[PATCH] Add Phytec i.MX93 support

Mathieu Othacehe othacehe at gnu.org
Wed Jan 17 08:52:54 CET 2024


Add support for the Phytec i.MX93 Segin evaluation kit. The SoM consists
of an NXP i.MX93 dual A55 CPU. The SoM is mounted on a Phytec Segin SBC.

Signed-off-by: Mathieu Othacehe <othacehe at gnu.org>
---
 arch/arm/dts/Makefile                         |    3 +-
 arch/arm/dts/imx93-phycore-segin-u-boot.dtsi  |  274 +++
 arch/arm/dts/imx93-phycore-segin.dts          |   95 +
 arch/arm/dts/imx93-phycore-som.dtsi           |   64 +
 arch/arm/mach-imx/imx9/Kconfig                |    6 +
 board/phytec/common/mmc.c                     |   49 +
 board/phytec/imx93_phycore/Kconfig            |   21 +
 board/phytec/imx93_phycore/MAINTAINERS        |   10 +
 board/phytec/imx93_phycore/Makefile           |   16 +
 board/phytec/imx93_phycore/imx93_phycore.c    |   89 +
 board/phytec/imx93_phycore/imx93_phycore.env  |   96 +
 .../phytec/imx93_phycore/lpddr4_timing_1GB.c  | 1546 +++++++++++++++++
 board/phytec/imx93_phycore/spl.c              |  181 ++
 configs/imx93_phycore_defconfig               |  147 ++
 doc/board/phytec/imx93_phycore.rst            |   68 +
 doc/board/phytec/index.rst                    |    1 +
 include/configs/imx93_phycore.h               |   47 +
 17 files changed, 2712 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/dts/imx93-phycore-segin-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx93-phycore-segin.dts
 create mode 100644 arch/arm/dts/imx93-phycore-som.dtsi
 create mode 100644 board/phytec/common/mmc.c
 create mode 100644 board/phytec/imx93_phycore/Kconfig
 create mode 100644 board/phytec/imx93_phycore/MAINTAINERS
 create mode 100644 board/phytec/imx93_phycore/Makefile
 create mode 100644 board/phytec/imx93_phycore/imx93_phycore.c
 create mode 100644 board/phytec/imx93_phycore/imx93_phycore.env
 create mode 100644 board/phytec/imx93_phycore/lpddr4_timing_1GB.c
 create mode 100644 board/phytec/imx93_phycore/spl.c
 create mode 100644 configs/imx93_phycore_defconfig
 create mode 100644 doc/board/phytec/imx93_phycore.rst
 create mode 100644 include/configs/imx93_phycore.h

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index d456a524b36..4a23e2a2f49 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1127,7 +1127,8 @@ dtb-$(CONFIG_ARCH_IMX8M) += \
 
 dtb-$(CONFIG_ARCH_IMX9) += \
 	imx93-11x11-evk.dtb \
-	imx93-var-som-symphony.dtb
+	imx93-var-som-symphony.dtb \
+	imx93-phycore-segin.dtb
 
 dtb-$(CONFIG_ARCH_IMXRT) += imxrt1050-evk.dtb \
 	imxrt1020-evk.dtb \
diff --git a/arch/arm/dts/imx93-phycore-segin-u-boot.dtsi b/arch/arm/dts/imx93-phycore-segin-u-boot.dtsi
new file mode 100644
index 00000000000..6d75f1985aa
--- /dev/null
+++ b/arch/arm/dts/imx93-phycore-segin-u-boot.dtsi
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Christoph Stoidner <c.stoidner at phytec.de>
+ *
+ * Product homepage:
+ * phyBOARD-Segin carrier board is reused for the i.MX93 design.
+ * https://www.phytec.de/produkte/single-board-computer/phyboard-segin-imx6ul/
+ */
+
+#include "imx93-u-boot.dtsi"
+
+/ {
+	wdt-reboot {
+		compatible = "wdt-reboot";
+		wdt = <&wdog3>;
+		bootph-pre-ram;
+		bootph-some-ram;
+	};
+
+	aliases {
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+};
+
+&{/soc at 0} {
+	bootph-all;
+	bootph-pre-ram;
+};
+
+&aips1 {
+	bootph-pre-ram;
+	bootph-all;
+};
+
+&aips2 {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&aips3 {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&iomuxc {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&reg_usdhc2_vmmc {
+	u-boot,off-on-delay-us = <20000>;
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&pinctrl_reg_usdhc2_vmmc {
+	bootph-pre-ram;
+};
+
+&pinctrl_uart1 {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&pinctrl_usdhc2 {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&gpio1 {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&gpio2 {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&gpio3 {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&gpio4 {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&lpuart1 {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&usdhc1 {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&usdhc2 {
+	bootph-pre-ram;
+	bootph-some-ram;
+	fsl,signal-voltage-switch-extra-delay-ms = <8>;
+};
+
+&lpi2c1 {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&lpi2c2 {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&lpi2c3 {
+	bootph-pre-ram;
+	bootph-some-ram;
+};
+
+&s4muap {
+	bootph-pre-ram;
+	bootph-some-ram;
+	status = "okay";
+};
+
+&clk {
+	bootph-all;
+	bootph-pre-ram;
+	/delete-property/ assigned-clocks;
+	/delete-property/ assigned-clock-rates;
+	/delete-property/ assigned-clock-parents;
+};
+
+&osc_32k {
+	bootph-all;
+	bootph-pre-ram;
+};
+
+&osc_24m {
+	bootph-all;
+	bootph-pre-ram;
+};
+
+&clk_ext1 {
+	bootph-all;
+	bootph-pre-ram;
+};
+
+/*
+ * The two nodes below won't be needed once nxp,pca9451a
+ * support is added to the Linux kernel.
+ */
+&iomuxc {
+	pinctrl_lpi2c3: lpi2c3grp {
+	bootph-pre-ram;
+	fsl,pins = <
+		MX93_PAD_GPIO_IO28__LPI2C3_SDA			0x40000b9e
+		MX93_PAD_GPIO_IO29__LPI2C3_SCL			0x40000b9e
+	>;
+	};
+};
+
+&lpi2c3 {
+	bootph-pre-ram;
+	bootph-some-ram;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-1 = <&pinctrl_lpi2c3>;
+	status = "okay";
+
+	pmic at 25 {
+		bootph-pre-ram;
+		bootph-some-ram;
+		compatible = "nxp,pca9451a";
+		reg = <0x25>;
+		pinctrl-names = "default";
+
+		regulators {
+			bootph-pre-ram;
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck4: BUCK4{
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5{
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
diff --git a/arch/arm/dts/imx93-phycore-segin.dts b/arch/arm/dts/imx93-phycore-segin.dts
new file mode 100644
index 00000000000..a843b322a07
--- /dev/null
+++ b/arch/arm/dts/imx93-phycore-segin.dts
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Christoph Stoidner <c.stoidner at phytec.de>
+ * Copyright (C) 2024 Mathieu Othacehe <m.othacehe at gmail.com>
+ *
+ */
+/dts-v1/;
+
+#include "imx93-phycore-som.dtsi"
+
+/{
+	model = "PHYTEC phyBOARD-Segin-i.MX93";
+	compatible = "phytec,imx93-phycore-segin", "phytec,imx93-phycore-som",
+		     "fsl,imx93";
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+/* Console */
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	clocks = <&clk IMX93_CLK_LPUART1_GATE>, <&clk IMX93_CLK_LPUART1_GATE>;
+	clock-names = "ipg", "per";
+	status = "okay";
+};
+
+/* SD-Card */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+	no-sdio;
+	no-mmc;
+};
+
+/* Watchdog */
+&wdog3 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	status = "okay";
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX			0x31e
+			MX93_PAD_UART1_TXD__LPUART1_TX			0x31e
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_RESET_B__GPIO3_IO07		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00			0x31e
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK			0x178e
+			MX93_PAD_SD2_CMD__USDHC2_CMD			0x139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0		0x138e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1		0x138e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2		0x138e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3		0x139e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e
+		>;
+	};
+};
diff --git a/arch/arm/dts/imx93-phycore-som.dtsi b/arch/arm/dts/imx93-phycore-som.dtsi
new file mode 100644
index 00000000000..4edff4a50b2
--- /dev/null
+++ b/arch/arm/dts/imx93-phycore-som.dtsi
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Christoph Stoidner <c.stoidner at phytec.de>
+ * Copyright (C) 2024 Mathieu Othacehe <m.othacehe at gmail.com>
+ *
+ */
+/dts-v1/;
+
+#include "imx93.dtsi"
+
+/{
+	model = "PHYTEC phyCORE-i.MX93";
+	compatible = "phytec,imx93-phycore-som", "fsl,imx93";
+
+	reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			alloc-ranges = <0 0x80000000 0 0x40000000>;
+			size = <0 0x10000000>;
+			linux,cma-default;
+		};
+
+		ele_reserved: ele-reserved at a4120000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa4120000 0 0x100000>;
+			no-map;
+		};
+	};
+};
+
+/* eMMC */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1>;
+	pinctrl-2 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x13fe
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x13fe
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x13fe
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x13fe
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x13fe
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x13fe
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x13fe
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x13fe
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x13fe
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
+		>;
+	};
+};
diff --git a/arch/arm/mach-imx/imx9/Kconfig b/arch/arm/mach-imx/imx9/Kconfig
index 961d6f527ab..0c1459c5cde 100644
--- a/arch/arm/mach-imx/imx9/Kconfig
+++ b/arch/arm/mach-imx/imx9/Kconfig
@@ -37,10 +37,16 @@ config TARGET_IMX93_VAR_SOM
 	select IMX93
 	select IMX9_LPDDR4X
 
+config TARGET_IMX93_PHYCORE
+	bool "imx93_phycore"
+	select IMX93
+	select IMX9_LPDDR4X
+
 endchoice
 
 source "board/freescale/imx93_evk/Kconfig"
 source "board/variscite/imx93_var_som/Kconfig"
+source "board/phytec/imx93_phycore/Kconfig"
 
 endif
 
diff --git a/board/phytec/common/mmc.c b/board/phytec/common/mmc.c
new file mode 100644
index 00000000000..d747aef232f
--- /dev/null
+++ b/board/phytec/common/mmc.c
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2018-2022 NXP
+ */
+
+#include <command.h>
+#include <asm/arch/sys_proto.h>
+#include <linux/errno.h>
+#include <asm/io.h>
+#include <stdbool.h>
+#include <vsprintf.h>
+#include <mmc.h>
+#include <env.h>
+
+static int check_mmc_autodetect(void)
+{
+	char *autodetect_str = env_get("mmcautodetect");
+
+	if (autodetect_str && !strcmp(autodetect_str, "yes"))
+		return 1;
+
+	return 0;
+}
+
+/* This should be defined for each board */
+__weak int mmc_map_to_kernel_blk(int dev_no)
+{
+	return dev_no;
+}
+
+void board_late_mmc_env_init(void)
+{
+	char cmd[32];
+	char mmcblk[32];
+	u32 dev_no = mmc_get_env_dev();
+
+	if (!check_mmc_autodetect())
+		return;
+
+	env_set_ulong("mmcdev", dev_no);
+
+	/* Set mmcblk env */
+	sprintf(mmcblk, "/dev/mmcblk%dp2 rootwait rw", mmc_map_to_kernel_blk(dev_no));
+	env_set("mmcroot", mmcblk);
+
+	sprintf(cmd, "mmc dev %d", dev_no);
+	run_command(cmd, 0);
+}
diff --git a/board/phytec/imx93_phycore/Kconfig b/board/phytec/imx93_phycore/Kconfig
new file mode 100644
index 00000000000..344df57afb0
--- /dev/null
+++ b/board/phytec/imx93_phycore/Kconfig
@@ -0,0 +1,21 @@
+
+if TARGET_IMX93_PHYCORE
+
+config SYS_BOARD
+	default "imx93_phycore"
+
+config SYS_VENDOR
+	default "phytec"
+
+config SYS_CONFIG_NAME
+	default "imx93_phycore"
+
+config IMX93_PHYCORE_LPDDR4X_1GB
+	bool "Using LPDDR4X Timing and size of 1GB"
+	default y
+	select IMX9_LPDDR4X
+	help
+	  Select the LPDDR4X timing and size of 1GB
+
+          This sets the LPDDR4X timing and size of 1GB.
+endif
diff --git a/board/phytec/imx93_phycore/MAINTAINERS b/board/phytec/imx93_phycore/MAINTAINERS
new file mode 100644
index 00000000000..deea6f36327
--- /dev/null
+++ b/board/phytec/imx93_phycore/MAINTAINERS
@@ -0,0 +1,10 @@
+phyCORE-i.MX93
+M:	Mathieu Othacehe <m.othacehe at gmail.com>
+W:      https://www.phytec.de/produkte/system-on-modules/phycore-imx-91-93/
+S:      Maintained
+F:      arch/arm/dts/imx93-phycore-segin.dts
+F:      arch/arm/dts/imx93-phycore-som.dtsi
+F:      arch/arm/dts/imx93-phycore-segin-u-boot.dtsi
+F:      board/phytec/imx93_phycore/
+F:      configs/imx93_phycore_defconfig
+F:      include/configs/imx93_phycore.h
diff --git a/board/phytec/imx93_phycore/Makefile b/board/phytec/imx93_phycore/Makefile
new file mode 100644
index 00000000000..058663b7f8a
--- /dev/null
+++ b/board/phytec/imx93_phycore/Makefile
@@ -0,0 +1,16 @@
+#
+# Copyright 2022 NXP
+# Copyright (C) 2023 PHYTEC Messtechnik GmbH
+# Christoph Stoidner <c.stoidner at phytec.de>
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+
+obj-y += imx93_phycore.o
+
+ifdef CONFIG_SPL_BUILD
+obj-y += spl.o
+obj-$(CONFIG_IMX93_PHYCORE_LPDDR4X_1GB) += lpddr4_timing_1GB.o
+else
+obj-y += ../common/mmc.o
+endif
diff --git a/board/phytec/imx93_phycore/imx93_phycore.c b/board/phytec/imx93_phycore/imx93_phycore.c
new file mode 100644
index 00000000000..2a434637399
--- /dev/null
+++ b/board/phytec/imx93_phycore/imx93_phycore.c
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2022 NXP
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Christoph Stoidner <c.stoidner at phytec.de>
+ */
+
+#include <env.h>
+#include <init.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <asm/global_data.h>
+#include <asm/arch-imx9/ccm_regs.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch-imx9/imx93_pins.h>
+#include <asm/arch/clock.h>
+#include <power/pmic.h>
+#include <dm/device.h>
+#include <dm/uclass.h>
+#include <usb.h>
+#include <dwc3-uboot.h>
+#include <asm/gpio.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL	(PAD_CTL_DSE(6) | PAD_CTL_FSEL2)
+#define WDOG_PAD_CTRL	(PAD_CTL_DSE(6) | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
+
+static const iomux_v3_cfg_t uart_pads[] = {
+	MX93_PAD_UART1_RXD__LPUART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
+	MX93_PAD_UART1_TXD__LPUART1_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
+};
+
+int board_early_init_f(void)
+{
+	imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
+
+	init_uart_clk(LPUART1_CLK_ROOT);
+
+	return 0;
+}
+
+static int setup_fec(void)
+{
+	return set_clk_enet(ENET_125MHZ);
+}
+
+int board_phy_config(struct phy_device *phydev)
+{
+	if (phydev->drv->config)
+		phydev->drv->config(phydev);
+
+	return 0;
+}
+
+static int setup_eqos(void)
+{
+	struct blk_ctrl_wakeupmix_regs *bctrl =
+		(struct blk_ctrl_wakeupmix_regs *)BLK_CTRL_WAKEUPMIX_BASE_ADDR;
+
+	/* set INTF as RGMII, enable RGMII TXC clock */
+	clrsetbits_le32(&bctrl->eqos_gpr,
+			BCTRL_GPR_ENET_QOS_INTF_MODE_MASK,
+			BCTRL_GPR_ENET_QOS_INTF_SEL_RGMII | BCTRL_GPR_ENET_QOS_CLK_GEN_EN);
+
+	return set_clk_eqos(ENET_125MHZ);
+
+	return 0;
+}
+
+int board_init(void)
+{
+	if (IS_ENABLED(CONFIG_FEC_MXC))
+		setup_fec();
+
+	if (IS_ENABLED(CONFIG_DWC_ETH_QOS))
+		setup_eqos();
+
+	return 0;
+}
+
+int board_late_init(void)
+{
+	env_set("sec_boot", "no");
+	if (IS_ENABLED(CONFIG_AHAB_BOOT))
+		env_set("sec_boot", "yes");
+
+	return 0;
+}
diff --git a/board/phytec/imx93_phycore/imx93_phycore.env b/board/phytec/imx93_phycore/imx93_phycore.env
new file mode 100644
index 00000000000..75f28459b77
--- /dev/null
+++ b/board/phytec/imx93_phycore/imx93_phycore.env
@@ -0,0 +1,96 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+
+image=Image
+console=ttyLP0
+fdt_addr=0x83000000
+fdto_addr=0x830c0000
+bootenv_addr=0x83500000
+fdt_file=CONFIG_DEFAULT_FDT_FILE
+ipaddr=192.168.3.11
+serverip=192.168.3.10
+netmask=255.255.255.0
+ip_dyn=no
+bootenv=bootenv.txt
+mmc_load_bootenv=fatload mmc ${mmcdev}:${mmcpart} ${bootenv_addr} ${bootenv}
+mmcdev=__stringify(CONFIG_SYS_MMC_ENV_DEV)
+mmcpart=1
+mmcroot=2
+mmcautodetect=yes
+mmcargs=setenv bootargs console=${console},${baudrate} earlycon
+	root=/dev/mmcblk${mmcdev}p${mmcroot} rootwait rw
+loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}
+loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}
+mmc_load_overlay=fatload mmc ${mmcdev}:${mmcpart} ${fdto_addr} ${overlay}
+mmc_apply_overlays=
+	fdt address ${fdt_addr};
+	for overlay in ${overlays};
+	do;
+		if run mmc_load_overlay; then
+			fdt resize ${filesize};
+			fdt apply ${fdto_addr};
+		fi;
+	done;
+mmcboot=
+	echo Booting from mmc ...;
+	if run mmc_load_bootenv; then
+		env import -t ${bootenv_addr} ${filesize};
+	fi;
+	run mmcargs;
+	if run loadfdt; then
+		run mmc_apply_overlays;
+		booti ${loadaddr} - ${fdt_addr};
+	else
+		echo WARN: Cannot load the DT;
+	fi;
+nfsroot=/nfs
+netargs=setenv bootargs console=${console},${baudrate} earlycon
+	root=/dev/nfs ip=${nfsip} nfsroot=${serverip}:${nfsroot},v3,tcp
+net_load_bootenv=${get_cmd} ${bootenv_addr} ${bootenv}
+net_load_overlay=${get_cmd} ${fdto_addr} ${overlay}
+net_apply_overlays=
+	fdt address ${fdt_addr};
+	for overlay in ${overlays};
+	do;
+		if run net_load_overlay; then
+			fdt resize ${filesize};
+			fdt apply ${fdto_addr};
+		fi;
+	done;
+netboot=
+	echo Booting from net ...;
+	if test ${ip_dyn} = yes; then
+		setenv nfsip dhcp;
+		setenv get_cmd dhcp;
+	else
+		setenv nfsip ${ipaddr}:${serverip}::${netmask}::eth0:on;
+		setenv get_cmd tftp;
+	fi;
+	if run net_load_bootenv; then
+		env import -t ${bootenv_addr} ${filesize};
+	fi;
+	run netargs;
+	${get_cmd} ${loadaddr} ${image};
+	if ${get_cmd} ${fdt_addr} ${fdt_file}; then
+		run net_apply_overlays;
+		booti ${loadaddr} - ${fdt_addr};
+	else
+		echo WARN: Cannot load the DT;
+	fi;
+bsp_bootcmd=echo Running BSP bootcmd ...;
+        mmc dev ${mmcdev}; if mmc rescan; then
+          if run loadbootscript; then
+          run bootscript;
+          else
+          if test ${sec_boot} = yes; then
+                   if run loadcntr; then
+                          run mmcboot;
+                   else run netboot;
+                   fi;
+            else
+                   if run loadimage; then
+                           run mmcboot;
+                   else run netboot;
+                   fi;
+                fi;
+          fi;
+         fi;
\ No newline at end of file
diff --git a/board/phytec/imx93_phycore/lpddr4_timing_1GB.c b/board/phytec/imx93_phycore/lpddr4_timing_1GB.c
new file mode 100644
index 00000000000..2111972a40e
--- /dev/null
+++ b/board/phytec/imx93_phycore/lpddr4_timing_1GB.c
@@ -0,0 +1,1546 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2023 NXP
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Christoph Stoidner <c.stoidner at phytec.de>
+ *
+ * Code generated with DDR Tool v1.0.0.
+ */
+
+#include <linux/kernel.h>
+#include <asm/arch/ddr.h>
+
+static struct dram_cfg_param ddr_ddrc_cfg[] = {
+	/** Initialize DDRC registers **/
+	{0x4e300110, 0x44100001},
+	{0x4e300000, 0x8000bf},
+	{0x4e300008, 0x0},
+	{0x4e300080, 0x80000412},
+	{0x4e300084, 0x0},
+	{0x4e300114, 0x1002},
+	{0x4e300260, 0x4080},
+	{0x4e300f04, 0x80},
+	{0x4e300800, 0x43b30002},
+	{0x4e300804, 0x1f1f1f1f},
+	{0x4e301000, 0x0},
+	{0x4e301240, 0x0},
+	{0x4e301244, 0x0},
+	{0x4e301248, 0x0},
+	{0x4e30124c, 0x0},
+	{0x4e301250, 0x0},
+	{0x4e301254, 0x0},
+	{0x4e301258, 0x0},
+	{0x4e30125c, 0x0},
+
+};
+
+/* dram fsp cfg */
+static struct dram_fsp_cfg ddr_dram_fsp_cfg[] = {
+	{
+		{
+			{0x4e300100, 0x24A0421B},
+			{0x4e300104, 0xF8EE001B},
+			{0x4e300108, 0x2F263233},
+			{0x4e30010C, 0x0005E18B},
+			{0x4e300124, 0x1C770000},
+			{0x4e300160, 0x00009102},
+			{0x4e30016C, 0x35F00000},
+			{0x4e300170, 0x8B0B0608},
+			{0x4e300250, 0x00000028},
+			{0x4e300254, 0x00FE00FE},
+			{0x4e300258, 0x00000008},
+			{0x4e30025C, 0x00000400},
+			{0x4e300300, 0x224F2215},
+			{0x4e300304, 0x00FE2213},
+			{0x4e300308, 0x0A3C0E3C},
+		},
+		{
+			{0x01, 0xE4},
+			{0x02, 0x36},
+			{0x03, 0xF2},
+			{0x0b, 0x46},
+			{0x0c, 0x11},
+			{0x0e, 0x11},
+			{0x16, 0x04},
+		},
+		0,
+	},
+
+};
+
+/* PHY Initialize Configuration */
+static struct dram_cfg_param ddr_ddrphy_cfg[] = {
+	{0x100a0, 0x0},
+	{0x100a1, 0x1},
+	{0x100a2, 0x2},
+	{0x100a3, 0x3},
+	{0x100a4, 0x4},
+	{0x100a5, 0x5},
+	{0x100a6, 0x6},
+	{0x100a7, 0x7},
+	{0x110a0, 0x0},
+	{0x110a1, 0x1},
+	{0x110a2, 0x2},
+	{0x110a3, 0x3},
+	{0x110a4, 0x4},
+	{0x110a5, 0x5},
+	{0x110a6, 0x6},
+	{0x110a7, 0x7},
+	{0x1005f, 0x5ff},
+	{0x1015f, 0x5ff},
+	{0x1105f, 0x5ff},
+	{0x1115f, 0x5ff},
+	{0x55, 0x1ff},
+	{0x1055, 0x1ff},
+	{0x2055, 0x1ff},
+	{0x200c5, 0x19},
+	{0x2002e, 0x2},
+	{0x90204, 0x0},
+	{0x20024, 0x1e3},
+	{0x2003a, 0x2},
+	{0x2007d, 0x212},
+	{0x2007c, 0x61},
+	{0x20056, 0x3},
+	{0x1004d, 0x600},
+	{0x1014d, 0x600},
+	{0x1104d, 0x600},
+	{0x1114d, 0x600},
+	{0x10049, 0xe00},
+	{0x10149, 0xe00},
+	{0x11049, 0xe00},
+	{0x11149, 0xe00},
+	{0x43, 0x60},
+	{0x1043, 0x60},
+	{0x2043, 0x60},
+	{0x20018, 0x1},
+	{0x20075, 0x4},
+	{0x20050, 0x0},
+	{0x2009b, 0x2},
+	{0x20008, 0x3a5},
+	{0x20088, 0x9},
+	{0x200b2, 0x10c},
+	{0x10043, 0x5a1},
+	{0x10143, 0x5a1},
+	{0x11043, 0x5a1},
+	{0x11143, 0x5a1},
+	{0x200fa, 0x2},
+	{0x20019, 0x1},
+	{0x200f0, 0x600},
+	{0x200f1, 0x0},
+	{0x200f2, 0x4444},
+	{0x200f3, 0x8888},
+	{0x200f4, 0x5655},
+	{0x200f5, 0x0},
+	{0x200f6, 0x0},
+	{0x200f7, 0xf000},
+	{0x20025, 0x0},
+	{0x2002d, 0x1},
+	{0x2002c, 0x0},
+	{0x20021, 0x0},
+	{0x200c7, 0x21},
+	{0x1200c7, 0x21},
+	{0x200ca, 0x24},
+	{0x1200ca, 0x24},
+
+};
+
+/* ddr phy trained csr */
+static struct dram_cfg_param ddr_ddrphy_trained_csr[] = {
+	{0x1005f, 0x0},
+	{0x1015f, 0x0},
+	{0x1105f, 0x0},
+	{0x1115f, 0x0},
+	{0x55, 0x0},
+	{0x1055, 0x0},
+	{0x2055, 0x0},
+	{0x200c5, 0x0},
+	{0x2002e, 0x0},
+	{0x90204, 0x0},
+	{0x20024, 0x0},
+	{0x2003a, 0x0},
+	{0x2007d, 0x0},
+	{0x2007c, 0x0},
+	{0x20056, 0x0},
+	{0x1004d, 0x0},
+	{0x1014d, 0x0},
+	{0x1104d, 0x0},
+	{0x1114d, 0x0},
+	{0x10049, 0x0},
+	{0x10149, 0x0},
+	{0x11049, 0x0},
+	{0x11149, 0x0},
+	{0x43, 0x0},
+	{0x1043, 0x0},
+	{0x2043, 0x0},
+	{0x20018, 0x0},
+	{0x20075, 0x0},
+	{0x20050, 0x0},
+	{0x2009b, 0x0},
+	{0x20008, 0x0},
+	{0x20088, 0x0},
+	{0x200b2, 0x0},
+	{0x10043, 0x0},
+	{0x10143, 0x0},
+	{0x11043, 0x0},
+	{0x11143, 0x0},
+	{0x200fa, 0x0},
+	{0x20019, 0x0},
+	{0x200f0, 0x0},
+	{0x200f1, 0x0},
+	{0x200f2, 0x0},
+	{0x200f3, 0x0},
+	{0x200f4, 0x0},
+	{0x200f5, 0x0},
+	{0x200f6, 0x0},
+	{0x200f7, 0x0},
+	{0x20025, 0x0},
+	{0x2002d, 0x0},
+	{0x2002c, 0x0},
+	{0xd0000, 0x0},
+	{0x90000, 0x0},
+	{0x90001, 0x0},
+	{0x90002, 0x0},
+	{0x90003, 0x0},
+	{0x90004, 0x0},
+	{0x90005, 0x0},
+	{0x90029, 0x0},
+	{0x9002a, 0x0},
+	{0x9002b, 0x0},
+	{0x9002c, 0x0},
+	{0x9002d, 0x0},
+	{0x9002e, 0x0},
+	{0x9002f, 0x0},
+	{0x90030, 0x0},
+	{0x90031, 0x0},
+	{0x90032, 0x0},
+	{0x90033, 0x0},
+	{0x90034, 0x0},
+	{0x90035, 0x0},
+	{0x90036, 0x0},
+	{0x90037, 0x0},
+	{0x90038, 0x0},
+	{0x90039, 0x0},
+	{0x9003a, 0x0},
+	{0x9003b, 0x0},
+	{0x9003c, 0x0},
+	{0x9003d, 0x0},
+	{0x9003e, 0x0},
+	{0x9003f, 0x0},
+	{0x90040, 0x0},
+	{0x90041, 0x0},
+	{0x90042, 0x0},
+	{0x90043, 0x0},
+	{0x90044, 0x0},
+	{0x90045, 0x0},
+	{0x90046, 0x0},
+	{0x90047, 0x0},
+	{0x90048, 0x0},
+	{0x90049, 0x0},
+	{0x9004a, 0x0},
+	{0x9004b, 0x0},
+	{0x9004c, 0x0},
+	{0x9004d, 0x0},
+	{0x9004e, 0x0},
+	{0x9004f, 0x0},
+	{0x90050, 0x0},
+	{0x90051, 0x0},
+	{0x90052, 0x0},
+	{0x90053, 0x0},
+	{0x90054, 0x0},
+	{0x90055, 0x0},
+	{0x90056, 0x0},
+	{0x90057, 0x0},
+	{0x90058, 0x0},
+	{0x90059, 0x0},
+	{0x9005a, 0x0},
+	{0x9005b, 0x0},
+	{0x9005c, 0x0},
+	{0x9005d, 0x0},
+	{0x9005e, 0x0},
+	{0x9005f, 0x0},
+	{0x90060, 0x0},
+	{0x90061, 0x0},
+	{0x90062, 0x0},
+	{0x90063, 0x0},
+	{0x90064, 0x0},
+	{0x90065, 0x0},
+	{0x90066, 0x0},
+	{0x90067, 0x0},
+	{0x90068, 0x0},
+	{0x90069, 0x0},
+	{0x9006a, 0x0},
+	{0x9006b, 0x0},
+	{0x9006c, 0x0},
+	{0x9006d, 0x0},
+	{0x9006e, 0x0},
+	{0x9006f, 0x0},
+	{0x90070, 0x0},
+	{0x90071, 0x0},
+	{0x90072, 0x0},
+	{0x90073, 0x0},
+	{0x90074, 0x0},
+	{0x90075, 0x0},
+	{0x90076, 0x0},
+	{0x90077, 0x0},
+	{0x90078, 0x0},
+	{0x90079, 0x0},
+	{0x9007a, 0x0},
+	{0x9007b, 0x0},
+	{0x9007c, 0x0},
+	{0x9007d, 0x0},
+	{0x9007e, 0x0},
+	{0x9007f, 0x0},
+	{0x90080, 0x0},
+	{0x90081, 0x0},
+	{0x90082, 0x0},
+	{0x90083, 0x0},
+	{0x90084, 0x0},
+	{0x90085, 0x0},
+	{0x90086, 0x0},
+	{0x90087, 0x0},
+	{0x90088, 0x0},
+	{0x90089, 0x0},
+	{0x9008a, 0x0},
+	{0x9008b, 0x0},
+	{0x9008c, 0x0},
+	{0x9008d, 0x0},
+	{0x9008e, 0x0},
+	{0x9008f, 0x0},
+	{0x90090, 0x0},
+	{0x90091, 0x0},
+	{0x90092, 0x0},
+	{0x90093, 0x0},
+	{0x90094, 0x0},
+	{0x90095, 0x0},
+	{0x90096, 0x0},
+	{0x90097, 0x0},
+	{0x90098, 0x0},
+	{0x90099, 0x0},
+	{0x9009a, 0x0},
+	{0x9009b, 0x0},
+	{0x9009c, 0x0},
+	{0x9009d, 0x0},
+	{0x9009e, 0x0},
+	{0x9009f, 0x0},
+	{0x900a0, 0x0},
+	{0x900a1, 0x0},
+	{0x900a2, 0x0},
+	{0x900a3, 0x0},
+	{0x900a4, 0x0},
+	{0x900a5, 0x0},
+	{0x900a6, 0x0},
+	{0x900a7, 0x0},
+	{0x900a8, 0x0},
+	{0x900a9, 0x0},
+	{0x40000, 0x0},
+	{0x40020, 0x0},
+	{0x40040, 0x0},
+	{0x40060, 0x0},
+	{0x40001, 0x0},
+	{0x40021, 0x0},
+	{0x40041, 0x0},
+	{0x40061, 0x0},
+	{0x40002, 0x0},
+	{0x40022, 0x0},
+	{0x40042, 0x0},
+	{0x40062, 0x0},
+	{0x40003, 0x0},
+	{0x40023, 0x0},
+	{0x40043, 0x0},
+	{0x40063, 0x0},
+	{0x40004, 0x0},
+	{0x40024, 0x0},
+	{0x40044, 0x0},
+	{0x40064, 0x0},
+	{0x40005, 0x0},
+	{0x40025, 0x0},
+	{0x40045, 0x0},
+	{0x40065, 0x0},
+	{0x40006, 0x0},
+	{0x40026, 0x0},
+	{0x40046, 0x0},
+	{0x40066, 0x0},
+	{0x40007, 0x0},
+	{0x40027, 0x0},
+	{0x40047, 0x0},
+	{0x40067, 0x0},
+	{0x40008, 0x0},
+	{0x40028, 0x0},
+	{0x40048, 0x0},
+	{0x40068, 0x0},
+	{0x40009, 0x0},
+	{0x40029, 0x0},
+	{0x40049, 0x0},
+	{0x40069, 0x0},
+	{0x4000a, 0x0},
+	{0x4002a, 0x0},
+	{0x4004a, 0x0},
+	{0x4006a, 0x0},
+	{0x4000b, 0x0},
+	{0x4002b, 0x0},
+	{0x4004b, 0x0},
+	{0x4006b, 0x0},
+	{0x4000c, 0x0},
+	{0x4002c, 0x0},
+	{0x4004c, 0x0},
+	{0x4006c, 0x0},
+	{0x4000d, 0x0},
+	{0x4002d, 0x0},
+	{0x4004d, 0x0},
+	{0x4006d, 0x0},
+	{0x4000e, 0x0},
+	{0x4002e, 0x0},
+	{0x4004e, 0x0},
+	{0x4006e, 0x0},
+	{0x4000f, 0x0},
+	{0x4002f, 0x0},
+	{0x4004f, 0x0},
+	{0x4006f, 0x0},
+	{0x40010, 0x0},
+	{0x40030, 0x0},
+	{0x40050, 0x0},
+	{0x40070, 0x0},
+	{0x40011, 0x0},
+	{0x40031, 0x0},
+	{0x40051, 0x0},
+	{0x40071, 0x0},
+	{0x40012, 0x0},
+	{0x40032, 0x0},
+	{0x40052, 0x0},
+	{0x40072, 0x0},
+	{0x40013, 0x0},
+	{0x40033, 0x0},
+	{0x40053, 0x0},
+	{0x40073, 0x0},
+	{0x40014, 0x0},
+	{0x40034, 0x0},
+	{0x40054, 0x0},
+	{0x40074, 0x0},
+	{0x40015, 0x0},
+	{0x40035, 0x0},
+	{0x40055, 0x0},
+	{0x40075, 0x0},
+	{0x40016, 0x0},
+	{0x40036, 0x0},
+	{0x40056, 0x0},
+	{0x40076, 0x0},
+	{0x40017, 0x0},
+	{0x40037, 0x0},
+	{0x40057, 0x0},
+	{0x40077, 0x0},
+	{0x40018, 0x0},
+	{0x40038, 0x0},
+	{0x40058, 0x0},
+	{0x40078, 0x0},
+	{0x40019, 0x0},
+	{0x40039, 0x0},
+	{0x40059, 0x0},
+	{0x40079, 0x0},
+	{0x4001a, 0x0},
+	{0x4003a, 0x0},
+	{0x4005a, 0x0},
+	{0x4007a, 0x0},
+	{0x900aa, 0x0},
+	{0x900ab, 0x0},
+	{0x900ac, 0x0},
+	{0x900ad, 0x0},
+	{0x900ae, 0x0},
+	{0x900af, 0x0},
+	{0x900b0, 0x0},
+	{0x900b1, 0x0},
+	{0x900b2, 0x0},
+	{0x900b3, 0x0},
+	{0x900b4, 0x0},
+	{0x900b5, 0x0},
+	{0x900b6, 0x0},
+	{0x900b7, 0x0},
+	{0x900b8, 0x0},
+	{0x900b9, 0x0},
+	{0x900ba, 0x0},
+	{0x900bb, 0x0},
+	{0x900bc, 0x0},
+	{0x900bd, 0x0},
+	{0x900be, 0x0},
+	{0x900bf, 0x0},
+	{0x900c0, 0x0},
+	{0x900c1, 0x0},
+	{0x900c2, 0x0},
+	{0x900c3, 0x0},
+	{0x900c4, 0x0},
+	{0x900c5, 0x0},
+	{0x900c6, 0x0},
+	{0x900c7, 0x0},
+	{0x900c8, 0x0},
+	{0x900c9, 0x0},
+	{0x900ca, 0x0},
+	{0x900cb, 0x0},
+	{0x900cc, 0x0},
+	{0x900cd, 0x0},
+	{0x900ce, 0x0},
+	{0x900cf, 0x0},
+	{0x900d0, 0x0},
+	{0x900d1, 0x0},
+	{0x900d2, 0x0},
+	{0x900d3, 0x0},
+	{0x900d4, 0x0},
+	{0x900d5, 0x0},
+	{0x900d6, 0x0},
+	{0x900d7, 0x0},
+	{0x900d8, 0x0},
+	{0x900d9, 0x0},
+	{0x900da, 0x0},
+	{0x900db, 0x0},
+	{0x900dc, 0x0},
+	{0x900dd, 0x0},
+	{0x900de, 0x0},
+	{0x900df, 0x0},
+	{0x900e0, 0x0},
+	{0x900e1, 0x0},
+	{0x900e2, 0x0},
+	{0x900e3, 0x0},
+	{0x900e4, 0x0},
+	{0x900e5, 0x0},
+	{0x900e6, 0x0},
+	{0x900e7, 0x0},
+	{0x900e8, 0x0},
+	{0x900e9, 0x0},
+	{0x900ea, 0x0},
+	{0x900eb, 0x0},
+	{0x900ec, 0x0},
+	{0x900ed, 0x0},
+	{0x900ee, 0x0},
+	{0x900ef, 0x0},
+	{0x900f0, 0x0},
+	{0x900f1, 0x0},
+	{0x900f2, 0x0},
+	{0x900f3, 0x0},
+	{0x900f4, 0x0},
+	{0x900f5, 0x0},
+	{0x900f6, 0x0},
+	{0x900f7, 0x0},
+	{0x900f8, 0x0},
+	{0x900f9, 0x0},
+	{0x900fa, 0x0},
+	{0x900fb, 0x0},
+	{0x900fc, 0x0},
+	{0x900fd, 0x0},
+	{0x900fe, 0x0},
+	{0x900ff, 0x0},
+	{0x90100, 0x0},
+	{0x90101, 0x0},
+	{0x90102, 0x0},
+	{0x90103, 0x0},
+	{0x90104, 0x0},
+	{0x90105, 0x0},
+	{0x90106, 0x0},
+	{0x90107, 0x0},
+	{0x90108, 0x0},
+	{0x90109, 0x0},
+	{0x9010a, 0x0},
+	{0x9010b, 0x0},
+	{0x9010c, 0x0},
+	{0x9010d, 0x0},
+	{0x9010e, 0x0},
+	{0x9010f, 0x0},
+	{0x90110, 0x0},
+	{0x90111, 0x0},
+	{0x90112, 0x0},
+	{0x90113, 0x0},
+	{0x90114, 0x0},
+	{0x90115, 0x0},
+	{0x90116, 0x0},
+	{0x90117, 0x0},
+	{0x90118, 0x0},
+	{0x90119, 0x0},
+	{0x9011a, 0x0},
+	{0x9011b, 0x0},
+	{0x9011c, 0x0},
+	{0x9011d, 0x0},
+	{0x9011e, 0x0},
+	{0x9011f, 0x0},
+	{0x90120, 0x0},
+	{0x90121, 0x0},
+	{0x90122, 0x0},
+	{0x90123, 0x0},
+	{0x90124, 0x0},
+	{0x90125, 0x0},
+	{0x90126, 0x0},
+	{0x90127, 0x0},
+	{0x90128, 0x0},
+	{0x90129, 0x0},
+	{0x9012a, 0x0},
+	{0x9012b, 0x0},
+	{0x9012c, 0x0},
+	{0x9012d, 0x0},
+	{0x9012e, 0x0},
+	{0x9012f, 0x0},
+	{0x90130, 0x0},
+	{0x90131, 0x0},
+	{0x90132, 0x0},
+	{0x90133, 0x0},
+	{0x90134, 0x0},
+	{0x90135, 0x0},
+	{0x90136, 0x0},
+	{0x90137, 0x0},
+	{0x90138, 0x0},
+	{0x90139, 0x0},
+	{0x9013a, 0x0},
+	{0x9013b, 0x0},
+	{0x9013c, 0x0},
+	{0x9013d, 0x0},
+	{0x9013e, 0x0},
+	{0x9013f, 0x0},
+	{0x90140, 0x0},
+	{0x90141, 0x0},
+	{0x90142, 0x0},
+	{0x90143, 0x0},
+	{0x90144, 0x0},
+	{0x90145, 0x0},
+	{0x90146, 0x0},
+	{0x90147, 0x0},
+	{0x90148, 0x0},
+	{0x90149, 0x0},
+	{0x9014a, 0x0},
+	{0x9014b, 0x0},
+	{0x9014c, 0x0},
+	{0x9014d, 0x0},
+	{0x9014e, 0x0},
+	{0x9014f, 0x0},
+	{0x90150, 0x0},
+	{0x90151, 0x0},
+	{0x90152, 0x0},
+	{0x90153, 0x0},
+	{0x90154, 0x0},
+	{0x90155, 0x0},
+	{0x90156, 0x0},
+	{0x90157, 0x0},
+	{0x90158, 0x0},
+	{0x90159, 0x0},
+	{0x9015a, 0x0},
+	{0x9015b, 0x0},
+	{0x9015c, 0x0},
+	{0x9015d, 0x0},
+	{0x9015e, 0x0},
+	{0x9015f, 0x0},
+	{0x90160, 0x0},
+	{0x90161, 0x0},
+	{0x90162, 0x0},
+	{0x90163, 0x0},
+	{0x90164, 0x0},
+	{0x90165, 0x0},
+	{0x90166, 0x0},
+	{0x90167, 0x0},
+	{0x90168, 0x0},
+	{0x90169, 0x0},
+	{0x9016a, 0x0},
+	{0x9016b, 0x0},
+	{0x9016c, 0x0},
+	{0x9016d, 0x0},
+	{0x9016e, 0x0},
+	{0x9016f, 0x0},
+	{0x90170, 0x0},
+	{0x90171, 0x0},
+	{0x90172, 0x0},
+	{0x90173, 0x0},
+	{0x90174, 0x0},
+	{0x90175, 0x0},
+	{0x90176, 0x0},
+	{0x90177, 0x0},
+	{0x90178, 0x0},
+	{0x90179, 0x0},
+	{0x9017a, 0x0},
+	{0x9017b, 0x0},
+	{0x9017c, 0x0},
+	{0x9017d, 0x0},
+	{0x9017e, 0x0},
+	{0x9017f, 0x0},
+	{0x90180, 0x0},
+	{0x90181, 0x0},
+	{0x90182, 0x0},
+	{0x90183, 0x0},
+	{0x90184, 0x0},
+	{0x90006, 0x0},
+	{0x90007, 0x0},
+	{0x90008, 0x0},
+	{0x90009, 0x0},
+	{0x9000a, 0x0},
+	{0x9000b, 0x0},
+	{0xd00e7, 0x0},
+	{0x90017, 0x0},
+	{0x9001f, 0x0},
+	{0x90026, 0x0},
+	{0x400d0, 0x0},
+	{0x400d1, 0x0},
+	{0x400d2, 0x0},
+	{0x400d3, 0x0},
+	{0x400d4, 0x0},
+	{0x400d5, 0x0},
+	{0x400d6, 0x0},
+	{0x400d7, 0x0},
+	{0x200be, 0x0},
+	{0x2000b, 0x0},
+	{0x2000c, 0x0},
+	{0x2000d, 0x0},
+	{0x2000e, 0x0},
+	{0x9000c, 0x0},
+	{0x9000d, 0x0},
+	{0x9000e, 0x0},
+	{0x9000f, 0x0},
+	{0x90010, 0x0},
+	{0x90011, 0x0},
+	{0x90012, 0x0},
+	{0x90013, 0x0},
+	{0x20010, 0x0},
+	{0x20011, 0x0},
+	{0x40080, 0x0},
+	{0x40081, 0x0},
+	{0x40082, 0x0},
+	{0x40083, 0x0},
+	{0x40084, 0x0},
+	{0x40085, 0x0},
+	{0x400fd, 0x0},
+	{0x400f1, 0x0},
+	{0x10011, 0x0},
+	{0x10012, 0x0},
+	{0x10013, 0x0},
+	{0x10018, 0x0},
+	{0x10002, 0x0},
+	{0x100b2, 0x0},
+	{0x101b4, 0x0},
+	{0x102b4, 0x0},
+	{0x103b4, 0x0},
+	{0x104b4, 0x0},
+	{0x105b4, 0x0},
+	{0x106b4, 0x0},
+	{0x107b4, 0x0},
+	{0x108b4, 0x0},
+	{0x11011, 0x0},
+	{0x11012, 0x0},
+	{0x11013, 0x0},
+	{0x11018, 0x0},
+	{0x11002, 0x0},
+	{0x110b2, 0x0},
+	{0x111b4, 0x0},
+	{0x112b4, 0x0},
+	{0x113b4, 0x0},
+	{0x114b4, 0x0},
+	{0x115b4, 0x0},
+	{0x116b4, 0x0},
+	{0x117b4, 0x0},
+	{0x118b4, 0x0},
+	{0x20089, 0x0},
+	{0xc0080, 0x0},
+	{0x200cb, 0x0},
+	{0x10068, 0x0},
+	{0x10069, 0x0},
+	{0x10168, 0x0},
+	{0x10169, 0x0},
+	{0x10268, 0x0},
+	{0x10269, 0x0},
+	{0x10368, 0x0},
+	{0x10369, 0x0},
+	{0x10468, 0x0},
+	{0x10469, 0x0},
+	{0x10568, 0x0},
+	{0x10569, 0x0},
+	{0x10668, 0x0},
+	{0x10669, 0x0},
+	{0x10768, 0x0},
+	{0x10769, 0x0},
+	{0x10868, 0x0},
+	{0x10869, 0x0},
+	{0x100aa, 0x0},
+	{0x10062, 0x0},
+	{0x10001, 0x0},
+	{0x100a0, 0x0},
+	{0x100a1, 0x0},
+	{0x100a2, 0x0},
+	{0x100a3, 0x0},
+	{0x100a4, 0x0},
+	{0x100a5, 0x0},
+	{0x100a6, 0x0},
+	{0x100a7, 0x0},
+	{0x11068, 0x0},
+	{0x11069, 0x0},
+	{0x11168, 0x0},
+	{0x11169, 0x0},
+	{0x11268, 0x0},
+	{0x11269, 0x0},
+	{0x11368, 0x0},
+	{0x11369, 0x0},
+	{0x11468, 0x0},
+	{0x11469, 0x0},
+	{0x11568, 0x0},
+	{0x11569, 0x0},
+	{0x11668, 0x0},
+	{0x11669, 0x0},
+	{0x11768, 0x0},
+	{0x11769, 0x0},
+	{0x11868, 0x0},
+	{0x11869, 0x0},
+	{0x110aa, 0x0},
+	{0x11062, 0x0},
+	{0x11001, 0x0},
+	{0x110a0, 0x0},
+	{0x110a1, 0x0},
+	{0x110a2, 0x0},
+	{0x110a3, 0x0},
+	{0x110a4, 0x0},
+	{0x110a5, 0x0},
+	{0x110a6, 0x0},
+	{0x110a7, 0x0},
+	{0x80, 0x0},
+	{0x1080, 0x0},
+	{0x2080, 0x0},
+	{0x10020, 0x0},
+	{0x10080, 0x0},
+	{0x10081, 0x0},
+	{0x100d0, 0x0},
+	{0x100d1, 0x0},
+	{0x1008c, 0x0},
+	{0x1008d, 0x0},
+	{0x10180, 0x0},
+	{0x10181, 0x0},
+	{0x101d0, 0x0},
+	{0x101d1, 0x0},
+	{0x1018c, 0x0},
+	{0x1018d, 0x0},
+	{0x100c0, 0x0},
+	{0x100c1, 0x0},
+	{0x101c0, 0x0},
+	{0x101c1, 0x0},
+	{0x102c0, 0x0},
+	{0x102c1, 0x0},
+	{0x103c0, 0x0},
+	{0x103c1, 0x0},
+	{0x104c0, 0x0},
+	{0x104c1, 0x0},
+	{0x105c0, 0x0},
+	{0x105c1, 0x0},
+	{0x106c0, 0x0},
+	{0x106c1, 0x0},
+	{0x107c0, 0x0},
+	{0x107c1, 0x0},
+	{0x108c0, 0x0},
+	{0x108c1, 0x0},
+	{0x100ae, 0x0},
+	{0x100af, 0x0},
+	{0x11020, 0x0},
+	{0x11080, 0x0},
+	{0x11081, 0x0},
+	{0x110d0, 0x0},
+	{0x110d1, 0x0},
+	{0x1108c, 0x0},
+	{0x1108d, 0x0},
+	{0x11180, 0x0},
+	{0x11181, 0x0},
+	{0x111d0, 0x0},
+	{0x111d1, 0x0},
+	{0x1118c, 0x0},
+	{0x1118d, 0x0},
+	{0x110c0, 0x0},
+	{0x110c1, 0x0},
+	{0x111c0, 0x0},
+	{0x111c1, 0x0},
+	{0x112c0, 0x0},
+	{0x112c1, 0x0},
+	{0x113c0, 0x0},
+	{0x113c1, 0x0},
+	{0x114c0, 0x0},
+	{0x114c1, 0x0},
+	{0x115c0, 0x0},
+	{0x115c1, 0x0},
+	{0x116c0, 0x0},
+	{0x116c1, 0x0},
+	{0x117c0, 0x0},
+	{0x117c1, 0x0},
+	{0x118c0, 0x0},
+	{0x118c1, 0x0},
+	{0x110ae, 0x0},
+	{0x110af, 0x0},
+	{0x90201, 0x0},
+	{0x90202, 0x0},
+	{0x90203, 0x0},
+	{0x90205, 0x0},
+	{0x90206, 0x0},
+	{0x90207, 0x0},
+	{0x90208, 0x0},
+	{0x20020, 0x0},
+	{0x20077, 0x0},
+	{0x20072, 0x0},
+	{0x20073, 0x0},
+	{0x400c0, 0x0},
+	{0x10040, 0x0},
+	{0x10140, 0x0},
+	{0x10240, 0x0},
+	{0x10340, 0x0},
+	{0x10440, 0x0},
+	{0x10540, 0x0},
+	{0x10640, 0x0},
+	{0x10740, 0x0},
+	{0x10840, 0x0},
+	{0x11040, 0x0},
+	{0x11140, 0x0},
+	{0x11240, 0x0},
+	{0x11340, 0x0},
+	{0x11440, 0x0},
+	{0x11540, 0x0},
+	{0x11640, 0x0},
+	{0x11740, 0x0},
+	{0x11840, 0x0},
+
+};
+
+/* P0 message block parameter for training firmware */
+static struct dram_cfg_param ddr_fsp0_cfg[] = {
+	{0xd0000, 0x0},
+	{0x54003, 0xe94},
+	{0x54004, 0x4},
+	{0x54006, 0x15},
+	{0x54008, 0x131f},
+	{0x54009, 0xc8},
+	{0x5400b, 0x4},
+	{0x5400d, 0x100},
+	{0x5400f, 0x100},
+	{0x54012, 0x110},
+	{0x54019, 0x36e4},
+	{0x5401a, 0xf2},
+	{0x5401b, 0x1146},
+	{0x5401c, 0x1108},
+	{0x5401e, 0x4},
+	{0x5401f, 0x36e4},
+	{0x54020, 0xf2},
+	{0x54021, 0x1146},
+	{0x54022, 0x1108},
+	{0x54024, 0x4},
+	{0x54032, 0xe400},
+	{0x54033, 0xf236},
+	{0x54034, 0x4600},
+	{0x54035, 0x811},
+	{0x54036, 0x11},
+	{0x54037, 0x400},
+	{0x54038, 0xe400},
+	{0x54039, 0xf236},
+	{0x5403a, 0x4600},
+	{0x5403b, 0x811},
+	{0x5403c, 0x11},
+	{0x5403d, 0x400},
+	{0xd0000, 0x1}
+};
+
+/* P0 2D message block parameter for training firmware */
+static struct dram_cfg_param ddr_fsp0_2d_cfg[] = {
+	{0xd0000, 0x0},
+	{0x54003, 0xe94},
+	{0x54004, 0x4},
+	{0x54006, 0x15},
+	{0x54008, 0x61},
+	{0x54009, 0xc8},
+	{0x5400b, 0x4},
+	{0x5400d, 0x100},
+	{0x5400f, 0x100},
+	{0x54010, 0x2080},
+	{0x54012, 0x110},
+	{0x54019, 0x36e4},
+	{0x5401a, 0xf2},
+	{0x5401b, 0x1146},
+	{0x5401c, 0x1108},
+	{0x5401e, 0x4},
+	{0x5401f, 0x36e4},
+	{0x54020, 0xf2},
+	{0x54021, 0x1146},
+	{0x54022, 0x1108},
+	{0x54024, 0x4},
+	{0x54032, 0xe400},
+	{0x54033, 0xf236},
+	{0x54034, 0x4600},
+	{0x54035, 0x811},
+	{0x54036, 0x11},
+	{0x54037, 0x400},
+	{0x54038, 0xe400},
+	{0x54039, 0xf236},
+	{0x5403a, 0x4600},
+	{0x5403b, 0x811},
+	{0x5403c, 0x11},
+	{0x5403d, 0x400},
+	{0xd0000, 0x1}
+};
+
+/* DRAM PHY init engine image */
+static struct dram_cfg_param ddr_phy_pie[] = {
+	{0xd0000, 0x0},
+	{0x90000, 0x10},
+	{0x90001, 0x400},
+	{0x90002, 0x10e},
+	{0x90003, 0x0},
+	{0x90004, 0x0},
+	{0x90005, 0x8},
+	{0x90029, 0xb},
+	{0x9002a, 0x480},
+	{0x9002b, 0x109},
+	{0x9002c, 0x8},
+	{0x9002d, 0x448},
+	{0x9002e, 0x139},
+	{0x9002f, 0x8},
+	{0x90030, 0x478},
+	{0x90031, 0x109},
+	{0x90032, 0x0},
+	{0x90033, 0xe8},
+	{0x90034, 0x109},
+	{0x90035, 0x2},
+	{0x90036, 0x10},
+	{0x90037, 0x139},
+	{0x90038, 0xb},
+	{0x90039, 0x7c0},
+	{0x9003a, 0x139},
+	{0x9003b, 0x44},
+	{0x9003c, 0x633},
+	{0x9003d, 0x159},
+	{0x9003e, 0x14f},
+	{0x9003f, 0x630},
+	{0x90040, 0x159},
+	{0x90041, 0x47},
+	{0x90042, 0x633},
+	{0x90043, 0x149},
+	{0x90044, 0x4f},
+	{0x90045, 0x633},
+	{0x90046, 0x179},
+	{0x90047, 0x8},
+	{0x90048, 0xe0},
+	{0x90049, 0x109},
+	{0x9004a, 0x0},
+	{0x9004b, 0x7c8},
+	{0x9004c, 0x109},
+	{0x9004d, 0x0},
+	{0x9004e, 0x1},
+	{0x9004f, 0x8},
+	{0x90050, 0x30},
+	{0x90051, 0x65a},
+	{0x90052, 0x9},
+	{0x90053, 0x0},
+	{0x90054, 0x45a},
+	{0x90055, 0x9},
+	{0x90056, 0x0},
+	{0x90057, 0x448},
+	{0x90058, 0x109},
+	{0x90059, 0x40},
+	{0x9005a, 0x633},
+	{0x9005b, 0x179},
+	{0x9005c, 0x1},
+	{0x9005d, 0x618},
+	{0x9005e, 0x109},
+	{0x9005f, 0x40c0},
+	{0x90060, 0x633},
+	{0x90061, 0x149},
+	{0x90062, 0x8},
+	{0x90063, 0x4},
+	{0x90064, 0x48},
+	{0x90065, 0x4040},
+	{0x90066, 0x633},
+	{0x90067, 0x149},
+	{0x90068, 0x0},
+	{0x90069, 0x4},
+	{0x9006a, 0x48},
+	{0x9006b, 0x40},
+	{0x9006c, 0x633},
+	{0x9006d, 0x149},
+	{0x9006e, 0x0},
+	{0x9006f, 0x658},
+	{0x90070, 0x109},
+	{0x90071, 0x10},
+	{0x90072, 0x4},
+	{0x90073, 0x18},
+	{0x90074, 0x0},
+	{0x90075, 0x4},
+	{0x90076, 0x78},
+	{0x90077, 0x549},
+	{0x90078, 0x633},
+	{0x90079, 0x159},
+	{0x9007a, 0xd49},
+	{0x9007b, 0x633},
+	{0x9007c, 0x159},
+	{0x9007d, 0x94a},
+	{0x9007e, 0x633},
+	{0x9007f, 0x159},
+	{0x90080, 0x441},
+	{0x90081, 0x633},
+	{0x90082, 0x149},
+	{0x90083, 0x42},
+	{0x90084, 0x633},
+	{0x90085, 0x149},
+	{0x90086, 0x1},
+	{0x90087, 0x633},
+	{0x90088, 0x149},
+	{0x90089, 0x0},
+	{0x9008a, 0xe0},
+	{0x9008b, 0x109},
+	{0x9008c, 0xa},
+	{0x9008d, 0x10},
+	{0x9008e, 0x109},
+	{0x9008f, 0x9},
+	{0x90090, 0x3c0},
+	{0x90091, 0x149},
+	{0x90092, 0x9},
+	{0x90093, 0x3c0},
+	{0x90094, 0x159},
+	{0x90095, 0x18},
+	{0x90096, 0x10},
+	{0x90097, 0x109},
+	{0x90098, 0x0},
+	{0x90099, 0x3c0},
+	{0x9009a, 0x109},
+	{0x9009b, 0x18},
+	{0x9009c, 0x4},
+	{0x9009d, 0x48},
+	{0x9009e, 0x18},
+	{0x9009f, 0x4},
+	{0x900a0, 0x58},
+	{0x900a1, 0xb},
+	{0x900a2, 0x10},
+	{0x900a3, 0x109},
+	{0x900a4, 0x1},
+	{0x900a5, 0x10},
+	{0x900a6, 0x109},
+	{0x900a7, 0x5},
+	{0x900a8, 0x7c0},
+	{0x900a9, 0x109},
+	{0x40000, 0x811},
+	{0x40020, 0x880},
+	{0x40040, 0x0},
+	{0x40060, 0x0},
+	{0x40001, 0x4008},
+	{0x40021, 0x83},
+	{0x40041, 0x4f},
+	{0x40061, 0x0},
+	{0x40002, 0x4040},
+	{0x40022, 0x83},
+	{0x40042, 0x51},
+	{0x40062, 0x0},
+	{0x40003, 0x811},
+	{0x40023, 0x880},
+	{0x40043, 0x0},
+	{0x40063, 0x0},
+	{0x40004, 0x720},
+	{0x40024, 0xf},
+	{0x40044, 0x1740},
+	{0x40064, 0x0},
+	{0x40005, 0x16},
+	{0x40025, 0x83},
+	{0x40045, 0x4b},
+	{0x40065, 0x0},
+	{0x40006, 0x716},
+	{0x40026, 0xf},
+	{0x40046, 0x2001},
+	{0x40066, 0x0},
+	{0x40007, 0x716},
+	{0x40027, 0xf},
+	{0x40047, 0x2800},
+	{0x40067, 0x0},
+	{0x40008, 0x716},
+	{0x40028, 0xf},
+	{0x40048, 0xf00},
+	{0x40068, 0x0},
+	{0x40009, 0x720},
+	{0x40029, 0xf},
+	{0x40049, 0x1400},
+	{0x40069, 0x0},
+	{0x4000a, 0xe08},
+	{0x4002a, 0xc15},
+	{0x4004a, 0x0},
+	{0x4006a, 0x0},
+	{0x4000b, 0x625},
+	{0x4002b, 0x15},
+	{0x4004b, 0x0},
+	{0x4006b, 0x0},
+	{0x4000c, 0x4028},
+	{0x4002c, 0x80},
+	{0x4004c, 0x0},
+	{0x4006c, 0x0},
+	{0x4000d, 0xe08},
+	{0x4002d, 0xc1a},
+	{0x4004d, 0x0},
+	{0x4006d, 0x0},
+	{0x4000e, 0x625},
+	{0x4002e, 0x1a},
+	{0x4004e, 0x0},
+	{0x4006e, 0x0},
+	{0x4000f, 0x4040},
+	{0x4002f, 0x80},
+	{0x4004f, 0x0},
+	{0x4006f, 0x0},
+	{0x40010, 0x2604},
+	{0x40030, 0x15},
+	{0x40050, 0x0},
+	{0x40070, 0x0},
+	{0x40011, 0x708},
+	{0x40031, 0x5},
+	{0x40051, 0x0},
+	{0x40071, 0x2002},
+	{0x40012, 0x8},
+	{0x40032, 0x80},
+	{0x40052, 0x0},
+	{0x40072, 0x0},
+	{0x40013, 0x2604},
+	{0x40033, 0x1a},
+	{0x40053, 0x0},
+	{0x40073, 0x0},
+	{0x40014, 0x708},
+	{0x40034, 0xa},
+	{0x40054, 0x0},
+	{0x40074, 0x2002},
+	{0x40015, 0x4040},
+	{0x40035, 0x80},
+	{0x40055, 0x0},
+	{0x40075, 0x0},
+	{0x40016, 0x60a},
+	{0x40036, 0x15},
+	{0x40056, 0x1200},
+	{0x40076, 0x0},
+	{0x40017, 0x61a},
+	{0x40037, 0x15},
+	{0x40057, 0x1300},
+	{0x40077, 0x0},
+	{0x40018, 0x60a},
+	{0x40038, 0x1a},
+	{0x40058, 0x1200},
+	{0x40078, 0x0},
+	{0x40019, 0x642},
+	{0x40039, 0x1a},
+	{0x40059, 0x1300},
+	{0x40079, 0x0},
+	{0x4001a, 0x4808},
+	{0x4003a, 0x880},
+	{0x4005a, 0x0},
+	{0x4007a, 0x0},
+	{0x900aa, 0x0},
+	{0x900ab, 0x790},
+	{0x900ac, 0x11a},
+	{0x900ad, 0x8},
+	{0x900ae, 0x7aa},
+	{0x900af, 0x2a},
+	{0x900b0, 0x10},
+	{0x900b1, 0x7b2},
+	{0x900b2, 0x2a},
+	{0x900b3, 0x0},
+	{0x900b4, 0x7c8},
+	{0x900b5, 0x109},
+	{0x900b6, 0x10},
+	{0x900b7, 0x10},
+	{0x900b8, 0x109},
+	{0x900b9, 0x10},
+	{0x900ba, 0x2a8},
+	{0x900bb, 0x129},
+	{0x900bc, 0x8},
+	{0x900bd, 0x370},
+	{0x900be, 0x129},
+	{0x900bf, 0xa},
+	{0x900c0, 0x3c8},
+	{0x900c1, 0x1a9},
+	{0x900c2, 0xc},
+	{0x900c3, 0x408},
+	{0x900c4, 0x199},
+	{0x900c5, 0x14},
+	{0x900c6, 0x790},
+	{0x900c7, 0x11a},
+	{0x900c8, 0x8},
+	{0x900c9, 0x4},
+	{0x900ca, 0x18},
+	{0x900cb, 0xe},
+	{0x900cc, 0x408},
+	{0x900cd, 0x199},
+	{0x900ce, 0x8},
+	{0x900cf, 0x8568},
+	{0x900d0, 0x108},
+	{0x900d1, 0x18},
+	{0x900d2, 0x790},
+	{0x900d3, 0x16a},
+	{0x900d4, 0x8},
+	{0x900d5, 0x1d8},
+	{0x900d6, 0x169},
+	{0x900d7, 0x10},
+	{0x900d8, 0x8558},
+	{0x900d9, 0x168},
+	{0x900da, 0x1ff8},
+	{0x900db, 0x85a8},
+	{0x900dc, 0x1e8},
+	{0x900dd, 0x50},
+	{0x900de, 0x798},
+	{0x900df, 0x16a},
+	{0x900e0, 0x60},
+	{0x900e1, 0x7a0},
+	{0x900e2, 0x16a},
+	{0x900e3, 0x8},
+	{0x900e4, 0x8310},
+	{0x900e5, 0x168},
+	{0x900e6, 0x8},
+	{0x900e7, 0xa310},
+	{0x900e8, 0x168},
+	{0x900e9, 0xa},
+	{0x900ea, 0x408},
+	{0x900eb, 0x169},
+	{0x900ec, 0x6e},
+	{0x900ed, 0x0},
+	{0x900ee, 0x68},
+	{0x900ef, 0x0},
+	{0x900f0, 0x408},
+	{0x900f1, 0x169},
+	{0x900f2, 0x0},
+	{0x900f3, 0x8310},
+	{0x900f4, 0x168},
+	{0x900f5, 0x0},
+	{0x900f6, 0xa310},
+	{0x900f7, 0x168},
+	{0x900f8, 0x1ff8},
+	{0x900f9, 0x85a8},
+	{0x900fa, 0x1e8},
+	{0x900fb, 0x68},
+	{0x900fc, 0x798},
+	{0x900fd, 0x16a},
+	{0x900fe, 0x78},
+	{0x900ff, 0x7a0},
+	{0x90100, 0x16a},
+	{0x90101, 0x68},
+	{0x90102, 0x790},
+	{0x90103, 0x16a},
+	{0x90104, 0x8},
+	{0x90105, 0x8b10},
+	{0x90106, 0x168},
+	{0x90107, 0x8},
+	{0x90108, 0xab10},
+	{0x90109, 0x168},
+	{0x9010a, 0xa},
+	{0x9010b, 0x408},
+	{0x9010c, 0x169},
+	{0x9010d, 0x58},
+	{0x9010e, 0x0},
+	{0x9010f, 0x68},
+	{0x90110, 0x0},
+	{0x90111, 0x408},
+	{0x90112, 0x169},
+	{0x90113, 0x0},
+	{0x90114, 0x8b10},
+	{0x90115, 0x168},
+	{0x90116, 0x1},
+	{0x90117, 0xab10},
+	{0x90118, 0x168},
+	{0x90119, 0x0},
+	{0x9011a, 0x1d8},
+	{0x9011b, 0x169},
+	{0x9011c, 0x80},
+	{0x9011d, 0x790},
+	{0x9011e, 0x16a},
+	{0x9011f, 0x18},
+	{0x90120, 0x7aa},
+	{0x90121, 0x6a},
+	{0x90122, 0xa},
+	{0x90123, 0x0},
+	{0x90124, 0x1e9},
+	{0x90125, 0x8},
+	{0x90126, 0x8080},
+	{0x90127, 0x108},
+	{0x90128, 0xf},
+	{0x90129, 0x408},
+	{0x9012a, 0x169},
+	{0x9012b, 0xc},
+	{0x9012c, 0x0},
+	{0x9012d, 0x68},
+	{0x9012e, 0x9},
+	{0x9012f, 0x0},
+	{0x90130, 0x1a9},
+	{0x90131, 0x0},
+	{0x90132, 0x408},
+	{0x90133, 0x169},
+	{0x90134, 0x0},
+	{0x90135, 0x8080},
+	{0x90136, 0x108},
+	{0x90137, 0x8},
+	{0x90138, 0x7aa},
+	{0x90139, 0x6a},
+	{0x9013a, 0x0},
+	{0x9013b, 0x8568},
+	{0x9013c, 0x108},
+	{0x9013d, 0xb7},
+	{0x9013e, 0x790},
+	{0x9013f, 0x16a},
+	{0x90140, 0x1f},
+	{0x90141, 0x0},
+	{0x90142, 0x68},
+	{0x90143, 0x8},
+	{0x90144, 0x8558},
+	{0x90145, 0x168},
+	{0x90146, 0xf},
+	{0x90147, 0x408},
+	{0x90148, 0x169},
+	{0x90149, 0xd},
+	{0x9014a, 0x0},
+	{0x9014b, 0x68},
+	{0x9014c, 0x0},
+	{0x9014d, 0x408},
+	{0x9014e, 0x169},
+	{0x9014f, 0x0},
+	{0x90150, 0x8558},
+	{0x90151, 0x168},
+	{0x90152, 0x8},
+	{0x90153, 0x3c8},
+	{0x90154, 0x1a9},
+	{0x90155, 0x3},
+	{0x90156, 0x370},
+	{0x90157, 0x129},
+	{0x90158, 0x20},
+	{0x90159, 0x2aa},
+	{0x9015a, 0x9},
+	{0x9015b, 0x8},
+	{0x9015c, 0xe8},
+	{0x9015d, 0x109},
+	{0x9015e, 0x0},
+	{0x9015f, 0x8140},
+	{0x90160, 0x10c},
+	{0x90161, 0x10},
+	{0x90162, 0x8138},
+	{0x90163, 0x104},
+	{0x90164, 0x8},
+	{0x90165, 0x448},
+	{0x90166, 0x109},
+	{0x90167, 0xf},
+	{0x90168, 0x7c0},
+	{0x90169, 0x109},
+	{0x9016a, 0x0},
+	{0x9016b, 0xe8},
+	{0x9016c, 0x109},
+	{0x9016d, 0x47},
+	{0x9016e, 0x630},
+	{0x9016f, 0x109},
+	{0x90170, 0x8},
+	{0x90171, 0x618},
+	{0x90172, 0x109},
+	{0x90173, 0x8},
+	{0x90174, 0xe0},
+	{0x90175, 0x109},
+	{0x90176, 0x0},
+	{0x90177, 0x7c8},
+	{0x90178, 0x109},
+	{0x90179, 0x8},
+	{0x9017a, 0x8140},
+	{0x9017b, 0x10c},
+	{0x9017c, 0x0},
+	{0x9017d, 0x478},
+	{0x9017e, 0x109},
+	{0x9017f, 0x0},
+	{0x90180, 0x1},
+	{0x90181, 0x8},
+	{0x90182, 0x8},
+	{0x90183, 0x4},
+	{0x90184, 0x0},
+	{0x90006, 0x8},
+	{0x90007, 0x7c8},
+	{0x90008, 0x109},
+	{0x90009, 0x0},
+	{0x9000a, 0x400},
+	{0x9000b, 0x106},
+	{0xd00e7, 0x400},
+	{0x90017, 0x0},
+	{0x9001f, 0x2b},
+	{0x90026, 0x69},
+	{0x400d0, 0x0},
+	{0x400d1, 0x101},
+	{0x400d2, 0x105},
+	{0x400d3, 0x107},
+	{0x400d4, 0x10f},
+	{0x400d5, 0x202},
+	{0x400d6, 0x20a},
+	{0x400d7, 0x20b},
+	{0x2003a, 0x2},
+	{0x200be, 0x3},
+	{0x2000b, 0x75},
+	{0x2000c, 0xe9},
+	{0x2000d, 0x91c},
+	{0x2000e, 0x2c},
+	{0x9000c, 0x0},
+	{0x9000d, 0x173},
+	{0x9000e, 0x60},
+	{0x9000f, 0x6110},
+	{0x90010, 0x2152},
+	{0x90011, 0xdfbd},
+	{0x90012, 0x2060},
+	{0x90013, 0x6152},
+	{0x20010, 0x5a},
+	{0x20011, 0x3},
+	{0x40080, 0xe0},
+	{0x40081, 0x12},
+	{0x40082, 0xe0},
+	{0x40083, 0x12},
+	{0x40084, 0xe0},
+	{0x40085, 0x12},
+	{0x400fd, 0xf},
+	{0x400f1, 0xe},
+	{0x10011, 0x1},
+	{0x10012, 0x1},
+	{0x10013, 0x180},
+	{0x10018, 0x1},
+	{0x10002, 0x6209},
+	{0x100b2, 0x1},
+	{0x101b4, 0x1},
+	{0x102b4, 0x1},
+	{0x103b4, 0x1},
+	{0x104b4, 0x1},
+	{0x105b4, 0x1},
+	{0x106b4, 0x1},
+	{0x107b4, 0x1},
+	{0x108b4, 0x1},
+	{0x11011, 0x1},
+	{0x11012, 0x1},
+	{0x11013, 0x180},
+	{0x11018, 0x1},
+	{0x11002, 0x6209},
+	{0x110b2, 0x1},
+	{0x111b4, 0x1},
+	{0x112b4, 0x1},
+	{0x113b4, 0x1},
+	{0x114b4, 0x1},
+	{0x115b4, 0x1},
+	{0x116b4, 0x1},
+	{0x117b4, 0x1},
+	{0x118b4, 0x1},
+	{0x20089, 0x1},
+	{0x20088, 0x19},
+	{0xc0080, 0x0},
+	{0xd0000, 0x1},
+
+};
+
+static struct dram_fsp_msg ddr_dram_fsp_msg[] = {
+	{
+		/* P0 3733mts 1D */
+		.drate = 3733,
+		.fw_type = FW_1D_IMAGE,
+		.fsp_cfg = ddr_fsp0_cfg,
+		.fsp_cfg_num = ARRAY_SIZE(ddr_fsp0_cfg),
+
+	},
+
+	{
+		/* P0 3733mts 2D */
+		.drate = 3733,
+		.fw_type = FW_2D_IMAGE,
+		.fsp_cfg = ddr_fsp0_2d_cfg,
+		.fsp_cfg_num = ARRAY_SIZE(ddr_fsp0_2d_cfg),
+	},
+
+};
+
+/* ddr timing config params */
+struct dram_timing_info dram_timing = {
+	.ddrc_cfg = ddr_ddrc_cfg,
+	.ddrc_cfg_num = ARRAY_SIZE(ddr_ddrc_cfg),
+	.ddrphy_cfg = ddr_ddrphy_cfg,
+	.ddrphy_cfg_num = ARRAY_SIZE(ddr_ddrphy_cfg),
+	.fsp_msg = ddr_dram_fsp_msg,
+	.fsp_msg_num = ARRAY_SIZE(ddr_dram_fsp_msg),
+	.ddrphy_trained_csr = ddr_ddrphy_trained_csr,
+	.ddrphy_trained_csr_num = ARRAY_SIZE(ddr_ddrphy_trained_csr),
+	.ddrphy_pie = ddr_phy_pie,
+	.ddrphy_pie_num = ARRAY_SIZE(ddr_phy_pie),
+	.fsp_table = { 3733, },
+	.fsp_cfg = ddr_dram_fsp_cfg,
+	.fsp_cfg_num = ARRAY_SIZE(ddr_dram_fsp_cfg),
+};
diff --git a/board/phytec/imx93_phycore/spl.c b/board/phytec/imx93_phycore/spl.c
new file mode 100644
index 00000000000..6911f2800ad
--- /dev/null
+++ b/board/phytec/imx93_phycore/spl.c
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2022 NXP
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Christoph Stoidner <c.stoidner at phytec.de>
+ */
+
+#include <command.h>
+#include <cpu_func.h>
+#include <hang.h>
+#include <image.h>
+#include <init.h>
+#include <log.h>
+#include <spl.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm/arch/imx93_pins.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/mach-imx/boot_mode.h>
+#include <asm/mach-imx/mxc_i2c.h>
+#include <asm/arch-mx7ulp/gpio.h>
+#include <asm/sections.h>
+#include <asm/mach-imx/syscounter.h>
+#include <asm/mach-imx/ele_api.h>
+#include <dm/uclass.h>
+#include <dm/device.h>
+#include <dm/uclass-internal.h>
+#include <dm/device-internal.h>
+#include <linux/delay.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/ccm_regs.h>
+#include <asm/arch/ddr.h>
+#include <power/pmic.h>
+#include <power/pca9450.h>
+#include <asm/arch/trdc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Will be part of drivers/power/regulator/pca9450.c
+ * when pca9451a support is added.
+ */
+#define PCA9450_REG_PWRCTRL_TOFF_DEB    BIT(5)
+
+int spl_board_boot_device(enum boot_device boot_dev_spl)
+{
+	if (IS_ENABLED(CONFIG_SPL_BOOTROM_SUPPORT))
+		return BOOT_DEVICE_BOOTROM;
+
+	switch (boot_dev_spl) {
+	case SD1_BOOT:
+	case MMC1_BOOT:
+		return BOOT_DEVICE_MMC1;
+	case SD2_BOOT:
+	case MMC2_BOOT:
+		return BOOT_DEVICE_MMC2;
+	default:
+		return BOOT_DEVICE_NONE;
+	}
+}
+
+void spl_board_init(void)
+{
+	puts("Normal Boot\n");
+}
+
+void spl_dram_init(void)
+{
+	ddr_init(&dram_timing);
+}
+
+int power_init_board(void)
+{
+	struct udevice *dev;
+	int ret;
+	unsigned int val = 0;
+
+	if (!IS_ENABLED(CONFIG_DM_PMIC_PCA9450))
+		return 0;
+
+	ret = pmic_get("pmic at 25", &dev);
+	if (ret == -ENODEV) {
+		puts("No pca9450 at 25\n");
+		return 0;
+	}
+	if (ret != 0)
+		return ret;
+
+	/* BUCKxOUT_DVS0/1 control BUCK123 output */
+	pmic_reg_write(dev, PCA9450_BUCK123_DVS, 0x29);
+
+	/* enable DVS control through PMIC_STBY_REQ */
+	pmic_reg_write(dev, PCA9450_BUCK1CTRL, 0x59);
+
+	ret = pmic_reg_read(dev, PCA9450_PWR_CTRL);
+	if (ret < 0)
+		return ret;
+
+	val = ret;
+	if (IS_ENABLED(CONFIG_IMX9_LOW_DRIVE_MODE)) {
+		/* 0.8v for Low drive mode
+		 */
+		if (val & PCA9450_REG_PWRCTRL_TOFF_DEB) {
+			pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0, 0x0c);
+			pmic_reg_write(dev, PCA9450_BUCK3OUT_DVS0, 0x0c);
+		} else {
+			pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0, 0x10);
+			pmic_reg_write(dev, PCA9450_BUCK3OUT_DVS0, 0x10);
+		}
+	} else {
+		/* 0.9v for Over drive mode
+		 */
+		if (val & PCA9450_REG_PWRCTRL_TOFF_DEB) {
+			pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0, 0x14);
+			pmic_reg_write(dev, PCA9450_BUCK3OUT_DVS0, 0x14);
+		} else {
+			pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS0, 0x18);
+			pmic_reg_write(dev, PCA9450_BUCK3OUT_DVS0, 0x18);
+		}
+	}
+
+	/* set standby voltage to 0.65v */
+	if (val & PCA9450_REG_PWRCTRL_TOFF_DEB)
+		pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS1, 0x0);
+	else
+		pmic_reg_write(dev, PCA9450_BUCK1OUT_DVS1, 0x4);
+
+	/* I2C_LT_EN*/
+	pmic_reg_write(dev, 0xa, 0x3);
+
+	return 0;
+}
+
+extern int imx9_probe_mu(void *ctx, struct event *event);
+void board_init_f(ulong dummy)
+{
+	int ret;
+
+	/* Clear the BSS. */
+	memset(__bss_start, 0, __bss_end - __bss_start);
+
+	timer_init();
+
+	arch_cpu_init();
+
+	board_early_init_f();
+
+	spl_early_init();
+
+	preloader_console_init();
+
+	ret = imx9_probe_mu(NULL, NULL);
+	if (ret) {
+		printf("Fail to init ELE API\n");
+	} else {
+		printf("SOC: 0x%x\n", gd->arch.soc_rev);
+		printf("LC: 0x%x\n", gd->arch.lifecycle);
+	}
+
+	power_init_board();
+
+	if (!IS_ENABLED(CONFIG_IMX9_LOW_DRIVE_MODE))
+		set_arm_core_max_clk();
+
+	/* Init power of mix */
+	soc_power_init();
+
+	/* Setup TRDC for DDR access */
+	trdc_init();
+
+	/* DDR initialization */
+	spl_dram_init();
+
+	/* Put M33 into CPUWAIT for following kick */
+	ret = m33_prepare();
+	if (!ret)
+		printf("M33 prepare ok\n");
+
+	board_init_r(NULL, 0);
+}
diff --git a/configs/imx93_phycore_defconfig b/configs/imx93_phycore_defconfig
new file mode 100644
index 00000000000..4d9d790e0f6
--- /dev/null
+++ b/configs/imx93_phycore_defconfig
@@ -0,0 +1,147 @@
+CONFIG_ARM=y
+CONFIG_ARCH_IMX9=y
+CONFIG_TEXT_BASE=0x80200000
+CONFIG_SYS_MALLOC_LEN=0x2000000
+CONFIG_SYS_MALLOC_F_LEN=0x18000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_ENV_SIZE=0x4000
+CONFIG_ENV_OFFSET=0x700000
+CONFIG_IMX_CONFIG="arch/arm/mach-imx/imx9/imximage.cfg"
+CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="imx93-phycore-segin"
+CONFIG_SPL_TEXT_BASE=0x2049A000
+CONFIG_TARGET_IMX93_PHYCORE=y
+CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SPL_STACK=0x20519dd0
+CONFIG_SPL=y
+CONFIG_CMD_DEKBLOB=y
+CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x88000000
+CONFIG_SPL_LOAD_IMX_CONTAINER=y
+CONFIG_SYS_LOAD_ADDR=0x80400000
+CONFIG_SYS_MEMTEST_START=0x80000000
+CONFIG_SYS_MEMTEST_END=0x90000000
+CONFIG_REMAKE_ELF=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SYS_MONITOR_LEN=524288
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BOOTDELAY=1
+CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_BOOTCOMMAND="run distro_bootcmd;run bsp_bootcmd"
+CONFIG_DEFAULT_FDT_FILE="imx93-phycore-segin.dtb"
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_BOARD_LATE_INIT=y
+CONFIG_SPL_MAX_SIZE=0x26000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x2051a000
+CONFIG_SPL_BSS_MAX_SIZE=0x2000
+CONFIG_SPL_BOARD_INIT=y
+CONFIG_SPL_BOOTROM_SUPPORT=y
+CONFIG_IMX_CONTAINER_CFG="arch/arm/mach-imx/imx9/container.cfg"
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SYS_SPL_MALLOC=y
+CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
+CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x83200000
+CONFIG_SYS_SPL_MALLOC_SIZE=0x80000
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1040
+CONFIG_SPL_I2C=y
+CONFIG_SPL_POWER=y
+CONFIG_SPL_WATCHDOG=y
+CONFIG_SYS_PROMPT="u-boot=> "
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_CBSIZE=2048
+CONFIG_SYS_PBSIZE=2074
+CONFIG_CMD_ERASEENV=y
+CONFIG_CMD_NVEDIT_EFI=y
+CONFIG_CRC32_VERIFY=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DFU=y
+CONFIG_CMD_FUSE=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_POWEROFF=y
+CONFIG_CMD_READ=y
+CONFIG_CMD_WDT=y
+CONFIG_BOOTP_PREFER_SERVERIP=y
+CONFIG_CMD_SNTP=y
+CONFIG_CMD_BMP=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EFIDEBUG=y
+CONFIG_CMD_RTC=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_GETTIME=y
+CONFIG_CMD_TIMER=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_HASH=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_ENV_SOURCE_FILE="imx93_phycore"
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_NOWHERE=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SYS_MMC_ENV_DEV=1
+CONFIG_USE_ETHPRIME=y
+CONFIG_ETHPRIME="eth1"
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_SPL_DM=y
+CONFIG_SYSCON=y
+CONFIG_SPL_CLK_IMX93=y
+CONFIG_CLK_IMX93=y
+CONFIG_DFU_MMC=y
+CONFIG_DFU_RAM=y
+CONFIG_GPIO_HOG=y
+CONFIG_IMX_RGPIO2P=y
+CONFIG_DM_PCA953X=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_IMX_LPI2C=y
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS400_ES_SUPPORT=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_FSL_USDHC=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SF_DEFAULT_SPEED=40000000
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH_PHY=y
+CONFIG_PHY_GIGE=y
+CONFIG_DWC_ETH_QOS=y
+CONFIG_DWC_ETH_QOS_IMX=y
+CONFIG_FEC_MXC=y
+CONFIG_MII=y
+CONFIG_MIPI_DPHY_HELPERS=y
+CONFIG_PHY_IMX93_MIPI_DPHY=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_PINCTRL_IMX93=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_IMX93_BLK_CTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_PMIC_PCA9450=y
+CONFIG_SPL_DM_PMIC_PCA9450=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_PCA9450=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_PCF2131=y
+CONFIG_DM_SERIAL=y
+CONFIG_FSL_LPUART=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_NXP_FSPI=y
+CONFIG_DM_THERMAL=y
+CONFIG_IMX_TMU=y
+CONFIG_ULP_WATCHDOG=y
+CONFIG_WDT=y
+CONFIG_LZO=y
+CONFIG_BZIP2=y
diff --git a/doc/board/phytec/imx93_phycore.rst b/doc/board/phytec/imx93_phycore.rst
new file mode 100644
index 00000000000..f9b87691cdc
--- /dev/null
+++ b/doc/board/phytec/imx93_phycore.rst
@@ -0,0 +1,68 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+imx93_phytec
+============
+
+U-Boot for the NXP i.MX93 Phytec SoM of a Segin board
+
+Quick Start
+-----------
+
+- Get and Build the ARM Trusted firmware
+- Get the DDR firmware
+- Get ahab-container.img
+- Build U-Boot
+- Boot
+
+Get and Build the ARM Trusted firmware
+--------------------------------------
+
+Note: srctree is U-Boot source directory
+Get ATF from: https://github.com/nxp-imx/imx-atf/
+branch: lf_v2.8
+
+.. code-block:: bash
+
+   $ unset LDFLAGS
+   $ make PLAT=imx93 bl31
+   $ cp build/imx93/release/bl31.bin $(srctree)
+
+Get the DDR firmware
+--------------------
+
+.. code-block:: bash
+
+   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.21.bin
+   $ chmod +x firmware-imx-8.21.bin
+   $ ./firmware-imx-8.21.bin
+   $ cp firmware-imx-8.21/firmware/ddr/synopsys/lpddr4*.bin $(srctree)
+
+Get ahab-container.img
+---------------------------------------
+
+.. code-block:: bash
+
+   $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-sentinel-0.10.bin
+   $ chmod +x firmware-sentinel-0.10.bin
+   $ ./firmware-sentinel-0.10.bin
+   $ cp firmware-sentinel-0.10/mx93a0-ahab-container.img $(srctree)
+
+Build U-Boot
+------------
+
+.. code-block:: bash
+
+   $ export CROSS_COMPILE=aarch64-poky-linux-
+   $ make imx93_phytec_defconfig
+   $ make
+
+Burn the flash.bin to MicroSD card offset 32KB:
+
+.. code-block:: bash
+
+   $ dd if=flash.bin of=/dev/sd[x] bs=1024 seek=32 conv=notrunc
+
+Boot
+----
+
+Set Boot switch to SD boot
diff --git a/doc/board/phytec/index.rst b/doc/board/phytec/index.rst
index 9996bce9741..a740f0cbae4 100644
--- a/doc/board/phytec/index.rst
+++ b/doc/board/phytec/index.rst
@@ -7,5 +7,6 @@ PHYTEC
    :maxdepth: 2
 
    imx8mm-phygate-tauri-l
+   imx93_phycore
    phycore-imx8mm
    phycore-imx8mp
diff --git a/include/configs/imx93_phycore.h b/include/configs/imx93_phycore.h
new file mode 100644
index 00000000000..ee1322c9b52
--- /dev/null
+++ b/include/configs/imx93_phycore.h
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2022 NXP
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Christoph Stoidner <c.stoidner at phytec.de>
+ */
+
+#ifndef __IMX93_PHYCORE_H
+#define __IMX93_PHYCORE_H
+
+#include <linux/sizes.h>
+#include <linux/stringify.h>
+#include <asm/arch/imx-regs.h>
+
+#define CFG_SYS_UBOOT_BASE	\
+	(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
+
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
+	func(MMC, mmc, 1)
+
+#include <config_distro_bootcmd.h>
+
+/* Initial environment variables */
+#define CFG_EXTRA_ENV_SETTINGS BOOTENV
+
+#define CFG_SYS_INIT_RAM_ADDR        0x80000000
+#define CFG_SYS_INIT_RAM_SIZE        0x200000
+
+#define CFG_SYS_SDRAM_BASE           0x80000000
+#define PHYS_SDRAM                   0x80000000
+#define PHYS_SDRAM_SIZE              0x80000000
+
+#define CFG_SYS_FSL_USDHC_NUM	2
+
+/* Using ULP WDOG for reset */
+#define WDOG_BASE_ADDR          WDG3_BASE_ADDR
+
+#if defined(CONFIG_CMD_NET)
+#define PHY_ANEG_TIMEOUT 20000
+#endif
+
+#ifdef CONFIG_IMX_MATTER_TRUSTY
+#define NS_ARCH_ARM64 1
+#endif
+
+#endif
-- 
2.41.0



More information about the U-Boot mailing list