[PATCH] video: tidss: Use DT property names for parsing nodes

[Devarsh Thakkar]

Use device-tree node property names for parsing nodes instead of
indexing as indexing could be different between different SoCs based on
number of DSS entities available on that particular SoC.

Also correct the video layer naming in driver to match to actual one
being used in upstream DSS device-tree node [1].

This also fixes AM62x splash screen usage using the latest upstream DSS
device-tree nodes where hard-coded indexing which driver was using
before this patch was not matching the correct properties in the DT
node.

[1]: Upstream AM62x DSS node:
https://github.com/torvalds/linux/blob/v6.8-rc1/arch/arm64/boot/dts/ti/k3-am62-main.dtsi#L774

Fixes: 5f9f816bb8 ("drivers: video: tidss: TIDSS video driver support
for AM62x")
Signed-off-by: Devarsh Thakkar <devarsht at ti.com>
---
 drivers/video/tidss/tidss_drv.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/video/tidss/tidss_drv.c b/drivers/video/tidss/tidss_drv.c
index e285f255d7..1380c6b693 100644
--- a/drivers/video/tidss/tidss_drv.c
+++ b/drivers/video/tidss/tidss_drv.c
@@ -107,7 +107,7 @@ const struct dss_features dss_am625_feats = {
 
 	.num_planes = 2,
 	/* note: vid is plane_id 0 and vidl1 is plane_id 1 */
-	.vid_name = { "vidl1", "vid1" },
+	.vid_name = { "vidl1", "vid" },
 	.vid_lite = { true, false },
 	.vid_order = { 1, 0 },
 };
@@ -814,13 +814,13 @@ static int tidss_drv_probe(struct udevice *dev)
 		priv->bus_format = &dss_bus_formats[8];
 
 	/* Common address */
-	priv->base_common = dev_remap_addr_index(dev, 0);
+	priv->base_common = dev_remap_addr_name(dev, priv->feat->common);
 	if (!priv->base_common)
 		return -EINVAL;
 
 	/* plane address setup and enable */
 	for (i = 0; i < priv->feat->num_planes; i++) {
-		priv->base_vid[i] = dev_remap_addr_index(dev, i + 2);
+		priv->base_vid[i] = dev_remap_addr_name(dev, priv->feat->vid_name[i]);
 		if (!priv->base_vid[i])
 			return -EINVAL;
 	}
@@ -841,8 +841,8 @@ static int tidss_drv_probe(struct udevice *dev)
 
 	/* video port address clocks and enable */
 	for (i = 0; i < priv->feat->num_vps; i++) {
-		priv->base_ovr[i] = dev_remap_addr_index(dev, i + 4);
-		priv->base_vp[i] = dev_remap_addr_index(dev, i + 6);
+		priv->base_ovr[i] = dev_remap_addr_name(dev, priv->feat->ovr_name[i]);
+		priv->base_vp[i] = dev_remap_addr_name(dev, priv->feat->vp_name[i]);
 	}
 
 	ret = clk_get_by_name(dev, "vp1", &priv->vp_clk[0]);
-- 
2.34.1