[PATCH 09/10] configs: am62x_evm_a53_defconfig: Enable configs required for Ethboot

Siddharth Vadapalli s-vadapalli at ti.com
Fri Jan 12 13:39:03 CET 2024



On 12/01/24 18:03, Nishanth Menon wrote:
> On 12:17-20240112, Siddharth Vadapalli wrote:
>> From: Kishon Vijay Abraham I <kishon at ti.com>
>>
>> Enable config options needed to support Ethernet boot on AM62x SK.
>>
>> Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
>> Signed-off-by: Siddharth Vadapalli <s-vadapalli at ti.com>
>> ---
>>  configs/am62x_evm_a53_defconfig | 8 ++++++++
>>  1 file changed, 8 insertions(+)
>>
>> diff --git a/configs/am62x_evm_a53_defconfig b/configs/am62x_evm_a53_defconfig
>> index aa96c1b312..5c56b17a3e 100644
>> --- a/configs/am62x_evm_a53_defconfig
>> +++ b/configs/am62x_evm_a53_defconfig
>> @@ -17,6 +17,7 @@ CONFIG_OF_LIBFDT_OVERLAY=y
>>  CONFIG_DM_RESET=y
>>  CONFIG_SPL_MMC=y
>>  CONFIG_SPL_SERIAL=y
>> +CONFIG_SPL_DRIVERS_MISC=y
>>  CONFIG_SPL_STACK_R_ADDR=0x82000000
>>  CONFIG_SPL_SIZE_LIMIT=0x40000
>>  CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x800
>> @@ -37,13 +38,19 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
>>  CONFIG_SPL_BSS_START_ADDR=0x80c80000
>>  CONFIG_SPL_BSS_MAX_SIZE=0x80000
>>  CONFIG_SPL_SYS_REPORT_STACK_F_USAGE=y
>> +CONFIG_SPL_BOARD_INIT=y
>>  CONFIG_SPL_SYS_MALLOC_SIMPLE=y
>>  CONFIG_SPL_STACK_R=y
>>  CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
>>  CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
>> +CONFIG_SPL_DMA=y
>> +CONFIG_SPL_ENV_SUPPORT=y
>> +CONFIG_SPL_ETH=y
>>  CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
>>  CONFIG_SPL_DM_MAILBOX=y
>>  CONFIG_SPL_DM_SPI_FLASH=y
>> +CONFIG_SPL_NET=y
>> +CONFIG_SPL_NET_VCI_STRING="AM62X U-Boot A53 SPL"
>>  CONFIG_SPL_POWER_DOMAIN=y
>>  # CONFIG_SPL_SPI_FLASH_TINY is not set
>>  CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
>> @@ -61,6 +68,7 @@ CONFIG_SPL_DM=y
>>  CONFIG_SPL_DM_SEQ_ALIAS=y
>>  CONFIG_REGMAP=y
>>  CONFIG_SPL_REGMAP=y
>> +CONFIG_SPL_SYSCON=y
>>  CONFIG_SPL_OF_TRANSLATE=y
>>  CONFIG_CLK=y
>>  CONFIG_SPL_CLK=y
>> -- 
>> 2.34.1
>>
> 
> NAK again - why cant we use config fragments?

Ok. I will use config fragments.

> 

-- 
Regards,
Siddharth.


More information about the U-Boot mailing list