[PATCH] ARM: imx: Enable SPL_BOARD_INIT on DH i.MX8M Plus DHCOM

[Marek Vasut]

The CONFIG_SPL_BOARD_INIT lets SPL common code call spl_board_init()
during the SPL start up. On this particular system, spl_board_init()
is used to reconfigure GIC clock parent to PLL2 500M, which is the
configuration expected by the Linux kernel. Enable SPL_BOARD_INIT .

Signed-off-by: Marek Vasut <marex at denx.de>
---
Cc: Fabio Estevam <festevam at denx.de>
Cc: Stefano Babic <sbabic at denx.de>
Cc: u-boot at dh-electronics.com
---
 configs/imx8mp_dhcom_pdk2_defconfig | 1 +
 configs/imx8mp_dhcom_pdk3_defconfig | 1 +
 2 files changed, 2 insertions(+)

diff --git a/configs/imx8mp_dhcom_pdk2_defconfig b/configs/imx8mp_dhcom_pdk2_defconfig
index dc482abad85..4f907ce00d0 100644
--- a/configs/imx8mp_dhcom_pdk2_defconfig
+++ b/configs/imx8mp_dhcom_pdk2_defconfig
@@ -54,6 +54,7 @@ CONFIG_SPL_MAX_SIZE=0x26000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x96fc00
 CONFIG_SPL_BSS_MAX_SIZE=0x400
+CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_BOOTROM_SUPPORT=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
diff --git a/configs/imx8mp_dhcom_pdk3_defconfig b/configs/imx8mp_dhcom_pdk3_defconfig
index 3442af6f00e..9972e2d96b6 100644
--- a/configs/imx8mp_dhcom_pdk3_defconfig
+++ b/configs/imx8mp_dhcom_pdk3_defconfig
@@ -55,6 +55,7 @@ CONFIG_SPL_MAX_SIZE=0x26000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x96fc00
 CONFIG_SPL_BSS_MAX_SIZE=0x400
+CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_BOOTROM_SUPPORT=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-- 
2.43.0