[PATCH V4 3/7] rockchip: boot_mode: Allow rockchip_dnl_key_pressed() in SPL

Kever Yang kever.yang at rock-chips.com
Thu Jan 18 08:20:52 CET 2024


Hi Chris,

On 2024/1/2 23:46, Chris Morgan wrote:
> From: Chris Morgan <macromorgan at hotmail.com>
>
> Update the rockchip_dnl_key_pressed() so that it can run in
> SPL. Also change the ADC channel to a define that can be
> overridden by a board specific option.

I should ask this earlier.

Why you have to enable the download key in SPL?

This works for a long time in U-Boot proper, both mainline and 
downstream vendor U-Boot,

no one is detect this download key in SPL.

In theory the SPL can implement all the feature which is available in 
U-Boot proper,

but it would be better to make the SPL focus on the job it should be 
done and keep as small as possible.


Thanks,

- Kever

>
> Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
> ---
>   arch/arm/mach-rockchip/Makefile    |  4 ++--
>   arch/arm/mach-rockchip/boot_mode.c | 11 ++++++++++-
>   2 files changed, 12 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile
> index 1dc92066bb..ff089ae949 100644
> --- a/arch/arm/mach-rockchip/Makefile
> +++ b/arch/arm/mach-rockchip/Makefile
> @@ -15,13 +15,13 @@ obj-tpl-$(CONFIG_ROCKCHIP_PX30) += px30-board-tpl.o
>   
>   obj-spl-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board-spl.o
>   
> -ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
> -
>   # Always include boot_mode.o, as we bypass it (i.e. turn it off)
>   # inside of boot_mode.c when CONFIG_ROCKCHIP_BOOT_MODE_REG is 0.  This way,
>   # we can have the preprocessor correctly recognise both 0x0 and 0
>   # meaning "turn it off".
>   obj-y += boot_mode.o
> +
> +ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
>   obj-$(CONFIG_ROCKCHIP_COMMON_BOARD) += board.o
>   obj-$(CONFIG_MISC_INIT_R) += misc.o
>   endif
> diff --git a/arch/arm/mach-rockchip/boot_mode.c b/arch/arm/mach-rockchip/boot_mode.c
> index eb8f65ae4e..d2308768be 100644
> --- a/arch/arm/mach-rockchip/boot_mode.c
> +++ b/arch/arm/mach-rockchip/boot_mode.c
> @@ -38,6 +38,10 @@ void set_back_to_bootrom_dnl_flag(void)
>   #define KEY_DOWN_MIN_VAL	0
>   #define KEY_DOWN_MAX_VAL	30
>   
> +#ifndef RK_DNL_ADC_CHAN
> +#define RK_DNL_ADC_CHAN		1
> +#endif
> +
>   __weak int rockchip_dnl_key_pressed(void)
>   {
>   	unsigned int val;
> @@ -52,7 +56,8 @@ __weak int rockchip_dnl_key_pressed(void)
>   	ret = -ENODEV;
>   	uclass_foreach_dev(dev, uc) {
>   		if (!strncmp(dev->name, "saradc", 6)) {
> -			ret = adc_channel_single_shot(dev->name, 1, &val);
> +			ret = adc_channel_single_shot(dev->name,
> +						      RK_DNL_ADC_CHAN, &val);
>   			break;
>   		}
>   	}
> @@ -73,11 +78,13 @@ __weak int rockchip_dnl_key_pressed(void)
>   
>   void rockchip_dnl_mode_check(void)
>   {
> +#if CONFIG_IS_ENABLED(ADC)
>   	if (rockchip_dnl_key_pressed()) {
>   		printf("download key pressed, entering download mode...");
>   		set_back_to_bootrom_dnl_flag();
>   		do_reset(NULL, 0, 0, NULL);
>   	}
> +#endif
>   }
>   
>   int setup_boot_mode(void)
> @@ -90,6 +97,7 @@ int setup_boot_mode(void)
>   	boot_mode = readl(reg);
>   	debug("%s: boot mode 0x%08x\n", __func__, boot_mode);
>   
> +#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD)
>   	/* Clear boot mode */
>   	writel(BOOT_NORMAL, reg);
>   
> @@ -103,6 +111,7 @@ int setup_boot_mode(void)
>   		env_set("preboot", "setenv preboot; ums mmc 0");
>   		break;
>   	}
> +#endif
>   
>   	return 0;
>   }


More information about the U-Boot mailing list