[PATCH v6 3/7] siemens draco: i2c: use driver model for u-boot

[Enrico Leto]

Add support for driver model where EEPROM data are read in draco board.

Reviewed-by: Alexander Sverdlin <alexander.sverdlin at siemens.com>
Signed-off-by: Enrico Leto <enrico.leto at siemens.com>
---
 configs/draco-etamin_defconfig   | 4 +++-
 configs/draco-rastaban_defconfig | 4 +++-
 configs/draco-thuban_defconfig   | 4 +++-
 3 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/configs/draco-etamin_defconfig b/configs/draco-etamin_defconfig
index a89494f9083..ec9331e625a 100644
--- a/configs/draco-etamin_defconfig
+++ b/configs/draco-etamin_defconfig
@@ -86,8 +86,10 @@ CONFIG_CLK=y
 CONFIG_CLK_TI_CTRL=y
 CONFIG_DFU_NAND=y
 CONFIG_SYS_DFU_DATA_BUF_SIZE=0x100000
-CONFIG_SYS_I2C_LEGACY=y
+CONFIG_DM_I2C=y
+# CONFIG_SPL_DM_I2C is not set
 CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
 # CONFIG_SPL_DM_MMC is not set
 CONFIG_MMC_OMAP_HS=y
 CONFIG_MTD=y
diff --git a/configs/draco-rastaban_defconfig b/configs/draco-rastaban_defconfig
index f4a9b860bf0..03fbe494901 100644
--- a/configs/draco-rastaban_defconfig
+++ b/configs/draco-rastaban_defconfig
@@ -84,8 +84,10 @@ CONFIG_CLK=y
 CONFIG_CLK_TI_CTRL=y
 CONFIG_DFU_NAND=y
 CONFIG_SYS_DFU_DATA_BUF_SIZE=0x100000
-CONFIG_SYS_I2C_LEGACY=y
+CONFIG_DM_I2C=y
+# CONFIG_SPL_DM_I2C is not set
 CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
diff --git a/configs/draco-thuban_defconfig b/configs/draco-thuban_defconfig
index cf2c46b3d20..fcc9b0380f4 100644
--- a/configs/draco-thuban_defconfig
+++ b/configs/draco-thuban_defconfig
@@ -84,8 +84,10 @@ CONFIG_CLK=y
 CONFIG_CLK_TI_CTRL=y
 CONFIG_DFU_NAND=y
 CONFIG_SYS_DFU_DATA_BUF_SIZE=0x100000
-CONFIG_SYS_I2C_LEGACY=y
+CONFIG_DM_I2C=y
+# CONFIG_SPL_DM_I2C is not set
 CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
-- 
2.30.2