[PATCH 09/10] configs: am62x_evm_a53_defconfig: Enable configs required for Ethboot

[Siddharth Vadapalli]

From: Kishon Vijay Abraham I <kishon at ti.com>

Enable config options needed to support Ethernet boot on AM62x SK.

Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli at ti.com>
---
 configs/am62x_evm_a53_defconfig | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/configs/am62x_evm_a53_defconfig b/configs/am62x_evm_a53_defconfig
index aa96c1b312..5c56b17a3e 100644
--- a/configs/am62x_evm_a53_defconfig
+++ b/configs/am62x_evm_a53_defconfig
@@ -17,6 +17,7 @@ CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
+CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL_STACK_R_ADDR=0x82000000
 CONFIG_SPL_SIZE_LIMIT=0x40000
 CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x800
@@ -37,13 +38,19 @@ CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x80c80000
 CONFIG_SPL_BSS_MAX_SIZE=0x80000
 CONFIG_SPL_SYS_REPORT_STACK_F_USAGE=y
+CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_STACK_R=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
+CONFIG_SPL_DMA=y
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_ETH=y
 CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
 CONFIG_SPL_DM_MAILBOX=y
 CONFIG_SPL_DM_SPI_FLASH=y
+CONFIG_SPL_NET=y
+CONFIG_SPL_NET_VCI_STRING="AM62X U-Boot A53 SPL"
 CONFIG_SPL_POWER_DOMAIN=y
 # CONFIG_SPL_SPI_FLASH_TINY is not set
 CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
@@ -61,6 +68,7 @@ CONFIG_SPL_DM=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_REGMAP=y
 CONFIG_SPL_REGMAP=y
+CONFIG_SPL_SYSCON=y
 CONFIG_SPL_OF_TRANSLATE=y
 CONFIG_CLK=y
 CONFIG_SPL_CLK=y
-- 
2.34.1