[PATCH v4 0/6] rpi5: initial support

[Jens Maus]

Hi,

> Am 22.01.2024 um 15:16 schrieb Ivan T. Ivanov <iivanov at suse.de>:
> 
> On 01-22 13:57, Ivan T. Ivanov wrote:
>> I was able to enable early debug UART in U-Boot and I will try to
>> find what is happening, once I get some free cycles.
> 
> Ok, this was relatively easy to find :-)
> 
> New versions of EEPROM firmware change “kernel”/U-Boot load address 
> from 0x80000 to 0x200000. And because on RPi’s CONFIG_TEXT_BASE is
> hardcoded to 0x80000 code run through the fields. 
> 
> Hopefully simple patch like bellow make it work fine in older and
> newer EEPROM firmware versions.

Thanks for this tiny but important fix on your patchset. In fact, I was able to verify that now with your latest v5 patchset for the initial rpi5 support even newer/latest rpi-eeprom versions work as expected and u-boot is chain loaded by the rpi boot loader.

So thanks again for that fix and I am looking forward to seeing your patchset integrated and hopefully also maintained in future so that USB boot and GPIO support will be added in the near future.

regards,
jens
-- 
Jens Maus, Dresden/Germany
http://jens-maus.de/