[PATCH v4 5/7] configs: am62x_evm_*: Enable USB and DFU support

[Sjoerd Simons]

On Fri, 2024-01-12 at 11:58 +0200, Roger Quadros wrote:
> Hi Sjoerd,
> 
> On 12/01/2024 10:52, Sjoerd Simons wrote:
> > Enable USB host as well as USB gadget and DFU support for a53; For
> > the
> > r5 due to the smaller available size create a config fragment for
> > DFU
> > supports which disables support for persistent storage to free up
> > space
> > for USB support
> > 
> > Signed-off-by: Sjoerd Simons <sjoerd at collabora.com>
> > 
> > ---
> > 
> > Changes in v4:
> > - Move R5 dfu config to a config fragment rather then a full
> > defconfig
> > - Don't enable XHCI for the R5 SPL, unneeded
> > 
> > Changes in v3:
> > - Run savedefconfig to adjust to more recent u-boot
> > 
> > Changes in v2:
> > - Create a seperate defconfig for R5
> > 
> >  configs/am62x_evm_a53_defconfig | 30
> > ++++++++++++++++++++++++++++++
> >  configs/am62x_r5_usbdfu.config  | 28 ++++++++++++++++++++++++++++
> >  2 files changed, 58 insertions(+)
> >  create mode 100644 configs/am62x_r5_usbdfu.config
> > 
> > diff --git a/configs/am62x_evm_a53_defconfig
> > b/configs/am62x_evm_a53_defconfig
> > index aa96c1b3125..f335eb11e63 100644
> > --- a/configs/am62x_evm_a53_defconfig
> > +++ b/configs/am62x_evm_a53_defconfig
> > @@ -1,5 +1,6 @@
> >  CONFIG_ARM=y
> >  CONFIG_ARCH_K3=y
> > +CONFIG_SYS_MALLOC_LEN=0x2000000
> >  CONFIG_SYS_MALLOC_F_LEN=0x8000
> >  CONFIG_SPL_LIBCOMMON_SUPPORT=y
> >  CONFIG_SPL_LIBGENERIC_SUPPORT=y
> > @@ -41,16 +42,23 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y
> >  CONFIG_SPL_STACK_R=y
> >  CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
> >  CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
> > +CONFIG_SPL_ENV_SUPPORT=y
> >  CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
> >  CONFIG_SPL_DM_MAILBOX=y
> >  CONFIG_SPL_DM_SPI_FLASH=y
> >  CONFIG_SPL_POWER_DOMAIN=y
> > +CONFIG_SPL_RAM_SUPPORT=y
> > +CONFIG_SPL_RAM_DEVICE=y
> >  # CONFIG_SPL_SPI_FLASH_TINY is not set
> >  CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
> >  CONFIG_SPL_SPI_LOAD=y
> >  CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000
> > +CONFIG_SPL_USB_GADGET=y
> > +CONFIG_SPL_DFU=y
> >  CONFIG_SPL_YMODEM_SUPPORT=y
> > +CONFIG_CMD_DFU=y
> >  CONFIG_CMD_MMC=y
> > +CONFIG_CMD_USB=y
> >  CONFIG_OF_CONTROL=y
> >  CONFIG_SPL_OF_CONTROL=y
> >  CONFIG_MULTI_DTB_FIT=y
> > @@ -61,10 +69,17 @@ CONFIG_SPL_DM=y
> >  CONFIG_SPL_DM_SEQ_ALIAS=y
> >  CONFIG_REGMAP=y
> >  CONFIG_SPL_REGMAP=y
> > +CONFIG_SYSCON=y
> > +CONFIG_SPL_SYSCON=y
> >  CONFIG_SPL_OF_TRANSLATE=y
> >  CONFIG_CLK=y
> >  CONFIG_SPL_CLK=y
> >  CONFIG_CLK_TI_SCI=y
> > +CONFIG_DFU_MMC=y
> > +CONFIG_DFU_RAM=y
> > +CONFIG_DFU_SF=y
> > +CONFIG_SYS_DFU_DATA_BUF_SIZE=0x5000
> > +CONFIG_SYS_DFU_MAX_FILE_SIZE=0x800000
> >  CONFIG_DMA_CHANNELS=y
> >  CONFIG_TI_K3_NAVSS_UDMA=y
> >  CONFIG_TI_SCI_PROTOCOL=y
> > @@ -103,4 +118,19 @@ CONFIG_CADENCE_QSPI=y
> >  CONFIG_SYSRESET=y
> >  CONFIG_SPL_SYSRESET=y
> >  CONFIG_SYSRESET_TI_SCI=y
> > +CONFIG_USB=y
> > +CONFIG_DM_USB_GADGET=y
> > +CONFIG_SPL_DM_USB_GADGET=y
> > +CONFIG_USB_XHCI_HCD=y
> > +CONFIG_USB_XHCI_DWC3=y
> > +CONFIG_USB_DWC3=y
> > +CONFIG_USB_DWC3_GENERIC=y
> > +CONFIG_SPL_USB_DWC3_GENERIC=y
> > +CONFIG_SPL_USB_DWC3_AM62=y
> > +CONFIG_USB_DWC3_AM62=y
> > +CONFIG_USB_GADGET=y
> > +CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
> > +CONFIG_USB_GADGET_VENDOR_NUM=0x0451
> > +CONFIG_USB_GADGET_PRODUCT_NUM=0x6165
> > +CONFIG_USB_GADGET_DOWNLOAD=y
> >  CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
> > diff --git a/configs/am62x_r5_usbdfu.config
> > b/configs/am62x_r5_usbdfu.config
> > new file mode 100644
> > index 00000000000..772bb2ab935
> > --- /dev/null
> > +++ b/configs/am62x_r5_usbdfu.config
> > @@ -0,0 +1,28 @@
> > +CONFIG_SPL_ENV_SUPPORT=y
> > +CONFIG_SYSCON=y
> > +CONFIG_SPL_SYSCON=y
> > +CONFIG_SYS_DFU_DATA_BUF_SIZE=0x5000
> > +CONFIG_MISC=y
> > +CONFIG_USB=y
> > +CONFIG_DM_USB_GADGET=y
> > +CONFIG_SPL_DM_USB_GADGET=y
> > +CONFIG_USB_DWC3=y
> > +CONFIG_USB_DWC3_GENERIC=y
> > +CONFIG_SPL_USB_DWC3_GENERIC=y
> > +CONFIG_SPL_USB_DWC3_AM62=y
> > +CONFIG_USB_GADGET=y
> > +CONFIG_SPL_USB_GADGET=y
> > +CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
> > +CONFIG_USB_GADGET_VENDOR_NUM=0x0451
> > +CONFIG_USB_GADGET_PRODUCT_NUM=0x6165
> > +CONFIG_USB_GADGET_DOWNLOAD=y
> > +CONFIG_SPL_DFU=y
> 
> Why do we need USB DFU support at R5 SPL stage?
> What is the use case?

So we can load the A53 SPL over DFU ? There is no way to get a full DFU
bootchain without the R5 also taking part 


-- 
Sjoerd Simons
Collabora Ltd.