[PATCH] ARM: imx: Configure GIC clock parent on Data Modul i.MX8M Plus eDM SBC
Marek Vasut
marex at denx.de
Fri Jan 19 01:46:36 CET 2024
The CONFIG_SPL_BOARD_INIT lets SPL common code call spl_board_init()
during the SPL start up. On this particular system, spl_board_init()
is used to reconfigure GIC clock parent to PLL2 500M, which is the
configuration expected by the Linux kernel. Enable SPL_BOARD_INIT
and fill in the GIC clock configuration code.
Signed-off-by: Marek Vasut <marex at denx.de>
---
Cc: Fabio Estevam <festevam at denx.de>
Cc: Stefano Babic <sbabic at denx.de>
---
board/data_modul/imx8mp_edm_sbc/spl.c | 13 +++++++++++++
configs/imx8mp_data_modul_edm_sbc_defconfig | 1 +
2 files changed, 14 insertions(+)
diff --git a/board/data_modul/imx8mp_edm_sbc/spl.c b/board/data_modul/imx8mp_edm_sbc/spl.c
index a3600c8568a..cc2d253e391 100644
--- a/board/data_modul/imx8mp_edm_sbc/spl.c
+++ b/board/data_modul/imx8mp_edm_sbc/spl.c
@@ -80,6 +80,19 @@ int data_modul_imx_edm_sbc_board_power_init(void)
return 0;
}
+void spl_board_init(void)
+{
+ /*
+ * Set GIC clock to 500 MHz for OD VDD_SOC. Kernel driver does not
+ * allow to change it. Should set the clock after PMIC setting done.
+ * Default is 400 MHz (system_pll1_800m with div = 2) set by ROM for
+ * ND VDD_SOC.
+ */
+ clock_enable(CCGR_GIC, 0);
+ clock_set_target_val(GIC_CLK_ROOT, CLK_ROOT_ON | CLK_ROOT_SOURCE_SEL(5));
+ clock_enable(CCGR_GIC, 1);
+}
+
int spl_board_boot_device(enum boot_device boot_dev_spl)
{
if (boot_dev_spl == SPI_NOR_BOOT) /* SPI NOR */
diff --git a/configs/imx8mp_data_modul_edm_sbc_defconfig b/configs/imx8mp_data_modul_edm_sbc_defconfig
index a55630c1a6d..d29bc986267 100644
--- a/configs/imx8mp_data_modul_edm_sbc_defconfig
+++ b/configs/imx8mp_data_modul_edm_sbc_defconfig
@@ -56,6 +56,7 @@ CONFIG_SPL_MAX_SIZE=0x25000
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
CONFIG_SPL_BSS_START_ADDR=0x96fc00
CONFIG_SPL_BSS_MAX_SIZE=0x400
+CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_BOOTROM_SUPPORT=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
--
2.43.0
More information about the U-Boot
mailing list