[PATCH v4 00/11] An effort to bring DT bindings compliance within U-Boot

Marek Vasut marex at denx.de
Thu Jan 25 17:38:23 CET 2024


On 1/25/24 16:04, Tom Rini wrote:
> On Thu, Jan 25, 2024 at 12:54:22PM +0530, Sumit Garg wrote:
> 
> [snip]
>> But at this point we have to move away from apprehensions about DT ABI
>> breakages and provide real examples of the DT ABI breakages in the
>> past. Are you aware of any DT ABI breaking change backported to Linux
>> stable releases? This is the sort of information we would like to make
>> DT bindings maintainers aware about.
> 
> Well, how far back are we going? There was a serial related one, but it
> was probably closer than not to 10 years ago and lessons have been
> learned from it already.
> 
> The real breakage comes in the form of (from the Linux kernel):
> commit 37685f6a63eeca2135d1f704e7638409a071b1f6
> Author: Peter Ujfalusi <peter.ujfalusi at ti.com>
> Date:   Tue Feb 19 08:46:33 2019 -0800
> 
>      ARM: dts: am335x-evm: Fix PHY mode for ethernet
> 
>      The PHY must add both tx and rx delay and not only on the tx clock.
>      The board uses AR8031_AL1A PHY where the rx delay is enabled by default,
>      the tx dealy is disabled.
> 
>      The reason why rgmii-txid worked because the rx delay was not disabled by
>      the driver so essentially we ended up with rgmii-id PHY mode.
> 
>      Signed-off-by: Peter Ujfalusi <peter.ujfalusi at ti.com>
>      Signed-off-by: Tony Lindgren <tony at atomide.com>
> 
> And this is of the style "the DTS was wrong before so we can break it".
> This is the specific example (as the board is in my lab) that comes most
> clearly to mind but there have been similar examples in 2022/2023.
> 
> The other just as painful examples I think may be where Marek is
> concerned and it's around nodes being renamed for correctness. We've had
> a number of cases where a - turned to _ (or vice versa?) and whoops,
> platform stops booting. Down the line, tooling would catch that, and
> it's a problem of not being able to use better tooling until we have the
> updates that might break the boards that need the better tooling.
> 
> And really this gets to the crux of the problem, how much testing do we
> insist happens prior to a re-sync being merged? Do we want to go with
> the whole of the dts files are re-synced, or do we leave it per vendor?

I'd much prefer to leave it per vendor, with the recommendation to use 
synced DTs. Eventually things will stabilize and vendors will start 
switching over.


More information about the U-Boot mailing list