[PATCH v2 5/7] video: endeavoru-panel: shift the init sequence by one step earlier
Svyatoslav Ryhel
clamor95 at gmail.com
Wed Jan 31 07:57:19 CET 2024
Shift all setup stages one step earlier to better fit the
existing uclass.
Signed-off-by: Svyatoslav Ryhel <clamor95 at gmail.com>
---
drivers/video/endeavoru-panel.c | 128 +++++++++++++++++---------------
1 file changed, 68 insertions(+), 60 deletions(-)
diff --git a/drivers/video/endeavoru-panel.c b/drivers/video/endeavoru-panel.c
index 79a272128b..1bff641434 100644
--- a/drivers/video/endeavoru-panel.c
+++ b/drivers/video/endeavoru-panel.c
@@ -57,61 +57,8 @@ static void dcs_write_one(struct mipi_dsi_device *dsi, u8 cmd, u8 data)
static int endeavoru_panel_enable_backlight(struct udevice *dev)
{
- struct endeavoru_panel_priv *priv = dev_get_priv(dev);
- int ret;
-
- ret = dm_gpio_set_value(&priv->reset_gpio, 1);
- if (ret) {
- log_err("error changing reset-gpios (%d)\n", ret);
- return ret;
- }
- mdelay(5);
-
- ret = regulator_set_enable_if_allowed(priv->vddio, 1);
- if (ret) {
- log_err("error enabling iovcc-supply (%d)\n", ret);
- return ret;
- }
- mdelay(1);
-
- ret = regulator_set_enable_if_allowed(priv->vdd, 1);
- if (ret) {
- log_err("error enabling vcc-supply (%d)\n", ret);
- return ret;
- }
- mdelay(20);
-
- ret = dm_gpio_set_value(&priv->reset_gpio, 0);
- if (ret) {
- log_err("error changing reset-gpios (%d)\n", ret);
- return ret;
- }
- mdelay(2);
-
- /* Reset panel */
- ret = dm_gpio_set_value(&priv->reset_gpio, 1);
- if (ret) {
- log_err("error changing reset-gpios (%d)\n", ret);
- return ret;
- }
- mdelay(1);
-
- ret = dm_gpio_set_value(&priv->reset_gpio, 0);
- if (ret) {
- log_err("error changing reset-gpios (%d)\n", ret);
- return ret;
- }
- mdelay(25);
-
- return 0;
-}
-
-static int endeavoru_panel_set_backlight(struct udevice *dev, int percent)
-{
- struct endeavoru_panel_priv *priv = dev_get_priv(dev);
struct mipi_dsi_panel_plat *plat = dev_get_plat(dev);
struct mipi_dsi_device *dsi = plat->device;
- int ret;
dcs_write_one(dsi, 0xc2, 0x08);
@@ -160,18 +107,22 @@ static int endeavoru_panel_set_backlight(struct udevice *dev, int percent)
dcs_write_one(dsi, 0x55, 0x80);
dcs_write_one(dsi, 0x5e, 0x06);
- ret = backlight_enable(priv->backlight);
- if (ret)
- return ret;
-
/* Set backlight */
dcs_write_one(dsi, 0x51, 0x96);
- ret = backlight_set_brightness(priv->backlight, percent);
+ return 0;
+}
+
+static int endeavoru_panel_set_backlight(struct udevice *dev, int percent)
+{
+ struct endeavoru_panel_priv *priv = dev_get_priv(dev);
+ int ret;
+
+ ret = backlight_enable(priv->backlight);
if (ret)
return ret;
- return 0;
+ return backlight_set_brightness(priv->backlight, percent);
}
static int endeavoru_panel_timings(struct udevice *dev,
@@ -217,6 +168,63 @@ static int endeavoru_panel_of_to_plat(struct udevice *dev)
return 0;
}
+static int endeavoru_panel_hw_init(struct udevice *dev)
+{
+ struct endeavoru_panel_priv *priv = dev_get_priv(dev);
+ int ret;
+
+ ret = dm_gpio_set_value(&priv->reset_gpio, 1);
+ if (ret) {
+ log_debug("%s: error changing reset-gpios (%d)\n",
+ __func__, ret);
+ return ret;
+ }
+ mdelay(5);
+
+ ret = regulator_set_enable_if_allowed(priv->vddio, 1);
+ if (ret) {
+ log_debug("%s: error enabling iovcc-supply (%d)\n",
+ __func__, ret);
+ return ret;
+ }
+ mdelay(1);
+
+ ret = regulator_set_enable_if_allowed(priv->vdd, 1);
+ if (ret) {
+ log_debug("%s: error enabling vcc-supply (%d)\n",
+ __func__, ret);
+ return ret;
+ }
+ mdelay(20);
+
+ ret = dm_gpio_set_value(&priv->reset_gpio, 0);
+ if (ret) {
+ log_debug("%s: error changing reset-gpios (%d)\n",
+ __func__, ret);
+ return ret;
+ }
+ mdelay(2);
+
+ /* Reset panel */
+ ret = dm_gpio_set_value(&priv->reset_gpio, 1);
+ if (ret) {
+ log_debug("%s: error changing reset-gpios (%d)\n",
+ __func__, ret);
+ return ret;
+ }
+ mdelay(1);
+
+ ret = dm_gpio_set_value(&priv->reset_gpio, 0);
+ if (ret) {
+ log_debug("%s: error changing reset-gpios (%d)\n",
+ __func__, ret);
+ return ret;
+ }
+ mdelay(25);
+
+ return 0;
+}
+
static int endeavoru_panel_probe(struct udevice *dev)
{
struct mipi_dsi_panel_plat *plat = dev_get_plat(dev);
@@ -226,7 +234,7 @@ static int endeavoru_panel_probe(struct udevice *dev)
plat->format = MIPI_DSI_FMT_RGB888;
plat->mode_flags = MIPI_DSI_MODE_VIDEO;
- return 0;
+ return endeavoru_panel_hw_init(dev);
}
static const struct panel_ops endeavoru_panel_ops = {
--
2.40.1
More information about the U-Boot
mailing list