[PATCH] imx9: clock: Fix board_interface_eth_init for FEC

[Primoz Fiser]

Commit d5eae216d833 ("net: dwc_eth_qos: Add board_interface_eth_init()
for i.MX93") implemented board_interface_eth_init for i.MX9 platforms.
However it only accounted for the EQOS interface while any board using
FEC as primary Ethernet interface was left out as return value -EINVAL
is always returned from the function in such case.

Fix this by returning 0 (success) when FEC interface is primarily used
instead of EQOS interface on i.MX93.

Fixes: d5eae216d833 ("net: dwc_eth_qos: Add board_interface_eth_init() for i.MX93")
Signed-off-by: Primoz Fiser <primoz.fiser at norik.com>
---
 arch/arm/mach-imx/imx9/clock.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/mach-imx/imx9/clock.c b/arch/arm/mach-imx/imx9/clock.c
index 92c41e9a67bf..75d92af036a1 100644
--- a/arch/arm/mach-imx/imx9/clock.c
+++ b/arch/arm/mach-imx/imx9/clock.c
@@ -882,6 +882,11 @@ int board_interface_eth_init(struct udevice *dev, phy_interface_t interface_type
 	    device_is_compatible(dev, "nxp,imx93-dwmac-eqos"))
 		return imx93_eqos_interface_init(dev, interface_type);
 
+	if (IS_ENABLED(CONFIG_IMX93) &&
+	    IS_ENABLED(CONFIG_FEC_MXC) &&
+	    device_is_compatible(dev, "fsl,imx93-fec"))
+		return 0;
+
 	return -EINVAL;
 }
 
-- 
2.25.1