[PATCH 1/3] phycore-imx8mp: add USB host support

[Benjamin Hahn]

The phyBOARD Pollux has two USB ports. Add support for USB host and USB
storage for the USB1 port.

Signed-off-by: Benjamin Hahn <B.Hahn at phytec.de>
---
 arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi | 13 +++++++++++++
 configs/phycore-imx8mp_defconfig                    | 10 ++++++++++
 2 files changed, 23 insertions(+)

diff --git a/arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi b/arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi
index 1c7b250549..5d6974f8fa 100644
--- a/arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi
+++ b/arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi
@@ -70,6 +70,19 @@
 	bootph-pre-ram;
 };
 
+&usb3_1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb_dwc3_1 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
 &usdhc2 {
 	bootph-pre-ram;
 };
diff --git a/configs/phycore-imx8mp_defconfig b/configs/phycore-imx8mp_defconfig
index 519e0cfb3d..74450b957b 100644
--- a/configs/phycore-imx8mp_defconfig
+++ b/configs/phycore-imx8mp_defconfig
@@ -65,6 +65,7 @@ CONFIG_CMD_FUSE=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
@@ -104,6 +105,7 @@ CONFIG_DM_ETH_PHY=y
 CONFIG_FEC_MXC=y
 CONFIG_RGMII=y
 CONFIG_MII=y
+CONFIG_PHY_IMX8MQ_USB=y
 CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
 CONFIG_PINCTRL_IMX8M=y
@@ -120,4 +122,12 @@ CONFIG_SPL_SYSRESET=y
 CONFIG_SYSRESET_PSCI=y
 CONFIG_SYSRESET_WATCHDOG=y
 CONFIG_DM_THERMAL=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_STORAGE=y
 CONFIG_IMX_WATCHDOG=y

-- 
2.34.1