[PATCH v4 5/7] configs: am62x_evm_*: Enable USB and DFU support

[Roger Quadros]

On 12/01/2024 12:44, Sjoerd Simons wrote:
> On Fri, 2024-01-12 at 11:58 +0200, Roger Quadros wrote:
>> Hi Sjoerd,
>>
>> On 12/01/2024 10:52, Sjoerd Simons wrote:
>>> Enable USB host as well as USB gadget and DFU support for a53; For
>>> the
>>> r5 due to the smaller available size create a config fragment for
>>> DFU
>>> supports which disables support for persistent storage to free up
>>> space
>>> for USB support
>>>
>>> Signed-off-by: Sjoerd Simons <sjoerd at collabora.com>
>>>
>>> ---
>>>
>>> Changes in v4:
>>> - Move R5 dfu config to a config fragment rather then a full
>>> defconfig
>>> - Don't enable XHCI for the R5 SPL, unneeded
>>>
>>> Changes in v3:
>>> - Run savedefconfig to adjust to more recent u-boot
>>>
>>> Changes in v2:
>>> - Create a seperate defconfig for R5
>>>
>>>  configs/am62x_evm_a53_defconfig | 30
>>> ++++++++++++++++++++++++++++++
>>>  configs/am62x_r5_usbdfu.config  | 28 ++++++++++++++++++++++++++++
>>>  2 files changed, 58 insertions(+)
>>>  create mode 100644 configs/am62x_r5_usbdfu.config
>>>
>>> diff --git a/configs/am62x_evm_a53_defconfig
>>> b/configs/am62x_evm_a53_defconfig
>>> index aa96c1b3125..f335eb11e63 100644
>>> --- a/configs/am62x_evm_a53_defconfig
>>> +++ b/configs/am62x_evm_a53_defconfig
>>> @@ -1,5 +1,6 @@
>>>  CONFIG_ARM=y
>>>  CONFIG_ARCH_K3=y
>>> +CONFIG_SYS_MALLOC_LEN=0x2000000
>>>  CONFIG_SYS_MALLOC_F_LEN=0x8000
>>>  CONFIG_SPL_LIBCOMMON_SUPPORT=y
>>>  CONFIG_SPL_LIBGENERIC_SUPPORT=y
>>> @@ -41,16 +42,23 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y
>>>  CONFIG_SPL_STACK_R=y
>>>  CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
>>>  CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
>>> +CONFIG_SPL_ENV_SUPPORT=y
>>>  CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
>>>  CONFIG_SPL_DM_MAILBOX=y
>>>  CONFIG_SPL_DM_SPI_FLASH=y
>>>  CONFIG_SPL_POWER_DOMAIN=y
>>> +CONFIG_SPL_RAM_SUPPORT=y
>>> +CONFIG_SPL_RAM_DEVICE=y
>>>  # CONFIG_SPL_SPI_FLASH_TINY is not set
>>>  CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
>>>  CONFIG_SPL_SPI_LOAD=y
>>>  CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000
>>> +CONFIG_SPL_USB_GADGET=y
>>> +CONFIG_SPL_DFU=y
>>>  CONFIG_SPL_YMODEM_SUPPORT=y
>>> +CONFIG_CMD_DFU=y
>>>  CONFIG_CMD_MMC=y
>>> +CONFIG_CMD_USB=y
>>>  CONFIG_OF_CONTROL=y
>>>  CONFIG_SPL_OF_CONTROL=y
>>>  CONFIG_MULTI_DTB_FIT=y
>>> @@ -61,10 +69,17 @@ CONFIG_SPL_DM=y
>>>  CONFIG_SPL_DM_SEQ_ALIAS=y
>>>  CONFIG_REGMAP=y
>>>  CONFIG_SPL_REGMAP=y
>>> +CONFIG_SYSCON=y
>>> +CONFIG_SPL_SYSCON=y
>>>  CONFIG_SPL_OF_TRANSLATE=y
>>>  CONFIG_CLK=y
>>>  CONFIG_SPL_CLK=y
>>>  CONFIG_CLK_TI_SCI=y
>>> +CONFIG_DFU_MMC=y
>>> +CONFIG_DFU_RAM=y
>>> +CONFIG_DFU_SF=y
>>> +CONFIG_SYS_DFU_DATA_BUF_SIZE=0x5000
>>> +CONFIG_SYS_DFU_MAX_FILE_SIZE=0x800000
>>>  CONFIG_DMA_CHANNELS=y
>>>  CONFIG_TI_K3_NAVSS_UDMA=y
>>>  CONFIG_TI_SCI_PROTOCOL=y
>>> @@ -103,4 +118,19 @@ CONFIG_CADENCE_QSPI=y
>>>  CONFIG_SYSRESET=y
>>>  CONFIG_SPL_SYSRESET=y
>>>  CONFIG_SYSRESET_TI_SCI=y
>>> +CONFIG_USB=y
>>> +CONFIG_DM_USB_GADGET=y
>>> +CONFIG_SPL_DM_USB_GADGET=y
>>> +CONFIG_USB_XHCI_HCD=y
>>> +CONFIG_USB_XHCI_DWC3=y
>>> +CONFIG_USB_DWC3=y
>>> +CONFIG_USB_DWC3_GENERIC=y
>>> +CONFIG_SPL_USB_DWC3_GENERIC=y
>>> +CONFIG_SPL_USB_DWC3_AM62=y
>>> +CONFIG_USB_DWC3_AM62=y
>>> +CONFIG_USB_GADGET=y
>>> +CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
>>> +CONFIG_USB_GADGET_VENDOR_NUM=0x0451
>>> +CONFIG_USB_GADGET_PRODUCT_NUM=0x6165
>>> +CONFIG_USB_GADGET_DOWNLOAD=y
>>>  CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
>>> diff --git a/configs/am62x_r5_usbdfu.config
>>> b/configs/am62x_r5_usbdfu.config
>>> new file mode 100644
>>> index 00000000000..772bb2ab935
>>> --- /dev/null
>>> +++ b/configs/am62x_r5_usbdfu.config
>>> @@ -0,0 +1,28 @@
>>> +CONFIG_SPL_ENV_SUPPORT=y
>>> +CONFIG_SYSCON=y
>>> +CONFIG_SPL_SYSCON=y
>>> +CONFIG_SYS_DFU_DATA_BUF_SIZE=0x5000
>>> +CONFIG_MISC=y
>>> +CONFIG_USB=y
>>> +CONFIG_DM_USB_GADGET=y
>>> +CONFIG_SPL_DM_USB_GADGET=y
>>> +CONFIG_USB_DWC3=y
>>> +CONFIG_USB_DWC3_GENERIC=y
>>> +CONFIG_SPL_USB_DWC3_GENERIC=y
>>> +CONFIG_SPL_USB_DWC3_AM62=y
>>> +CONFIG_USB_GADGET=y
>>> +CONFIG_SPL_USB_GADGET=y
>>> +CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
>>> +CONFIG_USB_GADGET_VENDOR_NUM=0x0451
>>> +CONFIG_USB_GADGET_PRODUCT_NUM=0x6165
>>> +CONFIG_USB_GADGET_DOWNLOAD=y
>>> +CONFIG_SPL_DFU=y
>>
>> Why do we need USB DFU support at R5 SPL stage?
>> What is the use case?
> 
> So we can load the A53 SPL over DFU ? There is no way to get a full DFU
> bootchain without the R5 also taking part 
> 
> 
Got it. I should have read the documentation in patch 7 before asking. ;)

-- 
cheers,
-roger