[PATCH 09/10] configs: am62x_evm_a53_defconfig: Enable configs required for Ethboot

[Nishanth Menon]

On 12:17-20240112, Siddharth Vadapalli wrote:
> From: Kishon Vijay Abraham I <kishon at ti.com>
> 
> Enable config options needed to support Ethernet boot on AM62x SK.
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
> Signed-off-by: Siddharth Vadapalli <s-vadapalli at ti.com>
> ---
>  configs/am62x_evm_a53_defconfig | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/configs/am62x_evm_a53_defconfig b/configs/am62x_evm_a53_defconfig
> index aa96c1b312..5c56b17a3e 100644
> --- a/configs/am62x_evm_a53_defconfig
> +++ b/configs/am62x_evm_a53_defconfig
> @@ -17,6 +17,7 @@ CONFIG_OF_LIBFDT_OVERLAY=y
>  CONFIG_DM_RESET=y
>  CONFIG_SPL_MMC=y
>  CONFIG_SPL_SERIAL=y
> +CONFIG_SPL_DRIVERS_MISC=y
>  CONFIG_SPL_STACK_R_ADDR=0x82000000
>  CONFIG_SPL_SIZE_LIMIT=0x40000
>  CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x800
> @@ -37,13 +38,19 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
>  CONFIG_SPL_BSS_START_ADDR=0x80c80000
>  CONFIG_SPL_BSS_MAX_SIZE=0x80000
>  CONFIG_SPL_SYS_REPORT_STACK_F_USAGE=y
> +CONFIG_SPL_BOARD_INIT=y
>  CONFIG_SPL_SYS_MALLOC_SIMPLE=y
>  CONFIG_SPL_STACK_R=y
>  CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
>  CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
> +CONFIG_SPL_DMA=y
> +CONFIG_SPL_ENV_SUPPORT=y
> +CONFIG_SPL_ETH=y
>  CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
>  CONFIG_SPL_DM_MAILBOX=y
>  CONFIG_SPL_DM_SPI_FLASH=y
> +CONFIG_SPL_NET=y
> +CONFIG_SPL_NET_VCI_STRING="AM62X U-Boot A53 SPL"
>  CONFIG_SPL_POWER_DOMAIN=y
>  # CONFIG_SPL_SPI_FLASH_TINY is not set
>  CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
> @@ -61,6 +68,7 @@ CONFIG_SPL_DM=y
>  CONFIG_SPL_DM_SEQ_ALIAS=y
>  CONFIG_REGMAP=y
>  CONFIG_SPL_REGMAP=y
> +CONFIG_SPL_SYSCON=y
>  CONFIG_SPL_OF_TRANSLATE=y
>  CONFIG_CLK=y
>  CONFIG_SPL_CLK=y
> -- 
> 2.34.1
> 

NAK again - why cant we use config fragments?

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D