patrick Delaunay
• [PATCH v2 08/14] smt32mp: add setup_mac_address for stm32mp25   Patrick Delaunay
• [PATCH v2 09/14] stm32mp: stm32prog: add support of stm32mp25   Patrick Delaunay
• [PATCH v2 10/14] stm32mp: activate the command stboard for stm32mp25 boards   Patrick Delaunay
• [PATCH v2 11/14] board: st: stm32mp2: add checkboard   Patrick Delaunay
• [PATCH v2 12/14] board: st: stm32mp2: display the board identification   Patrick Delaunay
• [PATCH v2 13/14] arm: Rename STM32MP13x   Patrick Delaunay
• [PATCH v2 14/14] arm: Rename STM32MP15x   Patrick Delaunay
• [PATCH v1] verdin-imx8mm: Remove stale fdt_addr env variable   Francesco Dolcini
• [PATCH 4/4] configs: am64x_evm_a53_defconfig: Enable NAND   Francesco Dolcini
• [PATCH v13 00/24] Modernize U-Boot shell   Francesco Dolcini
• [RFC][PATCH] ARM: imx: verdin-imx8mm: Set CAN oscillator frequency based on model   Francesco Dolcini
• [RFC][PATCH] ARM: imx: verdin-imx8mm: Set CAN oscillator frequency based on model   Francesco Dolcini
• [RFC][PATCH] ARM: imx: verdin-imx8mm: Set CAN oscillator frequency based on model   Francesco Dolcini
• [RFC][PATCH] ARM: imx: verdin-imx8mm: Set CAN oscillator frequency based on model   Francesco Dolcini
• [PATCH v1 0/4] board: verdin-am62: set cpu core voltage depending on speed grade   Francesco Dolcini
• [PATCH v13 00/24] Modernize U-Boot shell   Francesco Dolcini
• [PATCH] headers: don't depend on errno.h being available   Francesco Dolcini
• [PATCH v1 4/4] board: verdin-am62: set cpu core voltage depending on speed grade   Francesco Dolcini
• [PATCH] toradex: tdx-cfg-block: Add new apalis and colibri pid   Francesco Dolcini
• [PATCH v7] fdt: Allow the devicetree to come from a bloblist   Conor Dooley
• [PATCH v7] fdt: Allow the devicetree to come from a bloblist   Conor Dooley
• [PATCH v7] fdt: Allow the devicetree to come from a bloblist   Conor Dooley
• [PATCH v7] fdt: Allow the devicetree to come from a bloblist   Conor Dooley
• [PATCH v2 2/2] tools: binman: ti_board_cfg: Check for linting problems   Ryan Eatmon
• [Upstream] [PATCH v4 0/2] *** Add support for phyCORE-AM62x ***   Wadim Egorov
• [PATCH 0/2] *** Add support for phyCORE-AM64x ***   Wadim Egorov
• [PATCH 1/2] board: phytec: am64x: Add PHYTEC phyCORE-AM64x SoM   Wadim Egorov
• [PATCH 2/2] doc: board: phytec: Add phyCORE-AM64x   Wadim Egorov
• [PATCH 03/11] clk: renesas: Add R8A779H0 V4M clock tables   Mohammed Emad
• [PATHv11 00/43] net/lwip: add lwip library for the network stack   Fabio Estevam
• [PATCH v3 3/3] Add imx93-var-som support   Fabio Estevam
• [PATCH v3 1/3] spl: binman: Disable u_boot_any symbols for i.MX93 boards   Fabio Estevam
• [PATCH v3 2/3] mach-imx: Add i.MX93 binman support.   Fabio Estevam
• [PATCH] ARM: imx: Auto-detect PHY on Data Modul i.MX8M Mini/Plus eDM SBC   Fabio Estevam
• [PATCH v1] verdin-imx8mm: Remove stale fdt_addr env variable   Fabio Estevam
• [PATCH v4 0/3] Add imx93-var-som support   Fabio Estevam
• [PATCH v5 0/3] Add imx93-var-som support   Fabio Estevam
• [PATHv11 00/43] net/lwip: add lwip library for the network stack   Fabio Estevam
• inconsistent wget behavior   Fabio Estevam
• inconsistent wget behavior   Fabio Estevam
• inconsistent wget behavior   Fabio Estevam
• inconsistent wget behavior   Fabio Estevam
• inconsistent wget behavior   Fabio Estevam
• inconsistent wget behavior   Fabio Estevam
• [RFC PATCH V2] net: wget: Take in account tcp sequence number wrap around   Fabio Estevam
• [PATCH v5 0/3] Add imx93-var-som support   Fabio Estevam
• [PATHv11 00/43] net/lwip: add lwip library for the network stack   Fabio Estevam
• [PATCH v1] verdin-imx8mm: Remove stale fdt_addr env variable   Fabio Estevam
• [PATCH] ARM: imx: Auto-detect PHY on Data Modul i.MX8M Mini/Plus eDM SBC   Fabio Estevam
• [PATCH v5 0/3] Add imx93-var-som support   Fabio Estevam
• Pull request: Please pull u-boot-imx-master-20240108   Fabio Estevam
• [v2] Pull request: Please pull u-boot-imx-master-20240108   Fabio Estevam
• [PATCH 1/3] doc: imx93_var_som: Adjust the underline length   Fabio Estevam
• [PATCH 2/3] imx9: Select BINMAN at SoC level   Fabio Estevam
• [PATCH 3/3] imx8m: Select BINMAN at SoC level   Fabio Estevam
• inconsistent wget behavior   Fabio Estevam
• [PATCH v4 07/11] doc: devicetree: Align documentation to use Kconfig options   Fabio Estevam
• [PATCH v2 1/3] arm: xea: Move XEA's environment variables from xea.h to xea.env   Fabio Estevam
• [PATCH v2 1/3] arm: xea: Move XEA's environment variables from xea.h to xea.env   Fabio Estevam
• [PATCH] arm: imx: imx8m: Enable the SError exception   Fabio Estevam
• [PATCH] board: phytec: fix link error when disabling PHYTEC_SOM_DETECTION   Fabio Estevam
• [PATCH] arm: imx: imx8m: Enable the SError exception   Fabio Estevam
• [PATCH 1/3] doc: imx93_var_som: Adjust the underline length   Fabio Estevam
• [PATCH v2 0/3] This series adds support for the phyGATE-Tauri-L.   Fabio Estevam
• [PATCH 1/1] imx: imx9: fixup thermal trips from fuses   Fabio Estevam
• [PATCH] defconfig: xea: Change default spi-nor memory bus to 2 (single binary)   Fabio Estevam
• [PATCH] ARM: imx: Set stdio to serial on DH i.MX8M Plus DHCOM   Fabio Estevam
• [PATCH] ARM: imx: Set stdio to serial on Data Modul i.MX8M Mini/Plus eDM SBC   Fabio Estevam
• [RFC][PATCH] ARM: imx: verdin-imx8mm: Set CAN oscillator frequency based on model   Fabio Estevam
• [RFC][PATCH] ARM: imx: verdin-imx8mm: Set CAN oscillator frequency based on model   Fabio Estevam
• [PATCH v2] board: phytec: fix link error when disabling PHYTEC_SOM_DETECTION   Fabio Estevam
• [PATCH v3 1/3] arm: xea: Move XEA's environment variables from xea.h to xea.env   Fabio Estevam
• Pull request: Please pull u-boot-imx-20240115   Fabio Estevam
• [PATCH] Add Phytec i.MX93 support   Fabio Estevam
• Could you please help me in resolving the "arch/arm/lib/vectors.S:87: Error: no such instruction: `b reset' ?"   Fabio Estevam
• Could you please help me in resolving the "arch/arm/lib/vectors.S:87: Error: no such instruction: `b reset' ?"   Fabio Estevam
• Could you please help me in resolving the "arch/arm/lib/vectors.S:87: Error: no such instruction: `b reset' ?"   Fabio Estevam
• [PATCH] arm: imx: imx8m: Enable the SError exception   Fabio Estevam
• [PATCH 1/2] imx8m: Enable LTO by default   Fabio Estevam
• [PATCH 2/2] arm: imx: imx8m: Enable the SError exception   Fabio Estevam
• [PATCH 2/2] arm: imx: imx8m: Enable the SError exception   Fabio Estevam
• [PATCH] ARM: imx: Configure GIC clock parent on Data Modul i.MX8M Plus eDM SBC   Fabio Estevam
• [PATCH] ARM: imx: Enable SPL_BOARD_INIT on DH i.MX8M Plus DHCOM   Fabio Estevam
• [PATCH] wandboard: Convert to watchdog driver model   Fabio Estevam
• [PATCH] pico-dwarf/hobbit-imx6ul: Convert to CONFIG_DM_SERIAL   Fabio Estevam
• [PATCH v2] ARM: imx: Enable SPL_BOARD_INIT on DH i.MX8M Plus DHCOM   Fabio Estevam
• [PATCH v2] ARM: imx: Configure GIC clock parent on Data Modul i.MX8M Plus eDM SBC   Fabio Estevam
• [PATCH] ARM: imx: Enable kaslrseed command on DH i.MX8M Plus DHCOM   Fabio Estevam
• [PATCH] ARM: imx: Enable kaslrseed command on DH i.MX8M Plus DHCOM   Fabio Estevam
• [PATCH 1/2] imx8m: Enable LTO by default   Fabio Estevam
• [PATCH v2] ARM: imx: Configure GIC clock parent on Data Modul i.MX8M Plus eDM SBC   Fabio Estevam
• [PATCH] wandboard: Convert to watchdog driver model   Fabio Estevam
• [PATCH] pico-dwarf/hobbit-imx6ul: Convert to CONFIG_DM_SERIAL   Fabio Estevam
• [PATCH] ARM: imx: Enable kaslrseed command on DH i.MX8M Plus DHCOM   Fabio Estevam
• Pull request: Please pull u-boot-imx-20240115   Fabio Estevam
• Could you please help me in resolving the " /reset.c:42:(.text.do_reset+0x20): undefined reference to `reset_cpu'?"   Fabio Estevam
• Could you please help me in resolving the " /reset.c:42:(.text.do_reset+0x20): undefined reference to `reset_cpu'?"   Fabio Estevam
• [PATCH v3] board: phytec: phycore-imx93: Add phyBOARD-Segin-i.MX93 support   Fabio Estevam
• [PATCH v1] tools: mkimage: Add support for i.MXRT FlexSPI Header   Fabio Estevam
• [PATCH] toradex: tdx-cfg-block: Add new apalis and colibri pid   Fabio Estevam
• [PATCH v1] tools: mkimage: Add support for i.MXRT FlexSPI Header   Fabio Estevam
• [PATCH] toradex: tdx-cfg-block: Add new apalis and colibri pid   Fabio Estevam
• [PATCH] ARM: imx: Enable kaslrseed command on Data Modul i.MX8M Mini/Plus eDM SBC   Fabio Estevam
• [PATCH v1] tools: mkimage: Add support for i.MXRT FlexSPI Header   Fabio Estevam
• [PATCH v1 1/2] imx: imxrt1050-evk: Add support for SPI flash booting   Fabio Estevam
• [PATCH v1 2/2] imx: imxrt1050-evk: Add documentation for SPI boot   Fabio Estevam
• [PATCH v1 1/2] imx: imxrt1050-evk: Add support for SPI flash booting   Fabio Estevam
• [PATCH 1/3] phycore-imx8mp: add USB host support   Fabio Estevam
• [PATCH 2/3] phycore-imx8mp: add USB mass storage support   Fabio Estevam
• [PATCH 3/3] phycore-imx8mp: add support for booting and flashing emmc via UUU   Fabio Estevam
• [PATCH v2] imx: imx8mp: Add support for Polyhex Debix Model A SBC   Fabio Estevam
• [PATCH v4 1/6] rpi5: add initial memory map for bcm2712   Florian Fainelli
• [PATCH v4 2/6] rpi5: Use devicetree as alternative way to read IO base addresses   Florian Fainelli
• [PATCH v6 0/4] Add imx93-var-som support   Peng Fan
• [PATCH 1/3] doc: imx93_var_som: Adjust the underline length   Peng Fan
• [PATCH 2/3] imx9: Select BINMAN at SoC level   Peng Fan
• [PATCH 3/3] imx8m: Select BINMAN at SoC level   Peng Fan
• FIELD_RETURN on i.MX8MNANOLPD4 EVK   Peng Fan
• [PATCH v9 2/2] arm64: boot: Support Flat Image Tree   Ahmad Fatoum
• Passing boot logs to Linux?   Ahmad Fatoum
• [PATCH 0/1] riscv: Support building with Clang   kleines Filmröllchen
• [PATCH 1/1] riscv: Support building with Clang   kleines Filmröllchen
• [PATCH v2 0/1] riscv: Support building with Clang   kleines Filmröllchen
• [PATCH v2 1/1] riscv: Support building with Clang   kleines Filmröllchen
• [PATCH v4] drivers: pci: Fix dm_pci_map_bar() to support 64b BARs   Moritz Fischer
• [PATCH v2 RESEND 1/2] nvme: Fix error code and log to indicate busy   Moritz Fischer
• [PATCH v2 RESEND 2/2] nvme: Update nvme_scan_namespace to keep trying on busy   Moritz Fischer
• [PATCH v2 RESEND 2/2] nvme: Update nvme_scan_namespace to keep trying on busy   Moritz Fischer
• [PATCH 0/1] i.MX9 thermal trip fixups   Primoz Fiser
• [PATCH 1/1] imx: imx9: fixup thermal trips from fuses   Primoz Fiser
• [PATCH] Add Phytec i.MX93 support   Primoz Fiser
• [PATCH v2] Add Phytec i.MX93 support   Primoz Fiser
• [PATCH v3] board: phytec: phycore-imx93: Add phyBOARD-Segin-i.MX93 support   Primoz Fiser
• [PATCH v3] board: phytec: phycore-imx93: Add phyBOARD-Segin-i.MX93 support   Primoz Fiser
• [PATCH] imx9: clock: Fix board_interface_eth_init for FEC   Primoz Fiser
• [PATCH v3] board: phytec: phycore-imx93: Add phyBOARD-Segin-i.MX93 support   Primoz Fiser
• [PATCH v3] board: phytec: phycore-imx93: Add phyBOARD-Segin-i.MX93 support   Primoz Fiser
• [PATCH v1] tools: mkimage: Add support for i.MXRT FlexSPI Header   Adam Ford
• [PATCH v1] tools: mkimage: Add support for i.MXRT FlexSPI Header   Adam Ford
• [PATCH v1] tools: mkimage: Add support for i.MXRT FlexSPI Header   Adam Ford
• [PATCH v7 09/17] board: ti: j748s4: Add board config yaml files   Neha Malcom Francis
• [PATCH 0/2] binman: ti_board_cfg: Add yamllint support   Neha Malcom Francis
• [PATCH 1/2] board: ti: *-cfg.yaml: Adhere to yamllint rules   Neha Malcom Francis
• [PATCH 2/2] tools: binman: ti_board_cfg: Check for linting problems   Neha Malcom Francis
• [PATCH 2/2] tools: binman: ti_board_cfg: Check for linting problems   Neha Malcom Francis
• [PATCH v2 0/2] binman: ti_board_cfg: Add yamllint support   Neha Malcom Francis
• [PATCH v2 1/2] board: ti: *-cfg.yaml: Adhere to yamllint rules   Neha Malcom Francis
• [PATCH v2 2/2] tools: binman: ti_board_cfg: Check for linting problems   Neha Malcom Francis
• [PATCH] arm: mach-k3: j721s2_init: Support less than max DDR controllers   Neha Malcom Francis
• [PATCH] arm: mach-k3: j721s2_init: Support less than max DDR controllers   Neha Malcom Francis
• [PATCH v2] arm: mach-k3: j721s2_init: Support less than max DDR controllers   Neha Malcom Francis
• [PATCH v2] arm: mach-k3: j721s2_init: Support less than max DDR controllers   Neha Malcom Francis
• [RESEND PATCH v2] arm: mach-k3: j721s2_init: Support less than max DDR controllers   Neha Malcom Francis
• [PATCH v2 00/32] Qualcomm generic board support   Ramon Fried
• [PATCH v2 13/32] board: dragonboard410c: import board code from mach-snapdragon   Ramon Fried
• [PATCH v2 03/32] mmc: msm_sdhci: use modern clock handling   Ramon Fried
• [PATCH v2 06/32] serial: msm: add debug UART   Ramon Fried
• [PATCH v3 07/11] lib: vsprintf: enable '%pbl' format specifier   Lukas Funke
• [PATCH 00/18] FWU: Migrate FWU metadata to version 2   Sughosh Ganu
• [PATCH 01/18] configs: fwu: Remove FWU configs for metadata V2 migration   Sughosh Ganu
• [PATCH 02/18] fwu: metadata: Migrate to version 2 of the structure   Sughosh Ganu
• [PATCH 03/18] drivers: fwu: Add the size parameter to the metadata access API's   Sughosh Ganu
• [PATCH 04/18] fwu: Add some API's for metadata version 2 access   Sughosh Ganu
• [PATCH 05/18] lib: fwu: Make changes to support version 2 of FWU metadata   Sughosh Ganu
• [PATCH 06/18] drivers: fwu: mtd: Allocate buffer for image info dynamically   Sughosh Ganu
• [PATCH 07/18] drivers: fwu: Allocate memory for metadata copies   Sughosh Ganu
• [PATCH 08/18] fwu: Add a function to put a bank in Trial State   Sughosh Ganu
• [PATCH 09/18] capsule: Accept a bank on a successful update   Sughosh Ganu
• [PATCH 10/18] fwu: mtd: Modify the DFU API's to align with metadata version 2   Sughosh Ganu
• [PATCH 11/18] efi_firmware: fwu: Do not read FWU metadata on sandbox   Sughosh Ganu
• [PATCH 12/18] efi_firmware: fwu: Get the number of FWU banks at runtime   Sughosh Ganu
• [PATCH 13/18] cmd: fwu: Align the command with metadata version 2   Sughosh Ganu
• [PATCH 14/18] test: fwu: Align the FWU metadata access test with version 2   Sughosh Ganu
• [PATCH 15/18] fwu: Remove the config symbols for number of banks and images   Sughosh Ganu
• [PATCH 16/18] tools: mkfwumdata: Migrate to metadata version 2   Sughosh Ganu
• [PATCH 17/18] configs: fwu: Re-enable FWU configs   Sughosh Ganu
• [PATCH 18/18] doc: fwu: Make changes for supporting FWU Metadata version 2   Sughosh Ganu
• [PATCH 2/4] doc: Document capsule generation through a config file   Sughosh Ganu
• [PATCH 00/18] FWU: Migrate FWU metadata to version 2   Sughosh Ganu
• [PATCH 01/60] arm: dts: mt7988-sd-rfb: add SD pin driving settings   Weijie Gao
• [PATCH 02/60] net: mediatek: add support for adjusting MDIO clock   Weijie Gao
• [PATCH 03/60] net: mediatek: add support for XGMII interface   Weijie Gao
• [PATCH v2 12/32] board: dragonboard410c: upstream DT compat   Sumit Garg
• [PATCH v3 4/8] dts: Add alternative location for upstream DTB builds   Sumit Garg
• [PATCH v3 4/8] dts: Add alternative location for upstream DTB builds   Sumit Garg
• [PATCH v3 4/8] dts: Add alternative location for upstream DTB builds   Sumit Garg
• [PATCH] mach-snapdragon: Move APQ8016 SoC derived board code   Sumit Garg
• [PATCH v3 0/8] An effort to bring DT bindings compliance within U-Boot   Sumit Garg
• [PATCH v3 5/8] doc: devicetree: Updates for devicetree-rebasing subtree   Sumit Garg
• [PATCH v3 4/8] dts: Add alternative location for upstream DTB builds   Sumit Garg
• [PATCH v3 5/8] doc: devicetree: Updates for devicetree-rebasing subtree   Sumit Garg
• [PATCH v3 5/8] doc: devicetree: Updates for devicetree-rebasing subtree   Sumit Garg
• [PATCH v2 00/32] Qualcomm generic board support   Sumit Garg
• [PATCH] mach-snapdragon: Move APQ8016 SoC derived board code   Sumit Garg
• [PATCH v3 3/8] scripts/Makefile.lib: Statically define *-u-boot.dtsi files location   Sumit Garg
• [PATCH v3 3/8] scripts/Makefile.lib: Statically define *-u-boot.dtsi files location   Sumit Garg
• [PATCH v2 00/32] Qualcomm generic board support   Sumit Garg
• [PATCH v4 00/11] An effort to bring DT bindings compliance within U-Boot   Sumit Garg
• [PATCH v4 01/11] CI: Exclude devicetree-rebasing subtree for CONFIG checks   Sumit Garg
• [PATCH v4 02/11] Makefile: Add support for DT bindings schema checks   Sumit Garg
• [PATCH v4 03/11] scripts/Makefile.lib: Statically define *-u-boot.dtsi files location   Sumit Garg
• [PATCH v4 04/11] Makefile: Allow upstream DT subtree to provide DT includes   Sumit Garg
• [PATCH v4 05/11] dts: Add alternative location for upstream DTB builds   Sumit Garg
• [PATCH v4 06/11] dts: Add script to uprev dts/upstream subtree   Sumit Garg
• [PATCH v4 07/11] doc: devicetree: Align documentation to use Kconfig options   Sumit Garg
• [PATCH v4 08/11] doc: devicetree: Updates for devicetree-rebasing subtree   Sumit Garg
• [PATCH v4 09/11] MAINTAINERS: Add myself as devicetree-rebasing maintainer   Sumit Garg
• [PATCH v4 10/11] dts: meson-gxbb: Switch to using upstream DT   Sumit Garg
• [PATCH v4 11/11] dts: meson-gxbb: Drop redundant devicetree files   Sumit Garg
• [PATCH v4 07/11] doc: devicetree: Align documentation to use Kconfig options   Sumit Garg
• [PATCH v2 00/32] Qualcomm generic board support   Sumit Garg
• [PATCH v2 00/32] Qualcomm generic board support   Sumit Garg
• [PATCH v4 00/11] An effort to bring DT bindings compliance within U-Boot   Sumit Garg
• [PATCH v4 00/11] An effort to bring DT bindings compliance within U-Boot   Sumit Garg
• [PATCH v4 00/11] An effort to bring DT bindings compliance within U-Boot   Sumit Garg
• [PATCH v4 00/11] An effort to bring DT bindings compliance within U-Boot   Sumit Garg
• [PATCH v4 00/11] An effort to bring DT bindings compliance within U-Boot   Sumit Garg
• [PATCH v4 00/11] An effort to bring DT bindings compliance within U-Boot   Sumit Garg
• [PATCH v5 12/12] efi: Correct smbios-table installation   Simon Glass
• [PATCH v5 00/12] smbios: Deal with tables beyond 4GB   Simon Glass
• [PATCH v2 10/10] Makefile: Use the fdtgrep -u flag   Simon Glass
• [PATCH 07/10] fdtgrep: Move property checking into a function   Simon Glass
• [PATCH 09/10] fdtgrep: Allow propagating properties up to supernodes   Simon Glass
• [PATCH 08/10] sandbox: Correct SPL condition for building devicetree   Simon Glass
• [PATCH 05/10] fdtgrep: Tidy up comment for h_include()   Simon Glass
• [PATCH 06/10] fdtgrep: Simplify code to inverting the match   Simon Glass
• [PATCH 03/10] fdtgrep: Correct ordering of flags   Simon Glass
• [PATCH 04/10] fdtgrep: Correct references to fdt_find_regions()   Simon Glass
• [PATCH 02/10] fdtgrep: Tidy up a few type warnings and comments   Simon Glass
• [PATCH 1/1] buildman: type cotaining   Simon Glass
• [PATCH 1/1] binman: used-before-assignment in ftest.py   Simon Glass
• [PATCH 01/10] x86: coral: Align bootph SPI-flash subnodes with parent   Simon Glass
• [PATCH v5 10/11] bloblist: Add alignment to bloblist_new()   Simon Glass
• [PATCH v5 11/11] bloblist: Update documentation and header comment   Simon Glass
• [PATCH v5 08/11] bloblist: Reduce blob-header size   Simon Glass
• [PATCH v5 09/11] bloblist: Adjust the bloblist header   Simon Glass
• [PATCH v5 05/11] bloblist: Access record hdr_size and tag via a function   Simon Glass
• [PATCH v5 06/11] bloblist: Checksum the entire bloblist   Simon Glass
• [PATCH v5 07/11] bloblist: Handle alignment with a void entry   Simon Glass
• [PATCH v5 04/11] bloblist: Set version to 1   Simon Glass
• [PATCH v5 03/11] bloblist: Change the magic value   Simon Glass
• [PATCH v5 01/11] bloblist: Update the tag numbering   Simon Glass
• [PATCH v5 02/11] bloblist: Adjust API to align in powers of 2   Simon Glass
• Please pull u-boot-dm next   Simon Glass
• [PATCH v3 4/8] dts: Add alternative location for upstream DTB builds   Simon Glass
• [PATCH v2 1/2] smbios: smbios.h should not import ofnode.h   Simon Glass
• [PATCH v2 2/2] efi_loader: provide tool to dump SMBIOS table   Simon Glass
• [PATCH v5 04/12] smbios: Use SMBIOS 3.0 to support an address above 4GB   Simon Glass
• [PATCH 1/1] x86: all firmware tables must be paragraph aligned   Simon Glass
• [PATCH 1/1] cmd: fdt: check fdt address   Simon Glass
• [PATCH v3] test/py: i2c: Add tests for i2c command   Simon Glass
• [PATCH v6 4/6] common: console: record console from the beginning   Simon Glass
• [PATCH v3 4/8] dts: Add alternative location for upstream DTB builds   Simon Glass
• Setting up boot chain ACPI on ARM with STM32MPU   Simon Glass
• [PATCH v2 2/2] efi_loader: provide tool to dump SMBIOS table   Simon Glass
• [PATCH 0/9] dts: Move to SoC-specific build rules   Simon Glass
• [PATCH v3 4/8] dts: Add alternative location for upstream DTB builds   Simon Glass
• [PATCH v9 2/2] arm64: boot: Support Flat Image Tree   Simon Glass
• [PATCH 0/9] dts: Move to SoC-specific build rules   Simon Glass
• [PATCH v3 4/8] dts: Add alternative location for upstream DTB builds   Simon Glass
• [PATCH v7 2/2] schemas: Add some common reserved-memory usages   Simon Glass
• vexpress and DM_SERIAL   Simon Glass
• [PATCH v6 4/6] common: console: record console from the beginning   Simon Glass
• [PATCH 0/9] dts: Move to SoC-specific build rules   Simon Glass
• [PATCH v3 4/8] dts: Add alternative location for upstream DTB builds   Simon Glass
• [PATCH v7] fdt: Allow the devicetree to come from a bloblist   Simon Glass
• [PATCH 00/34] x86: expo: Add support for editing coreboot CMOS RAM settings   Simon Glass
• [PATCH v6 0/7] Resolve issues with booting distros on x86   Simon Glass
• [PATCH v6 1/7] x86: coreboot: Add a boot script   Simon Glass
• [PATCH v6 2/7] video: Correct setting of cursor position   Simon Glass
• [PATCH v6 3/7] video: Drop unnecessary truetype operations from SPL   Simon Glass
• [PATCH v6 4/7] x86: Enable SSE in 64-bit mode   Simon Glass
• [PATCH v6 5/7] x86: coreboot: Enable truetype fonts   Simon Glass
• [PATCH v6 6/7] x86: qemu: Expand ROM size   Simon Glass
• [PATCH v6 7/7] x86: qemu: Enable truetype fonts   Simon Glass
• [PATCH v2 00/19] x86: expo: Add support for editing coreboot CMOS RAM settings   Simon Glass
• [PATCH v2 01/19] video: Add a dark-grey console colour   Simon Glass
• [PATCH v2 02/19] video: Avoid starting a new line to close to the bottom   Simon Glass
• [PATCH v2 03/19] expo: Place menu items to the right of all labels   Simon Glass
• [PATCH v2 04/19] expo: Set the initial next_id to 1   Simon Glass
• [PATCH v2 05/19] expo: Use standard numbering for save and discard   Simon Glass
• [PATCH v2 06/19] expo: Allow menu items to have values   Simon Glass
• [PATCH v2 07/19] expo: Add a little more cedit CMOS logging   Simon Glass
• [PATCH v2 08/19] expo: Support menu-item values in cedit   Simon Glass
• [PATCH v2 09/19] expo: Drop unneceesary calls to expo_str()   Simon Glass
• [PATCH v2 10/19] expo: Drop scene_title_set()   Simon Glass
• [PATCH v2 11/19] expo: Add forward declaration for udevice to cedit   Simon Glass
• [PATCH v2 12/19] x86: coreboot: Enable unit tests   Simon Glass
• [PATCH v2 13/19] x86: CI: Update coreboot   Simon Glass
• [PATCH v2 14/19] x86: coreboot: Add a test for cbsysinfo command   Simon Glass
• [PATCH v2 15/19] x86: coreboot: Show the option table   Simon Glass
• [PATCH v2 16/19] x86: coreboot: Enable support for the configuration editor   Simon Glass
• [PATCH v2 17/19] x86: coreboot: Add a command to check and update CMOS RAM   Simon Glass
• [PATCH v2 18/19] x86: coreboot: Allow building an expo for editing CMOS config   Simon Glass
• [PATCH v2 19/19] x86: Enable RTC command by default   Simon Glass
• booti usage offset requirements for compressed kernel and initrd with dtb   Simon Glass
• [resend PATCH] bootdev: avoid infinite probe loop   Simon Glass
• [PATCH v6 1/3] dt-bindings: mtd: partitions: Add binman compatible   Simon Glass
• [PATCH v2 00/19] x86: expo: Add support for editing coreboot CMOS RAM settings   Simon Glass
• [PATCH v2 00/19] x86: expo: Add support for editing coreboot CMOS RAM settings   Simon Glass
• [PATCH 1/2] video: Allow querying the font size   Simon Glass
• [PATCH 2/2] coreboot: Switch to a monospaced font   Simon Glass
• [PATCH v7] fdt: Allow the devicetree to come from a bloblist   Simon Glass
• [PATCH v5 12/12] efi: Correct smbios-table installation   Simon Glass
• [PATCH v5 11/12] acpi: Write pointers to tables instead of addresses   Simon Glass
• [PATCH v5 10/12] acpi: Rename test dm_test_setup_ctx_and_base_tables()   Simon Glass
• [PATCH v5 09/12] efi: smbios: Drop support for SMBIOS2 tables   Simon Glass
• [PATCH v5 07/12] smbios: Require the caller to align the SMBIOS table   Simon Glass
• [PATCH v5 08/12] smbios: Drop support for SMBIOS2 tables   Simon Glass
• [PATCH v5 06/12] efi: Use the correct GUID for the SMBIOS table   Simon Glass
• [PATCH v5 05/12] smbios: Correct gd_smbios_start()   Simon Glass
• [PATCH v5 04/12] smbios: Use SMBIOS 3.0 to support an address above 4GB   Simon Glass
• [PATCH v5 03/12] smbios: SMBIOS 3.0 (64-bit) Entry Point structure   Simon Glass
• [PATCH v5 02/12] smbios: Move the rest of the SMBIOS2 code   Simon Glass
• [PATCH v5 01/12] smbios: Refactor 32-bit code into an else statement   Simon Glass
• [PATCH v4 9/9] arm: enable support for QEMU firmware tables   Simon Glass
• [PATCH v4 8/9] configs: qemu: add config fragment for ACPI   Simon Glass
• [PATCH v4 7/9] riscv: allow usage of ACPI   Simon Glass
• [PATCH v4 6/9] riscv: add support for QEMU firmware tables   Simon Glass
• [PATCH v4 5/9] acpi: enable writing ACPI tables on QEMU   Simon Glass
• [PATCH v4 4/9] riscv: add ACPI fields to global data   Simon Glass
• [PATCH v4 3/9] arm: add ACPI fields to global data   Simon Glass
• [PATCH v3 4/4] acpi: support 64bit in acpi_find_table for DSDT and FACS   Simon Glass
• [PATCH v4 1/9] acpi: Kconfig symbol CONFIG_QFW_ACPI   Simon Glass
• [PATCH v4 2/9] acpi: carve out qfw_acpi.c   Simon Glass
• [PATCH v3 3/4] cmd: acpi: check HW reduced flag in acpi list   Simon Glass
• [PATCH v3 2/4] cmd: acpi: fix listing DSDT and FACS   Simon Glass
• [PATCH v3 1/4] acpi: use 64-bit addresses in FADT table   Simon Glass
• Please pull u-boot-dm/next   Simon Glass
• [PATCH v9 2/2] arm64: boot: Support Flat Image Tree   Simon Glass
• [PATCH v9 2/2] arm64: boot: Support Flat Image Tree   Simon Glass
• [PATCH] firmware: ti_sci: fix the secure_hdr in do_xfer   Dhruva Gole
• [PATCH V2] firmware: ti_sci: fix the secure_hdr in do_xfer   Dhruva Gole
• [PATCH] firmware: ti_sci: fix the secure_hdr in do_xfer   Dhruva Gole
• [PATCH V3] firmware: ti_sci: fix the secure_hdr in do_xfer   Dhruva Gole
• [PATCH] firmware: ti_sci: fix the secure_hdr in do_xfer   Dhruva Gole
• [PATCH] firmware: ti_sci: fix the secure_hdr in do_xfer   Dhruva Gole
• [PATCH] firmware: ti_sci: fix the secure_hdr in do_xfer   Dhruva Gole
• [PATCH V3] firmware: ti_sci: fix the secure_hdr in do_xfer   Dhruva Gole
• [PATCH V4 0/2] firmware: ti_sci: zero the secure_hdr in do_xfer   Dhruva Gole
• [PATCH V4 1/2] firmware: ti_sci: fix the secure_hdr in do_xfer   Dhruva Gole
• [PATCH V4 2/2] firmware: ti_sci: Add comment explaining the is_secure code   Dhruva Gole
• [PATCH V5 0/2] firmware: ti_sci: zero the secure_hdr in do_xfer   Dhruva Gole
• [PATCH V5 1/2] firmware: ti_sci: fix the secure_hdr in do_xfer   Dhruva Gole
• [PATCH V5 2/2] firmware: ti_sci: Add comment explaining the is_secure code   Dhruva Gole
• [PATCH] toradex: tdx-cfg-block: Add new apalis and colibri pid   Joao Paulo Goncalves
• [PATCH] toradex: tdx-cfg-block: add 0086 i.mx8m mini sku   Joao Paulo Goncalves
• usb3 device not detected on usb2 port   Stephen Graf
• [PATCH RFC 0/6] video: Add UTF-8 support for UEFI applications   Janne Grunau
• [PATCH] sunxi: add defconfig for nanopi_duo2   Chuanhong Guo
• [PATCH] firmware: ti_sci: fix the secure_hdr in do_xfer   Kamlesh Gurudasani
• [PATCH 0/3] phycore-imx8mp: Add USB support   Benjamin Hahn
• [PATCH 1/3] phycore-imx8mp: add USB host support   Benjamin Hahn
• [PATCH 2/3] phycore-imx8mp: add USB mass storage support   Benjamin Hahn
• [PATCH 3/3] phycore-imx8mp: add support for booting and flashing emmc via UUU   Benjamin Hahn
• [PATCH v2 0/4] phycore-imx8mp: Add USB support   Benjamin Hahn
• [PATCH v2 1/4] imx8mp-phyboard-pollux-rdk: sync with kernel devicetree from v6.8-rc2   Benjamin Hahn
• [PATCH v2 2/4] phycore-imx8mp: add USB host support   Benjamin Hahn
• [PATCH v2 3/4] phycore-imx8mp: add USB mass storage support   Benjamin Hahn
• [PATCH v2 4/4] phycore-imx8mp: add support for booting and flashing emmc via UUU   Benjamin Hahn
• test/py framework hangs on some tests with tbot integration   Adnan El Hammoudi
• [PATCH v7 2/2] schemas: Add some common reserved-memory usages   Rob Herring
• [PATCH v3 5/8] doc: devicetree: Updates for devicetree-rebasing subtree   Rob Herring
• [PATCH V3 1/6] dt-bindings: nvmem: layouts: add U-Boot environment variables layout   Rob Herring
• [PATCH V3 1/6] dt-bindings: nvmem: layouts: add U-Boot environment variables layout   Rob Herring
• [PATCH v6 1/3] dt-bindings: mtd: partitions: Add binman compatible   Rob Herring
• [PATCH v4 00/11] An effort to bring DT bindings compliance within U-Boot   Rob Herring
• [PATCH v9 2/2] arm64: boot: Support Flat Image Tree   Rob Herring
• [PATCH 4/4] mtd: nand: raw: atmel: Remove duplicate definitions   Eugen Hristev
• [PATCH 0/4] Facilitate new atmel raw nand driver for SAMA5D2   Eugen Hristev
• [PATCH 1/3] rockchip: rk35xx: Remove use of eMMC DDR52 mode   Eugen Hristev
• [PATCH 6/7] rockchip: rk3588: Add default u-boot,spl-boot-order prop   Eugen Hristev
• [PULL] u-boot-at91-2024.04-a   Eugen Hristev
• [PATCH 1/2] board: ti: am62x: am62x.env: Fix boot_targets   Jon Humphreys
• [PATCH 01/10] board: ti: common: Introduce a common fdt ops library   Jon Humphreys
• [PATCH 08/10] board: beagle: beagleboneai64: Set fdtfile from C code instead of findfdt script   Jon Humphreys
• [PATCH 02/10] board: ti: am62ax: Set fdtfile from C code instead of findfdt script   Jon Humphreys
• [PATCH V2 01/10] board: ti: common: Introduce a common fdt ops library   Jon Humphreys
• [PATCH V2 02/10] board: ti: am62ax: Set fdtfile from C code instead of findfdt script   Jon Humphreys
• [PATCH V2 03/10] board: ti: am62x: Set fdtfile from C code instead of findfdt script   Jon Humphreys
• [PATCH V2 04/10] board: ti: am64x: Set fdtfile from C code instead of findfdt script   Jon Humphreys
• [PATCH V2 05/10] board: ti: am65x: Set fdtfile from C code instead of findfdt script   Jon Humphreys
• [PATCH V2 06/10] board: ti: j721e: Set fdtfile from C code instead of findfdt script   Jon Humphreys
• [PATCH V2 07/10] board: ti: j721s2: Set fdtfile from C code instead of findfdt script   Jon Humphreys
• [PATCH V2 08/10] board: beagle: beagleboneai64: Set fdtfile from C code instead of findfdt script   Jon Humphreys
• [PATCH V2 09/10] board: beagle: beagleplay: Set fdtfile from C code instead of findfdt script   Jon Humphreys
• [PATCH V2 10/10] include: env: ti: Drop default_findfdt   Jon Humphreys
• [PATCH] ARM: dts: ast2600: add dts for asus product   Kelly Hung
• [PATCH] dts: ast2600: add x4tf dts for asus product   Kelly Hung
• [PATCH v4 0/6] rpi5: initial support   Ivan T. Ivanov
• [PATCH v4 1/6] rpi5: add initial memory map for bcm2712   Ivan T. Ivanov
• [PATCH v4 2/6] rpi5: Use devicetree as alternative way to read IO base addresses   Ivan T. Ivanov
• [PATCH v4 3/6] rpi5: Use devicetree to retrieve board revision   Ivan T. Ivanov
• [PATCH v4 4/6] bcm2835: Dynamically calculate bytes per pixel parameter   Ivan T. Ivanov
• [PATCH v4 5/6] mmc: bcmstb: Add support for bcm2712 SD controller   Ivan T. Ivanov
• [PATCH v4 6/6] configs: rpi_arm64: enable SDHCI BCMSTB driver   Ivan T. Ivanov
• [PATCH v4 5/6] mmc: bcmstb: Add support for bcm2712 SD controller   Ivan T. Ivanov
• [PATCH v4 2/6] rpi5: Use devicetree as alternative way to read IO base addresses   Ivan T. Ivanov
• [PATCH v4 5/6] mmc: bcmstb: Add support for bcm2712 SD controller   Ivan T. Ivanov
• [PATCH v4 0/6] rpi5: initial support   Ivan T. Ivanov
• [PATCH v4 0/6] rpi5: initial support   Ivan T. Ivanov
• [PATCH v4 0/6] rpi5: initial support   Ivan T. Ivanov
• [PATCH v4 0/6] rpi5: initial support   Ivan T. Ivanov
• [PATCH v4 0/6] rpi5: initial support   Ivan T. Ivanov
• [PATCH v4 0/6] rpi5: initial support   Ivan T. Ivanov
• [PATCH v4 0/6] rpi5: initial support   Ivan T. Ivanov
• [PATCH v4 0/6] rpi5: initial support   Ivan T. Ivanov
• [PATCH v4 0/6] rpi5: initial support   Ivan T. Ivanov
• [PATCH v4 0/6] rpi5: initial support   Ivan T. Ivanov
• [PATCH v4 0/6] rpi5: initial support   Ivan T. Ivanov
• [PATCH v5 0/7] rpi5: initial support   Ivan T. Ivanov
• [PATCH v5 1/7] rpi5: add initial memory map for bcm2712   Ivan T. Ivanov
• [PATCH v5 2/7] rpi5: Use devicetree as alternative way to read IO base addresses   Ivan T. Ivanov
• [PATCH v5 3/7] rpi5: Use devicetree to retrieve board revision   Ivan T. Ivanov
• [PATCH v5 4/7] bcm2835: Dynamically calculate bytes per pixel parameter   Ivan T. Ivanov
• [PATCH v5 5/7] mmc: bcmstb: Add support for bcm2712 SD controller   Ivan T. Ivanov
• [PATCH v5 6/7] configs: rpi_arm64: enable SDHCI BCMSTB driver   Ivan T. Ivanov
• [PATCH v5 7/7] configs: rpi_arm64: build position independent code   Ivan T. Ivanov
• [EXTERNAL] Re: [PATCH V6 00/10] Update SPL splashscreen framework for AM62x   Nikhil Jain
• [PATCH v2] common: splash_source: Don't compile ubifs splash cmd for SPL build   Nikhil Jain
• [PATCH] video: tidss: Use DT property names for parsing nodes   Nikhil Jain
• [PATCH] board: starfive: handle compatible property in dynamic DT configuration   Aurelien Jarno
• [PATCH] riscv: qemu: enable booting on a second virtio device   Aurelien Jarno
• [PATCH] board: starfive: handle compatible property in dynamic DT configuration   Aurelien Jarno
• [PATCH] configs: visionfive2: Disable ENV_IS_NOWHERE   Aurelien Jarno
• [PATCH 00/10] ECC Series   Santhosh Kumar K
• [PATCH 01/10] ram: k3-ddrss: Use the DDR controller BIST engine for ECC priming   Santhosh Kumar K
• [PATCH 02/10] ram: k3-ddrss: Add k3_ddrss_ddr_bank_base_size_calc() to solve 'calculations restricted to 32 bits' issue   Santhosh Kumar K
• [PATCH 03/10] ram: k3-ddrss: Setup ECC region start and range   Santhosh Kumar K
• [PATCH 04/10] ram: k3-ddrss: Enable ECC interrupts   Santhosh Kumar K
• [PATCH 05/10] drivers: ram: Kconfig: Add CONFIG_K3_INLINE_ECC   Santhosh Kumar K
• [PATCH 06/10] board: ti: common: k3-ddr-init: Pull redundant DDR functions to a common location   Santhosh Kumar K
• [PATCH 07/10] board: ti: am64x: evm: Remove redundant DDR functions   Santhosh Kumar K
• [PATCH 08/10] board: ti: am62x: evm: Remove redundant DDR functions   Santhosh Kumar K
• [PATCH 09/10] board: ti: am62ax: evm: Fixup DDR size when ECC is enabled   Santhosh Kumar K
• [PATCH 10/10] arm: dts: k3-am62a-ddr: Add ss_cfg reg entry   Santhosh Kumar K
• Please pull u-boot-samsung master   Minkyu Kang
• Please pull u-boot-samsung master   Minkyu Kang
• [PATCH v2 00/13] arm: exynos: Add E850-96 board   Minkyu Kang
• [PATCH 0/2] arm: dts: Add Itap Delay Value For High Speed DDR   Bhavya Kapoor
• [PATCH 1/2] arm: dts: k3-j7200-main: Add Itap Delay Value For DDR52 speed mode   Bhavya Kapoor
• [PATCH 2/2] arm: dts: k3-j721s2-main: Add Itap Delay Value For DDR50 speed mode   Bhavya Kapoor
• [PATCH 0/2] arm: dts: Add Itap Delay Value For High Speed DDR   Bhavya Kapoor
• [PATCH] rockchip: rk3568: add support of all UART   Jonas Karlman
• [PATCH v2] rockchip: rk35xx: expand space for decompressed kernel   Jonas Karlman
• [PATCH v2] rockchip: rk3328: Set efuse auto mode and timing control   Jonas Karlman
• [PATCH 0/2] rockchip: Fix ethernet on Radxa ROCK Pi E v1.21   Jonas Karlman
• [PATCH 1/2] net: designware: Reset eth phy before phy connect   Jonas Karlman
• [PATCH 2/2] rockchip: rk3328-rock-pi-e: Enable DM_ETH_PHY and PHY_REALTEK   Jonas Karlman
• [PATCH] usb: dwc3-of-simple: Remove Amlogic and Rockchip compatible   Jonas Karlman
• [PATCH] rockchip: sdram: fix LPDDR5 bank info for sys_reg version 3   Jonas Karlman
• [PATCH v2] rockchip: spl: Enable caches to speed up checksum validation   Jonas Karlman
• [PATCH v2] rockchip: spl: Enable caches to speed up checksum validation   Jonas Karlman
• [PATCH] board: rockchip: Add Hardkernel ODROID-M1S   Jonas Karlman
• [PATCH v3] rockchip: spl: Enable caches to speed up checksum validation   Jonas Karlman
• [PATCH 0/7] rockchip: rk35xx: Sync device tree with linux v6.8-rc1   Jonas Karlman
• [PATCH 1/7] rockchip: rk356x: Sync device tree from linux v6.7   Jonas Karlman
• [PATCH 2/7] rockchip: rk356x: Sync device tree from linux v6.8-rc1   Jonas Karlman
• [PATCH 3/7] rockchip: rk356x: Move common uart2 props to rk356x-u-boot.dtsi   Jonas Karlman
• [PATCH 4/7] rockchip: rk3588: Sync device tree with linux v6.7   Jonas Karlman
• [PATCH 5/7] rockchip: rk3588: Sync device tree from linux v6.8-rc1   Jonas Karlman
• [PATCH 6/7] rockchip: rk3588: Add default u-boot,spl-boot-order prop   Jonas Karlman
• [PATCH 7/7] rockchip: rk35xx: Remove unnecessary status props   Jonas Karlman
• [PATCH 0/3] rockchip: rk35xx: Fix writing to eMMC   Jonas Karlman
• [PATCH 1/3] rockchip: rk35xx: Remove use of eMMC DDR52 mode   Jonas Karlman
• [PATCH 2/3] rockchip: rk356x: Enable eMMC HS200 mode   Jonas Karlman
• [PATCH 3/3] rockchip: rk3588: Enable eMMC HS200 mode   Jonas Karlman
• [PATCH] rockchip: rk3588-quartzpro64: Enable AHCI, PCI and USB   Jonas Karlman
• [PATCH 1/3] rockchip: rk35xx: Remove use of eMMC DDR52 mode   Jonas Karlman
• [PATCH v2] mmc: Remove alignment hole for cmdidx in struct mmc_cmd   Jonas Karlman
• [PATCH v2] mmc: Add SPL_MMC_PWRSEQ to fix link issue when building SPL   Jonas Karlman
• [PATCH] rockchip: rk3568-generic: Enable eMMC HS200 mode   Jonas Karlman
• [PATCH] rockchip: board: Add minimal generic RK3588S/RK3588 board   Jonas Karlman
• [PATCH v3 4/8] dts: Add alternative location for upstream DTB builds   Mark Kettenis
• [PATCH 2/2] coreboot: Switch to a monospaced font   Mark Kettenis
• [PATCH 1/1] lib: support SMBIOS3 table in uuid_guid_get_str()   Mark Kettenis
• [PATCH v4 0/6] rpi5: initial support   Mark Kettenis
• Adding EFI runtime support to the Arm's FF-A bus   Abdellatif El Khlifi
• Adding EFI runtime support to the Arm's FF-A bus   Abdellatif El Khlifi
• [PATCH 1/3] firmware: psci: Fix bind_smccc_features psci check   Abdellatif El Khlifi
• [PATCH] board: rockchip: Add Hardkernel ODROID-M1S   Dongjin Kim
• [PATCH] board: rockchip: Add Hardkernel ODROID-M1S   Dongjin Kim
• [PATCH v2] net: sun8i-emac: Add support for fixed-link phy   Maksim Kiselev
• [PATCH v1] sunxi: R528: add UART1 support   Maksim Kiselev
• [PATCH v1] net: sun8i-emac: Add support for fixed-link phy   Maxim Kiselev
• [PATCH v1] net: sun8i-emac: Add support for fixed-link phy   Maxim Kiselev
• [PATCH v1] sunxi: R528: add UART1 support   Maxim Kiselev
• [PATCH 00/26] sync am65x device tree with Linux v6.7-rc1   Jan Kiszka
• [PATCH 00/26] sync am65x device tree with Linux v6.7-rc1   Jan Kiszka
• [PATCH v2 00/26] sync am65x device tree with Linux v6.7-rc1   Jan Kiszka
• [PATCH v2 00/26] sync am65x device tree with Linux v6.7-rc1   Jan Kiszka
• [PATCH] arm: dts: iot2050: Fix by syncing from Linux   Jan Kiszka
• [PATCH 3/6] board: ti: am62x: Add basic initialization for usb voltage, 32k crystal, debounce   Jan Kiszka
• [PATCH v2 2/2] efi_loader: support fmp versioning for multi bank update   Masahisa Kojima
• [PATCH v2 1/2] efi_loader: auto-generate boot option for each blkio device   Masahisa Kojima
• [PATCH v2 2/2] efi_loader: support fmp versioning for multi bank update   Masahisa Kojima
• [PATCH v2 2/2] efi_loader: support fmp versioning for multi bank update   Masahisa Kojima
• [PATCH v2 1/2] efi_loader: auto-generate boot option for each blkio device   Masahisa Kojima
• [PATCH v2 2/2] efi_loader: support fmp versioning for multi bank update   Masahisa Kojima
• [PATCH v3 0/2] fix FMP versioning for FWU multi bank update   Masahisa Kojima
• [PATCH v3 1/2] fwu: fix fwu_get_image_index interface   Masahisa Kojima
• [PATCH v3 2/2] efi_loader: support fmp versioning for multi bank update   Masahisa Kojima
• [PATCH v3 0/3] fix auto-generated boot options   Masahisa Kojima
• [PATCH v3 1/3] efi_loader: rename check_disk_has_default_file function   Masahisa Kojima
• [PATCH v3 2/3] efi_loader: auto-generate boot option for each blkio device   Masahisa Kojima
• [PATCH v3 3/3] efi_loader: auto-generate removable media boot option first   Masahisa Kojima
• [PATCH 2/3] efi_loader: avoid pointer access after calling efi_delete_handle   Masahisa Kojima
• [PATCH v2 0/3] fix and refactoring of efi_disk.c   Masahisa Kojima
• [PATCH v2 1/3] efi_loader: avoid pointer access after calling efi_delete_handle   Masahisa Kojima
• [PATCH v2 2/3] efi_loader: create common function to free struct efi_disk_obj   Masahisa Kojima
• [PATCH v2 3/3] efi_loader: return immediately in UCLASS_EFI_LOADER removal   Masahisa Kojima
• [PATCH v2 1/3] efi_loader: avoid pointer access after calling efi_delete_handle   Masahisa Kojima
• [PATCH v3 0/3] fix and refactoring of efi_disk.c   Masahisa Kojima
• [PATCH v3 1/3] efi_loader: avoid pointer access after calling efi_delete_handle   Masahisa Kojima
• [PATCH v3 2/3] efi_loader: create common function to free struct efi_disk_obj   Masahisa Kojima
• [PATCH v3 3/3] efi_loader: return immediately in UCLASS_EFI_LOADER removal   Masahisa Kojima
• New Defects reported by Coverity Scan for Das U-Boot   Masahisa Kojima
• [PATCH] efi_loader: check efi_get_variable_int return value   Masahisa Kojima
• [PATCH] efi_loader: migrate SMBIOS 3.0 entry point structure for measurement   Masahisa Kojima
• [PATCH] efi_loader: migrate SMBIOS 3.0 entry point structure for measurement   Masahisa Kojima
• [PATCH] efi_loader: migrate SMBIOS 3.0 entry point structure for measurement   Masahisa Kojima
• [PATCH] smbios: use struct_table_length to get SMBIOS 2.1 total table length   Masahisa Kojima
• [PATCH v2] efi_loader: migrate SMBIOS 3.0 entry point structure for measurement   Masahisa Kojima
• [PATCH] efi_loader: check efi_get_variable_int return value   Masahisa Kojima
• [PATCH] efi_loader: check efi_get_variable_int return value   Masahisa Kojima
• [PATCH v2] efi_loader: check efi_get_variable_int return value   Masahisa Kojima
• [PATCH 1/1] sunxi: sun4i: Reduce cpu clock at SPL initialization to 144 MHz   Ludwig Kormann
• [PATCH 1/1] sunxi: sun4i: Reduce cpu clock at SPL initialization to 144 MHz   Ludwig Kormann
• [PATCH v6 4/6] common: console: record console from the beginning   Mattijs Korpershoek
• [PATCH v1 10/12] fastboot: check device type for SPI NAND too   Mattijs Korpershoek
• [PATCH v1 11/12] fastboot: enable FASTBOOT_FLASH option for SPI NAND devices   Mattijs Korpershoek
• [PATCH v1 12/12] fastboot: fb_nand: add missing newlines in pr_err() macro   Mattijs Korpershoek
• [PATCH] doc: dfu: fix a handful of typos   Mattijs Korpershoek
• [PATCH v6 4/6] common: console: record console from the beginning   Mattijs Korpershoek
• [PATCH v6 0/6] Implement fastboot multiresponce   Mattijs Korpershoek
• [PATCH v6 4/6] common: console: record console from the beginning   Mattijs Korpershoek
• [PATCH v6 0/6] Implement fastboot multiresponce   Mattijs Korpershoek
• [PATCH v7 7/7] test: hush: dollar: fix bagous behavior   Mattijs Korpershoek
• [PATCH 1/2] include: env: ti: ti_common: Fix a missing semicolon   Mattijs Korpershoek
• [PATCH 2/2] include: env: ti: add default for do_main_cpsw0_qsgmii_phyinit   Mattijs Korpershoek
• [PATCH v7 7/7] test: hush: dollar: fix bagous behavior   Mattijs Korpershoek
• [PATCH] doc: fix three-dash references in reStructuredText   Mattijs Korpershoek
• [PATCH v7 0/7] Implement fastboot multiresponce   Mattijs Korpershoek
• [PATCH v1] fastboot: introduce 'oem board' subcommand   Mattijs Korpershoek
• [GIT PULL] Please pull u-boot-dfu-20240111   Mattijs Korpershoek
• [PATCH 0/2] MAINTAINERS: add Mattijs for Android AB / AVB   Mattijs Korpershoek
• [PATCH 1/2] MAINTAINERS: add Mattijs for Android AB   Mattijs Korpershoek
• [PATCH 2/2] MAINTAINERS: add Mattijs for Android AVB   Mattijs Korpershoek
• [PATCH v2] android_ab: don't ignore ab_control_store return code   Mattijs Korpershoek
• [PATCH v4 7/7] doc: board: Add document for DFU boot on am62x SoCs   Mattijs Korpershoek
• [PATCH 0/2] MAINTAINERS: add Mattijs for Android AB / AVB   Mattijs Korpershoek
• [PATCH 0/2] MAINTAINERS: add Mattijs for Android AB / AVB   Mattijs Korpershoek
• [PATCH v4 0/7] Add DFU and usb boot for TI am62x SK and beagleplay   Mattijs Korpershoek
• [PATCH v4 1/7] usb: dwc3: Add dwc3 glue driver for am62   Mattijs Korpershoek
• [PATCH v4 2/7] usb: dwc3: Switch to device mode on gadget start   Mattijs Korpershoek
• [PATCH v4 2/7] usb: dwc3: Switch to device mode on gadget start   Mattijs Korpershoek
• [PATCH v4 3/7] board: ti: am62x: am62x: include env for DFU   Mattijs Korpershoek
• [PATCH v4 7/7] doc: board: Add document for DFU boot on am62x SoCs   Mattijs Korpershoek
• [PATCH v4 4/7] arm: dts: k3-am625-sk: Enable usb port in u-boot   Mattijs Korpershoek
• [PATCH] arm64: xilinx: Move address/size-cells to proper locations   Krzysztof Kozlowski
• [PATCH] arm64: xilinx: Move address/size-cells to proper locations   Krzysztof Kozlowski
• [PATCH] arm64: xilinx: Move address/size-cells to proper locations   Krzysztof Kozlowski
• [PATCH] arm64: xilinx: Move address/size-cells to proper locations   Krzysztof Kozlowski
• [PATCH v2] mtd: rawnand: Meson NAND controller support   Arseniy Krasnov
• [PATCH v1] mtd: rawnand: macronix: OTP access for MX30LFxG18AC   Arseniy Krasnov
• [PATCH v2] cmd: mtd: OTP access support   Arseniy Krasnov
• [PATCH v2] mtd: rawnand: Meson NAND controller support   Arseniy Krasnov
• [PATCH v2] mtd: rawnand: Meson NAND controller support   Arseniy Krasnov
• [PATCH V3 6/6] nvmem: layouts: add U-Boot env layout   Greg Kroah-Hartman
• [PATCH v1 0/4] board: verdin-am62: set cpu core voltage depending on speed grade   Max Krummenacher
• [PATCH v1 1/4] board: verdin-am62: improve comment on usb phy core voltage   Max Krummenacher
• [PATCH v1 2/4] arm: mach-k3: am62: move device identification accessor functions to header   Max Krummenacher
• [PATCH v1 3/4] arm: mach-k3: am62: provide more soc feature info accessors   Max Krummenacher
• [PATCH v1 4/4] board: verdin-am62: set cpu core voltage depending on speed grade   Max Krummenacher
• [PATCH v1 4/4] board: verdin-am62: set cpu core voltage depending on speed grade   Max Krummenacher
• [PATCH v1 4/4] board: verdin-am62: set cpu core voltage depending on speed grade   Max Krummenacher
• [PATCH v2 2/2] tools: binman: ti_board_cfg: Check for linting problems   Max Krummenacher
• [PATCH v2 2/2] tools: binman: ti_board_cfg: Check for linting problems   Max Krummenacher
• [PATCH v3] test/py: mii: Add tests for mii command   Love Kumar
• [PATCH v3] test/py: i2c: Add tests for i2c command   Love Kumar
• [PATCH] test/py: memtest: Add tests for mtest command   Love Kumar
• [PATCH] test/py: net_boot: Add test cases for net boot   Love Kumar
• [PATCH] test/py: bootstage: Add test for bootstage command   Love Kumar
• [PATCH] test/py: reset: Add a test for reset command   Love Kumar
• [PATCH] test/py: saveenv: Add a test for saveenv command   Love Kumar
• [PATCH v2] test/py: net_boot: Add test cases for net boot   Love Kumar
• [PATCH] test/py: zynqmp_rpu: Add test for loading RPU apps   Love Kumar
• [PATCH] test/py: gpio: Add gpio pins generic test   Love Kumar
• [PATCH] test/py: secure: Add secure tests for Zynq & ZynqMP   Love Kumar
• [PATCH] test/py: mmc: Add tests for MMC device   Love Kumar
• [PATCH] test/py: usb: Add tests for USB device   Love Kumar
• [PATCH] test/py: nand: Add tests for NAND flash device   Love Kumar
• [PATCH] test/py: spi: Add tests for SPI flash device   Love Kumar
• [PATCH] test/py: scsi: Add test for scsi commands   Love Kumar
• [PATCH v5] test/py: net: Add dhcp abort test   Love Kumar
• [PATCH] arm: mach-k3: j721s2_init: Support less than max DDR controllers   Kumar, Udit
• TPM setup on a RPI Compute Module 4   Jonas Kvinge
• [PATCH v3 1/3] riscv: dts: sophgo: add basic device tree for Milk-V Duo board   Yixun Lan
• [PATCH v4 3/3] doc: sophgo: milkv_duo: document Milk-V Duo board   Yixun Lan
• [PATCH v13 00/24] Modernize U-Boot shell   Francis Laniel
• [PATCH v13 00/24] Modernize U-Boot shell   Francis Laniel
• [PATCH v13 00/24] Modernize U-Boot shell   Francis Laniel
• [PATCH v1 1/1] drivers: misc: Add socfpga_dtreg driver for Intel SoCFPGA   Lau, Wan Yee
• [PATCH v4 0/6] board: siemens: clean up subfolders   Enrico Leto
• [PATCH v4 1/6] siemens: eeprom: clean up definitions   Enrico Leto
• [PATCH v4 2/6] siemens: eeprom: simplify setup & read   Enrico Leto
• [PATCH v4 3/6] siemens draco: i2c: use driver model for u-boot   Enrico Leto
• [PATCH v4 4/6] siemens: board: clean up draco products vs common   Enrico Leto
• [PATCH v4 5/6] siemens: board: clean up includes   Enrico Leto
• [PATCH v4 6/6] siemens: factoryset: use correct config for soc specific implementation   Enrico Leto
• [PATCH v4 0/6] board: siemens: clean up subfolders   Leto, Enrico
• [PATCH v4 0/6] board: siemens: clean up subfolders   Leto, Enrico
• [PATCH v4 0/6] board: siemens: clean up subfolders   Enrico Leto
• [PATCH v4 1/6] siemens: eeprom: clean up definitions   Enrico Leto
• [PATCH v5 0/7] board: siemens: clean up subfolders   Enrico Leto
• [PATCH v5 1/7] siemens: eeprom: clean up definitions   Enrico Leto
• [PATCH v5 2/7] siemens: eeprom: simplify setup & read   Enrico Leto
• [PATCH v5 3/7] siemens draco: i2c: use driver model for u-boot   Enrico Leto
• [PATCH v5 4/7] siemens: board: etamin: remove deprecated nand config   Enrico Leto
• [PATCH v5 5/7] siemens: board: clean up draco products vs common   Enrico Leto
• [PATCH v5 6/7] siemens: board: clean up includes   Enrico Leto
• [PATCH v5 7/7] siemens: factoryset: use correct config for soc specific implementation   Enrico Leto
• [PATCH v6 0/7] board: siemens: clean up subfolders   Enrico Leto
• [PATCH v6 1/7] siemens: eeprom: clean up definitions   Enrico Leto
• [PATCH v6 2/7] siemens: eeprom: simplify setup & read   Enrico Leto
• [PATCH v6 3/7] siemens draco: i2c: use driver model for u-boot   Enrico Leto
• [PATCH v6 4/7] siemens: board: etamin: remove deprecated nand config   Enrico Leto
• [PATCH v6 5/7] siemens: board: clean up products folders vs common   Enrico Leto
• [PATCH v6 6/7] siemens: board: clean up includes   Enrico Leto
• [PATCH v6 7/7] siemens: factoryset: use correct config for soc specific implementation   Enrico Leto
• FIELD_RETURN on i.MX8MNANOLPD4 EVK   Ye Li
• [EXT] AW: FIELD_RETURN on i.MX8MNANOLPD4 EVK   Ye Li
• [PATCH] arm: imx: imx8m: Enable the SError exception   Ye Li
• [PATCH V4 1/3] doc: falcon: riscv: Falcon Mode boot on RISC-V   Leo Liang
• [PATCH V4 2/3] spl: riscv: falcon: move fdt blob to specified address   Leo Liang
• [PATCH V4 3/3] configs: andes: add the fdt blob copy address for SPL   Leo Liang
• [PATCH] board: starfive: handle compatible property in dynamic DT configuration   Leo Liang
• [PATCH] riscv: qemu: enable booting on a second virtio device   Leo Liang
• [PATCH] board: sifive: spl: Initialized the PWM setting in the SPL stage   Leo Liang
• [PATCH 1/1] cmd: sbi: add support for Debug Trigger Extension   Leo Liang
• [PATCH] configs: visionfive2: Disable ENV_IS_NOWHERE   Leo Liang
• [PATCH v4 1/3] riscv: dts: sophgo: add basic device tree for Milk-V Duo board   Leo Liang
• [PATCH v4 2/3] riscv: sophgo: milkv_duo: initial support added   Leo Liang
• [PATCH v4 3/3] doc: sophgo: milkv_duo: document Milk-V Duo board   Leo Liang
• [PATCH 1/2] net: phy: motorcomm: configure pad drive strength register   Leo Liang
• [PATCH 2/2] board: visionfive2: configure PHY pad drive strength   Leo Liang
• [PATCH v2 1/2] riscv: dts: jh7110: add power management unit controller node   Leo Liang
• [PATCH v2 2/2] riscv: dts: starfive: add regulator device   Leo Liang
• [GIT PULL] u-boot-riscv/master   Leo Liang
• [PATCH V4 2/2] configs: andes: add watchdog support fot andes ae350   Randolph Lin
• [PATCH v2] reset: npcm: Add support for Nuvoton NPCM BMC family   Jim Liu
• [PATCH v1] arm: dts: nuvoton: modify npcm8xx reset property   Jim Liu
• [PATCH 0/4] riscv: sophgo: milkv_duo: add support for Milk-V Duo board   Kongyang Liu
• [PATCH 1/4] riscv: sophgo: milkv_duo: initial support added   Kongyang Liu
• [PATCH 2/4] riscv: dts: sophgo: Add basic device tree for Milk-V Duo board   Kongyang Liu
• [PATCH 3/4] configs: milkv_duo_defconfig: Add initial config   Kongyang Liu
• [PATCH 4/4] doc: sophgo: milkv_duo: document Milk-V Duo board   Kongyang Liu
• [PATCH v2 0/3] riscv: sophgo: milkv_duo: add support for Milk-V Duo board   Kongyang Liu
• [PATCH v2 1/3] riscv: sophgo: milkv_duo: initial support added   Kongyang Liu
• [PATCH v2 2/3] riscv: dts: sophgo: Add basic device tree for Milk-V Duo board   Kongyang Liu
• [PATCH v2 3/3] doc: sophgo: milkv_duo: document Milk-V Duo board   Kongyang Liu
• [PATCH v2 1/3] riscv: sophgo: milkv_duo: initial support added   Kongyang Liu
• [PATCH v2 3/3] doc: sophgo: milkv_duo: document Milk-V Duo board   Kongyang Liu
• [PATCH v3 0/3] riscv: sophgo: milkv_duo: add support for Milk-V Duo board   Kongyang Liu
• [PATCH v3 1/3] riscv: dts: sophgo: add basic device tree for Milk-V Duo board   Kongyang Liu
• [PATCH v3 2/3] riscv: sophgo: milkv_duo: initial support added   Kongyang Liu
• [PATCH v3 3/3] doc: sophgo: milkv_duo: document Milk-V Duo board   Kongyang Liu
• [PATCH v4 0/3] riscv: sophgo: milkv_duo: add support for Milk-V Duo board   Kongyang Liu
• [PATCH v4 1/3] riscv: dts: sophgo: add basic device tree for Milk-V Duo board   Kongyang Liu
• [PATCH v4 2/3] riscv: sophgo: milkv_duo: initial support added   Kongyang Liu
• [PATCH v4 3/3] doc: sophgo: milkv_duo: document Milk-V Duo board   Kongyang Liu
• [PATCH v4 3/3] doc: sophgo: milkv_duo: document Milk-V Duo board   Kongyang Liu
• inconsistent wget behavior   Paul Liu
• [PATCH 0/1] get_maintainer.pl: slightly modify penguin_chief   Anthony Loiseau
• [PATCH 1/1] get_maintainer.pl: slightly modify penguin_chief   Anthony Loiseau
• [PATCH] fsl-layerscape/soc.c: do not destroy bootcmd environment   Mike Looijmans
• [PATCH 0/5] rockchip: Add support for rv1126 based Sonoff iHost Gateway   Tim Lunn
• [PATCH 1/5] arm: dts: rockchip: Sync rv1126 dts from linux 6.8-rc1   Tim Lunn
• [PATCH 2/5] ram: rockchip: Add rv1126 ddr4 support   Tim Lunn
• [PATCH 3/5] board: rockchip: Add Sonoff iHost board   Tim Lunn
• [PATCH 4/5] rockchip: rv1126: select SPL_OPTEE_IMAGE   Tim Lunn
• [PATCH 5/5] rockchip: rv1126: Move RAM disk address   Tim Lunn
• [PATCH 3/5] board: rockchip: Add Sonoff iHost board   Tim Lunn
• [PATCH v2 0/6] rockchip: Add support for rv1126 based Sonoff iHost Gateway   Tim Lunn
• [PATCH v2 1/6] arm: dts: rockchip: Sync rv1126 dts from linux 6.8-rc1   Tim Lunn
• [PATCH v2 2/6] ram: rockchip: Add rv1126 ddr4 support   Tim Lunn
• [PATCH v2 3/6] rockchip: Convert rv1126 to standard boot   Tim Lunn
• [PATCH v2 4/6] board: rockchip: Add Sonoff iHost board   Tim Lunn
• [PATCH v2 5/6] rockchip: rv1126: select SPL_OPTEE_IMAGE   Tim Lunn
• [PATCH v2 6/6] rockchip: rv1126: Move RAM disk address   Tim Lunn
• [PATCH 1/4] tools: zynqmpimage: show info on partition 0   Brandon Maier
• [PATCH 2/4] tools: zynqmpimage: print all partition sizes   Brandon Maier
• [PATCH 3/4] tools: zynqmpimage: add partition extracting   Brandon Maier
• [PATCH 4/4] tools: zynqmpimage: print partition names   Brandon Maier
• [PATCH] scripts/gen_compile_commands: update to Linux v6.7   Brandon Maier
• [PATCH v1 1/3] arm: config: xea: Update environment variables for XEA board (imx287)   Lukasz Majewski
• [PATCH v1 2/3] arm: config: Enable CRC8 support in SPL on imx287 XEA board   Lukasz Majewski
• [PATCH v1 3/3] arm: xea: Add support for boot image source descriptor in SPL   Lukasz Majewski
• [PATCH v1 1/3] arm: config: xea: Update environment variables for XEA board (imx287)   Lukasz Majewski
• [PATCH v2 1/3] arm: xea: Move XEA's environment variables from xea.h to xea.env   Lukasz Majewski
• [PATCH v2 2/3] arm: config: Enable CRC8 support in SPL on imx287 XEA board   Lukasz Majewski
• [PATCH v2 3/3] arm: xea: Add support for boot image source descriptor in SPL   Lukasz Majewski
• [PATCH v2 1/3] arm: xea: Move XEA's environment variables from xea.h to xea.env   Lukasz Majewski
• [PATCH v2 1/3] arm: xea: Move XEA's environment variables from xea.h to xea.env   Lukasz Majewski
• [PATCH v2 1/3] arm: xea: Move XEA's environment variables from xea.h to xea.env   Lukasz Majewski
• [PATCH] defconfig: xea: Change default spi-nor memory bus to 2 (single binary)   Lukasz Majewski
• [PATCH v3 1/3] arm: xea: Move XEA's environment variables from xea.h to xea.env   Lukasz Majewski
• [PATCH v3 2/3] arm: config: Enable CRC8 support in SPL on imx287 XEA board   Lukasz Majewski
• [PATCH v3 3/3] arm: xea: Add support for boot image source descriptor in SPL   Lukasz Majewski
• [PATCH v4 0/9] Handoff bloblist from previous boot stage   Raymond Mao
• [PATCH v4 1/9] bloblist: add API to check the register conventions   Raymond Mao
• [PATCH v4 2/9] bloblist: check bloblist with specified buffer size   Raymond Mao
• [PATCH v4 3/9] bloblist: refactor of bloblist_reloc()   Raymond Mao
• [PATCH v4 4/9] arm: armv7: save boot arguments   Raymond Mao
• [PATCH v4 5/9] arm: armv8: save boot arguments   Raymond Mao
• [PATCH v4 6/9] arm: Get bloblist from boot arguments   Raymond Mao
• [PATCH v4 7/9] bloblist: Load the bloblist from the previous loader   Raymond Mao
• [PATCH v4 8/9] fdt: update the document and Kconfig description   Raymond Mao
• [PATCH v4 9/9] fdt: get FDT from bloblist   Raymond Mao
• [PATCH v4 6/9] arm: Get bloblist from boot arguments   Raymond Mao
• [PATCH v4 4/9] arm: armv7: save boot arguments   Raymond Mao
• [PATCH v4 8/9] fdt: update the document and Kconfig description   Raymond Mao
• [PATCH v5 0/8] Handoff bloblist from previous boot stage   Raymond Mao
• [PATCH v5 1/8] bloblist: add API to check the register conventions   Raymond Mao
• [PATCH v5 2/8] bloblist: check bloblist with specified buffer size   Raymond Mao
• [PATCH v5 3/8] bloblist: refactor of bloblist_reloc()   Raymond Mao
• [PATCH v5 4/8] arm: armv7: save boot arguments   Raymond Mao
• [PATCH v5 5/8] arm: armv8: save boot arguments   Raymond Mao
• [PATCH v5 6/8] arm: Get bloblist from boot arguments   Raymond Mao
• [PATCH v5 7/8] bloblist: Load the bloblist from the previous loader   Raymond Mao
• [PATCH v5 8/8] fdt: get FDT from bloblist   Raymond Mao
• [PATCH v5 8/8] fdt: get FDT from bloblist   Raymond Mao
• [PATCH v5 8/8] fdt: get FDT from bloblist   Raymond Mao
• [PATCH v6 0/7] Handoff bloblist from previous boot stage   Raymond Mao
• [PATCH v6 1/7] bloblist: add API to check the register conventions   Raymond Mao
• [PATCH v6 2/7] bloblist: check bloblist with specified buffer size   Raymond Mao
• [PATCH v6 3/7] bloblist: refactor of bloblist_reloc()   Raymond Mao
• [PATCH v6 4/7] arm: armv7: save boot arguments   Raymond Mao
• [PATCH v6 5/7] arm: armv8: save boot arguments   Raymond Mao
• [PATCH v6 6/7] arm: Get bloblist from boot arguments   Raymond Mao
• [PATCH v6 7/7] bloblist: Load the bloblist from the previous loader   Raymond Mao
• [PATCH v7 0/7] Handoff bloblist from previous boot stage   Raymond Mao
• [PATCH v7 1/8] bloblist: add API to check the register conventions   Raymond Mao
• [PATCH v7 2/8] bloblist: check bloblist with specified buffer size   Raymond Mao
• [PATCH v7 3/8] bloblist: refactor of bloblist_reloc()   Raymond Mao
• [PATCH v7 4/8] arm: armv7: save boot arguments   Raymond Mao
• [PATCH v7 5/8] arm: armv8: save boot arguments   Raymond Mao
• [PATCH v7 6/8] arm: Get bloblist from boot arguments   Raymond Mao
• [PATCH v7 7/8] bloblist: Load the bloblist from the previous loader   Raymond Mao
• [PATCH v7 8/8] dts: OF_HAS_PRIOR_STAGE should depend on !BLOBLIST   Raymond Mao
• [PATCH v7 RESEND 0/8] Handoff bloblist from previous boot stage   Raymond Mao
• [PATCH v7 5/8] arm: armv8: save boot arguments   Raymond Mao
• [PATCH v3 1/3] arm: mvebu: Espressobin: move FDT fixup into a separate function   Robert Marko
• [PATCH v3 1/3] arm: mvebu: Espressobin: move FDT fixup into a separate function   Robert Marko
• [PATCH v4 0/6] rpi5: initial support   Jens Maus
• [PATCH v4 0/6] rpi5: initial support   Jens Maus
• [PATCH v4 0/6] rpi5: initial support   Jens Maus
• [PATCH v4 0/6] rpi5: initial support   Jens Maus
• [PATCH v4 0/6] rpi5: initial support   Jens Maus
• [PATCH v4 0/6] rpi5: initial support   Jens Maus
• [PATCH v4 0/6] rpi5: initial support   Jens Maus
• [PATCH v4 0/6] rpi5: initial support   Jens Maus
• [PATCH v4 0/6] rpi5: initial support   Jens Maus
• [PATCH v4 0/6] rpi5: initial support   Jens Maus
• [PATCH v4 0/6] rpi5: initial support   Jens Maus
• [PATCH v4 0/6] rpi5: initial support   Jens Maus
• [PATCH v4 0/6] rpi5: initial support   Jens Maus
• [PATCH v4 0/6] rpi5: initial support   Jens Maus
• [PATCH v5 0/7] rpi5: initial support   Jens Maus
• [PATCH 0/2] board: solidrun: clearfog gtr: add serdes configuration   Josua Mayer
• [PATCH 1/2] arm: mvebu: clearfog gtr: add config option to select serdes0 interface   Josua Mayer
• [PATCH 2/2] board: solidrun: clearfog: fix serdes 1 / eth2 speed for clearfog gtr   Josua Mayer
• [PATCH 1/2] arm: mvebu: clearfog gtr: add config option to select serdes0 interface   Josua Mayer
• [PATCH v2 0/2] board: solidrun: clearfog gtr: add serdes configuration   Josua Mayer
• [PATCH v2 1/2] arm: mvebu: clearfog gtr: add config option to select serdes0 interface   Josua Mayer
• [PATCH v2 2/2] board: solidrun: clearfog: fix serdes 1 / eth2 speed for clearfog gtr   Josua Mayer
• [PATCH 0/3] arm: mvebu: helios-4: add defconfig forspi booting et al   Josua Mayer
• [PATCH 1/3] arm: dts: armada-38x-solidrun-microsom: configure i2c0 bus   Josua Mayer
• [PATCH 2/3] arm: mvebu: helios4_defconfig: enable setexpr command   Josua Mayer
• [PATCH 3/3] arm: mvebu: helios-4: add defconfig for spi booting   Josua Mayer
• [PATCH 3/3] arm: mvebu: helios-4: add defconfig for spi booting   Josua Mayer
• [PATCH 00/34] x86: expo: Add support for editing coreboot CMOS RAM settings   Bin Meng
• [PATCH] tools: docker: Drop the git user name and email configuration   Bin Meng
• [PATCH v2 00/19] x86: expo: Add support for editing coreboot CMOS RAM settings   Bin Meng
• [PATCH] doc: coreboot: Update stale graphics enabling instructions   Bin Meng
• [PATCH v2 00/19] x86: expo: Add support for editing coreboot CMOS RAM settings   Bin Meng
• [PATCH v2 00/19] x86: expo: Add support for editing coreboot CMOS RAM settings   Bin Meng
• [PATCH 2/2] coreboot: Switch to a monospaced font   Bin Meng
• [PATCH] common: console: Fix print complete stdio device list   Bin Meng
• [PATCH v2] common: console: Fix print complete stdio device list   Bin Meng
• [PATCH v2 01/26] configs: am65x_evm_r5: enable driver for fixed regulators   Nishanth Menon
• [PATCH v2 02/26] configs: am65x_evm_a53: disable CONSOLE_MUX   Nishanth Menon
• [PATCH v2 03/26] arm: dts: k3-am654-r5: Merge board file and U-Boot overlay   Nishanth Menon
• [PATCH v2 04/26] arm: dts: k3-am654: pull in dtb update from Linux   Nishanth Menon
• [PATCH v2 05/26] arm: dts: k3-am654: copy bootph properties to a53 dts   Nishanth Menon
• [PATCH v2 06/26] arm: dts: k3-am654: include a53 board dtb for r5 build   Nishanth Menon
• [PATCH v2 07/26] arm: dts: k3-am654: remove duplicate vtt_supply   Nishanth Menon
• [PATCH v2 08/26] arm: dts: k3-am654: remove duplicate wkup_uart0   Nishanth Menon
• [PATCH v2 09/26] arm: dts: k3-am654: remove duplicate timer   Nishanth Menon
• [PATCH v2 10/26] arm: dts: k3-am654: remove duplicate mcu_ringacc   Nishanth Menon
• [PATCH v2 11/26] arm: dts: k3-am654: remove duplicate mcu_udmap   Nishanth Menon
• [PATCH v2 12/26] arm: dts: k3-am654: add needed regs to udmap nodes   Nishanth Menon
• [PATCH v2 13/26] arm: dts: k3-am654: remove duplicate mcu_uart0 node   Nishanth Menon
• [PATCH v2 14/26] arm: dts: k3-am654: remove duplicate main_uart0   Nishanth Menon
• [PATCH v2 15/26] arm: dts: k3-am654: remove duplicate sdhci0 pinmux node   Nishanth Menon
• [PATCH v2 16/26] arm: dts: k3-am654: remove duplicate sdhci1 pinmux node   Nishanth Menon
• [PATCH v2 17/26] arm: dts: k3-am654: remove duplicate wkup_i2c0   Nishanth Menon
• [PATCH v2 18/26] arm: dts: k3-am654: remove duplicate ospi0 node   Nishanth Menon
• [PATCH v2 19/26] arm: dts: k3-am654: remove usb0   Nishanth Menon
• [PATCH v2 20/26] arm: dts: k3-am654: remove duplicate mdio   Nishanth Menon
• [PATCH v2 21/26] arm: dts: k3-am654: remove duplicate vtt pinmux   Nishanth Menon
• [PATCH v2 22/26] arm: dts: k3-am654: remove duplicate root properties   Nishanth Menon
• [PATCH v2 23/26] arm: dts: k3-am654: remove un-needed aliases   Nishanth Menon
• [PATCH v2 24/26] arm: dts: k3-am654: move dummy_clock to root node   Nishanth Menon
• [PATCH v2 25/26] arm: dts: k3-am654: remove duplicate mcu secure proxy node   Nishanth Menon
• [PATCH v2 26/26] arm: dts: k3-am654: convert bootph-pre-ram to bootph-all   Nishanth Menon
• [PATCH v7 00/17] Introduce initial TI's J784S4 and AM69 support   Nishanth Menon
• [PATCH v7 00/17] Introduce initial TI's J784S4 and AM69 support   Nishanth Menon
• [PATCH v7 01/17] arm: dts: Introduce j784s4 dts from linux kernel   Nishanth Menon
• [PATCH v7 02/17] arm: dts: Introduce am69-sk dts from linux kernel   Nishanth Menon
• [PATCH v7 03/17] arm: mach-k3: Add basic support for J784S4 SoC definition   Nishanth Menon
• [PATCH v7 05/17] soc: ti: k3-socinfo: Add entry for J784S4 SoC   Nishanth Menon
• [PATCH v7 06/17] arm: mach-k3: j784s4: Add clk and power support   Nishanth Menon
• [PATCH v7 07/17] drivers: dma: Add support for J784S4 SoC   Nishanth Menon
• [PATCH v7 08/17] board: ti: j784s4: Add board support for J784S4 EVM   Nishanth Menon
• [PATCH v7 09/17] board: ti: j748s4: Add board config yaml files   Nishanth Menon
• [PATCH v7 10/17] board: ti: j784s4: Add boot environment variables   Nishanth Menon
• [PATCH v7 11/17] arm: dts: Introduce j784s4 u-boot dts files   Nishanth Menon
• [PATCH v7 12/17] arm: dts: Introduce am69-sk u-boot dts files   Nishanth Menon
• [PATCH v7 13/17] arm: dts: Add bootph-all for memory node   Nishanth Menon
• [PATCH v7 14/17] configs: j784s4_evm: Add defconfig for j784s4 evm board   Nishanth Menon
• [PATCH v7 15/17] configs: Add am69_sk_* defconfig fragments   Nishanth Menon
• [PATCH v7 16/17] doc: board: ti: k3: Add J784S4 EVM and AM69 SK documentation   Nishanth Menon
• [PATCH v7 17/17] board: ti: j784s4: Add MAINTAINERS file   Nishanth Menon
• [PATCH 2/2] tools: binman: ti_board_cfg: Check for linting problems   Nishanth Menon
• [PATCH 00/10] board/ti: k3 boards: Stop using findfdt   Nishanth Menon
• [PATCH 01/10] board: ti: common: Introduce a common fdt ops library   Nishanth Menon
• [PATCH 02/10] board: ti: am62ax: Set fdtfile from C code instead of findfdt script   Nishanth Menon
• [PATCH 03/10] board: ti: am62x: Set fdtfile from C code instead of findfdt script   Nishanth Menon
• [PATCH 04/10] board: ti: am64x: Set fdtfile from C code instead of findfdt script   Nishanth Menon
• [PATCH 05/10] board: ti: am65x: Set fdtfile from C code instead of findfdt script   Nishanth Menon
• [PATCH 06/10] board: ti: j721e: Set fdtfile from C code instead of findfdt script   Nishanth Menon
• [PATCH 07/10] board: ti: j721s2: Set fdtfile from C code instead of findfdt script   Nishanth Menon
• [PATCH 08/10] board: beagle: beagleboneai64: Set fdtfile from C code instead of findfdt script   Nishanth Menon
• [PATCH 09/10] board: beagle: beagleplay: Set fdtfile from C code instead of findfdt script   Nishanth Menon
• [PATCH 10/10] include: env: ti: Drop default_findfdt   Nishanth Menon
• [PATCH 01/10] board: ti: common: Introduce a common fdt ops library   Nishanth Menon
• [PATCH 08/10] board: beagle: beagleboneai64: Set fdtfile from C code instead of findfdt script   Nishanth Menon
• [PATCH 01/10] board: ti: common: Introduce a common fdt ops library   Nishanth Menon
• [PATCH 08/10] board: beagle: beagleboneai64: Set fdtfile from C code instead of findfdt script   Nishanth Menon
• [PATCH 02/10] board: ti: am62ax: Set fdtfile from C code instead of findfdt script   Nishanth Menon
• [PATCH] arch: mach-k3: Fix incorrect mapping of higher DDR addresses as device memory   Nishanth Menon
• [PATCH 04/10] board: ti: am64x: Set fdtfile from C code instead of findfdt script   Nishanth Menon
• [PATCH 01/10] board: ti: common: Introduce a common fdt ops library   Nishanth Menon
• [PATCH v3 0/8] Suspend to RAM support for K3 J7200   Nishanth Menon
• [PATCH 06/10] board: ti: j721e: Set fdtfile from C code instead of findfdt script   Nishanth Menon
• [PATCH V2 00/10] board/ti: k3 boards: Stop using findfdt   Nishanth Menon
• [PATCH V2 01/10] board: ti: common: Introduce a common fdt ops library   Nishanth Menon
• [PATCH V2 02/10] board: ti: am62ax: Set fdtfile from C code instead of findfdt script   Nishanth Menon
• [PATCH V2 03/10] board: ti: am62x: Set fdtfile from C code instead of findfdt script   Nishanth Menon
• [PATCH V2 04/10] board: ti: am64x: Set fdtfile from C code instead of findfdt script   Nishanth Menon
• [PATCH V2 05/10] board: ti: am65x: Set fdtfile from C code instead of findfdt script   Nishanth Menon
• [PATCH V2 06/10] board: ti: j721e: Set fdtfile from C code instead of findfdt script   Nishanth Menon
• [PATCH V2 07/10] board: ti: j721s2: Set fdtfile from C code instead of findfdt script   Nishanth Menon
• [PATCH V2 08/10] board: beagle: beagleboneai64: Set fdtfile from C code instead of findfdt script   Nishanth Menon
• [PATCH V2 09/10] board: beagle: beagleplay: Set fdtfile from C code instead of findfdt script   Nishanth Menon
• [PATCH V2 10/10] include: env: ti: Drop default_findfdt   Nishanth Menon
• [PATCH 4/4] configs: am64x_evm_a53_defconfig: Enable NAND   Nishanth Menon
• [PATCH 0/4] arm: mach-k3: am64: Add NAND configuration   Nishanth Menon
• [PATCH 4/4] configs: am64x_evm_a53_defconfig: Enable NAND   Nishanth Menon
• [PATCH] board: ti: am64: Support TMDS64EVM   Nishanth Menon
• [PATCH 4/4] configs: am64x_evm_a53_defconfig: Enable NAND   Nishanth Menon
• [PATCH 4/4] configs: am64x_evm_a53_defconfig: Enable NAND   Nishanth Menon
• [PATCH V2 10/10] include: env: ti: Drop default_findfdt   Nishanth Menon
• [PATCH v7 15/17] configs: Add am69_sk_* defconfig fragments   Nishanth Menon
• [PATCH v7 15/17] configs: Add am69_sk_* defconfig fragments   Nishanth Menon
• [PATCH 01/10] board: ti: am62x: Init DRAM size in R5/A53 SPL   Nishanth Menon
• [PATCH 06/10] arm: mach-k3: am62: Update SoC autogenerated data to enable Ethernet Boot   Nishanth Menon
• [PATCH 07/10] arm: mach-k3: am625_init: Probe AM65 CPSW NUSS   Nishanth Menon
• [PATCH 08/10] configs: am62: Add configs for enabling ETHBOOT in R5SPL   Nishanth Menon
• [PATCH 00/10] Add support for Ethernet Boot on SK-AM62   Nishanth Menon
• [PATCH 09/10] configs: am62x_evm_a53_defconfig: Enable configs required for Ethboot   Nishanth Menon
• [PATCH v4 6/7] beagleplay: Add DFU support   Nishanth Menon
• [PATCH v4 7/7] doc: board: Add document for DFU boot on am62x SoCs   Nishanth Menon
• [PATCH v4 5/7] configs: am62x_evm_*: Enable USB and DFU support   Nishanth Menon
• [PATCH 01/10] board: ti: am62x: Init DRAM size in R5/A53 SPL   Nishanth Menon
• [PATCH 00/10] Add support for Ethernet Boot on SK-AM62   Nishanth Menon
• [PATCH 00/10] Add support for Ethernet Boot on SK-AM62   Nishanth Menon
• [PATCH 4/5] arm: dts: k3-j721e-beagleboneai64: Fix USB operation   Nishanth Menon
• [PATCH 4/5] arm: dts: k3-j721e-beagleboneai64: Fix USB operation   Nishanth Menon
• [PATCH v4 5/7] configs: am62x_evm_*: Enable USB and DFU support   Nishanth Menon
• [PATCH v4 5/7] configs: am62x_evm_*: Enable USB and DFU support   Nishanth Menon
• [PATCH 0/2] arm: dts: Add Itap Delay Value For High Speed DDR   Nishanth Menon
• [PATCH v4 00/11] An effort to bring DT bindings compliance within U-Boot   Nishanth Menon
• [PATCH v8 12/16] arm: dts: Introduce j784s4 u-boot dts files   Nishanth Menon
• [PATCH v8 04/16] arm: dts: Add bootph-all for memory node   Nishanth Menon
• [PATCH v8 02/16] arm: mach-k3: Add basic support for J784S4 SoC definition   Nishanth Menon
• [PATCH v8 09/16] board: ti: j784s4: Add board support for J784S4 EVM   Nishanth Menon
• [PATCH v8 02/16] arm: mach-k3: Add basic support for J784S4 SoC definition   Nishanth Menon
• [PATCH v8 12/16] arm: dts: Introduce j784s4 u-boot dts files   Nishanth Menon
• [PATCH 07/10] arm: mach-k3: am625_init: Probe AM65 CPSW NUSS   Nishanth Menon
• [PATCH] firmware: ti_sci: fix the secure_hdr in do_xfer   Nishanth Menon
• [PATCH] firmware: ti_sci: fix the secure_hdr in do_xfer   Nishanth Menon
• [PATCH V3] firmware: ti_sci: fix the secure_hdr in do_xfer   Nishanth Menon
• [RFC PATCH v3 02/15] misc: fs-loader: Use fw_storage_interface instead of storage_interface   Nishanth Menon
• [PATCH 1/2] env: ti: mmc: add save_uenv command   Nishanth Menon
• [PATCH] firmware: ti_sci: fix the secure_hdr in do_xfer   Nishanth Menon
• [PATCH v8 02/16] arm: mach-k3: Add basic support for J784S4 SoC definition   Nishanth Menon
• [PATCH V3] firmware: ti_sci: fix the secure_hdr in do_xfer   Nishanth Menon
• [PATCH V4 1/2] firmware: ti_sci: fix the secure_hdr in do_xfer   Nishanth Menon
• [PATCH V4 2/2] firmware: ti_sci: Add comment explaining the is_secure code   Nishanth Menon
• [PATCH V3 00/11] board/ti: k3 boards: Stop using findfdt   Nishanth Menon
• [PATCH V3 01/11] board: ti: Add missing common/Kconfig references   Nishanth Menon
• [PATCH V3 02/11] board: ti: common: Introduce a common fdt ops library   Nishanth Menon
• [PATCH V3 03/11] board: ti: am62ax: Set fdtfile from C code instead of findfdt script   Nishanth Menon
• [PATCH V3 04/11] board: ti: am62x: Set fdtfile from C code instead of findfdt script   Nishanth Menon
• [PATCH V3 05/11] board: ti: am64x: Set fdtfile from C code instead of findfdt script   Nishanth Menon
• [PATCH V3 06/11] board: ti: am65x: Set fdtfile from C code instead of findfdt script   Nishanth Menon
• [PATCH V3 07/11] board: ti: j721e: Set fdtfile from C code instead of findfdt script   Nishanth Menon
• [PATCH V3 08/11] board: ti: j721s2: Set fdtfile from C code instead of findfdt script   Nishanth Menon
• [PATCH V3 09/11] board: beagle: beagleboneai64: Set fdtfile from C code instead of findfdt script   Nishanth Menon
• [PATCH V3 10/11] board: beagle: beagleplay: Set fdtfile from C code instead of findfdt script   Nishanth Menon
• [PATCH V3 11/11] include: env: ti: Drop default_findfdt   Nishanth Menon
• [PATCH] rockchip: rk3568: add support of all UART   Arseniy Mescheryakov
• [PATCH] rockchip: rk3568: add support of all UART   Arseniy Mescheryakov
• [PATCH] pinctrl: aspeed: add pass-through pins and siopbi/siopbo   Ivan Mikhaylov
• [PATCH V3 1/6] dt-bindings: nvmem: layouts: add U-Boot environment variables layout   Rafał Miłecki
• [PATCH 0/2] This series adds support for the phyGATE-Tauri-L.   Yannic Moog
• [PATCH 1/2] Add support for phyGATE-Tauri-L-iMX8MM   Yannic Moog
• [PATCH 2/2] doc: board: phytec: Add phyGATE-Tauri board documentation   Yannic Moog
• [PATCH v2 0/3] This series adds support for the phyGATE-Tauri-L.   Yannic Moog
• [PATCH v2 1/3] Add support for phyGATE-Tauri-L-iMX8MM   Yannic Moog
• [PATCH v2 2/3] doc: board: phytec: Add phyGATE-Tauri board documentation   Yannic Moog
• [PATCH v2 3/3] board: phytec: MAINTAINERS: add missing phytec doc files   Yannic Moog
• [PATCH] board: phytec: fix link error when disabling PHYTEC_SOM_DETECTION   Yannic Moog
• [PATCH] board: phytec: fix link error when disabling PHYTEC_SOM_DETECTION   Yannic Moog
• [PATCH v2] board: phytec: fix link error when disabling PHYTEC_SOM_DETECTION   Yannic Moog
• [Upstream] [PATCH] Add Phytec i.MX93 support   Yannic Moog
• [PATCH] Add Phytec i.MX93 support   Yannic Moog
• [PATCH] Add Phytec i.MX93 support   Yannic Moog
• [PATCH V4 0/7] Add Additional Boards and Features to RGxx3   Chris Morgan
• [PATCH V4 1/7] board: rockchip: Refactor panel auto-detect code   Chris Morgan
• [PATCH V4 2/7] spl: Add Kconfig options for ADC   Chris Morgan
• [PATCH V4 3/7] rockchip: boot_mode: Allow rockchip_dnl_key_pressed() in SPL   Chris Morgan
• [PATCH V4 4/7] board: rockchip: Add Recovery Button for Anbernic RGxx3   Chris Morgan
• [PATCH V4 5/7] rockchip: board: Add board_rng_seed() for all Rockchip devices   Chris Morgan
• [PATCH V4 6/7] board: rockchip: Add support for new boards to RGxx3   Chris Morgan
• [PATCH V4 7/7] doc: board: anbernic: Update rgxx3 to add new boards   Chris Morgan
• [PATCH V2] board: rockchip: add Powkiddy X55   Chris Morgan
• [PATCH V4 3/7] rockchip: boot_mode: Allow rockchip_dnl_key_pressed() in SPL   Chris Morgan
• [PATCH V4 3/7] rockchip: boot_mode: Allow rockchip_dnl_key_pressed() in SPL   Chris Morgan
• [PATCH v8 00/16] Introduce initial TI's J784S4 and AM69 support   Apurva Nandan
• [PATCH v8 01/16] arm: mach-k3: Kconfig: Sort SOC_K3 config entries   Apurva Nandan
• [PATCH v8 02/16] arm: mach-k3: Add basic support for J784S4 SoC definition   Apurva Nandan
• [PATCH v8 03/16] arm: dts: Introduce j784s4 and am69 dts from linux kernel   Apurva Nandan
• [PATCH v8 04/16] arm: dts: Add bootph-all for memory node   Apurva Nandan
• [PATCH v8 05/16] arm: mach-k3: Sort SoC JTAG_ID entries   Apurva Nandan
• [PATCH v8 06/16] soc: ti: k3-socinfo: Add entry for J784S4 SoC   Apurva Nandan
• [PATCH v8 07/16] arm: mach-k3: j784s4: Add clk and power support   Apurva Nandan
• [PATCH v8 08/16] drivers: dma: Add support for J784S4 SoC   Apurva Nandan
• [PATCH v8 09/16] board: ti: j784s4: Add board support for J784S4 EVM   Apurva Nandan
• [PATCH v8 10/16] board: ti: j748s4: Add board config yaml files   Apurva Nandan
• [PATCH v8 11/16] board: ti: j784s4: Add boot environment variables   Apurva Nandan
• [PATCH v8 12/16] arm: dts: Introduce j784s4 u-boot dts files   Apurva Nandan
• [PATCH v8 13/16] arm: dts: Introduce am69-sk u-boot dts files   Apurva Nandan
• [PATCH v8 14/16] configs: j784s4_evm: Add defconfig for j784s4 evm board   Apurva Nandan
• [PATCH v8 15/16] configs: Add am69_sk_* defconfig fragments   Apurva Nandan
• [PATCH v8 16/16] doc: board: ti: k3: Add J784S4 EVM and AM69 SK documentation   Apurva Nandan
• [PATCH v8 15/16] configs: Add am69_sk_* defconfig fragments   Apurva Nandan
• [PATCH v8 13/16] arm: dts: Introduce am69-sk u-boot dts files   Apurva Nandan
• [PATCH v8 09/16] board: ti: j784s4: Add board support for J784S4 EVM   Apurva Nandan
• [PATCH v8 04/16] arm: dts: Add bootph-all for memory node   Apurva Nandan
• [PATCH v8 02/16] arm: mach-k3: Add basic support for J784S4 SoC definition   Apurva Nandan
• [PATCH v8 08/16] drivers: dma: Add support for J784S4 SoC   Apurva Nandan
• [PATCH v8 12/16] arm: dts: Introduce j784s4 u-boot dts files   Apurva Nandan
• [PATCH v8 02/16] arm: mach-k3: Add basic support for J784S4 SoC definition   Apurva Nandan
• [PATCH v8 02/16] arm: mach-k3: Add basic support for J784S4 SoC definition   Apurva Nandan
• [PATCH v8 15/16] configs: Add am69_sk_* defconfig fragments   Apurva Nandan
• [PATCH] arch/arm/mach-omap2/omap5/fdt.c: ft_fixup_clocks: use clock-output-names property as fallback (kernel 5.19+)   Romain Naour
• [PATCH u-boot v2019.04-aspeed-openbmc] ARM: dts: aspeed: Add Ampere's BMC platform (AST2600)   Chanh Nguyen
• [PATCH u-boot v2019.04-aspeed-openbmc] ARM: dts: aspeed: Add Ampere's BMC platform (AST2600)   Chanh Nguyen
• [PATCH] arch: mach-k3: Fix incorrect mapping of higher DDR addresses as device memory   Sekhar Nori
• [PATCH 2/2] MAINTAINERS: add Mattijs for Android AVB   Igor Opaniuk
• [PATCH 2/2] MAINTAINERS: add Mattijs for Android AVB   Igor Opaniuk
• [PATCH 1/2] MAINTAINERS: add Mattijs for Android AB   Igor Opaniuk
• [PATCH v2 07/14] stm32mp: add setup_serial_number for stm32mp25   Igor Opaniuk
• [PATCH v2 06/14] stm32mp: add soc.c file   Igor Opaniuk
• [PATCH 04/12] stm32mp: bsec: add support of stm32mp25   Igor Opaniuk
• [PATCH v2 13/14] arm: Rename STM32MP13x   Igor Opaniuk
• [PATCH v1 1/2] imx: scu_api: add implementation of sc_pm_reset_reason   Igor Opaniuk
• [PATCH v1 2/2] imx: imx8: print reset cause   Igor Opaniuk
• [PATCH v1] qemu-arm: round down memory to multiple of 2MB   Igor Opaniuk
• [PATCH v1] vexpress_ca9x4: Enable DM_SERIAL   Ole Orhagen
• [PATCH v1] vexpress_ca9x4: Enable DM_SERIAL   Ole P. Orhagen
• [PATCH] cmd: nvedit: Fix typo in 'illegal character' error   Ivan Orlov
• [PATCH] cmd: license: Add CONFIG_GZIP dependency   Ivan Orlov
• [PATCH v3 3/3] Add imx93-var-som support   Mathieu Othacehe
• [PATCH v4 0/3] Add imx93-var-som support   Mathieu Othacehe
• [PATCH v4 1/3] spl: binman: Disable u_boot_any symbols for i.MX93 boards   Mathieu Othacehe
• [PATCH v4 2/3] mach-imx: Add i.MX93 binman support.   Mathieu Othacehe
• [PATCH v4 3/3] Add imx93-var-som support   Mathieu Othacehe
• [PATCH v4 0/3] Add imx93-var-som support   Mathieu Othacehe
• [PATCH v5 0/3] Add imx93-var-som support   Mathieu Othacehe
• [PATCH v5 1/4] spl: binman: Disable u_boot_any symbols for i.MX93 boards   Mathieu Othacehe
• [PATCH v5 2/4] mach-imx: Add i.MX93 binman support.   Mathieu Othacehe
• [PATCH v5 3/4] imx9: imx93_evk: Add binman support.   Mathieu Othacehe
• [PATCH v5 4/4] Add imx93-var-som support   Mathieu Othacehe
• [PATCH v6 0/4] Add imx93-var-som support   Mathieu Othacehe
• [PATCH v6 1/4] spl: binman: Disable u_boot_any symbols for i.MX93 boards   Mathieu Othacehe
• [PATCH v6 2/4] mach-imx: Add i.MX93 binman support.   Mathieu Othacehe
• [PATCH v6 3/4] imx9: imx93_evk: Add binman support.   Mathieu Othacehe
• [PATCH v6 4/4] Add imx93-var-som support   Mathieu Othacehe
• [PATCH v5 0/3] Add imx93-var-som support   Mathieu Othacehe
• [PATCH v5 0/3] Add imx93-var-som support   Mathieu Othacehe
• [PATCH] Add Phytec i.MX93 support   Mathieu Othacehe
• [PATCH] Add Phytec i.MX93 support   Mathieu Othacehe
• [PATCH] Add Phytec i.MX93 support   Mathieu Othacehe
• [PATCH v2] Add Phytec i.MX93 support   Mathieu Othacehe
• [PATCH v2] Add Phytec i.MX93 support   Mathieu Othacehe
• [PATCH v3] board: phytec: phycore-imx93: Add phyBOARD-Segin-i.MX93 support   Mathieu Othacehe
• [PATCH v3] board: phytec: phycore-imx93: Add phyBOARD-Segin-i.MX93 support   Mathieu Othacehe
• [PATCH v3] board: phytec: phycore-imx93: Add phyBOARD-Segin-i.MX93 support   Mathieu Othacehe
• [PATCH v3] board: phytec: phycore-imx93: Add phyBOARD-Segin-i.MX93 support   Mathieu Othacehe
• [PATCH v3] board: phytec: phycore-imx93: Add phyBOARD-Segin-i.MX93 support   Mathieu Othacehe
• [PATCH] imx9: clock: Fix board_interface_eth_init for FEC   Mathieu Othacehe
• [PATCH v3] board: phytec: phycore-imx93: Add phyBOARD-Segin-i.MX93 support   Mathieu Othacehe
• [PATCH v4] board: phytec: phycore-imx93: Add phyBOARD-Segin-i.MX93 support   Mathieu Othacehe
• [PATCH] cmd: sf: Fix sf probe crash   Weizhao Ouyang
• [PATCH] cmd: sf: Fix sf probe crash   Weizhao Ouyang
• [PATCH] cmd: sf: Fix sf probe crash   Weizhao Ouyang
• [PATCH] cmd: sf: Fix sf probe crash   Weizhao Ouyang
• [PATCH 0/3] Random Number Generator fixes   Weizhao Ouyang
• [PATCH 1/3] firmware: psci: Fix bind_smccc_features psci check   Weizhao Ouyang
• [PATCH 2/3] driver: rng: Fix SMCCC TRNG crash   Weizhao Ouyang
• [PATCH 3/3] cmd: rng: Add rng list command   Weizhao Ouyang
• [PATCH 3/3] cmd: rng: Add rng list command   Weizhao Ouyang
• [PATCH 1/3] firmware: psci: Fix bind_smccc_features psci check   Weizhao Ouyang
• [PATCH v2 0/3] Random Number Generator fixes   Weizhao Ouyang
• [PATCH v2 1/3] firmware: psci: Fix bind_smccc_features psci check   Weizhao Ouyang
• [PATCH v2 2/3] driver: rng: Fix SMCCC TRNG crash   Weizhao Ouyang
• [PATCH v2 3/3] cmd: rng: Add rng list command   Weizhao Ouyang
• [PATCH v2 1/3] firmware: psci: Fix bind_smccc_features psci check   Weizhao Ouyang
• [PATCH v3 0/3] Random Number Generator fixes   Weizhao Ouyang
• [PATCH v3 1/3] firmware: psci: Fix bind_smccc_features psci check   Weizhao Ouyang
• [PATCH v3 2/3] driver: rng: Fix SMCCC TRNG crash   Weizhao Ouyang
• [PATCH v3 3/3] cmd: rng: Add rng list command   Weizhao Ouyang
• AW: [PATCH] rockchip: px30: add support for iesy PX30 SoM OSM-S   Dominik Poggel
• [PATCH 09/13] pinctrl: exynos: Add pinctrl support for Exynos850   Sam Protsenko
• [PATCH 07/13] clk: exynos: Add Samsung clock framework   Sam Protsenko
• [PATCH 04/13] soc: samsung: Add Exynos USI driver   Sam Protsenko
• [PATCH 04/13] soc: samsung: Add Exynos USI driver   Sam Protsenko
• [PATCH 07/13] clk: exynos: Add Samsung clock framework   Sam Protsenko
• [PATCH v2 00/13] arm: exynos: Add E850-96 board   Sam Protsenko
• [PATCH v2 01/13] dt-bindings: soc: samsung: Add Exynos USI   Sam Protsenko
• [PATCH v2 02/13] dt-bindings: soc: samsung: Add Exynos PMU   Sam Protsenko
• [PATCH v2 03/13] dt-bindings: clock: Add Exynos850 clock controller   Sam Protsenko
• [PATCH v2 04/13] soc: samsung: Add Exynos USI driver   Sam Protsenko
• [PATCH v2 05/13] soc: samsung: Add Exynos PMU driver   Sam Protsenko
• [PATCH v2 06/13] clk: exynos: Move pll code into clk-exynos7420   Sam Protsenko
• [PATCH v2 07/13] clk: exynos: Add Samsung clock framework   Sam Protsenko
• [PATCH v2 08/13] clk: exynos: Add Exynos850 clock driver   Sam Protsenko
• [PATCH v2 09/13] pinctrl: exynos: Add pinctrl support for Exynos850   Sam Protsenko
• [PATCH v2 10/13] serial: s5p: Add Exynos850 compatible   Sam Protsenko
• [PATCH v2 11/13] arm: exynos: Add Exynos850 SoC support   Sam Protsenko
• [PATCH v2 12/13] board: samsung: Add support for E850-96 board   Sam Protsenko
• [PATCH v2 13/13] MAINTAINERS: Add new Samsung subsystems   Sam Protsenko
• [PATCH 1/2] MAINTAINERS: add Mattijs for Android AB   Sam Protsenko
• [PATCH 2/2] MAINTAINERS: add Mattijs for Android AVB   Sam Protsenko
• [PATCH v2 00/13] arm: exynos: Add E850-96 board   Sam Protsenko
• extlinux.conf file and fdtoverlay_addr_r (U-Boot 2022.01)   Łukasz Przeniosło
• [PATCH 00/19] sunxi: SPL cleanup part 1   Andre Przywara
• [PATCH 01/19] sunxi: cleanup sunxi-common.h   Andre Przywara
• [PATCH 02/19] sunxi: sun50i-h6: remove unneeded base addresses from header   Andre Przywara
• [PATCH 03/19] sunxi: sun4i: remove unneeded base addresses from header   Andre Przywara
• [PATCH 04/19] sunxi: sun9i: remove unneeded base addresses from header   Andre Przywara
• [PATCH 05/19] sunxi: move #ifdef guards around tzpc_init() to header file   Andre Przywara
• [PATCH 06/19] sunxi: remove common.h inclusion   Andre Przywara
• [PATCH 07/19] sunxi: simplify U-Boot proper only builds   Andre Przywara
• [PATCH 08/19] sunxi: remove unneeded i2c_init_board() call for U-Boot proper   Andre Przywara
• [PATCH 09/19] sunxi: compile clock.c for SPL only   Andre Przywara
• [PATCH 10/19] sunxi: sun4i: make more clock functions SPL only   Andre Przywara
• [PATCH 11/19] sunxi: sun6i: make more clock functions SPL only   Andre Przywara
• [PATCH 12/19] sunxi: sun50i_h6: make more clock functions SPL only   Andre Przywara
• [PATCH 13/19] sunxi: sun8i_a83t: make more clock functions SPL only   Andre Przywara
• [PATCH 14/19] sunxi: sun9i: make more clock functions SPL only   Andre Przywara
• [PATCH 15/19] sunxi: move pinmux setup into separate SPL only file   Andre Przywara
• [PATCH 16/19] sunxi: SPL pinmux: rewrite without #ifdefs   Andre Przywara
• [PATCH 17/19] sunxi: move UART pinmux setup into separate file   Andre Przywara
• [PATCH 18/19] sunxi: SPL pinmux: split out UART pinmux per port   Andre Przywara
• [PATCH 19/19] sunxi: SPL pinmux: rewrite UART setup without #ifdefs   Andre Przywara
• [PATCH] arm: sunxi: Reduce inrush current on Olimex A20-OLinuXino_MICRO   Andre Przywara
• [PATCH v1] net: sun8i-emac: Add support for fixed-link phy   Andre Przywara
• [PATCH v1] net: sun8i-emac: Add support for fixed-link phy   Andre Przywara
• [PATCH v3 4/4] sunxi: Enable SPL FIT loading for 32-bit SoCs   Andre Przywara
• [PATCH 00/19] sunxi: SPL cleanup part 1   Andre Przywara
• [PATCH 2/2] configs: Transpeed 8K618-T: Add Transpeed 8K618-T board support   Andre Przywara
• [PATCH 1/2] arm: dts: Transpeed 8K618-T: Add Transpeed 8K618-T board support   Andre Przywara
• [PATCH RFC 0/6] video: Add UTF-8 support for UEFI applications   Andre Przywara
• [PATCH RFC 2/6] video: console: Parse UTF-8 character sequences   Andre Przywara
• [PATCH RFC 1/6] lib: charset: Fix utf8_to_utf32_stream() return value doc string   Andre Przywara
• [PATCH v2] configs: Transpeed 8K618-T: Add Transpeed 8K618-T board support   Andre Przywara
• [PATCH v1] net: sun8i-emac: Add support for fixed-link phy   Andre Przywara
• [PATCH v1] net: sun8i-emac: Add support for fixed-link phy   Andre Przywara
• [PATCH] sunxi: add defconfig for nanopi_duo2   Andre Przywara
• [PATCH] sunxi: dts: update devicetree files from Linux-v6.8-rc1   Andre Przywara
• [PATCH v4 00/11] An effort to bring DT bindings compliance within U-Boot   Andre Przywara
• [PATCH v4 00/11] An effort to bring DT bindings compliance within U-Boot   Andre Przywara
• [PATCH] sunxi: dts: update devicetree files from Linux-v6.8-rc1   Andre Przywara
• [PATCH 2/5] sunxi: Enable PMIC drivevbus regulator support for USB supplies   Andre Przywara
• [PATCH v1] sunxi: R528: add UART1 support   Andre Przywara
• [PATCH v2] net: sun8i-emac: Add support for fixed-link phy   Andre Przywara
• Pull request: u-boot-sunxi/master for v2024.04   Andre Przywara
• [PATCH v3 4/4] sunxi: Enable SPL FIT loading for 32-bit SoCs   Andre Przywara
• [PATCH v2] configs: Transpeed 8K618-T: Add Transpeed 8K618-T board support   Andre Przywara
• [PATCH] sunxi: add defconfig for nanopi_duo2   Andre Przywara
• [PATCH v3 3/4] sunxi: binman: Support FIT generation for 32-bit SoCs   Andre Przywara
• Pull request: u-boot-sunxi/master for v2024.04   Andre Przywara
• Pull request: u-boot-sunxi/master for v2024.04   Andre Przywara
• [PATCH 3/5] phy: sun4i-usb: Control supplies via the regulator uclass   Andre Przywara
• [PATCH v3] common: usb-hub: Reset hub port before scanning   Andre Przywara
• [PATCH] sunxi: H616: Add OrangePi Zero 2W board support   Andre Przywara
• [PATCH 1/1] sunxi: sun4i: Reduce cpu clock at SPL initialization to 144 MHz   Andre Przywara
• [PATCH 1/1] sunxi: sun4i: Reduce cpu clock at SPL initialization to 144 MHz   Andre Przywara
• [PATCH] configs: visionfive2: Disable ENV_IS_NOWHERE   Shengyu Qu
• [RFC PATCH 00/16] Introduce ICSSG Ethernet driver   Roger Quadros
• [RFC PATCH 00/16] Introduce ICSSG Ethernet driver   Roger Quadros
• [PATCH] board: ti: am64: Support TMDS64EVM   Roger Quadros
• [RFC PATCH 00/16] Introduce ICSSG Ethernet driver   Roger Quadros
• [PATCH 0/4] arm: mach-k3: am64: Add NAND configuration   Roger Quadros
• [PATCH 1/4] memory: ti-gpmc: Fix build   Roger Quadros
• [PATCH 2/4] mtd: rawnand: omap_gpmc: Use DT provided IO address   Roger Quadros
• [PATCH 3/4] arm: mach-k3: am642: Define NAND boot device   Roger Quadros
• [PATCH 4/4] configs: am64x_evm_a53_defconfig: Enable NAND   Roger Quadros
• [RFC PATCH 00/16] Introduce ICSSG Ethernet driver   Roger Quadros
• [PATCH 04/10] board: ti: am64x: Set fdtfile from C code instead of findfdt script   Roger Quadros
• [PATCH 01/10] board: ti: common: Introduce a common fdt ops library   Roger Quadros
• [PATCH 06/10] board: ti: j721e: Set fdtfile from C code instead of findfdt script   Roger Quadros
• [RFC PATCH 12/16] arm: dts: k3-am65x-binman: Add ICSSG2 overlay and configuration   Roger Quadros
• [PATCH 4/4] configs: am64x_evm_a53_defconfig: Enable NAND   Roger Quadros
• [RFC PATCH 12/16] arm: dts: k3-am65x-binman: Add ICSSG2 overlay and configuration   Roger Quadros
• [PATCH 4/4] configs: am64x_evm_a53_defconfig: Enable NAND   Roger Quadros
• [PATCH V2 10/10] include: env: ti: Drop default_findfdt   Roger Quadros
• [PATCH V2 00/10] board/ti: k3 boards: Stop using findfdt   Roger Quadros
• [PATCH 0/4] arm: mach-k3: am64: Add NAND configuration   Roger Quadros
• [PATCH v7 15/17] configs: Add am69_sk_* defconfig fragments   Roger Quadros
• [PATCH v2 0/2] mtd: nand: omap_gpmc: Fix NAND for AM335x   Roger Quadros
• [PATCH v2 0/4] mtd: omap_gpmc: Fix GPMC & NAND drivers   Roger Quadros
• [PATCH v2 1/4] memory: ti-gpmc: Fix build   Roger Quadros
• [PATCH v2 2/4] mtd: rawnand: omap_gpmc: Use DT provided IO address   Roger Quadros
• [PATCH v2 3/4] mtd: rawnand: omap_gpmc: fix OF based partition parsing for NAND   Roger Quadros
• [PATCH v2 4/4] arm: mach-k3: am642: Define NAND boot device   Roger Quadros
• [RFC PATCH 2/2] board: ti: am65x: Move to using Extension framework   Roger Quadros
• [PATCH v4 5/7] configs: am62x_evm_*: Enable USB and DFU support   Roger Quadros
• [PATCH v4 2/7] usb: dwc3: Switch to device mode on gadget start   Roger Quadros
• [PATCH v4 6/7] beagleplay: Add DFU support   Roger Quadros
• [PATCH v4 5/7] configs: am62x_evm_*: Enable USB and DFU support   Roger Quadros
• [PATCH 0/5] k3-j721e: beagleboneai: Fix USB   Roger Quadros
• [PATCH 1/5] board: ti: j721e: Drop SERDES PHY init from board file   Roger Quadros
• [PATCH 2/5] usb: cdns3: avoid error messages if phys don't exist   Roger Quadros
• [PATCH 3/5] arm: dts: k3-j721e: Fix USB0 operation   Roger Quadros
• [PATCH 4/5] arm: dts: k3-j721e-beagleboneai64: Fix USB operation   Roger Quadros
• [PATCH 5/5] configs/j721e_beagleboneai64_a72_defconfig: Enable Sierra PHY   Roger Quadros
• [PATCH v4 2/7] usb: dwc3: Switch to device mode on gadget start   Roger Quadros
• [PATCH 4/5] arm: dts: k3-j721e-beagleboneai64: Fix USB operation   Roger Quadros
• [PATCH 4/5] arm: dts: k3-j721e-beagleboneai64: Fix USB operation   Roger Quadros
• [PATCH v4 2/7] usb: dwc3: Switch to device mode on gadget start   Roger Quadros
• [PATCH 03/10] soc: ti: k3-navss-ringacc: Initialize base address of ring cfg registers   Roger Quadros
• [PATCH v1 1/1] net: ti: am65-cpsw-nuss: Remove incorrect RGMII_ID bit functionality   Roger Quadros
• [PATCH 4/5] arm: dts: k3-j721e-beagleboneai64: Fix USB operation   Roger Quadros
• [PATCH v8 01/16] arm: mach-k3: Kconfig: Sort SOC_K3 config entries   Roger Quadros
• [PATCH v8 05/16] arm: mach-k3: Sort SoC JTAG_ID entries   Roger Quadros
• [PATCH v8 06/16] soc: ti: k3-socinfo: Add entry for J784S4 SoC   Roger Quadros
• [PATCH v8 07/16] arm: mach-k3: j784s4: Add clk and power support   Roger Quadros
• [PATCH v8 08/16] drivers: dma: Add support for J784S4 SoC   Roger Quadros
• [PATCH v8 13/16] arm: dts: Introduce am69-sk u-boot dts files   Roger Quadros
• [PATCH 0/3] mux: Drop usage of "u-boot,mux-autoprobe"   Roger Quadros
• [PATCH 1/3] mux: autoprobe if "idle-states" present in device tree   Roger Quadros
• [PATCH 2/3] arm: dts: k3-u-boot: Drop usage of "u-boot, mux-autoprobe"   Roger Quadros
• [PATCH 3/3] arm: dts: k3-u-boot: Add missing "bootph-all" property to MUX nodes.   Roger Quadros
• [PATCH] video: dw_hdmi: Fix compiler warnings with gcc-14   Khem Raj
• [PATCH V4 1/2] drivers: watchdog: add andes atcwdt200 support   Randolph
• [PATCH V4 2/2] configs: andes: add watchdog support fot andes ae350   Randolph
• [PATCH v3] common: usb-hub: Reset hub port before scanning   Shantur Rathore
• [PATCH v3] arch: arm: Kconfig: Enable BOOTSTD_FULL for Rockchip SoCs   Shantur Rathore
• [PATCH v3] common: usb-hub: Reset hub port before scanning   Shantur Rathore
• [PATCH v3] arch: arm: Kconfig: Enable BOOTSTD_FULL for Rockchip SoCs   Shantur Rathore
• [PATCH v1] Kconfig: boot: Imply BOOTSTD_DEFAULT when BOOTSTD_FULL=y   Shantur Rathore
• [PATCH v3] arch: arm: Kconfig: Enable BOOTSTD_FULL for Rockchip SoCs   Shantur Rathore
• [PATCH v3] common: usb-hub: Reset hub port before scanning   Shantur Rathore
• [PATCH v5] arch: arm: mach-rockchip: Kconfig: Enable BOOTSTD_FULL for RK3399 and RK3588   Shantur Rathore
• [PATCH v3] arch: arm: Kconfig: Enable BOOTSTD_FULL for Rockchip SoCs   Shantur Rathore
• [PATCH V3 1/6] dt-bindings: nvmem: layouts: add U-Boot environment variables layout   Miquel Raynal
• [PATCH 1/1] cmd: mtd: avoid unintentional integer overflow   Miquel Raynal
• [PATCH V3 1/6] dt-bindings: nvmem: layouts: add U-Boot environment variables layout   Miquel Raynal
• [PATCH RFC 0/6] video: Add UTF-8 support for UEFI applications   Janne Grunau via B4 Relay
• [PATCH RFC 1/6] lib: charset: Fix utf8_to_utf32_stream() return value doc string   Janne Grunau via B4 Relay
• [PATCH RFC 2/6] video: console: Parse UTF-8 character sequences   Janne Grunau via B4 Relay
• [PATCH RFC 3/6] lib/charset: Map cp437 low chars (0x01 - 0x1f) from unicode   Janne Grunau via B4 Relay
• [PATCH RFC 4/6] efi_selftest: Add international characters test   Janne Grunau via B4 Relay
• [PATCH RFC 5/6] efi_selftest: Add box drawing character selftest   Janne Grunau via B4 Relay
• [PATCH RFC 6/6] efi_selftest: Add symbol character selftest   Janne Grunau via B4 Relay
• [PATCH] video: Support VIDEO_X2R10G10B10 in truetype console   Janne Grunau via B4 Relay
• [PATCH] video: console: Fix buffer overflow in cmd 'font list'   Janne Grunau via B4 Relay
• [PATCH] wdt: add HiSilicon watchdog driver support   Yang Xiwen via B4 Relay
• [PATCH] mmc: hi6220-dwmmc: handle clocks and resets if CONFIG_CLK and CONFIG_DM_RESET enabled   Yang Xiwen via B4 Relay
• [PATCH 0/3] net: hifemac: a few cleanups   Yang Xiwen via B4 Relay
• [PATCH 1/3] net: hifemac_mdio: use log_msg_ret() correctly, report error by dev_err()   Yang Xiwen via B4 Relay
• [PATCH 2/3] net: hifemac: fix log reporting   Yang Xiwen via B4 Relay
• [PATCH 3/3] net: hifemac: register MDIO bus device for subnode   Yang Xiwen via B4 Relay
• [PATCH] reset: reset-hisilicon: also handle #reset-cells = <2>   Yang Xiwen via B4 Relay
• [PATCH RFC 0/2] clk: add HiSilicon CLK framework   Yang Xiwen via B4 Relay
• [PATCH RFC 1/2] clk: ccf: Export clk_register_mux_table() in linux/clk-provider.h   Yang Xiwen via B4 Relay
• [PATCH RFC 2/2] clk: add clock framework for HiSilicon SoCs   Yang Xiwen via B4 Relay
• [PATCH RFC 0/2] clk: add HiSilicon CLK framework   Yang Xiwen via B4 Relay
• [PATCH RFC 1/2] clk: ccf: Export clk_register_mux_table() in linux/clk-provider.h   Yang Xiwen via B4 Relay
• [PATCH RFC 2/2] clk: add clock framework for HiSilicon SoCs   Yang Xiwen via B4 Relay
• [PATCH v2 0/4] net: hifemac: a few cleanups   Yang Xiwen via B4 Relay
• [PATCH v2 1/4] net: hifemac_mdio: use log_msg_ret() correctly, report error by dev_err()   Yang Xiwen via B4 Relay
• [PATCH v2 2/4] net: hifemac: fix log reporting   Yang Xiwen via B4 Relay
• [PATCH v2 3/4] net: hifemac: register MDIO bus device for subnode   Yang Xiwen via B4 Relay
• [PATCH v2 4/4] net: hifemac: implement `net stats` needed ops   Yang Xiwen via B4 Relay
• [PATCH v3 0/5] net: hifemac: a few cleanups   Yang Xiwen via B4 Relay
• [PATCH v3 1/5] net: hifemac_mdio: use log_msg_ret() correctly, report error by dev_err()   Yang Xiwen via B4 Relay
• [PATCH v3 2/5] net: hifemac: fix log reporting   Yang Xiwen via B4 Relay
• [PATCH v3 3/5] net: hifemac: register MDIO bus device for subnode   Yang Xiwen via B4 Relay
• [PATCH v3 4/5] net: hifemac: implement `net stats` needed ops   Yang Xiwen via B4 Relay
• [PATCH v3 5/5] net: hifemac: make some functions static   Yang Xiwen via B4 Relay
• [PATCH] serial: pl01x: set baudrate when probing   Yang Xiwen via B4 Relay
• [PATCH v2 1/3] Add support for phyGATE-Tauri-L-iMX8MM   Teresa Remmet
• [PATCH v2 2/3] doc: board: phytec: Add phyGATE-Tauri board documentation   Teresa Remmet
• [PATCH v2 3/3] board: phytec: MAINTAINERS: add missing phytec doc files   Teresa Remmet
• [PATCH 0/1] This patch adds support for the entropy generator present in   Max Resch
• [PATCH 1/1] add turris-rwtm-rng from CZ.NIC rWTM Firmware   Max Resch
• [PATCH v2] rng: Add Turris Mox rWTM RNG driver   Max Resch
• [PATCH v7 7/9] arm: dts: k3-j7200-binman: Add firewall configurations   Thomas Richard
• [PATCH v3 0/8] Suspend to RAM support for K3 J7200   Thomas Richard
• [PATCH v3 1/8] DO NOT MERGE: arm: dts: k3-j7200-r5-common: Add pmic node for esm   Thomas Richard
• [PATCH v3 2/8] configs: j7200_evm_r5: Used reserved memory in DDR for stack   Thomas Richard
• [PATCH v3 3/8] configs: j7200_evm_r5: Move address used for allocation in the reserved space   Thomas Richard
• [PATCH v3 4/8] board: ti: j721e: Add resume detection for J7200   Thomas Richard
• [PATCH v3 5/8] ram: k3-ddrss: Add exit retention support   Thomas Richard
• [PATCH v3 6/8] board: ti: j721e: Add the missing part of exit retention for k3-ddrss (J7200)   Thomas Richard
• [PATCH v3 7/8] board: ti: j721e: During resume spl notify tf-a that the board is resuming   Thomas Richard
• [PATCH v3 8/8] arm: mach-k3: j7200: Skip fit processing when resuming   Thomas Richard
• [PATCH v3 0/8] Suspend to RAM support for K3 J7200   Thomas Richard
• [RESEND PATCH v2] board: rockchip: Add the Turing RK1 SoM   Joshua Riek
• [PATCH v3 4/8] dts: Add alternative location for upstream DTB builds   Tom Rini
• Please pull u-boot-dm next   Tom Rini
• [PATCH 0/9] dts: Move to SoC-specific build rules   Tom Rini
• [PATCH v3 4/8] dts: Add alternative location for upstream DTB builds   Tom Rini
• [PATCH 00/26] sync am65x device tree with Linux v6.7-rc1   Tom Rini
• [PATCH v3 4/8] dts: Add alternative location for upstream DTB builds   Tom Rini
• [PATCH v3 4/8] dts: Add alternative location for upstream DTB builds   Tom Rini
• [PATCH 0/9] dts: Move to SoC-specific build rules   Tom Rini
• [PATCH] sbp1: Add support for IBM SBP1 board   Tom Rini
• [PATCH v3 4/8] dts: Add alternative location for upstream DTB builds   Tom Rini
• [PATCH] mach-snapdragon: Move APQ8016 SoC derived board code   Tom Rini
• [PATCH v2 00/26] sync am65x device tree with Linux v6.7-rc1   Tom Rini
• [ANN] U-Boot v2024.01-rc6 released   Tom Rini
• [PATCH] mach-snapdragon: Move APQ8016 SoC derived board code   Tom Rini
• [PATCH 00/26] sync am65x device tree with Linux v6.7-rc1   Tom Rini
• [PATCH v3 5/8] doc: devicetree: Updates for devicetree-rebasing subtree   Tom Rini
• [PATCH v2] MAINTAINERS: Fix ANDROID AB unknown file entry   Tom Rini
• [PATCH 0/1] MAINTAINERS: fix folders within glob pattern   Tom Rini
• [PATCH v3] test/py: i2c: Add tests for i2c command   Tom Rini
• [PATCH v4 4/9] arm: armv7: save boot arguments   Tom Rini
• [PATCH v3] test/py: mii: Add tests for mii command   Tom Rini
• MPC837XERDB DM_I2C (and related) migrations   Tom Rini
• [PATCH v3 5/8] doc: devicetree: Updates for devicetree-rebasing subtree   Tom Rini
• [PATCH v7] fdt: Allow the devicetree to come from a bloblist   Tom Rini
• [PATCH v3 5/8] doc: devicetree: Updates for devicetree-rebasing subtree   Tom Rini
• [PATCH v3 5/8] doc: devicetree: Updates for devicetree-rebasing subtree   Tom Rini
• [PATCH v7 0/9] ATF and OP-TEE Firewalling for K3 devices.   Tom Rini
• [PATCH v1 1/1] drivers: misc: Add socfpga_dtreg driver for Intel SoCFPGA   Tom Rini
• [PATCH] iommu: dont fail silently   Tom Rini
• [PATCH] test.py: Update pycryptodomex to address CVE-2023-52323   Tom Rini
• [PATCH] arm: dts: iot2050: Fix by syncing from Linux   Tom Rini
• [PATCH] tools: docker: Drop the git user name and email configuration   Tom Rini
• [PATCH] fw_env: fix reading NVMEM device's "compatible" value   Tom Rini
• [PATCH] fw_env: rename variables holding env data content   Tom Rini
• [PATCH] fw_env: keep calling read() until whole flash block is read   Tom Rini
• [PATCH v2 1/1] fw_env: autodetect NAND erase size and env sectors   Tom Rini
• Please pull u-boot-tegra staging   Tom Rini
• [PATCH 2/2] coreboot: Switch to a monospaced font   Tom Rini
• [ANN] U-Boot v2024.01 released   Tom Rini
• Please pull u-boot-dm/next   Tom Rini
• [ANN] U-Boot v2024.01 released   Tom Rini
• booti usage offset requirements for compressed kernel and initrd with dtb   Tom Rini
• [PATCH] boot: add support for button commands   Tom Rini
• Fwd: New Defects reported by Coverity Scan for Das U-Boot   Tom Rini
• [PATCH 00/10] board/ti: k3 boards: Stop using findfdt   Tom Rini
• [PATCH 1/4] riscv: sophgo: milkv_duo: initial support added   Tom Rini
• [v2] Pull request: Please pull u-boot-imx-master-20240108   Tom Rini
• [PATCH v9 2/2] arm64: boot: Support Flat Image Tree   Tom Rini
• Please pull u-boot-samsung master   Tom Rini
• Pull request rng-2024-04-rc1   Tom Rini
• Please pull u-boot-samsung master   Tom Rini
• [PATCH 4/4] configs: am64x_evm_a53_defconfig: Enable NAND   Tom Rini
• [PATCH 4/4] configs: am64x_evm_a53_defconfig: Enable NAND   Tom Rini
• [PATCH 4/4] configs: am64x_evm_a53_defconfig: Enable NAND   Tom Rini
• Pull request smbios-2024-04-rc1   Tom Rini
• Fwd: New Defects reported by Coverity Scan for Das U-Boot   Tom Rini
• [PATCH] getchar(): Correct usage   Tom Rini
• [PATCH v1 1/3] arm: config: xea: Update environment variables for XEA board (imx287)   Tom Rini
• Please pull u-boot-marvell/master   Tom Rini
• [PATCH 4/4] configs: am64x_evm_a53_defconfig: Enable NAND   Tom Rini
• [PATCH 1/5] omap3: Make SPL_OMAP3_ID_NAND depend on NAND_OMAP_GPMC   Tom Rini
• [PATCH 2/5] cmd/mtdparts: Make this select MTD_PARTITIONS   Tom Rini
• [PATCH 3/5] env: Make ENV_IS_IN_SPI_FLASH depend on SPI flash being present   Tom Rini
• [PATCH 4/5] cmd/flash: Make this default y for CFI and NOR only   Tom Rini
• [PATCH 5/5] mtd: Make CONFIG_MTD be the gate symbol for the menu   Tom Rini
• [PATCH] test/py: net_boot: Add test cases for net boot   Tom Rini
• [PATCH 1/1] get_maintainer.pl: slightly modify penguin_chief   Tom Rini
• [PATHv3 0/8] net fixes prior lwip   Tom Rini
• [GIT PULL] Please pull u-boot-dfu-20240111   Tom Rini
• [PATCH 4/5] arm: dts: k3-j721e-beagleboneai64: Fix USB operation   Tom Rini
• [PATCH 01/10] board: ti: am62x: Init DRAM size in R5/A53 SPL   Tom Rini
• [PATCH RESEND 1/2] dt-bindings: phy-mtk-tphy: add properties for phy tuning   Tom Rini
• [PATCH RESEND 2/2] phy: phy-mtk-tphy: add properties for phy tuning   Tom Rini
• [PATCH] boot: Support decompressing non-kernel OS images   Tom Rini
• [PATCH 1/1] test: build test/boot for CONFIG_UT_BOOTSTD=n   Tom Rini
• [PATCH 1/1] boot: CONFIG_CEDIT must depend on CONFIG_EXPO   Tom Rini
• [PATCH 1/1] test: CONFIG_UT_BOOTSTD must depend on CONFIG_BOOTSTD   Tom Rini
• [PATCH] test: fs: fs-test: Move the tests to use sha256sum   Tom Rini
• [PATCH v3 1/2] tools: kwbimage: Allow disabling build on non-mvebu platforms   Tom Rini
• [PATCH v3 2/2] tools: fix build without LIBCRYPTO support   Tom Rini
• [PATCH v2] android_ab: don't ignore ab_control_store return code   Tom Rini
• [PATCH v2] arm: spl: Use separate fault handlers instead of a single common one   Tom Rini
• [PATCH 0/2] MAINTAINERS: add Mattijs for Android AB / AVB   Tom Rini
• [PATCH v2] test/py: net_boot: Add test cases for net boot   Tom Rini
• [PATCH v4 5/7] configs: am62x_evm_*: Enable USB and DFU support   Tom Rini
• [PATCH] test/py: saveenv: Add a test for saveenv command   Tom Rini
• Please pull u-boot-samsung master   Tom Rini
• [PATCH] test/py: reset: Add a test for reset command   Tom Rini
• [PATCH v5 8/8] fdt: get FDT from bloblist   Tom Rini
• [PATCH 3/3] arm: mvebu: helios-4: add defconfig for spi booting   Tom Rini
• [PATCH 3/3] arm: mvebu: helios-4: add defconfig for spi booting   Tom Rini
• [PATCH 5/5] doc: update requirements.txt   Tom Rini
• Pull request efi-2024-04-rc1   Tom Rini
• [PULL] u-boot-sh/master-sync-dts-663   Tom Rini
• [PATCH v13 00/24] Modernize U-Boot shell   Tom Rini
• [Upstream] [PATCH v4 0/2] *** Add support for phyCORE-AM62x ***   Tom Rini
• [PATCH v5 8/8] fdt: get FDT from bloblist   Tom Rini
• [PULL] Pull request for u-boot-nand-20240115   Tom Rini
• Pull request: Please pull u-boot-imx-20240115   Tom Rini
• Please pull qcom-2024.04-rc1   Tom Rini
• [PATCH 5/5] test: unit test for smbios command   Tom Rini
• [UBOOT PATCH v4] test/py: net: Add dhcp abort test   Tom Rini
• [PATCH] test/py: mdio: Add tests for mdio command   Tom Rini
• [PATCH v3] test/py: mii: Add tests for mii command   Tom Rini
• [PATCH v3] test/py: i2c: Add tests for i2c command   Tom Rini
• [PATCH] test/py: memtest: Add tests for mtest command   Tom Rini
• [PATCH] test.py: Update pycryptodomex to address CVE-2023-52323   Tom Rini
• [PATCH v2 1/8] cmd/mem.c: use memmove in do_mem_cp()   Tom Rini
• [PATCH v4 1/2] board: phytec: am62x: Add PHYTEC phyCORE-AM62x SoM   Tom Rini
• [PATCH v4 2/2] doc: board: phytec: Add phyCORE-AM62x   Tom Rini
• [PATCH V4] ARM add initial support for the Phytium Pe2201 Board.   Tom Rini
• [PATCH v2] reset: npcm: Add support for Nuvoton NPCM BMC family   Tom Rini
• [PATCH v2 2/2] smbios: copy QEMU tables   Tom Rini
• [PATCH] arm: dts: k3-j721e-binman: Add support for HS-SE 2.0   Tom Rini
• [PATCH v2 1/1] lib: smbios: remove redundant next_header()   Tom Rini
• Pull request efi-2024-04-rc1-2   Tom Rini
• [GIT PULL] xilinx patches for v2024.04-rc1-v2   Tom Rini
• [PATCH] CI: Move to latest Ubuntu "Jammy" tag   Tom Rini
• [PATCH] test/py/requirements.txt: Update packaging requirement   Tom Rini
• [PATCH] test: test_trace.py: Handle newer trace-cmd report formats   Tom Rini
• [PATCH] test: test_trace.py: Have trace-cmd report always use -l   Tom Rini
• [PATCH 1/1] docker: build QEMU v8.2.0   Tom Rini
• [PATCH] test/py/requirements.txt: Update packaging requirement   Tom Rini
• [PATCH] CI: Move to latest Ubuntu "Jammy" tag   Tom Rini
• [PATCH] test: test_trace.py: Have trace-cmd report always use -l   Tom Rini
• [UBOOT PATCH v4] test/py: net: Add dhcp abort test   Tom Rini
• [PATCH v13 00/24] Modernize U-Boot shell   Tom Rini
• Fwd: New Defects reported by Coverity Scan for Das U-Boot   Tom Rini
• [PATCH v4 0/6] board: siemens: clean up subfolders   Tom Rini
• [PATCH] docker: Add tools/buildman/requirements.txt to the cache   Tom Rini
• [PATCH 1/1] boot: boot_flow_iter_set() called with uninitialized methods_flag   Tom Rini
• [PATCH v3 07/11] lib: vsprintf: enable '%pbl' format specifier   Tom Rini
• [PATCH v2 RESEND 2/2] nvme: Update nvme_scan_namespace to keep trying on busy   Tom Rini
• Pull request: u-boot-rockchip-20240119   Tom Rini
• [resend PATCH] bootdev: avoid infinite probe loop   Tom Rini
• [PATCH 1/1] boot: remove dead code in bootflow_check()   Tom Rini
• [PATCH 1/1] boot: superfluous assignment in bootflow_menu_new()   Tom Rini
• [PATCH 1/1] cmd: bootflow: remove dead code in do_bootflow_cmdline()   Tom Rini
• [PATCH v2 2/2] tools: binman: ti_board_cfg: Check for linting problems   Tom Rini
• [PATCH v2 1/2] board: ti: *-cfg.yaml: Adhere to yamllint rules   Tom Rini
• [PATCH 1/2] include: env: ti: ti_common: Fix a missing semicolon   Tom Rini
• [PATCH 2/2] include: env: ti: add default for do_main_cpsw0_qsgmii_phyinit   Tom Rini
• [PATCH] board: ti: am64: Support TMDS64EVM   Tom Rini
• [PATCH] arch: mach-k3: Fix incorrect mapping of higher DDR addresses as device memory   Tom Rini
• [PATCH 1/1] smbios: buffer overflow when zeroing entry point   Tom Rini
• [PATCH 1/2] smbios: shorten sysinfo_str declarations and use   Tom Rini
• [PATCH 2/2] smbios: fix matching issues for table types   Tom Rini
• [PATCH 1/1] get_maintainer.pl: slightly modify penguin_chief   Tom Rini
• [PATCH] test/py: bootstage: Add test for bootstage command   Tom Rini
• [PATCH 1/1] test: Skip cleanup test if not built out of tree   Tom Rini
• [PATCH 1/2] lib: rsa: Fix PKCS11 URI if one is not given in `keydir`   Tom Rini
• [PATCH 2/2] lib: rsa: Allow legacy URI specification without "pkcs11:"   Tom Rini
• [PATCH] iommu: dont fail silently   Tom Rini
• [PATCH v2 RESEND 1/2] nvme: Fix error code and log to indicate busy   Tom Rini
• [PATCH v2 RESEND 2/2] nvme: Update nvme_scan_namespace to keep trying on busy   Tom Rini
• [PATCH v4] drivers: pci: Fix dm_pci_map_bar() to support 64b BARs   Tom Rini
• [PATCH] image-host: refactor and protect for very long filenames   Tom Rini
• [PATCH] cmd: nvedit: Fix typo in 'illegal character' error   Tom Rini
• [PATCH] cmd: license: Add CONFIG_GZIP dependency   Tom Rini
• [PATCH] getchar(): Correct usage   Tom Rini
• [PATCH] headers: don't depend on errno.h being available   Tom Rini
• [PULL] Pull request for u-boot master / v2024.04 = u-boot-stm32-20240119   Tom Rini
• [PATCH 1/1] riscv: Support building with Clang   Tom Rini
• [PATCH v1] Kconfig: boot: Imply BOOTSTD_DEFAULT when BOOTSTD_FULL=y   Tom Rini
• [PATCH V2 00/10] board/ti: k3 boards: Stop using findfdt   Tom Rini
• [PATCH 01/10] board: ti: am62x: Init DRAM size in R5/A53 SPL   Tom Rini
• [PATCH 4/5] arm: dts: k3-j721e-beagleboneai64: Fix USB operation   Tom Rini
• [PATCH 0/5] k3-j721e: beagleboneai: Fix USB   Tom Rini
• ACPI Vendor ID Request   Tom Rini
• [PATCH v4 00/11] An effort to bring DT bindings compliance within U-Boot   Tom Rini
• [PATCH] x86: Make default_print_cpuinfo be a weak alias for print_cpuinfo   Tom Rini
• Pull request: SoCFPGA changes for commit 3c9bb8fbdc77f   Tom Rini
• Pull request efi-2024-04-rc1-3   Tom Rini
• [PATCH v4 0/6] board: siemens: clean up subfolders   Tom Rini
• [PATCH v5 0/7] board: siemens: clean up subfolders   Tom Rini
• Pull request: Please pull u-boot-imx-20240115   Tom Rini
• [PATCH 3/5] board: rockchip: Add Sonoff iHost board   Tom Rini
• [PATCH 4/5] arm: dts: k3-j721e-beagleboneai64: Fix USB operation   Tom Rini
• Please pull u-boot-marvell/master   Tom Rini
• [PATCH v4 00/11] An effort to bring DT bindings compliance within U-Boot   Tom Rini
• [PATCH v3 4/6] rockchip: find U-boot proper boot device by inverting the logic that sets it   Tom Rini
• [PATCH v4 0/6] rpi5: initial support   Tom Rini
• [PATCH v3] common: usb-hub: Reset hub port before scanning   Tom Rini
• [PATCH v7] fdt: Allow the devicetree to come from a bloblist   Tom Rini
• [PATCH 1/5] omap3: Make SPL_OMAP3_ID_NAND depend on NAND_OMAP_GPMC   Tom Rini
• [PATCH 01/16] kbuild: Allow for CONFIG_SYS_CONFIG_NAME to be unset   Tom Rini
• [PATCH 02/16] xilinx_mbv: Remove empty config header   Tom Rini
• [PATCH 03/16] coreboot: Remove empty config header   Tom Rini
• [PATCH 04/16] bayleybay: Remove empty config header   Tom Rini
• [PATCH 05/16] cherryhill: Remove empty config header   Tom Rini
• [PATCH 06/16] cougarcanyon2: Remove empty config header   Tom Rini
• [PATCH 07/16] crownbay: Remove empty config header   Tom Rini
• [PATCH 08/16] edison: Remove empty config header   Tom Rini
• [PATCH 09/16] efi-x86_app: Remove empty config header   Tom Rini
• [PATCH 10/16] efi-x86_payload: Remove empty config header   Tom Rini
• [PATCH 11/16] galileo: Remove empty config header   Tom Rini
• [PATCH 12/16] minnowmax: Remove empty config header   Tom Rini
• [PATCH 13/16] qemu-x86*: Remove empty config header   Tom Rini
• [PATCH 14/16] slimbootloader: Remove empty config header   Tom Rini
• [PATCH 15/16] hc2910-2aghd05: Remove empty config header   Tom Rini
• [PATCH 16/16] Kconfig: Centralize prompting for SYS_CONFIG_NAME   Tom Rini
• Fwd: New Defects reported by Coverity Scan for Das U-Boot   Tom Rini
• Fwd: New Defects reported by Coverity Scan for Das U-Boot   Tom Rini
• [PATCH 01/20] Convert CONFIG_SPL_STACK to Kconfig   Tom Rini
• [PATCH 02/16] xilinx_mbv: Remove empty config header   Tom Rini
• [PATCH v7] fdt: Allow the devicetree to come from a bloblist   Tom Rini
• [PATCH v3 07/11] lib: vsprintf: enable '%pbl' format specifier   Tom Rini
• [PATCH 01/20] Convert CONFIG_SPL_STACK to Kconfig   Tom Rini
• [PATCH 02/16] xilinx_mbv: Remove empty config header   Tom Rini
• [PATCH v6 0/7] board: siemens: clean up subfolders   Tom Rini
• [PATCH v2 2/4] cmd: provide command to display SMBIOS information   Tom Rini
• [PATCH 1/1] riscv: separate .data and .text sections of EFI binaries   Tom Rini
• [PATCH v2 2/4] cmd: provide command to display SMBIOS information   Tom Rini
• [PATCH v1 0/1] Fix booting kernels with ATAGS and extlinux   Tom Rini
• [PATCH v2 1/1] riscv: Support building with Clang   Tom Rini
• [PATCH v1 0/1] Fix booting kernels with ATAGS and extlinux   Tom Rini
• [PATCH v1 0/1] Fix booting kernels with ATAGS and extlinux   Tom Rini
• [PATCH v4 00/11] An effort to bring DT bindings compliance within U-Boot   Tom Rini
• [PATCH v3 5/6] configs: enable smbios command on sandbox   Tom Rini
• [PATCH 1/1] cmd: increase default for SYS_MAXARGS   Tom Rini
• [PATCH] headers: don't depend on errno.h being available   Tom Rini
• [PATCH v1 1/4] board: verdin-am62: improve comment on usb phy core voltage   Tom Rini
• [PATCH v3] board: ti: common: board_detect: Fix EEPROM offset read for 1-byte   Tom Rini
• [PATCH v2 1/1] cmd: bootmenu: rename U-Boot console to Exit   Tom Rini
• [PATCH v2] common: console: Fix print complete stdio device list   Tom Rini
• [PATCH] docker: Add tools/buildman/requirements.txt to the cache   Tom Rini
• [PATCH 1/1] lib: add comment in utf8_to_utf32_stream()   Tom Rini
• [PATCH 1/1] test: enhance unicode_test_utf8_to_utf32_stream()   Tom Rini
• [PATCH] reset: reset-hisilicon: also handle #reset-cells = <2>   Tom Rini
• [PATCH v4 00/11] An effort to bring DT bindings compliance within U-Boot   Tom Rini
• Pull request smbios-2024-04-rc1-2   Tom Rini
• [PULL] u-boot-sh/master-cleanup   Tom Rini
• [PATCH v2 1/3] riscv: conflicting SPDX license linker scripts   Tom Rini
• Pull request: u-boot-sunxi/master for v2024.04   Tom Rini
• [PATCH] test/py: spi: Add tests for SPI flash device   Tom Rini
• [PATCH] test/py: nand: Add tests for NAND flash device   Tom Rini
• Pull request: u-boot-sunxi/master for v2024.04   Tom Rini
• [PATCH] pytest: update requirements.txt   Tom Rini
• [PATCH] test/py: zynqmp_rpu: Add test for loading RPU apps   Tom Rini
• [PATCH] test/py: gpio: Add gpio pins generic test   Tom Rini
• [PATCH] test/py: secure: Add secure tests for Zynq & ZynqMP   Tom Rini
• [PATCH] test/py: mmc: Add tests for MMC device   Tom Rini
• [PATCH] test/py: usb: Add tests for USB device   Tom Rini
• [PATCH] test/py: scsi: Add test for scsi commands   Tom Rini
• Pull request: u-boot-spi/master   Tom Rini
• Pull request efi-2024-04-rc1-4   Tom Rini
• Fwd: New Defects reported by Coverity Scan for Das U-Boot   Tom Rini
• [PATCH v5 0/8] Move framebuffer reservation for SPL to RAM end   Tom Rini
• [PATCH v2] common: splash_source: Don't compile ubifs splash cmd for SPL build   Tom Rini
• [PATCH] video: tidss: Use DT property names for parsing nodes   Tom Rini
• [PATCH] env: sf: report malloc error to caller   Tom Rini
• [PATCH] video: Support VIDEO_X2R10G10B10 in truetype console   Tom Rini
• [PATCH] video: console: Fix buffer overflow in cmd 'font list'   Tom Rini
• [PATCH] tools: buildman: fix non-existing SafeConfigParser in Python 3.12+   Tom Rini
• [ANN] U-Boot v2024.04-rc1 released   Tom Rini
• [PATCH v3] board: phytec: phycore-imx93: Add phyBOARD-Segin-i.MX93 support   Tom Rini
• [PATCH] dts: ast2600: add x4tf dts for asus product   Tom Rini
• [GIT PULL] Clock changes for v2024.04   Tom Rini
• [PATCH v4 00/11] An effort to bring DT bindings compliance within U-Boot   Tom Rini
• [PATCH 0/3] mux: Drop usage of "u-boot,mux-autoprobe"   Tom Rini
• [GIT PULL] u-boot-riscv/master   Tom Rini
• [PULL] u-boot-at91-2024.04-a   Tom Rini
• [PATCH v5 08/12] smbios: Drop support for SMBIOS2 tables   Peter Robinson
• [PATCH] mach-snapdragon: Move APQ8016 SoC derived board code   Peter Robinson
• [PATCH v1 1/1] cmd: bootmenu: rename U-Boot console to Exit   Peter Robinson
• [PATCH v2 2/4] cmd: provide command to display SMBIOS information   Peter Robinson
• [PATCH v2] net: mv88e6xxx: fix missing SMI address initialization   Stefan Roese
• [PATCH 1/2] arm: mvebu: clearfog gtr: add config option to select serdes0 interface   Stefan Roese
• [PATCH v3 1/3] arm: mvebu: Espressobin: move FDT fixup into a separate function   Stefan Roese
• [PATCH] arm: mvebu: AC5: Use finer grained memory map   Stefan Roese
• [PATCH v3 1/3] arm: mvebu: Espressobin: move FDT fixup into a separate function   Stefan Roese
• [PATCH v3 2/3] arm: mvebu: Espressobin: move network setup into a separate function   Stefan Roese
• [PATCH v3 3/3] arm: mvebu: eDPU: support new board revision   Stefan Roese
• Please pull u-boot-marvell/master   Stefan Roese
• [PATCH 3/3] arm: mvebu: helios-4: add defconfig for spi booting   Stefan Roese
• [PATCH v2 0/2] board: solidrun: clearfog gtr: add serdes configuration   Stefan Roese
• Please pull u-boot-marvell/master   Stefan Roese
• [PATCH V4 2/2] configs: andes: add watchdog support fot andes ae350   Stefan Roese
• [PATCH v3 0/3] Conclusive WHLE-LS1 support (was: Conclusive WHLE-LS1046A support)   Artur Rojek
• [PATCH v1] fastboot: introduce 'oem board' subcommand   Alexey Romanov
• [PATCH v2] android_ab: don't ignore ab_control_store return code   Alexey Romanov
• [PATCH v2 00/14] Support SPI NAND in fastboot protocol   Alexey Romanov
• [PATCH v2 01/14] nand: move NAND initialization API to nand/core.c   Alexey Romanov
• [PATCH v2 02/14] nand: don't overwrite mtd name in nand_register()   Alexey Romanov
• [PATCH v2 03/14] nand: move nand_util.c to NAND core folder   Alexey Romanov
• [PATCH v2 04/14] nand: move nand_erase_opts() to core NAND folder   Alexey Romanov
• [PATCH v2 05/14] spi: add board_nand_init() function   Alexey Romanov
• [PATCH v2 06/14] spi: use nand_register() instead of add_mtd_device()   Alexey Romanov
• [PATCH v2 07/14] mtdparts: use negative error codes   Alexey Romanov
• [PATCH v2 08/14] mtdparts: use CMD_RET_FAILURE define   Alexey Romanov
• [PATCH v2 09/14] jffs2: use negative error codes   Alexey Romanov
• [PATCH v2 10/14] jffs2: use CMD_RET_FAILURE/SUCCESS defines   Alexey Romanov
• [PATCH v2 11/14] cmd: allow to enable CMD_NAND for SPI NAND devices   Alexey Romanov
• [PATCH v2 12/14] fastboot: check device type for SPI NAND too   Alexey Romanov
• [PATCH v2 13/14] fastboot: enable FASTBOOT_FLASH option for SPI NAND devices   Alexey Romanov
• [PATCH v2 14/14] fastboot: fb_nand: add missing newlines in pr_err() macro   Alexey Romanov
• [PATCH v1] fastboot: introduce 'oem board' subcommand   Alexey Romanov
• [PATCH v1] fastboot: introduce 'oem board' subcommand   Alexey Romanov
• [PATCH v1] fastboot: introduce 'oem board' subcommand   Alexey Romanov
• [PATCH v1] fastboot: introduce 'oem board' subcommand   Alexey Romanov
• [PATCH] sbp1: Add support for IBM SBP1 board   Patrick Rudolph
• [PATCH v6 0/6] Implement fastboot multiresponce   Svyatoslav Ryhel
• [PATCH v7 0/7] Implement fastboot multiresponce   Svyatoslav Ryhel
• [PATCH v7 1/7] fastboot: multiresponse support   Svyatoslav Ryhel
• [PATCH v7 2/7] fastboot: implement "getvar all"   Svyatoslav Ryhel
• [PATCH v7 3/7] common: console: introduce console_record_isempty helper   Svyatoslav Ryhel
• [PATCH v7 4/7] common: console: record console from the beginning   Svyatoslav Ryhel
• [PATCH v7 5/7] lib: membuff: fix readline not returning line in case of overflow   Svyatoslav Ryhel
• [PATCH v7 6/7] fastboot: add oem console command support   Svyatoslav Ryhel
• [PATCH v7 7/7] test: hush: dollar: fix bagous behavior   Svyatoslav Ryhel
• Please pull u-boot-tegra staging   Svyatoslav Ryhel
• [PATCH] boot: add support for button commands   Svyatoslav Ryhel
• [PATCH v2 0/9] Add T114 video support   Svyatoslav Ryhel
• [PATCH v2 1/9] video: tegra20: dc: diverge DC per-SOC   Svyatoslav Ryhel
• [PATCH v2 2/9] video: tegra20: consolidate DC header   Svyatoslav Ryhel
• [PATCH v2 3/9] video: tegra20: dc: pass DC id to internal devices   Svyatoslav Ryhel
• [PATCH v2 4/9] video: tegra20: dc: add PLLD2 parent support   Svyatoslav Ryhel
• [PATCH v2 5/9] video: tegra20: dc: add reset support   Svyatoslav Ryhel
• [PATCH v2 6/9] video: tegra20: dc: add powergate   Svyatoslav Ryhel
• [PATCH v2 7/9] video: tegra20: add MIPI calibration driver   Svyatoslav Ryhel
• [PATCH v2 8/9] video: tegra20: dsi: add T114 support   Svyatoslav Ryhel
• [PATCH v2 9/9] video: tegra20: dsi: add reset support   Svyatoslav Ryhel
• [PATCH v1 0/2] Simple panel improvements   Svyatoslav Ryhel
• [PATCH v1 1/2] video: simple_panel: simplify platform data pass   Svyatoslav Ryhel
• [PATCH v1 2/2] video: simple_panel: add EDID support   Svyatoslav Ryhel
• [PATCH v3 00/10] Add T114 video support   Svyatoslav Ryhel
• [PATCH v3 01/10] video: tegra20: dc: diverge DC per-SOC   Svyatoslav Ryhel
• [PATCH v3 02/10] video: tegra20: dc: fix image shift on rotated panels   Svyatoslav Ryhel
• [PATCH v3 03/10] video: tegra20: consolidate DC header   Svyatoslav Ryhel
• [PATCH v3 04/10] video: tegra20: dc: pass DC id to internal devices   Svyatoslav Ryhel
• [PATCH v3 05/10] video: tegra20: dc: add PLLD2 parent support   Svyatoslav Ryhel
• [PATCH v3 06/10] video: tegra20: dc: add reset support   Svyatoslav Ryhel
• [PATCH v3 07/10] video: tegra20: dc: add powergate   Svyatoslav Ryhel
• [PATCH v3 08/10] video: tegra20: add MIPI calibration driver   Svyatoslav Ryhel
• [PATCH v3 09/10] video: tegra20: dsi: add T114 support   Svyatoslav Ryhel
• [PATCH v3 10/10] video: tegra20: dsi: add reset support   Svyatoslav Ryhel
• [PATCH v3 0/1] Fix clk-gpio driver   Svyatoslav Ryhel
• [PATCH v3 1/1] clk: clk-gpio: add actual gated clock   Svyatoslav Ryhel
• [PATCH v1 0/1] bootmenu: rename U-Boot console to Exit   Svyatoslav Ryhel
• [PATCH v1 1/1] cmd: bootmenu: rename U-Boot console to Exit   Svyatoslav Ryhel
• [PATCH v2 0/1] bootmenu: rename U-Boot console to Exit   Svyatoslav Ryhel
• [PATCH v2 1/1] cmd: bootmenu: rename U-Boot console to Exit   Svyatoslav Ryhel
• [PATCH v1 0/2] ARM: tegra: move to standard boot   Svyatoslav Ryhel
• [PATCH v1 1/2] ARM: tegra: move to standard boot   Svyatoslav Ryhel
• [PATCH v1 2/2] board: tegra30: switch to standard boot   Svyatoslav Ryhel
• [PATCH v4 00/13] Add T114 video support   Svyatoslav Ryhel
• [PATCH v4 01/13] video: tegra20: dc: diverge DC per-SOC   Svyatoslav Ryhel
• [PATCH v4 02/13] video: tegra20: dc: fix image shift on rotated panels   Svyatoslav Ryhel
• [PATCH v4 03/13] video: tegra20: consolidate DC header   Svyatoslav Ryhel
• [PATCH v4 04/13] video: tegra20: dc: pass DC id to internal devices   Svyatoslav Ryhel
• [PATCH v4 05/13] video: tegra20: dc: add PLLD2 parent support   Svyatoslav Ryhel
• [PATCH v4 06/13] video: tegra20: dc: add reset support   Svyatoslav Ryhel
• [PATCH v4 07/13] video: tegra20: dc: add powergate   Svyatoslav Ryhel
• [PATCH v4 08/13] video: tegra20: dc: fix the clock divider calculation if PLLD/D2 is used   Svyatoslav Ryhel
• [PATCH v4 09/13] video: tegra20: add MIPI calibration driver   Svyatoslav Ryhel
• [PATCH v4 10/13] video: tegra20: dsi: add T114 support   Svyatoslav Ryhel
• [PATCH v4 11/13] video: tegra20: dsi: add reset support   Svyatoslav Ryhel
• [PATCH v4 12/13] video: tegra20: dsi: remove pre-configuration   Svyatoslav Ryhel
• [PATCH v4 13/13] video: tegra20: dsi: set correct fifo depth   Svyatoslav Ryhel
• [PATCH v5 00/13] Add T114 video support   Svyatoslav Ryhel
• [PATCH v5 01/13] video: tegra20: dc: diverge DC per-SOC   Svyatoslav Ryhel
• [PATCH v5 02/13] video: tegra20: dc: fix image shift on rotated panels   Svyatoslav Ryhel
• [PATCH v5 03/13] video: tegra20: consolidate DC header   Svyatoslav Ryhel
• [PATCH v5 04/13] video: tegra20: dc: pass DC id to internal devices   Svyatoslav Ryhel
• [PATCH v5 05/13] video: tegra20: dc: add PLLD2 parent support   Svyatoslav Ryhel
• [PATCH v5 06/13] video: tegra20: dc: add reset support   Svyatoslav Ryhel
• [PATCH v5 07/13] video: tegra20: dc: add powergate   Svyatoslav Ryhel
• [PATCH v5 08/13] video: tegra20: dc: fix the clock divider calculation if PLLD/D2 is used   Svyatoslav Ryhel
• [PATCH v5 09/13] video: tegra20: add MIPI calibration driver   Svyatoslav Ryhel
• [PATCH v5 10/13] video: tegra20: dsi: add T114 support   Svyatoslav Ryhel
• [PATCH v5 11/13] video: tegra20: dsi: add reset support   Svyatoslav Ryhel
• [PATCH v5 12/13] video: tegra20: dsi: remove pre-configuration   Svyatoslav Ryhel
• [PATCH v5 13/13] video: tegra20: dsi: set correct fifo depth   Svyatoslav Ryhel
• [PATCH v6 00/18] Add T114 video support   Svyatoslav Ryhel
• [PATCH v6 01/18] video: tegra20: dc: diverge DC per-SOC   Svyatoslav Ryhel
• [PATCH v6 02/18] video: tegra20: dc: fix image shift on rotated panels   Svyatoslav Ryhel
• [PATCH v6 03/18] video: tegra20: consolidate DC header   Svyatoslav Ryhel
• [PATCH v6 04/18] video: tegra20: dc: pass DC id to internal devices   Svyatoslav Ryhel
• [PATCH v6 05/18] video: tegra20: dc: add PLLD2 parent support   Svyatoslav Ryhel
• [PATCH v6 06/18] video: tegra20: dc: add reset support   Svyatoslav Ryhel
• [PATCH v6 07/18] video: tegra20: dc: add powergate   Svyatoslav Ryhel
• [PATCH v6 08/18] video: tegra20: dc: configure behavior if PLLD/D2 is used   Svyatoslav Ryhel
• [PATCH v6 09/18] video: tegra20: dc: fix printing of framebuffer address   Svyatoslav Ryhel
• [PATCH v6 10/18] video: tegra20: dc: enable backlight after DC is configured   Svyatoslav Ryhel
• [PATCH v6 11/18] video: tegra20: dc: clean framebuffer memory block   Svyatoslav Ryhel
• [PATCH v6 12/18] video: tegra20: dc: parameterize V- and H-sync polarities   Svyatoslav Ryhel
• [PATCH v6 13/18] video: tegra20: add MIPI calibration driver   Svyatoslav Ryhel
• [PATCH v6 14/18] video: tegra20: dsi: add T114 support   Svyatoslav Ryhel
• [PATCH v6 15/18] video: tegra20: dsi: add reset support   Svyatoslav Ryhel
• [PATCH v6 16/18] video: tegra20: dsi: remove pre-configuration   Svyatoslav Ryhel
• [PATCH v6 17/18] video: tegra20: dsi: set correct fifo depth   Svyatoslav Ryhel
• [PATCH v6 18/18] video: tegra20: dsi: use set_backlight for backlight only   Svyatoslav Ryhel
• [PATCH v1 0/5] Tegra panel improvements   Svyatoslav Ryhel
• [PATCH v1 1/5] video: panel: add LG LG070WX3 MIPI DSI panel driver   Svyatoslav Ryhel
• [PATCH v1 2/5] video: panel: add Samsung LTL106HL02 MIPI DSI panel driver   Svyatoslav Ryhel
• [PATCH v1 3/5] video: endeavoru-panel: shift the init sequence by one step earlier   Svyatoslav Ryhel
• [PATCH v1 4/5] video: bridge: ssd2825: shift the init sequence by one step earlier   Svyatoslav Ryhel
• [PATCH v1 5/5] video: renesas: shift the init sequence by one step earlier   Svyatoslav Ryhel
• [PATCH v1 0/1] Fix booting kernels with ATAGS and extlinux   Svyatoslav Ryhel
• [PATCH v1 1/1] boot: pxe_utils: skip fdt setup in case legacy kernel is booted   Svyatoslav Ryhel
• [PATCH v2 0/1] Fix booting kernels with ATAGS and extlinux   Svyatoslav Ryhel
• [PATCH v2 1/1] boot: pxe_utils: skip fdt setup in case legacy kernel is booted   Svyatoslav Ryhel
• [PATCH v2 0/7] Tegra panel improvements   Svyatoslav Ryhel
• [PATCH v2 1/7] video: panel: add LG LG070WX3 MIPI DSI panel driver   Svyatoslav Ryhel
• [PATCH v2 2/7] video: panel: add Samsung LTL106HL02 MIPI DSI panel driver   Svyatoslav Ryhel
• [PATCH v2 3/7] video: bridge: add Toshiba TC358768 RGB to DSI bridge support   Svyatoslav Ryhel
• [PATCH v2 4/7] video: bridge: add basic support for the Parade DP501 transmitter   Svyatoslav Ryhel
• [PATCH v2 5/7] video: endeavoru-panel: shift the init sequence by one step earlier   Svyatoslav Ryhel
• [PATCH v2 6/7] video: bridge: ssd2825: shift the init sequence by one step earlier   Svyatoslav Ryhel
• [PATCH v2 7/7] video: renesas: shift the init sequence by one step earlier   Svyatoslav Ryhel
• FIELD_RETURN on i.MX8MNANOLPD4 EVK   Thomas Schaefer
• AW: FIELD_RETURN on i.MX8MNANOLPD4 EVK   Thomas Schaefer
• AW: [PATCH] arm: imx: imx8m: Enable the SError exception   Thomas Schaefer
• [PATCH v5 00/12] smbios: Deal with tables beyond 4GB   Heinrich Schuchardt
• [PATCH v5 12/12] efi: Correct smbios-table installation   Heinrich Schuchardt
• [PATCH 1/1] x86: all firmware tables must be paragraph aligned   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: provide tool to dump SMBIOS table   Heinrich Schuchardt
• [PATCH v5 04/12] smbios: Use SMBIOS 3.0 to support an address above 4GB   Heinrich Schuchardt
• [PATCH v2 9/2] efi_loader: provide tool to dump SMBIOS table   Heinrich Schuchardt
• [PATCH v2 1/2] smbios: smbios.h should not import ofnode.h   Heinrich Schuchardt
• [PATCH v2 2/2] efi_loader: provide tool to dump SMBIOS table   Heinrich Schuchardt
• [PATCH 1/1] x86: all firmware tables must be paragraph aligned   Heinrich Schuchardt
• [PATCH v2 1/1] x86: all firmware tables must be paragraph aligned   Heinrich Schuchardt
• [PATCH v2 2/2] efi_loader: provide tool to dump SMBIOS table   Heinrich Schuchardt
• [PATCH v3 0/2] efi_loader: provide tool to dump SMBIOS table   Heinrich Schuchardt
• [PATCH v3 1/2] smbios: smbios.h should not import ofnode.h   Heinrich Schuchardt
• [PATCH v3 2/2] efi_loader: provide tool to dump SMBIOS table   Heinrich Schuchardt
• Passing boot logs to Linux?   Heinrich Schuchardt
• [PATCH 1/1] mmc: Avoid buffer overrun in mmc_startup()   Heinrich Schuchardt
• [PATCH 1/1] net: phy: Fix signed shift overflow   Heinrich Schuchardt
• [PATCH 1/1] sandbox: missing return value checks in eth-raw-os   Heinrich Schuchardt
• [PATCH 1/1] boot: remove dead code in bootflow_check()   Heinrich Schuchardt
• [PATCH 1/1] boot: boot_flow_iter_set() called with uninitialized methods_flag   Heinrich Schuchardt
• [PATCH 1/1] boot: superfluous assignment in bootflow_menu_new()   Heinrich Schuchardt
• Adding EFI runtime support to the Arm's FF-A bus   Heinrich Schuchardt
• [PATCH v2 0/2] lib: smbios: verify_checksum() is duplicate   Heinrich Schuchardt
• [PATCH v2 1/2] lib: make table_compute_checksum() arguments const   Heinrich Schuchardt
• [PATCH v2 2/2] lib: smbios: verify_checksum() is duplicate   Heinrich Schuchardt
• Pull request rng-2024-04-rc1   Heinrich Schuchardt
• Pull request smbios-2024-04-rc1   Heinrich Schuchardt
• [PATCH v2 2/2] smbios: copy QEMU tables   Heinrich Schuchardt
• [PATCH v2 1/2] efi_loader: auto-generate boot option for each blkio device   Heinrich Schuchardt
• [PATCH 1/1] smbios: buffer overflow when zeroing entry point   Heinrich Schuchardt
• [PATCH 1/1] cmd: mtd: avoid unintentional integer overflow   Heinrich Schuchardt
• [PATCH 1/1] sandbox: move sandbox specifics to booti_setup()   Heinrich Schuchardt
• [PATCH 1/1] cmd: bootflow: remove dead code in do_bootflow_cmdline()   Heinrich Schuchardt
• [PATCH] cmd: efidebug: check pointer after memory allocation   Heinrich Schuchardt
• [PATCH 1/1] docker: build QEMU v8.2.0   Heinrich Schuchardt
• [PATCH v4 2/4] efi_loader: rename BOOTEFI_BOOTMGR to EFI_BOOTMGR   Heinrich Schuchardt
• [PATCH 0/5] doc: update requirements.txt   Heinrich Schuchardt
• [PATCH 1/5] docs/sphinx: Explicitly convert Sphinx paths to str   Heinrich Schuchardt
• [PATCH 2/5] doc: add sphinx_rtd_theme extension   Heinrich Schuchardt
• [PATCH 3/5] doc: update theme_overrides.css   Heinrich Schuchardt
• [PATCH 4/5] doc: import Sphinx theme.css and pygments.css   Heinrich Schuchardt
• [PATCH 5/5] doc: update requirements.txt   Heinrich Schuchardt
• [PATCH 1/1] doc: create index entries for commands   Heinrich Schuchardt
• [PATCH] doc: add generated index to table of contents   Heinrich Schuchardt
• Pull request efi-2024-04-rc1   Heinrich Schuchardt
• [PATCH v2 1/2] doc: add generated index to table of contents   Heinrich Schuchardt
• [PATCH v2 3/3] doc: sophgo: milkv_duo: document Milk-V Duo board   Heinrich Schuchardt
• [PATCH v2 1/3] riscv: sophgo: milkv_duo: initial support added   Heinrich Schuchardt
• [PATCH v4 2/4] efi_loader: rename BOOTEFI_BOOTMGR to EFI_BOOTMGR   Heinrich Schuchardt
• [PATCH 1/1] cmd: increase default for SYS_MAXARGS   Heinrich Schuchardt
• [PATCH v4 2/4] efi_loader: rename BOOTEFI_BOOTMGR to EFI_BOOTMGR   Heinrich Schuchardt
• [PATCH v2 2/2] spl: Add support for booting from ESP   Heinrich Schuchardt
• [PATCH v2 1/2] part: Add a function to find ESP partition   Heinrich Schuchardt
• [PATCH 1/1] part: correct documentation of part_get_bootable()   Heinrich Schuchardt
• [PATCH v2 1/2] part: Add a function to find ESP partition   Heinrich Schuchardt
• [PATCH v4 2/4] efi_loader: rename BOOTEFI_BOOTMGR to EFI_BOOTMGR   Heinrich Schuchardt
• [PATCH v5 0/4] cmd: bootefi: refactor the code for bootmgr   Heinrich Schuchardt
• Pull request efi-2024-04-rc1-2   Heinrich Schuchardt
• [PATCH v2 1/4] smbios: type2: contained object handles   Heinrich Schuchardt
• [PATCH v2 2/4] cmd: provide command to display SMBIOS information   Heinrich Schuchardt
• [PATCH v2 3/4] doc: man-page for smbios command   Heinrich Schuchardt
• [PATCH v2 4/4] test: unit test for smbios command   Heinrich Schuchardt
• [PATCH v2 0/4] cmd: provide command to display SMBIOS information   Heinrich Schuchardt
• [PATCH 1/1] cmd: sbi: add support for Debug Trigger Extension   Heinrich Schuchardt
• [PATCH v2 4/4] test: unit test for smbios command   Heinrich Schuchardt
• [PATCH v2 2/4] cmd: provide command to display SMBIOS information   Heinrich Schuchardt
• [PATCH RFC 0/6] video: Add UTF-8 support for UEFI applications   Heinrich Schuchardt
• [PATCH 1/1] lib: add comment in utf8_to_utf32_stream()   Heinrich Schuchardt
• [PATCH 1/1] test: enhance unicode_test_utf8_to_utf32_stream()   Heinrich Schuchardt
• [PATCH RFC 1/6] lib: charset: Fix utf8_to_utf32_stream() return value doc string   Heinrich Schuchardt
• [PATCH RFC 2/6] video: console: Parse UTF-8 character sequences   Heinrich Schuchardt
• [PATCH RFC 3/6] lib/charset: Map cp437 low chars (0x01 - 0x1f) from unicode   Heinrich Schuchardt
• [PATCH RFC 4/6] efi_selftest: Add international characters test   Heinrich Schuchardt
• Bootflows produce gibberish instead of readable output   Heinrich Schuchardt
• Fwd: New Defects reported by Coverity Scan for Das U-Boot   Heinrich Schuchardt
• ** CID 478334: Memory - corruptions (OVERRUN)   Heinrich Schuchardt
• [PATCH] doc: uefi: remove duplicate word "has"   Heinrich Schuchardt
• Pull request efi-2024-04-rc1-3   Heinrich Schuchardt
• [PATCH 1/1] acpi: rename aslc_id, aslc_revision   Heinrich Schuchardt
• [PATCH 1/1] MAINTAINERS: add include/acpi/ to ACPI   Heinrich Schuchardt
• [PATCH 1/1] acpi: document HETP table   Heinrich Schuchardt
• [PATCH 1/1] acpi: remove duplicate declaration of acpi_fill_header()   Heinrich Schuchardt
• ACPI Vendor ID Request   Heinrich Schuchardt
• [PATCH 1/1] lib: support SMBIOS3 table in uuid_guid_get_str()   Heinrich Schuchardt
• [PATCH] efi_loader : Suppress error print message   Heinrich Schuchardt
• [PATCH 1/1] mmc: Don't suggest to build modules in Kconfig.   Heinrich Schuchardt
• [PATCH] efi_loader : Suppress error print message   Heinrich Schuchardt
• [PATCH] efi_loader: migrate SMBIOS 3.0 entry point structure for measurement   Heinrich Schuchardt
• [PATCH] doc: dm: Fix typo   Heinrich Schuchardt
• [PATCH] efi_loader: migrate SMBIOS 3.0 entry point structure for measurement   Heinrich Schuchardt
• [PATCH 1/1] efi_selftest: add missing line feed in efi_selftest_miniapp_exit   Heinrich Schuchardt
• [PATCH 1/1] riscv: separate .data and .text sections of EFI binaries   Heinrich Schuchardt
• [PATCH v2 2/4] cmd: provide command to display SMBIOS information   Heinrich Schuchardt
• [PATCH v2 0/3] riscv: separate .data and .text sections of EFI binaries   Heinrich Schuchardt
• [PATCH v2 1/3] riscv: conflicting SPDX license linker scripts   Heinrich Schuchardt
• [PATCH v2 2/3] riscv: page align EFI binary section   Heinrich Schuchardt
• [PATCH v2 3/3] riscv: separate .data and .text sections of EFI binaries   Heinrich Schuchardt
• [PATCH 3/3] cmd: rng: Add rng list command   Heinrich Schuchardt
• [PATCH 2/3] driver: rng: Fix SMCCC TRNG crash   Heinrich Schuchardt
• [PATCH 1/3] firmware: psci: Fix bind_smccc_features psci check   Heinrich Schuchardt
• [PATCH v3 0/6] cmd: provide command to display SMBIOS information   Heinrich Schuchardt
• [PATCH v3 1/6] smbios: type2: contained object handles   Heinrich Schuchardt
• [PATCH v3 2/6] cmd: provide command to display SMBIOS information   Heinrich Schuchardt
• [PATCH v3 3/6] doc: man-page for smbios command   Heinrich Schuchardt
• [PATCH v3 4/6] test: unit test for smbios command   Heinrich Schuchardt
• [PATCH v3 5/6] configs: enable smbios command on sandbox   Heinrich Schuchardt
• [PATCH v3 6/6] configs: enable smbios command on qemu_arm64_defconfig   Heinrich Schuchardt
• [PATCH v3 5/6] configs: enable smbios command on sandbox   Heinrich Schuchardt
• [PATCH] smbios: use struct_table_length to get SMBIOS 2.1 total table length   Heinrich Schuchardt
• [PATCH] efi_loader: check efi_get_variable_int return value   Heinrich Schuchardt
• [PATCH 0/2] efi_loader: export efi_get_configuration_table   Heinrich Schuchardt
• [PATCH 1/2] efi_loader: export efi_get_configuration_table   Heinrich Schuchardt
• [PATCH 2/2] cmd: in do_efi_capsule_esrt use efi_get_configuration_table   Heinrich Schuchardt
• [PATCH v2] efi_loader: migrate SMBIOS 3.0 entry point structure for measurement   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: replace find_smbios_table by library function   Heinrich Schuchardt
• [PATCH] efi_loader: check efi_get_variable_int return value   Heinrich Schuchardt
• [PATCH 2/3] driver: rng: Fix SMCCC TRNG crash   Heinrich Schuchardt
• Pull request smbios-2024-04-rc1-2   Heinrich Schuchardt
• Fwd: New Defects reported by Coverity Scan for Das U-Boot   Heinrich Schuchardt
• [PATCH 1/1] common: event: check event_type_name() argument   Heinrich Schuchardt
• [PATCH] image-host: Fix error value paths and emit error messages to stderr.   Heinrich Schuchardt
• Fwd: New Defects reported by Coverity Scan for Das U-Boot   Heinrich Schuchardt
• [PATCH v4 3/3] doc: sophgo: milkv_duo: document Milk-V Duo board   Heinrich Schuchardt
• [PATCH] efi_loader : Suppress error print message   Heinrich Schuchardt
• [PATCH 1/1] lib: smbios_entr() use logical or for booleans   Heinrich Schuchardt
• [PATCH] efi_loader : Suppress error print message   Heinrich Schuchardt
• [PATCH 1/1] smbios: get_str_from_dt() - add sysinfo_id description   Heinrich Schuchardt
• [PATCH 0/7] smbios: missing strings, RISC-V processor ID   Heinrich Schuchardt
• [PATCH 1/7] cmd: smbios: always use '0x%04x' for printing handles   Heinrich Schuchardt
• [PATCH 2/7] cmd: smbios: add missing colon after UUID   Heinrich Schuchardt
• [PATCH 3/7] cmd: smbios: replace missing string by 'Not Specified'   Heinrich Schuchardt
• [PATCH 4/7] smbios: string table always needs two terminating NUL bytes   Heinrich Schuchardt
• [PATCH 5/7] smbios: if a string value is unknown, use string number 0   Heinrich Schuchardt
• [PATCH 6/7] smbios: provide type 4 RISC-V SMBIOS Processor ID   Heinrich Schuchardt
• [PATCH 7/7] smbios: correctly fill chassis handle   Heinrich Schuchardt
• Pull request efi-2024-04-rc1-4   Heinrich Schuchardt
• Fwd: New Defects reported by Coverity Scan for Das U-Boot   Heinrich Schuchardt
• [PATCH v2 1/3] firmware: psci: Fix bind_smccc_features psci check   Heinrich Schuchardt
• [PATCH v2 3/3] cmd: rng: Add rng list command   Heinrich Schuchardt
• [PATCH 4/7] smbios: string table always needs two terminating NUL bytes   Heinrich Schuchardt
• [PATCH v2] smbios: Fix table when no string is present   Heinrich Schuchardt
• [PATCH v3 0/6] rockchip: add vendor-wide support for detecting U-Boot proper boot medium   Quentin Schulz
• [PATCH v3 1/6] rockchip: rk3399: simplify logic for getting SPL boot medium DT node   Quentin Schulz
• [PATCH v3 2/6] rockchip: px30: simplify logic for getting SPL boot medium DT node   Quentin Schulz
• [PATCH v3 3/6] rockchip: factor out spl_perform_fixups into common spl-boot-order   Quentin Schulz
• [PATCH v3 4/6] rockchip: find U-boot proper boot device by inverting the logic that sets it   Quentin Schulz
• [PATCH v3 5/6] rockchip: remove unused global data ptr   Quentin Schulz
• [PATCH v3 6/6] rockchip: rk3128: remove noop file   Quentin Schulz
• [PATCH v3 0/6] rockchip: puma-rk3399/ringneck-px30: fix check against value in default environment variable   Quentin Schulz
• [PATCH v3 1/6] rockchip: ringneck-px30: do not hardcode MMC controller paths   Quentin Schulz
• [PATCH v3 2/6] rockchip: puma-rk3399: do not hardcode MMC controller paths   Quentin Schulz
• [PATCH v3 3/6] rockchip: ringneck-px30/puma-rk3399: factor out storage medium selection   Quentin Schulz
• [PATCH v3 4/6] env: allow to copy value from default environment into a buffer   Quentin Schulz
• [PATCH v3 5/6] env: migrate env_get_default to call env_get_default_into   Quentin Schulz
• [PATCH v3 6/6] rockchip: theobroma-systems: fix modified boot_targets detection   Quentin Schulz
• [PATCH v4 0/6] rockchip: puma-rk3399/ringneck-px30: fix check against value in default environment variable   Quentin Schulz
• [PATCH v4 1/6] rockchip: ringneck-px30: do not hardcode MMC controller paths   Quentin Schulz
• [PATCH v4 2/6] rockchip: puma-rk3399: do not hardcode MMC controller paths   Quentin Schulz
• [PATCH v4 3/6] rockchip: ringneck-px30/puma-rk3399: factor out storage medium selection   Quentin Schulz
• [PATCH v4 4/6] env: allow to copy value from default environment into a buffer   Quentin Schulz
• [PATCH v4 5/6] env: migrate env_get_default to call env_get_default_into   Quentin Schulz
• [PATCH v4 6/6] rockchip: theobroma-systems: fix modified boot_targets detection   Quentin Schulz
• [PATCH v4 0/6] rockchip: add vendor-wide support for detecting U-Boot proper boot medium   Quentin Schulz
• [PATCH v4 1/6] rockchip: rk3399: simplify logic for getting SPL boot medium DT node   Quentin Schulz
• [PATCH v4 2/6] rockchip: px30: simplify logic for getting SPL boot medium DT node   Quentin Schulz
• [PATCH v4 3/6] rockchip: factor out spl_perform_fixups into common spl-boot-order   Quentin Schulz
• [PATCH v4 4/6] rockchip: find U-boot proper boot device by inverting the logic that sets it   Quentin Schulz
• [PATCH v4 5/6] rockchip: remove unused global data ptr   Quentin Schulz
• [PATCH v4 6/6] rockchip: rk3128: remove noop file   Quentin Schulz
• [PATCH v5 0/6] rockchip: add vendor-wide support for detecting U-Boot proper boot medium   Quentin Schulz
• [PATCH v5 1/6] rockchip: rk3399: simplify logic for getting SPL boot medium DT node   Quentin Schulz
• [PATCH v5 2/6] rockchip: px30: simplify logic for getting SPL boot medium DT node   Quentin Schulz
• [PATCH v5 3/6] rockchip: factor out spl_perform_fixups into common spl-boot-order   Quentin Schulz
• [PATCH v5 4/6] rockchip: find U-boot proper boot device by inverting the logic that sets it   Quentin Schulz
• [PATCH v5 5/6] rockchip: remove unused global data ptr   Quentin Schulz
• [PATCH v5 6/6] rockchip: rk3128: remove noop file   Quentin Schulz
• [PATCH v3 4/6] rockchip: find U-boot proper boot device by inverting the logic that sets it   Quentin Schulz
• [PATCH 00/18] rockchip: add support for Theobroma JAGUAR SBC-RK3588-AMR   Quentin Schulz
• [PATCH 01/18] rockchip: rk3588: use mainline pmu-grf compatible   Quentin Schulz
• [PATCH 02/18] rockchip: rk3588: sync rk3588s dtsi from v6.8-rc1   Quentin Schulz
• [PATCH 03/18] rockchip: avoid out-of-bounds when computing cpuid   Quentin Schulz
• [PATCH 04/18] rockchip: add weak function symbol called at the beginning of misc_init_r   Quentin Schulz
• [PATCH 05/18] rockchip: google: gru: migrate to rockchip_early_misc_init_r   Quentin Schulz
• [PATCH 06/18] rockchip: pine64: pinebook: migrate to rockchip_early_misc_init_r   Quentin Schulz
• [PATCH 07/18] rockchip: pine64: pinephone: migrate to rockchip_early_misc_init_r   Quentin Schulz
• [PATCH 08/18] rockchip: pine64: rockpro64: migrate to rockchip_early_misc_init_r   Quentin Schulz
• [PATCH 09/18] rockchip: theobroma-systems: puma: migrate to rockchip_early_misc_init_r   Quentin Schulz
• [PATCH 10/18] rockchip: theobroma-systems: ringneck: migrate to rockchip_early_misc_init_r   Quentin Schulz
• [PATCH 11/18] rockchip: merge misc.c into board.c   Quentin Schulz
• [PATCH 12/18] rockchip: transform rockchip_capsule_update_board_setup into a weak function symbol   Quentin Schulz
• [PATCH 13/18] rockchip: rk3588: fix non-working SD controller if booting from other media   Quentin Schulz
• [PATCH 14/18] rockchip: rk3588: add constants for some register address spaces   Quentin Schulz
• [PATCH 15/18] rockchip: migrate hardware.h inclusion into appropriate files   Quentin Schulz
• [PATCH 16/18] rockchip: include asm/io.h directly in asm/arch-rockchip/hardware.h   Quentin Schulz
• [PATCH 17/18] rockchip: rk3588: bind MMC controllers in U-Boot proper pre-reloc   Quentin Schulz
• [PATCH 18/18] board: rockchip: add Theobroma-Systems RK3588 Jaguar SBC   Quentin Schulz
• [PATCH] tools: buildman: fix non-existing SafeConfigParser in Python 3.12+   Quentin Schulz
• [PATCH 18/18] board: rockchip: add Theobroma-Systems RK3588 Jaguar SBC   Quentin Schulz
• [PATCH v3 4/6] rockchip: find U-boot proper boot device by inverting the logic that sets it   Quentin Schulz
• [PATCH 13/18] rockchip: rk3588: fix non-working SD controller if booting from other media   Quentin Schulz
• [PATCH 17/18] rockchip: rk3588: bind MMC controllers in U-Boot proper pre-reloc   Quentin Schulz
• [PATCH 15/18] rockchip: migrate hardware.h inclusion into appropriate files   Quentin Schulz
• [PATCH 13/18] rockchip: rk3588: fix non-working SD controller if booting from other media   Quentin Schulz
• [PATCH 17/18] rockchip: rk3588: bind MMC controllers in U-Boot proper pre-reloc   Quentin Schulz
• [PATCH 13/18] rockchip: rk3588: fix non-working SD controller if booting from other media   Quentin Schulz
• [PATCH 13/18] rockchip: rk3588: fix non-working SD controller if booting from other media   Quentin Schulz
• [PATCH 13/18] rockchip: rk3588: fix non-working SD controller if booting from other media   Quentin Schulz
• [PATCH 13/18] rockchip: rk3588: fix non-working SD controller if booting from other media   Quentin Schulz
• [PATCH 17/18] rockchip: rk3588: bind MMC controllers in U-Boot proper pre-reloc   Quentin Schulz
• [PATCH 17/18] rockchip: rk3588: bind MMC controllers in U-Boot proper pre-reloc   Quentin Schulz
• [PATCH v7 00/17] Introduce initial TI's J784S4 and AM69 support   Enric Balletbo i Serra
• booti usage offset requirements for compressed kernel and initrd with dtb   E Shattow
• booti usage offset requirements for compressed kernel and initrd with dtb   E Shattow
• riscv defconfig starfive visionfive2 env is nowhere, missing axp15060 regulator, misc vendor hacks for Milk-V Mars CM Lite   E Shattow
• riscv defconfig starfive visionfive2 env is nowhere, missing axp15060 regulator, misc vendor hacks for Milk-V Mars CM Lite   E Shattow
• [PATCH] board: rockchip: Add support for FriendlyARM NanoPi R2C Plus   Tianling Shen
• [PATCH 08/16] edison: Remove empty config header   Andy Shevchenko
• [PATCH] env: sf: report malloc error to caller   Ralph Siemsen
• [PATCH 1/9] microblaze: dts: Use the normal build rule   Michal Simek
• [PATCH 1/9] microblaze: dts: Use the normal build rule   Michal Simek
• [PATCH v4 6/9] arm: Get bloblist from boot arguments   Michal Simek
• [PATCH v4 7/9] bloblist: Load the bloblist from the previous loader   Michal Simek
• [PATCH v3 0/8] An effort to bring DT bindings compliance within U-Boot   Michal Simek
• [PATCH] xilinx: Enable the NFS command by default   Michal Simek
• [PATCH v4 6/9] arm: Get bloblist from boot arguments   Michal Simek
• [PATCH] arm64: zynqmp: Describe ethernet phy on kd240   Michal Simek
• [PATCH] arm64: zynqmp: Fix i2c bus for kd240   Michal Simek
• [PATCH] arm64: zynqmp: Generate dfu_alt_info based on multiboot register   Michal Simek
• [PATCH 0/4] arm64: zymqmp: DT alignments   Michal Simek
• [PATCH] arm64: zynqmp: Rename zynqmp-power node to power-management   Michal Simek
• [PATCH v3 5/8] doc: devicetree: Updates for devicetree-rebasing subtree   Michal Simek
• [PATCH] arm64: zynqmp: Match dwc3 interrupts description with values   Michal Simek
• [PATCH v3 0/8] An effort to bring DT bindings compliance within U-Boot   Michal Simek
• [PATCH] cmd: sf: Fix sf probe crash   Michal Simek
• [PATCH] cmd: sf: Fix sf probe crash   Michal Simek
• [PATCH v2] xilinx: Enable the NFS command by default   Michal Simek
• [PATCH] cmd: sf: Fix sf probe crash   Michal Simek
• [PATCH v3 5/8] doc: devicetree: Updates for devicetree-rebasing subtree   Michal Simek
• [PATCH v3 5/8] doc: devicetree: Updates for devicetree-rebasing subtree   Michal Simek
• [PATCH v3 5/8] doc: devicetree: Updates for devicetree-rebasing subtree   Michal Simek
• [PATCH] arm64: zynqmp: Add support for new power-management node name   Michal Simek
• [PATCH] arm64: zynqmp: Replace '-' by '_' in fixed clock nodes   Michal Simek
• [PATCH] arm64: xilinx: Remove multiple blank lines from DTSes   Michal Simek
• [PATCH] arm64: zynqmp: Describe interrupt by using macro (OCM)   Michal Simek
• [PATCH] arm64: zynqmp: Update the i2c0 node for zcu1285   Michal Simek
• [PATCH] arm64: zynqmp: Match dwc3 interrupts description with values   Michal Simek
• [PATCH] arm64: zynqmp: Add missing description for efuse aeskey/pufuser   Michal Simek
• [PATCH] arm64: zynqmp: Match dwc3 interrupts description with values   Michal Simek
• [PATCH] xilinx: r5: Include the sys_r5_proto.h header for future use   Michal Simek
• [PATCH 1/4] tools: zynqmpimage: show info on partition 0   Michal Simek
• [PATCH] arm64: zynqmp: Remove ltc2954 node   Michal Simek
• [PATCH] arm64: xilinx: Move address/size-cells to proper locations   Michal Simek
• [PATCH] arm64: xilinx: Move address/size-cells to proper locations   Michal Simek
• [PATCH] usb: dwc3: Integrate usb5744 & usb2244 driver support   Michal Simek
• [PATCH] arm64: xilinx: Move address/size-cells to proper locations   Michal Simek
• [PATCH] arm64: xilinx: Move address/size-cells to proper locations   Michal Simek
• [PATCH] arm64: xilinx: Move address/size-cells to proper locations   Michal Simek
• [PATCH] arm64: zynqmp: Start TPM automatically via preboot on Kria   Michal Simek
• [PATCH v2] xilinx: r5: Include the sys_r5_proto.h header for future use   Michal Simek
• [PATCH 1/2] xilinx: board: Update the kaslr-seed property   Michal Simek
• [PATCH] arm64: zynqmp: Match dwc3 interrupts description with values   Michal Simek
• [PATCH] arm64: zynqmp: Rename zynqmp-power node to power-management   Michal Simek
• [PATCH] arm64: zynqmp: Add support for new power-management node name   Michal Simek
• [PATCH] arm64: zynqmp: Replace '-' by '_' in fixed clock nodes   Michal Simek
• [PATCH] arm64: xilinx: Remove multiple blank lines from DTSes   Michal Simek
• [PATCH] arm64: zynqmp: Describe interrupt by using macro (OCM)   Michal Simek
• [PATCH] arm64: zynqmp: Update the i2c0 node for zcu1285   Michal Simek
• [PATCH] arm64: zynqmp: Add missing description for efuse aeskey/pufuser   Michal Simek
• [PATCH] arm64: zynqmp: Start TPM automatically via preboot on Kria   Michal Simek
• [PATCH v2 1/2] xilinx: board: Update the kaslr-seed property   Michal Simek
• [PATCH v3 0/2] xilinx: Update the kaslr-seed property   Michal Simek
• [PATCH] arm64: zynqmp: Remove ltc2954 node   Michal Simek
• [GIT PULL] xilinx patches for v2024.04-rc1-v2   Michal Simek
• [UBOOT PATCH v4] test/py: net: Add dhcp abort test   Michal Simek
• [PATCH 02/16] xilinx_mbv: Remove empty config header   Michal Simek
• [PATCH 02/16] xilinx_mbv: Remove empty config header   Michal Simek
• [PATCH] arm64: xilinx: Enable EFI_HTTP_BOOT by default   Michal Simek
• [PATCH] arm64: zynqmp: Add 'silabs, skip-recall' to all si570 clk nodes   Michal Simek
• [PATCH v2] mtd: nand: arasan: Print warning for unsupported ecc modes   Michal Simek
• [PATCH v4 00/11] An effort to bring DT bindings compliance within U-Boot   Michal Simek
• [PATCH] arm64: zynqmp: Sync clock labels with kr260 revB   Michal Simek
• [PATCH 00/18] FWU: Migrate FWU metadata to version 2   Michal Simek
• [PATCH] arm64: zynqmp: Describe 25MHz fixed clock for PL GEMs   Michal Simek
• [PATCH] efi_loader : Suppress error print message   Michal Simek
• [PATCH] arm64: zynqmp: Fix kr260 clock wiring   Michal Simek
• [PATCH 1/1] mmc: Avoid buffer overrun in mmc_startup()   Dragan Simic
• [resend PATCH] bootdev: avoid infinite probe loop   Dragan Simic
• [PATCH] iommu: dont fail silently   Dragan Simic
• [PATCH] iommu: dont fail silently   Dragan Simic
• [PATCH] iommu: dont fail silently   Dragan Simic
• [PATCH] iommu: dont fail silently   Dragan Simic
• [PATCH 2/2] coreboot: Switch to a monospaced font   Dragan Simic
• [PATCH 0/1] Skip cleanup test if not built out of tree   Dragan Simic
• [PATCH v2] boot: add support for button commands   Dragan Simic
• [PATCH v2] boot: add support for button commands   Dragan Simic
• [PATCH v2] boot: add support for button commands   Dragan Simic
• [PATCH v2] boot: add support for button commands   Dragan Simic
• [PATCH 13/18] rockchip: rk3588: fix non-working SD controller if booting from other media   Dragan Simic
• [PATCH 13/18] rockchip: rk3588: fix non-working SD controller if booting from other media   Dragan Simic
• [PATCH 13/18] rockchip: rk3588: fix non-working SD controller if booting from other media   Dragan Simic
• [PATCH 13/18] rockchip: rk3588: fix non-working SD controller if booting from other media   Dragan Simic
• [PATCH v4 0/7] Add DFU and usb boot for TI am62x SK and beagleplay   Sjoerd Simons
• [PATCH v4 1/7] usb: dwc3: Add dwc3 glue driver for am62   Sjoerd Simons
• [PATCH v4 2/7] usb: dwc3: Switch to device mode on gadget start   Sjoerd Simons
• [PATCH v4 3/7] board: ti: am62x: am62x: include env for DFU   Sjoerd Simons
• [PATCH v4 4/7] arm: dts: k3-am625-sk: Enable usb port in u-boot   Sjoerd Simons
• [PATCH v4 5/7] configs: am62x_evm_*: Enable USB and DFU support   Sjoerd Simons
• [PATCH v4 6/7] beagleplay: Add DFU support   Sjoerd Simons
• [PATCH v4 7/7] doc: board: Add document for DFU boot on am62x SoCs   Sjoerd Simons
• [PATCH v4 5/7] configs: am62x_evm_*: Enable USB and DFU support   Sjoerd Simons
• [PATCH v4 6/7] beagleplay: Add DFU support   Sjoerd Simons
• [PATCH v4 2/7] usb: dwc3: Switch to device mode on gadget start   Sjoerd Simons
• [PATCH v4 7/7] doc: board: Add document for DFU boot on am62x SoCs   Sjoerd Simons
• [PATCH v4 5/7] configs: am62x_evm_*: Enable USB and DFU support   Sjoerd Simons
• [PATCH v4 2/7] usb: dwc3: Switch to device mode on gadget start   Sjoerd Simons
• [PATCH v4 5/7] configs: am62x_evm_*: Enable USB and DFU support   Sjoerd Simons
• [PATCH v4 5/7] configs: am62x_evm_*: Enable USB and DFU support   Sjoerd Simons
• [PATCH v4 4/7] arm: dts: k3-am625-sk: Enable usb port in u-boot   Sjoerd Simons
• [PATCH v1 1/1] net: ti: am65-cpsw-nuss: Remove incorrect RGMII_ID bit functionality   Ken Sloat
• [PATCH v1 1/1] net: ti: am65-cpsw-nuss: Remove incorrect RGMII_ID bit functionality   Ken Sloat
• [PATCH] Add XMC XM25QH128C/XM25QH256C/XM25QU256C/XM25QH512C/XM25QU512C site: https://www.xmcwh.com/site/product   Ssunk
• [PATCH] mtd: spinand: Add support for XTX XT26xxxDxxxxx   Bruce Sun
• [PATCH v4 2/6] siemens: eeprom: simplify setup & read   Sverdlin, Alexander
• [PATCH v7 7/7] test: hush: dollar: fix bagous behavior   Svyatoslav
• [PATCH v2 1/1] clk: clk-gpio: add actual gated clock   Svyatoslav
• [PATCH v1 1/1] cmd: bootmenu: rename U-Boot console to Exit   Svyatoslav
• [PATCH v1 0/1] Fix booting kernels with ATAGS and extlinux   Svyatoslav
• [PATCH v1 0/1] Fix booting kernels with ATAGS and extlinux   Svyatoslav
• [PATCH v1 0/1] Fix booting kernels with ATAGS and extlinux   Svyatoslav
• [PATCH v1 0/1] Fix booting kernels with ATAGS and extlinux   Svyatoslav
• [PATCH] doc: fix three-dash references in reStructuredText   Grzegorz Szymaszek
• [PATCH v1 1/2] imx: imxrt1050-evk: Add support for SPI flash booting   Jesse T
• [PATCH v4 0/4] cmd: bootefi: refactor the code for bootmgr   AKASHI Takahiro
• [PATCH v4 1/4] efi_loader: split unrelated code from efi_bootmgr.c   AKASHI Takahiro
• [PATCH v4 2/4] efi_loader: rename BOOTEFI_BOOTMGR to EFI_BOOTMGR   AKASHI Takahiro
• [PATCH v4 3/4] net: tftp: remove explicit efi configuration dependency   AKASHI Takahiro
• [PATCH v4 4/4] fs: remove explicit efi configuration dependency   AKASHI Takahiro
• [PATCH v4 2/4] efi_loader: rename BOOTEFI_BOOTMGR to EFI_BOOTMGR   AKASHI Takahiro
• [PATCH v4 2/4] efi_loader: rename BOOTEFI_BOOTMGR to EFI_BOOTMGR   AKASHI Takahiro
• [PATCH v4 2/4] efi_loader: rename BOOTEFI_BOOTMGR to EFI_BOOTMGR   AKASHI Takahiro
• [PATCH v4 2/4] efi_loader: rename BOOTEFI_BOOTMGR to EFI_BOOTMGR   AKASHI Takahiro
• [PATCH v5 0/4] cmd: bootefi: refactor the code for bootmgr   AKASHI Takahiro
• [PATCH v5 1/4] efi_loader: split unrelated code from efi_bootmgr.c   AKASHI Takahiro
• [PATCH v5 2/4] efi_loader: rename BOOTEFI_BOOTMGR to EFI_BOOTMGR   AKASHI Takahiro
• [PATCH v5 3/4] net: tftp: remove explicit efi configuration dependency   AKASHI Takahiro
• [PATCH v5 4/4] fs: remove explicit efi configuration dependency   AKASHI Takahiro
• [PATCH v1] tools: mkimage: Add support for i.MXRT FlexSPI Header   Jesse Taube
• [PATCH v1 1/2] imx: imxrt1050-evk: Add support for SPI flash booting   Jesse Taube
• [PATCH v1 2/2] imx: imxrt1050-evk: Add documentation for SPI boot   Jesse Taube
• [PATCH v2 02/17] video: dw_hdmi: Add Vendor PHY handling   Jagan Teki
• [PATCH V6 00/10] Update SPL splashscreen framework for AM62x   Jagan Teki
• [PATCH v3 00/17] video: dw_hdmi: Support Vendor PHY   Jagan Teki
• [PATCH v3 01/17] video: rockchip: hdmi: Detect hpd after controller init   Jagan Teki
• [PATCH v3 02/17] video: dw_hdmi: Add Vendor PHY handling   Jagan Teki
• [PATCH v3 03/17] video: dw_hdmi: Extend the HPD detection   Jagan Teki
• [PATCH v3 04/17] video: dw_hdmi: Add read_hpd hook   Jagan Teki
• [PATCH v3 05/17] video: dw_hdmi: Add setup_hpd hook   Jagan Teki
• [PATCH v3 06/17] video: rockchip: vop: Simplify rkvop_enable   Jagan Teki
• [PATCH v3 07/17] video: rockchip: vop: Add win offset support   Jagan Teki
• [PATCH v3 08/17] video: rockchip: vop: Add dsp offset support   Jagan Teki
• [PATCH v3 09/17] clk: rockchip: rk3328: Add VOP clk support   Jagan Teki
• [PATCH v3 10/17] clk: rk3328: Add get hdmiphy clock   Jagan Teki
• [PATCH v3 11/17] phy: rockchip: Add Rockchip INNO HDMI PHY driver   Jagan Teki
• [PATCH v3 12/17] video: rockchip: Add rk3328 hdmi support   Jagan Teki
• [PATCH v3 13/17] video: rockchip: Add rk3328 vop support   Jagan Teki
• [PATCH v3 14/17] ARM: dts: rk3328: Enable VOP for bootph-all   Jagan Teki
• [PATCH v3 15/17] rockchip: Enable preconsole for rk3328   Jagan Teki
• [PATCH v3 16/17] configs: evb-rk3328: Enable vidconsole for rk3328   Jagan Teki
• [PATCH v3 17/17] configs: Enable HDMI Out for ROC-RK3328-CC   Jagan Teki
• Black and White Artifact on BMP (24BPP) logo during boot   Jagan Teki
• Black and White Artifact on BMP (24BPP) logo during boot   Jagan Teki
• [PATCH v2] spi: dw: add check for Rx FIFO overflow   Jagan Teki
• [PATCH v2 07/11] mtd: spi: renesas: Add R8A779H0 V4M support   Jagan Teki
• [PATCH] mtd: spi-nor: ids: Add is25lx512 chip   Jagan Teki
• [PATCH] mtd: spinand: Add support for XTX XT26xxxDxxxxx   Jagan Teki
• [PATCH v2] spi: cadence_qspi: Address the comparison failure for 0-8 bytes of data   Jagan Teki
• [PATCH] Add XMC XM25QH128C/XM25QH256C/XM25QU256C/XM25QH512C/XM25QU512C site: https://www.xmcwh.com/site/product   Jagan Teki
• [PATCH v2 1/9] mtd: spi-nor-core: Clean up macros for Infineon(Cypress) S25 and S28   Jagan Teki
• [PATCH v2 2/9] mtd: spi-nor-core: Consolidate non-uniform erase helpers for S25 and S28   Jagan Teki
• [PATCH v2 3/9] mtd: spi-nor-core: Rework spansion_read_any_reg() to support Octal DTR mode   Jagan Teki
• [PATCH v2 4/9] mtd: spi-nor-core: Use CLPEF(0x82) as alternative to CLSR(0x30) for S25 and S28   Jagan Teki
• [PATCH v2 5/9] mtd: spi-nor-core: Rework s25_mdp_ready() to support Octal DTR mode   Jagan Teki
• [PATCH v2 6/9] mtd: spi-nor-core: Consolidate setup() hook for Infineon(Cypress) S25 and S28   Jagan Teki
• [PATCH v2 7/9] mtd: spi-nor-core: Consolidate post_bfpt_fixup() for Infineon(Cypress) S25 and S28   Jagan Teki
• [PATCH v2 8/9] mtd: spi-nor-core: Rework spi_nor_cypress_octal_dtr_enable()   Jagan Teki
• [PATCH v2 9/9] mtd: spi-nor-ids: Add Infineon(Cypress) s28hs02gt ID   Jagan Teki
• [PATCH v2 01/30] mtd: spi-nor: Add config to enable flash DTR   Jagan Teki
• [PATCH v2 00/30] Fix issues with QSPI and OSPI compare failures   Jagan Teki
• [PATCH v2 07/11] mtd: spi: renesas: Add R8A779H0 V4M support   Jagan Teki
• [PATCH v2 07/11] mtd: spi: renesas: Add R8A779H0 V4M support   Jagan Teki
• Pull request: u-boot-spi/master   Jagan Teki
• [PATCH 0/2] board: visionfive2: add pad drive strength config   Lukasz Tekieli
• [PATCH 1/2] net: phy: motorcomm: configure pad drive strength register   Lukasz Tekieli
• [PATCH 2/2] board: visionfive2: configure PHY pad drive strength   Lukasz Tekieli
• [PATCH v5 0/8] Move framebuffer reservation for SPL to RAM end   Devarsh Thakkar
• [PATCH] common: splash_source: Don't compile ubifs splash cmd for SPL build   Devarsh Thakkar
• [PATCH v2] common: splash_source: Don't compile ubifs splash cmd for SPL build   Devarsh Thakkar
• [PATCH] video: tidss: Use DT property names for parsing nodes   Devarsh Thakkar
• [PATCH v2] common: splash_source: Don't compile ubifs splash cmd for SPL build   Devarsh Thakkar
• [PATCH] video: tidss: Use DT property names for parsing nodes   Devarsh Thakkar
• [PATCH v5 0/8] Move framebuffer reservation for SPL to RAM end   Devarsh Thakkar
• [RFC PATCH] net: wget: Take in account tcp sequence number wrap around   Michael Trimarchi
• [RFC PATCH V2] net: wget: Take in account tcp sequence number wrap around   Michael Trimarchi
• [PATCH v1 04/12] nand: move nand_erase_opts() to core NAND folder   Michael Nazzareno Trimarchi
• [PATCH v1 07/12] mtdparts: use negative error codes   Michael Nazzareno Trimarchi
• [PATCH] cmd: sf: Fix sf probe crash   Michael Nazzareno Trimarchi
• [PATCH] cmd: sf: Fix sf probe crash   Michael Nazzareno Trimarchi
• [PATCH] cmd: sf: Fix sf probe crash   Michael Nazzareno Trimarchi
• inconsistent wget behavior   Michael Nazzareno Trimarchi
• inconsistent wget behavior   Michael Nazzareno Trimarchi
• inconsistent wget behavior   Michael Nazzareno Trimarchi
• inconsistent wget behavior   Michael Nazzareno Trimarchi
• inconsistent wget behavior   Michael Nazzareno Trimarchi
• inconsistent wget behavior   Michael Nazzareno Trimarchi
• [PATCH v2] mtd: rawnand: Meson NAND controller support   Michael Nazzareno Trimarchi
• [PATCH v2] mtd: rawnand: Meson NAND controller support   Michael Nazzareno Trimarchi
• [PATCH v2 0/2] mtd: nand: omap_gpmc: Fix NAND for AM335x   Michael Nazzareno Trimarchi
• [PATCH v2 07/14] mtdparts: use negative error codes   Michael Nazzareno Trimarchi
• [PATCH v9 2/2] arm64: boot: Support Flat Image Tree   Chen-Yu Tsai
• [PATCH v9 2/2] arm64: boot: Support Flat Image Tree   Chen-Yu Tsai
• Proposal: FIT support for extension boards / overlays   Chen-Yu Tsai
• Proposal: FIT support for extension boards / overlays   Chen-Yu Tsai
• [PATHv11 00/43] net/lwip: add lwip library for the network stack   Maxim Uvarov
• [PATHv11 00/43] net/lwip: add lwip library for the network stack   Maxim Uvarov
• [PATHv11 00/43] net/lwip: add lwip library for the network stack   Maxim Uvarov
• [PATCH 00/10] Add support for Ethernet Boot on SK-AM62   Siddharth Vadapalli
• [PATCH 01/10] board: ti: am62x: Init DRAM size in R5/A53 SPL   Siddharth Vadapalli
• [PATCH 02/10] firmware: ti_sci: Add No-OP for "RX_FL_CFG"   Siddharth Vadapalli
• [PATCH 03/10] soc: ti: k3-navss-ringacc: Initialize base address of ring cfg registers   Siddharth Vadapalli
• [PATCH 04/10] soc: ti: k3-navss-ringacc: Fix reset ring API   Siddharth Vadapalli
• [PATCH 05/10] dma: ti: k3-udma: Add support for native configuration of chan/flow   Siddharth Vadapalli
• [PATCH 06/10] arm: mach-k3: am62: Update SoC autogenerated data to enable Ethernet Boot   Siddharth Vadapalli
• [PATCH 07/10] arm: mach-k3: am625_init: Probe AM65 CPSW NUSS   Siddharth Vadapalli
• [PATCH 08/10] configs: am62: Add configs for enabling ETHBOOT in R5SPL   Siddharth Vadapalli
• [PATCH 09/10] configs: am62x_evm_a53_defconfig: Enable configs required for Ethboot   Siddharth Vadapalli
• [PATCH 10/10] arm: dts: k3-am625-r5-sk: Enable DM services for main_pktdma   Siddharth Vadapalli
• [PATCH 01/10] board: ti: am62x: Init DRAM size in R5/A53 SPL   Siddharth Vadapalli
• [PATCH 00/10] Add support for Ethernet Boot on SK-AM62   Siddharth Vadapalli
• [PATCH 08/10] configs: am62: Add configs for enabling ETHBOOT in R5SPL   Siddharth Vadapalli
• [PATCH 09/10] configs: am62x_evm_a53_defconfig: Enable configs required for Ethboot   Siddharth Vadapalli
• [PATCH 00/10] Add support for Ethernet Boot on SK-AM62   Siddharth Vadapalli
• [PATCH 01/10] board: ti: am62x: Init DRAM size in R5/A53 SPL   Siddharth Vadapalli
• [PATCH 00/10] Add support for Ethernet Boot on SK-AM62   Siddharth Vadapalli
• [PATCH 01/10] board: ti: am62x: Init DRAM size in R5/A53 SPL   Siddharth Vadapalli
• [PATCH 07/10] arm: mach-k3: am625_init: Probe AM65 CPSW NUSS   Chintan Vankar
• [PATCH] ARM: imx: Auto-detect PHY on Data Modul i.MX8M Mini/Plus eDM SBC   Marek Vasut
• [PATCH] net: phy: broadcom: Configure LEDs on BCM54210E   Marek Vasut
• [PATCH] usb: dwc3: Integrate usb5744 & usb2244 driver support   Marek Vasut
• [PATCH] ARM: stm32: Set stdio to serial on DH STM32MP15xx DHSOM   Marek Vasut
• [PATCH] ARM: imx: Set stdio to serial on DH i.MX8M Plus DHCOM   Marek Vasut
• [PATCH] ARM: imx: Set stdio to serial on Data Modul i.MX8M Mini/Plus eDM SBC   Marek Vasut
• [RFC][PATCH] ARM: imx: verdin-imx8mm: Set CAN oscillator frequency based on model   Marek Vasut
• [PULL] u-boot-sh/master-sync-dts-663   Marek Vasut
• [PATCH] net: phy: the NC-SI phy device do not require mdio bus   Marek Vasut
• [PATCH v3] common: usb-hub: Reset hub port before scanning   Marek Vasut
• [PATCH v3] common: usb-hub: Reset hub port before scanning   Marek Vasut
• [RFC][PATCH] ARM: imx: verdin-imx8mm: Set CAN oscillator frequency based on model   Marek Vasut
• [PATCH v2] common: console: Fix print complete stdio device list   Marek Vasut
• [PATCH 1/2] imx8m: Enable LTO by default   Marek Vasut
• [PATCH 2/2] arm: imx: imx8m: Enable the SError exception   Marek Vasut
• [PATCH] ARM: imx: Enable SPL_BOARD_INIT on DH i.MX8M Plus DHCOM   Marek Vasut
• [PATCH] ARM: imx: Configure GIC clock parent on Data Modul i.MX8M Plus eDM SBC   Marek Vasut
• [PATCH v2] ARM: imx: Enable SPL_BOARD_INIT on DH i.MX8M Plus DHCOM   Marek Vasut
• [PATCH v2] ARM: imx: Configure GIC clock parent on Data Modul i.MX8M Plus eDM SBC   Marek Vasut
• [PATCH] ARM: imx: Enable kaslrseed command on DH i.MX8M Plus DHCOM   Marek Vasut
• [PATCH v4 00/11] An effort to bring DT bindings compliance within U-Boot   Marek Vasut
• [PATCH 1/3] net: phy: Make eth_phy_get_addr() generic   Marek Vasut
• [PATCH 2/3] net: sh_eth: Use PHY MDIO address from DT if available   Marek Vasut
• [PATCH 3/3] net: ravb: Use PHY MDIO address from DT if available   Marek Vasut
• [PATCH 1/3] clk: renesas: Drop include common.h   Marek Vasut
• [PATCH 2/3] pinctrl: renesas: Drop include common.h   Marek Vasut
• [PATCH 3/3] ARM: renesas: Drop include common.h   Marek Vasut
• [PATCH] ARM: renesas: whitehawk: Drop extra leading space   Marek Vasut
• [PATCH 01/11] dt-bindings: power: Add R8A779H0 V4M SYSC power domain definitions   Marek Vasut
• [PATCH 02/11] dt-bindings: clock: Add R8A779H0 V4M CPG Core Clock Definitions   Marek Vasut
• [PATCH 03/11] clk: renesas: Add R8A779H0 V4M clock tables   Marek Vasut
• [PATCH 04/11] clk: renesas: Implement R8A779H0 V4M PLL7 support   Marek Vasut
• [PATCH 05/11] pinctrl: renesas: Add R8A779H0 V4M PFC tables   Marek Vasut
• [PATCH 06/11] mtd: spi: renesas: Add R8A779H0 V4M support   Marek Vasut
• [PATCH 07/11] ARM: renesas: Add R8A779H0 V4M Kconfig entry and PRR ID   Marek Vasut
• [PATCH 08/11] ARM: dts: renesas: Add Renesas R8A779H0 V4M SoC support   Marek Vasut
• [PATCH 09/11] ARM: dts: renesas: Add Renesas R8A779H0 V4M DT extras   Marek Vasut
• [PATCH 10/11] ARM: dts: renesas: Add Renesas Gray Hawk boards support   Marek Vasut
• [PATCH 11/11] ARM: renesas: Add Renesas R8A779H0 V4M Gray Hawk board code   Marek Vasut
• [PATCH v4 00/11] An effort to bring DT bindings compliance within U-Boot   Marek Vasut
• [PATCH] usb: dwc3-of-simple: Remove Amlogic and Rockchip compatible   Marek Vasut
• [PATCH 3/3] net: ravb: Use PHY MDIO address from DT if available   Marek Vasut
• [PATCH 10/11] ARM: dts: renesas: Add Renesas Gray Hawk boards support   Marek Vasut
• [PATCH 03/11] clk: renesas: Add R8A779H0 V4M clock tables   Marek Vasut
• [PATCH 02/11] dt-bindings: clock: Add R8A779H0 V4M CPG Core Clock Definitions   Marek Vasut
• [PATCH 01/11] dt-bindings: power: Add R8A779H0 V4M SYSC power domain definitions   Marek Vasut
• [PATCH 09/11] ARM: dts: renesas: Add Renesas R8A779H0 V4M DT extras   Marek Vasut
• [PATCH] ARM: imx: Enable kaslrseed command on Data Modul i.MX8M Mini/Plus eDM SBC   Marek Vasut
• [PATCH v4 00/11] An effort to bring DT bindings compliance within U-Boot   Marek Vasut
• [PATCH v4 00/11] An effort to bring DT bindings compliance within U-Boot   Marek Vasut
• [PATCH v4 00/11] An effort to bring DT bindings compliance within U-Boot   Marek Vasut
• [PATCH 1/5] usb: ohci-generic: ignore ENOSYS and ENOTSUPP errors from clk and reset   Marek Vasut
• [PATCH v2] net: phy: Use PHY MDIO address from DT if available   Marek Vasut
• [PULL] u-boot-sh/master-cleanup   Marek Vasut
• [PATCH v2 01/11] dt-bindings: clock: Add R8A779H0 V4M CPG Core Clock Definitions   Marek Vasut
• [PATCH v2 02/11] dt-bindings: power: Add R8A779H0 V4M SYSC power domain definitions   Marek Vasut
• [PATCH v2 03/11] clk: renesas: Add R8A779H0 V4M clock tables   Marek Vasut
• [PATCH v2 04/11] clk: renesas: Implement R8A779H0 V4M PLL7 support   Marek Vasut
• [PATCH v2 05/11] pinctrl: renesas: Add R8A779H0 V4M PFC tables   Marek Vasut
• [PATCH v2 06/11] ARM: renesas: Add R8A779H0 V4M Kconfig entry and PRR ID   Marek Vasut
• [PATCH v2 07/11] mtd: spi: renesas: Add R8A779H0 V4M support   Marek Vasut
• [PATCH v2 08/11] ARM: dts: renesas: Add Renesas R8A779H0 V4M SoC support   Marek Vasut
• [PATCH v2 09/11] ARM: dts: renesas: Add Renesas R8A779H0 V4M DT extras   Marek Vasut
• [PATCH v2 10/11] ARM: dts: renesas: Add Renesas Gray Hawk boards support   Marek Vasut
• [PATCH v2 11/11] ARM: renesas: Add Renesas R8A779H0 V4M Gray Hawk board code   Marek Vasut
• [PATCH v2 07/11] mtd: spi: renesas: Add R8A779H0 V4M support   Marek Vasut
• [PATCH v2 07/11] mtd: spi: renesas: Add R8A779H0 V4M support   Marek Vasut
• [PATCH v2 0/8] cmd/mem.c fixups   Rasmus Villemoes
• [PATCH v2 1/8] cmd/mem.c: use memmove in do_mem_cp()   Rasmus Villemoes
• [PATCH v2 2/8] doc/usage/cmd/cp.rst: document that overlapping regions are supported   Rasmus Villemoes
• [PATCH v2 3/8] cmd/command.c: constify "arg" argument of cmd_get_data_size()   Rasmus Villemoes
• [PATCH v2 4/8] cmd/command.c: relax length check in cmd_get_data_size()   Rasmus Villemoes
• [PATCH v2 5/8] test: add test of "cp" shell command   Rasmus Villemoes
• [PATCH v2 6/8] cmd/mem.c: fix wrong use of ifdef, drop pointless SUPPORT_64BIT_DATA macro   Rasmus Villemoes
• [PATCH v2 7/8] README: drop mention of MEM_SUPPORT_64BIT_DATA   Rasmus Villemoes
• [PATCH v2 8/8] doc: drop references to non-existing CONFIG_MEM_SUPPORT_64BIT_DATA   Rasmus Villemoes
• [PATCH v9 2/2] arm64: boot: Support Flat Image Tree   Rasmus Villemoes
• [PATCH v4 5/6] mmc: bcmstb: Add support for bcm2712 SD controller   Stefan Wahren
• [PATCH v4 0/6] rpi5: initial support   Stefan Wahren
• [PATCH v4 0/6] rpi5: initial support   Stefan Wahren
• [PATCH v4 0/6] rpi5: initial support   Stefan Wahren
• [PATCH v4 0/6] rpi5: initial support   Stefan Wahren
• [PATCH v2] boot: add support for button commands   Michael Walle
• [PATCH v2] boot: add support for button commands   Michael Walle
• [PATCH v2] boot: add support for button commands   Michael Walle
• [PATCH v1] vexpress_ca9x4: Enable DM_SERIAL   Linus Walleij
• [PATCH v1] vexpress_ca9x4: Enable DM_SERIAL   Linus Walleij
• Could you please help me in resolving the "arch/arm/lib/vectors.S:87: Error: no such instruction: `b reset' ?"   Liu Wang
• Could you please help me in resolving the "arch/arm/lib/vectors.S:87: Error: no such instruction: `b reset' ?"   Liu Wang
• Could you please help me in resolving the "arch/arm/lib/vectors.S:87: Error: no such instruction: `b reset' ?"   Liu Wang
• Could you please help me in resolving the "arch/arm/lib/vectors.S:87: Error: no such instruction: `b reset' ?"   Liu Wang
• Could you please help me in resolving the "arch/arm/lib/vectors.S:87: Error: no such instruction: `b reset' ?"   Liu Wang
• Could you please help me in resolving the "arch/arm/lib/vectors.S:87: Error: no such instruction: `b reset' ?"   Liu Wang
• Could you please help me in resolving the " /reset.c:42:(.text.do_reset+0x20): undefined reference to `reset_cpu'?"   Liu Wang
• Could you please help me in resolving the " /reset.c:42:(.text.do_reset+0x20): undefined reference to `reset_cpu'?"   Liu Wang
• Could you please help me in resolving the " /reset.c:42:(.text.do_reset+0x20): undefined reference to `reset_cpu'?"   Liu Wang
• [PATCH 0/2] rockchip: Fix ethernet on Radxa ROCK Pi E v1.21   Trevor Woerner
• [PATCH 1/5] usb: ohci-generic: ignore ENOSYS and ENOTSUPP errors from clk and reset   Piotr Wojtaszczyk
• [PATCH 2/5] binman: Add basic 'file_size' and 'int32' entry types   Piotr Wojtaszczyk
• [PATCH 3/5] lpc32xx: Build firmware files using binman instead a rule in Makefile   Piotr Wojtaszczyk
• [PATCH 4/5] lpc32xx: Make XTAL OSC freq configurable, add UART input clock selection   Piotr Wojtaszczyk
• [PATCH 5/5] usb: lpc32xx: add DM_USB support   Piotr Wojtaszczyk
• Reviving bricked device   Łukasz Wójcik
• [PATCH] wdt: add HiSilicon watchdog driver support   Yang Xiwen
• [PATCH] mmc: dw_mmc: Don't return error if data busy timeout   Yang Xiwen
• [PATCH v9 2/2] arm64: boot: Support Flat Image Tree   Masahiro Yamada
• [PATCH v9 2/2] arm64: boot: Support Flat Image Tree   Masahiro Yamada
• [PATCH v9 2/2] arm64: boot: Support Flat Image Tree   Masahiro Yamada
• [PATCH 1/2] board: rockchip: Add support for rk3588s based Cool Pi 4B   Andy Yan
• [PATCH 2/2] board: rockchip: Add support for rk3588 based Cool Pi CM5 EVB   Andy Yan
• [PATCH] rockchip: rk3568: add support of all UART   Kever Yang
• [PATCH v1] arm: dts: rockchip: rk3288: move to 64 bit reg size   Kever Yang
• [PATCH v2] rockchip: rk35xx: expand space for decompressed kernel   Kever Yang
• [PATCH] board: rockchip: Add support for FriendlyARM NanoPi R2C Plus   Kever Yang
• [PATCH] rockchip: px30: add support for iesy PX30 SoM OSM-S   Kever Yang
• [PATCH v2] rockchip: rk3328: Set efuse auto mode and timing control   Kever Yang
• [PATCH v3] arch: arm: Kconfig: Enable BOOTSTD_FULL for Rockchip SoCs   Kever Yang
• [PATCH v3] arch: arm: Kconfig: Enable BOOTSTD_FULL for Rockchip SoCs   Kever Yang
• [PATCH V2 1/4] board: rockchip: Refactor panel auto-detect code   Kever Yang
• [PATCH next v2 6/6] rockchip: rk3128: remove noop file   Kever Yang
• [PATCH next v2 5/6] rockchip: remove unused global data ptr   Kever Yang
• [PATCH next v2 4/6] rockchip: rk3588: insert u-boot,spl-boot-device into U-Boot device tree   Kever Yang
• [PATCH v3] arch: arm: Kconfig: Enable BOOTSTD_FULL for Rockchip SoCs   Kever Yang
• [PATCH v4 1/6] rockchip: ringneck-px30: do not hardcode MMC controller paths   Kever Yang
• [PATCH v4 2/6] rockchip: puma-rk3399: do not hardcode MMC controller paths   Kever Yang
• [PATCH v4 3/6] rockchip: ringneck-px30/puma-rk3399: factor out storage medium selection   Kever Yang
• AW: [PATCH] rockchip: px30: add support for iesy PX30 SoM OSM-S   Kever Yang
• [PATCH] board: rockchip: Add support for FriendlyARM NanoPi R2C Plus   Kever Yang
• Black and White Artifact on BMP (24BPP) logo during boot   Kever Yang
• [PATCH v4] dts: rockpro64: Disable usb regulators-always-on   Kever Yang
• [PATCH V2] board: rockchip: add Powkiddy X55   Kever Yang
• [PATCH v3 1/6] rockchip: rk3399: simplify logic for getting SPL boot medium DT node   Kever Yang
• [PATCH v3 2/6] rockchip: px30: simplify logic for getting SPL boot medium DT node   Kever Yang
• [PATCH v3 3/6] rockchip: factor out spl_perform_fixups into common spl-boot-order   Kever Yang
• [PATCH v3 4/6] rockchip: find U-boot proper boot device by inverting the logic that sets it   Kever Yang
• [PATCH v2 1/4] rockchip: rk3588: Fix boot from SPI flash   Kever Yang
• [PATCH v2 2/4] rockchip: rk3588-nanopc-t6: Build SPI image   Kever Yang
• [PATCH v2 3/4] rockchip: rk3588-orangepi-5-plus: Build SPI image   Kever Yang
• [PATCH v2 4/4] rockchip: rk3588s-orangepi-5: Build SPI image   Kever Yang
• [PATCH V4 1/7] board: rockchip: Refactor panel auto-detect code   Kever Yang
• [PATCH V4 3/7] rockchip: boot_mode: Allow rockchip_dnl_key_pressed() in SPL   Kever Yang
• [PATCH V4 5/7] rockchip: board: Add board_rng_seed() for all Rockchip devices   Kever Yang
• [PATCH V4 6/7] board: rockchip: Add support for new boards to RGxx3   Kever Yang
• [PATCH V4 7/7] doc: board: anbernic: Update rgxx3 to add new boards   Kever Yang
• [PATCH v2 1/2] configs: rockchip: Use dwc3-generic driver on RK3328 and RK3399   Kever Yang
• [PATCH v2 2/2] rockchip: board: Remove dwc3 usb init and gadget handler functions   Kever Yang
• [PATCH v3 4/6] rockchip: find U-boot proper boot device by inverting the logic that sets it   Kever Yang
• Pull request: u-boot-rockchip-20240119   Kever Yang
• [PATCH V4 3/7] rockchip: boot_mode: Allow rockchip_dnl_key_pressed() in SPL   Kever Yang
• [PATCH] rockchip: sdram: fix LPDDR5 bank info for sys_reg version 3   Kever Yang
• [PATCH v2] rockchip: spl: Enable caches to speed up checksum validation   Kever Yang
• [PATCH] rockchip: sdram: fix LPDDR5 bank info for sys_reg version 3   Kever Yang
• [PATCH v2] rockchip: sdram: fix LPDDR5 bank info for sys_reg version 3   Kever Yang
• [PATCH 01/20] Convert CONFIG_SPL_STACK to Kconfig   Kever Yang
• [PATCH 01/20] Convert CONFIG_SPL_STACK to Kconfig   Kever Yang
• [PATCH 01/20] Convert CONFIG_SPL_STACK to Kconfig   Kever Yang
• [PATCH 1/2] spl: Make SPL_STACK available for ROCKCHIP_RK3036 without spl framework   Kever Yang
• [PATCH 2/2] configs: rockchip: rk3036: Fix CONFIG_SPL_STACK define   Kever Yang
• [PATCH 13/18] rockchip: rk3588: fix non-working SD controller if booting from other media   Kever Yang
• [PATCH 17/18] rockchip: rk3588: bind MMC controllers in U-Boot proper pre-reloc   Kever Yang
• [PATCH 15/18] rockchip: migrate hardware.h inclusion into appropriate files   Kever Yang
• [PATCH 13/18] rockchip: rk3588: fix non-working SD controller if booting from other media   Kever Yang
• [PATCH 13/18] rockchip: rk3588: fix non-working SD controller if booting from other media   Kever Yang
• [PATCH 17/18] rockchip: rk3588: bind MMC controllers in U-Boot proper pre-reloc   Kever Yang
• [PATCH 17/18] rockchip: rk3588: bind MMC controllers in U-Boot proper pre-reloc   Kever Yang
• [PATCH 15/18] rockchip: migrate hardware.h inclusion into appropriate files   Kever Yang
• [PATCH 17/18] rockchip: rk3588: bind MMC controllers in U-Boot proper pre-reloc   Kever Yang
• [PATCH v2] imx: imx8mp: Add support for Polyhex Debix Model A SBC   Milan Zamazal
• [PATCH v2] imx: imx8mp: Add support for Polyhex Debix Model A SBC   Milan Zamazal
• [RFC][PATCH] ARM: imx: verdin-imx8mm: Set CAN oscillator frequency based on model   Marcel Ziswiler
• [RFC][PATCH] ARM: imx: verdin-imx8mm: Set CAN oscillator frequency based on model   Marcel Ziswiler
• [PATCH] toradex: tdx-cfg-block: Add new apalis and colibri pid   Marcel Ziswiler
• REGRESSION: [PATCH 5/9] toradex: Use checkboard() instead of show_board_info()   Marcel Ziswiler
• [PATCH] sunxi: dram: h6: fix the unreliability related to the DDR3 sequence   patrick9876 at free.fr
• [PATCH] headers: don't depend on errno.h being available   max.oss.09 at gmail.com
• [U-Boot] [PATCH 1/1] sunxi: add Linksprite pcDuino v1/v2 support   nouremad1610 at hotmail.com
• [PATCH v2 02/17] video: dw_hdmi: Add Vendor PHY handling   neil.armstrong at linaro.org
• [PATCH v3] clk: meson: add Hardware Clock measure driver   neil.armstrong at linaro.org
• [PATCH 1/2] MAINTAINERS: add Mattijs for Android AB   neil.armstrong at linaro.org
• [PATCH 2/2] MAINTAINERS: add Mattijs for Android AVB   neil.armstrong at linaro.org
• [UBOOT PATCH v4] test/py: net: Add dhcp abort test   neil.armstrong at linaro.org
• U-Boot for Terasic - Cyclone 5 - DE10-standard board   mauricio.penteado at litinow.com
• [PATCH 1/1] test: Skip cleanup test if not built out of tree   rahix
• [PATCH v2 1/2] part: Add a function to find ESP partition   mchitale at ventanamicro.com
• [PATCH v3 00/11] Enable setexpr command to print cpu-list like bitmaps   lukas.funke-oss at weidmueller.com
• [PATCH v3 01/11] sandbox: add generic find_next_zero_bit implementation   lukas.funke-oss at weidmueller.com
• [PATCH v3 02/11] linux: bitmap.h: add 'for_each_set_bitrange' iteration macro   lukas.funke-oss at weidmueller.com
• [PATCH v3 03/11] test: cmd: setexpr: Add tests for bitmap string format   lukas.funke-oss at weidmueller.com
• [PATCH v3 04/11] doc: printf() codes: Add bitmap format specifier   lukas.funke-oss at weidmueller.com
• [PATCH v3 05/11] cmd: printf: Correctly handle field width   lukas.funke-oss at weidmueller.com
• [PATCH v3 06/11] lib: Add hextobarray() function   lukas.funke-oss at weidmueller.com
• [PATCH v3 07/11] lib: vsprintf: enable '%pbl' format specifier   lukas.funke-oss at weidmueller.com
• [PATCH v3 08/11] setexpr: rename 'get_arg()' to 'setexpr_get_arg()'   lukas.funke-oss at weidmueller.com
• [PATCH v3 09/11] setexpr: Promote 'setexpr_get_arg()' to a public function   lukas.funke-oss at weidmueller.com
• [PATCH v3 10/11] setexptr: Extend setexpr_get_arg() to handle pointer to memory   lukas.funke-oss at weidmueller.com
• [PATCH v3 11/11] cmd: printf: forward '%p' format string specifier   lukas.funke-oss at weidmueller.com
• [PATCH] sunxi: H616: Add OrangePi Zero 2W board support   Jernej Škrabec
• [PATCH 1/4] riscv: sophgo: milkv_duo: initial support added   刘孔阳