[PATCH v3 01/17] video: rockchip: hdmi: Detect hpd after controller init

Jagan Teki jagan at amarulasolutions.com
Wed Jan 17 08:51:38 CET 2024


From: Jagan Teki <jagan at edgeble.ai>

HDP is a hardware connector event, so detect the same once the
controller and attached PHY initialization are done.

Signed-off-by: Jagan Teki <jagan at edgeble.ai>
---
Changes for v3, v2:
- none

 drivers/video/rockchip/rk_hdmi.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/video/rockchip/rk_hdmi.c b/drivers/video/rockchip/rk_hdmi.c
index 8dcd4d5964..b75a174489 100644
--- a/drivers/video/rockchip/rk_hdmi.c
+++ b/drivers/video/rockchip/rk_hdmi.c
@@ -112,14 +112,14 @@ int rk_hdmi_probe(struct udevice *dev)
 	struct dw_hdmi *hdmi = &priv->hdmi;
 	int ret;
 
+	dw_hdmi_init(hdmi);
+	dw_hdmi_phy_init(hdmi);
+
 	ret = dw_hdmi_phy_wait_for_hpd(hdmi);
 	if (ret < 0) {
 		debug("hdmi can not get hpd signal\n");
 		return -1;
 	}
 
-	dw_hdmi_init(hdmi);
-	dw_hdmi_phy_init(hdmi);
-
 	return 0;
 }
-- 
2.25.1



More information about the U-Boot mailing list