[PATCH v2 3/7] video: bridge: add Toshiba TC358768 RGB to DSI bridge support
Svyatoslav Ryhel
clamor95 at gmail.com
Wed Jan 31 07:57:17 CET 2024
Add initial support for the Toshiba TC358768 RGB to DSI bridge.
The driver is based on the mainline Linux Toshiba TC358768
bridge driver and implements the same set of features.
Tested-by: Andreas Westman Dorcsak <hedmoo at yahoo.com> # ASUS TF700T
Signed-off-by: Svyatoslav Ryhel <clamor95 at gmail.com>
---
drivers/video/bridge/Kconfig | 9 +
drivers/video/bridge/Makefile | 1 +
drivers/video/bridge/tc358768.c | 985 ++++++++++++++++++++++++++++++++
3 files changed, 995 insertions(+)
create mode 100644 drivers/video/bridge/tc358768.c
diff --git a/drivers/video/bridge/Kconfig b/drivers/video/bridge/Kconfig
index 2311ca2d1a..6a9e7c1454 100644
--- a/drivers/video/bridge/Kconfig
+++ b/drivers/video/bridge/Kconfig
@@ -40,3 +40,12 @@ config VIDEO_BRIDGE_SOLOMON_SSD2825
select VIDEO_MIPI_DSI
help
Solomon SSD2824 SPI RGB-DSI bridge driver wrapped into panel uClass.
+
+config VIDEO_BRIDGE_TOSHIBA_TC358768
+ bool "Support Toshiba TC358768 MIPI DSI bridge"
+ depends on PANEL && DM_GPIO
+ select VIDEO_MIPI_DSI
+ select DM_I2C
+ help
+ Toshiba TC358768AXBG/TC358778XBG DSI bridge chip driver.
+ Found in Asus Transformer Infinity TF700T.
diff --git a/drivers/video/bridge/Makefile b/drivers/video/bridge/Makefile
index 22625c8bc6..ed3e7e9ce1 100644
--- a/drivers/video/bridge/Makefile
+++ b/drivers/video/bridge/Makefile
@@ -8,3 +8,4 @@ obj-$(CONFIG_VIDEO_BRIDGE_PARADE_PS862X) += ps862x.o
obj-$(CONFIG_VIDEO_BRIDGE_NXP_PTN3460) += ptn3460.o
obj-$(CONFIG_VIDEO_BRIDGE_ANALOGIX_ANX6345) += anx6345.o
obj-$(CONFIG_VIDEO_BRIDGE_SOLOMON_SSD2825) += ssd2825.o
+obj-$(CONFIG_VIDEO_BRIDGE_TOSHIBA_TC358768) += tc358768.o
diff --git a/drivers/video/bridge/tc358768.c b/drivers/video/bridge/tc358768.c
new file mode 100644
index 0000000000..19b6ca29d3
--- /dev/null
+++ b/drivers/video/bridge/tc358768.c
@@ -0,0 +1,985 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Texas Instruments Incorporated
+ * Copyright (C) 2022 Svyatoslav Ryhel <clamor95 at gmail.com>
+ */
+
+#include <clk.h>
+#include <dm.h>
+#include <i2c.h>
+#include <log.h>
+#include <mipi_display.h>
+#include <mipi_dsi.h>
+#include <backlight.h>
+#include <panel.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/math64.h>
+#include <power/regulator.h>
+
+#include <asm/gpio.h>
+
+/* Global (16-bit addressable) */
+#define TC358768_CHIPID 0x0000
+#define TC358768_SYSCTL 0x0002
+#define TC358768_CONFCTL 0x0004
+#define TC358768_VSDLY 0x0006
+#define TC358768_DATAFMT 0x0008
+#define TC358768_GPIOEN 0x000E
+#define TC358768_GPIODIR 0x0010
+#define TC358768_GPIOIN 0x0012
+#define TC358768_GPIOOUT 0x0014
+#define TC358768_PLLCTL0 0x0016
+#define TC358768_PLLCTL1 0x0018
+#define TC358768_CMDBYTE 0x0022
+#define TC358768_PP_MISC 0x0032
+#define TC358768_DSITX_DT 0x0050
+#define TC358768_FIFOSTATUS 0x00F8
+
+/* Debug (16-bit addressable) */
+#define TC358768_VBUFCTRL 0x00E0
+#define TC358768_DBG_WIDTH 0x00E2
+#define TC358768_DBG_VBLANK 0x00E4
+#define TC358768_DBG_DATA 0x00E8
+
+/* TX PHY (32-bit addressable) */
+#define TC358768_CLW_DPHYCONTTX 0x0100
+#define TC358768_D0W_DPHYCONTTX 0x0104
+#define TC358768_D1W_DPHYCONTTX 0x0108
+#define TC358768_D2W_DPHYCONTTX 0x010C
+#define TC358768_D3W_DPHYCONTTX 0x0110
+#define TC358768_CLW_CNTRL 0x0140
+#define TC358768_D0W_CNTRL 0x0144
+#define TC358768_D1W_CNTRL 0x0148
+#define TC358768_D2W_CNTRL 0x014C
+#define TC358768_D3W_CNTRL 0x0150
+
+/* TX PPI (32-bit addressable) */
+#define TC358768_STARTCNTRL 0x0204
+#define TC358768_DSITXSTATUS 0x0208
+#define TC358768_LINEINITCNT 0x0210
+#define TC358768_LPTXTIMECNT 0x0214
+#define TC358768_TCLK_HEADERCNT 0x0218
+#define TC358768_TCLK_TRAILCNT 0x021C
+#define TC358768_THS_HEADERCNT 0x0220
+#define TC358768_TWAKEUP 0x0224
+#define TC358768_TCLK_POSTCNT 0x0228
+#define TC358768_THS_TRAILCNT 0x022C
+#define TC358768_HSTXVREGCNT 0x0230
+#define TC358768_HSTXVREGEN 0x0234
+#define TC358768_TXOPTIONCNTRL 0x0238
+#define TC358768_BTACNTRL1 0x023C
+
+/* TX CTRL (32-bit addressable) */
+#define TC358768_DSI_CONTROL 0x040C
+#define TC358768_DSI_STATUS 0x0410
+#define TC358768_DSI_INT 0x0414
+#define TC358768_DSI_INT_ENA 0x0418
+#define TC358768_DSICMD_RDFIFO 0x0430
+#define TC358768_DSI_ACKERR 0x0434
+#define TC358768_DSI_ACKERR_INTENA 0x0438
+#define TC358768_DSI_ACKERR_HALT 0x043c
+#define TC358768_DSI_RXERR 0x0440
+#define TC358768_DSI_RXERR_INTENA 0x0444
+#define TC358768_DSI_RXERR_HALT 0x0448
+#define TC358768_DSI_ERR 0x044C
+#define TC358768_DSI_ERR_INTENA 0x0450
+#define TC358768_DSI_ERR_HALT 0x0454
+#define TC358768_DSI_CONFW 0x0500
+#define TC358768_DSI_LPCMD 0x0500
+#define TC358768_DSI_RESET 0x0504
+#define TC358768_DSI_INT_CLR 0x050C
+#define TC358768_DSI_START 0x0518
+
+/* DSITX CTRL (16-bit addressable) */
+#define TC358768_DSICMD_TX 0x0600
+#define TC358768_DSICMD_TYPE 0x0602
+#define TC358768_DSICMD_WC 0x0604
+#define TC358768_DSICMD_WD0 0x0610
+#define TC358768_DSICMD_WD1 0x0612
+#define TC358768_DSICMD_WD2 0x0614
+#define TC358768_DSICMD_WD3 0x0616
+#define TC358768_DSI_EVENT 0x0620
+#define TC358768_DSI_VSW 0x0622
+#define TC358768_DSI_VBPR 0x0624
+#define TC358768_DSI_VACT 0x0626
+#define TC358768_DSI_HSW 0x0628
+#define TC358768_DSI_HBPR 0x062A
+#define TC358768_DSI_HACT 0x062C
+
+/* TC358768_DSI_CONTROL (0x040C) register */
+#define TC358768_DSI_CONTROL_DIS_MODE BIT(15)
+#define TC358768_DSI_CONTROL_TXMD BIT(7)
+#define TC358768_DSI_CONTROL_HSCKMD BIT(5)
+#define TC358768_DSI_CONTROL_EOTDIS BIT(0)
+
+/* TC358768_DSI_CONFW (0x0500) register */
+#define TC358768_DSI_CONFW_MODE_SET (5 << 29)
+#define TC358768_DSI_CONFW_MODE_CLR (6 << 29)
+#define TC358768_DSI_CONFW_ADDR_DSI_CONTROL (3 << 24)
+
+#define NANO 1000000000UL
+#define PICO 1000000000000ULL
+
+struct tc358768_priv {
+ struct mipi_dsi_host host;
+ struct mipi_dsi_device device;
+
+ struct udevice *panel;
+ struct display_timing timing;
+
+ struct udevice *vddc;
+ struct udevice *vddmipi;
+ struct udevice *vddio;
+
+ struct clk *refclk;
+
+ struct gpio_desc reset_gpio;
+
+ u32 pd_lines; /* number of Parallel Port Input Data Lines */
+ u32 dsi_lanes; /* number of DSI Lanes */
+
+ /* Parameters for PLL programming */
+ u32 fbd; /* PLL feedback divider */
+ u32 prd; /* PLL input divider */
+ u32 frs; /* PLL Freqency range for HSCK (post divider) */
+
+ u32 dsiclk; /* pll_clk / 2 */
+};
+
+static void tc358768_read(struct udevice *dev, u32 reg, u32 *val)
+{
+ int count;
+ u8 buf[4] = { 0, 0, 0, 0 };
+
+ /* 16-bit register? */
+ if (reg < 0x100 || reg >= 0x600)
+ count = 2;
+ else
+ count = 4;
+
+ dm_i2c_read(dev, reg, buf, count);
+ *val = (buf[0] << 8) | (buf[1] & 0xff) |
+ (buf[2] << 24) | (buf[3] << 16);
+
+ log_debug("%s 0x%04x >> 0x%08x\n",
+ __func__, reg, *val);
+}
+
+static void tc358768_write(struct udevice *dev, u32 reg, u32 val)
+{
+ int count;
+ u8 buf[4];
+
+ /* 16-bit register? */
+ if (reg < 0x100 || reg >= 0x600)
+ count = 2;
+ else
+ count = 4;
+
+ buf[0] = val >> 8;
+ buf[1] = val & 0xff;
+ buf[2] = val >> 24;
+ buf[3] = val >> 16;
+
+ log_debug("%s 0x%04x << 0x%08x\n",
+ __func__, reg, val);
+
+ dm_i2c_write(dev, reg, buf, count);
+}
+
+static void tc358768_update_bits(struct udevice *dev, u32 reg, u32 mask,
+ u32 val)
+{
+ u32 tmp, orig;
+
+ tc358768_read(dev, reg, &orig);
+
+ tmp = orig & ~mask;
+ tmp |= val & mask;
+ if (tmp != orig)
+ tc358768_write(dev, reg, tmp);
+}
+
+static ssize_t tc358768_dsi_host_transfer(struct mipi_dsi_host *host,
+ const struct mipi_dsi_msg *msg)
+{
+ struct udevice *dev = (struct udevice *)host->dev;
+ struct mipi_dsi_packet packet;
+ int ret;
+
+ if (msg->rx_len) {
+ log_debug("%s: MIPI rx is not supported\n", __func__);
+ return -EOPNOTSUPP;
+ }
+
+ if (msg->tx_len > 8) {
+ log_debug("%s: Maximum 8 byte MIPI tx is supported\n", __func__);
+ return -EOPNOTSUPP;
+ }
+
+ ret = mipi_dsi_create_packet(&packet, msg);
+ if (ret)
+ return ret;
+
+ if (mipi_dsi_packet_format_is_short(msg->type)) {
+ tc358768_write(dev, TC358768_DSICMD_TYPE,
+ (0x10 << 8) | (packet.header[0] & 0x3f));
+ tc358768_write(dev, TC358768_DSICMD_WC, 0);
+ tc358768_write(dev, TC358768_DSICMD_WD0,
+ (packet.header[2] << 8) | packet.header[1]);
+ } else {
+ int i;
+
+ tc358768_write(dev, TC358768_DSICMD_TYPE,
+ (0x40 << 8) | (packet.header[0] & 0x3f));
+ tc358768_write(dev, TC358768_DSICMD_WC, packet.payload_length);
+ for (i = 0; i < packet.payload_length; i += 2) {
+ u16 val = packet.payload[i];
+
+ if (i + 1 < packet.payload_length)
+ val |= packet.payload[i + 1] << 8;
+
+ tc358768_write(dev, TC358768_DSICMD_WD0 + i, val);
+ }
+ }
+
+ /* start transfer */
+ tc358768_write(dev, TC358768_DSICMD_TX, 1);
+
+ return packet.size;
+}
+
+static const struct mipi_dsi_host_ops tc358768_dsi_host_ops = {
+ .transfer = tc358768_dsi_host_transfer,
+};
+
+static void tc358768_sw_reset(struct udevice *dev)
+{
+ /* Assert Reset */
+ tc358768_write(dev, TC358768_SYSCTL, 1);
+ mdelay(5);
+
+ /* Release Reset, Exit Sleep */
+ tc358768_write(dev, TC358768_SYSCTL, 0);
+}
+
+static void tc358768_hw_enable(struct tc358768_priv *priv)
+{
+ int ret;
+
+ ret = clk_prepare_enable(priv->refclk);
+ if (ret)
+ log_debug("%s: error enabling refclk (%d)\n", __func__, ret);
+
+ ret = regulator_set_enable_if_allowed(priv->vddc, true);
+ if (ret)
+ log_debug("%s: error enabling vddc (%d)\n", __func__, ret);
+
+ ret = regulator_set_enable_if_allowed(priv->vddmipi, true);
+ if (ret)
+ log_debug("%s: error enabling vddmipi (%d)\n", __func__, ret);
+
+ mdelay(10);
+
+ ret = regulator_set_enable_if_allowed(priv->vddio, true);
+ if (ret)
+ log_debug("%s: error enabling vddio (%d)\n", __func__, ret);
+
+ mdelay(2);
+
+ /*
+ * The RESX is active low (GPIO_ACTIVE_LOW).
+ * DEASSERT (value = 0) the reset_gpio to enable the chip
+ */
+ ret = dm_gpio_set_value(&priv->reset_gpio, 0);
+ if (ret)
+ log_debug("%s: error changing reset-gpio (%d)\n", __func__, ret);
+
+ /* wait for encoder clocks to stabilize */
+ mdelay(2);
+}
+
+static u32 tc358768_pclk_to_pll(struct tc358768_priv *priv, u32 pclk)
+{
+ return (u32)div_u64((u64)pclk * priv->pd_lines, priv->dsi_lanes);
+}
+
+static int tc358768_calc_pll(struct tc358768_priv *priv,
+ struct display_timing *dt)
+{
+ static const u32 frs_limits[] = {
+ 1000000000,
+ 500000000,
+ 250000000,
+ 125000000,
+ 62500000
+ };
+ unsigned long refclk;
+ u32 prd, target_pll, i, max_pll, min_pll;
+ u32 frs, best_diff, best_pll, best_prd, best_fbd;
+
+ target_pll = tc358768_pclk_to_pll(priv, dt->pixelclock.typ);
+
+ /* pll_clk = RefClk * FBD / PRD * (1 / (2^FRS)) */
+
+ for (i = 0; i < ARRAY_SIZE(frs_limits); i++)
+ if (target_pll >= frs_limits[i])
+ break;
+
+ if (i == ARRAY_SIZE(frs_limits) || i == 0)
+ return -EINVAL;
+
+ frs = i - 1;
+ max_pll = frs_limits[i - 1];
+ min_pll = frs_limits[i];
+
+ refclk = clk_get_rate(priv->refclk);
+
+ best_diff = UINT_MAX;
+ best_pll = 0;
+ best_prd = 0;
+ best_fbd = 0;
+
+ for (prd = 1; prd <= 16; ++prd) {
+ u32 divisor = prd * (1 << frs);
+ u32 fbd;
+
+ for (fbd = 1; fbd <= 512; ++fbd) {
+ u32 pll, diff, pll_in;
+
+ pll = (u32)div_u64((u64)refclk * fbd, divisor);
+
+ if (pll >= max_pll || pll < min_pll)
+ continue;
+
+ pll_in = (u32)div_u64((u64)refclk, prd);
+ if (pll_in < 4000000)
+ continue;
+
+ diff = max(pll, target_pll) - min(pll, target_pll);
+
+ if (diff < best_diff) {
+ best_diff = diff;
+ best_pll = pll;
+ best_prd = prd;
+ best_fbd = fbd;
+
+ if (best_diff == 0)
+ goto found;
+ }
+ }
+ }
+
+ if (best_diff == UINT_MAX) {
+ log_debug("%s: could not find suitable PLL setup\n", __func__);
+ return -EINVAL;
+ }
+
+found:
+ priv->fbd = best_fbd;
+ priv->prd = best_prd;
+ priv->frs = frs;
+ priv->dsiclk = best_pll / 2;
+
+ return 0;
+}
+
+static void tc358768_setup_pll(struct udevice *dev)
+{
+ struct tc358768_priv *priv = dev_get_priv(dev);
+ u32 fbd, prd, frs;
+ int ret;
+
+ ret = tc358768_calc_pll(priv, &priv->timing);
+ if (ret)
+ log_debug("%s: PLL calculation failed: %d\n", __func__, ret);
+
+ fbd = priv->fbd;
+ prd = priv->prd;
+ frs = priv->frs;
+
+ log_debug("%s: PLL: refclk %lu, fbd %u, prd %u, frs %u\n", __func__,
+ clk_get_rate(priv->refclk), fbd, prd, frs);
+ log_debug("%s: PLL: pll_clk: %u, DSIClk %u, HSByteClk %u\n", __func__,
+ priv->dsiclk * 2, priv->dsiclk, priv->dsiclk / 4);
+
+ /* PRD[15:12] FBD[8:0] */
+ tc358768_write(dev, TC358768_PLLCTL0, ((prd - 1) << 12) | (fbd - 1));
+
+ /* FRS[11:10] LBWS[9:8] CKEN[4] RESETB[1] EN[0] */
+ tc358768_write(dev, TC358768_PLLCTL1,
+ (frs << 10) | (0x2 << 8) | BIT(1) | BIT(0));
+
+ /* wait for lock */
+ mdelay(5);
+
+ /* FRS[11:10] LBWS[9:8] CKEN[4] PLL_CKEN[4] RESETB[1] EN[0] */
+ tc358768_write(dev, TC358768_PLLCTL1,
+ (frs << 10) | (0x2 << 8) | BIT(4) | BIT(1) | BIT(0));
+}
+
+static u32 tc358768_ns_to_cnt(u32 ns, u32 period_ps)
+{
+ return DIV_ROUND_UP(ns * 1000, period_ps);
+}
+
+static u32 tc358768_ps_to_ns(u32 ps)
+{
+ return ps / 1000;
+}
+
+static u32 tc358768_dpi_to_ns(u32 val, u32 pclk)
+{
+ return (u32)div_u64((u64)val * NANO, pclk);
+}
+
+/* Convert value in DPI pixel clock units to DSI byte count */
+static u32 tc358768_dpi_to_dsi_bytes(struct tc358768_priv *priv, u32 val)
+{
+ u64 m = (u64)val * priv->dsiclk / 4 * priv->dsi_lanes;
+ u64 n = priv->timing.pixelclock.typ;
+
+ return (u32)div_u64(m + n - 1, n);
+}
+
+static u32 tc358768_dsi_bytes_to_ns(struct tc358768_priv *priv, u32 val)
+{
+ u64 m = (u64)val * NANO;
+ u64 n = priv->dsiclk / 4 * priv->dsi_lanes;
+
+ return (u32)div_u64(m, n);
+}
+
+static int tc358768_attach(struct udevice *dev)
+{
+ struct tc358768_priv *priv = dev_get_priv(dev);
+ struct mipi_dsi_device *device = &priv->device;
+ struct display_timing *dt = &priv->timing;
+ u32 val, val2, lptxcnt, hact, data_type;
+ s32 raw_val;
+ u32 hsbyteclk_ps, dsiclk_ps, ui_ps;
+ u32 dsiclk, hsbyteclk;
+ int i;
+ /* In pixelclock units */
+ u32 dpi_htot, dpi_data_start;
+ /* In byte units */
+ u32 dsi_dpi_htot, dsi_dpi_data_start;
+ u32 dsi_hsw, dsi_hbp, dsi_hact, dsi_hfp;
+ const u32 dsi_hss = 4; /* HSS is a short packet (4 bytes) */
+ /* In hsbyteclk units */
+ u32 dsi_vsdly;
+ const u32 internal_dly = 40;
+
+ if (device->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS) {
+ debug("%s: Non-continuous mode unimplemented, falling back to continuous\n", __func__);
+ device->mode_flags &= ~MIPI_DSI_CLOCK_NON_CONTINUOUS;
+ }
+
+ tc358768_hw_enable(priv);
+ tc358768_sw_reset(dev);
+
+ tc358768_setup_pll(dev);
+
+ dsiclk = priv->dsiclk;
+ hsbyteclk = dsiclk / 4;
+
+ /* Data Format Control Register */
+ val = BIT(2) | BIT(1) | BIT(0); /* rdswap_en | dsitx_en | txdt_en */
+ switch (device->format) {
+ case MIPI_DSI_FMT_RGB888:
+ val |= (0x3 << 4);
+ hact = dt->hactive.typ * 3;
+ data_type = MIPI_DSI_PACKED_PIXEL_STREAM_24;
+ break;
+ case MIPI_DSI_FMT_RGB666:
+ val |= (0x4 << 4);
+ hact = dt->hactive.typ * 3;
+ data_type = MIPI_DSI_PACKED_PIXEL_STREAM_18;
+ break;
+ case MIPI_DSI_FMT_RGB666_PACKED:
+ val |= (0x4 << 4) | BIT(3);
+ hact = dt->hactive.typ * 18 / 8;
+ data_type = MIPI_DSI_PIXEL_STREAM_3BYTE_18;
+ break;
+ case MIPI_DSI_FMT_RGB565:
+ val |= (0x5 << 4);
+ hact = dt->hactive.typ * 2;
+ data_type = MIPI_DSI_PACKED_PIXEL_STREAM_16;
+ break;
+ default:
+ log_debug("%s: Invalid data format (%u)\n",
+ __func__, device->format);
+ return -EINVAL;
+ }
+
+ /*
+ * There are three important things to make TC358768 work correctly,
+ * which are not trivial to manage:
+ *
+ * 1. Keep the DPI line-time and the DSI line-time as close to each
+ * other as possible.
+ * 2. TC358768 goes to LP mode after each line's active area. The DSI
+ * HFP period has to be long enough for entering and exiting LP mode.
+ * But it is not clear how to calculate this.
+ * 3. VSDly (video start delay) has to be long enough to ensure that the
+ * DSI TX does not start transmitting until we have started receiving
+ * pixel data from the DPI input. It is not clear how to calculate
+ * this either.
+ */
+
+ dpi_htot = dt->hactive.typ + dt->hfront_porch.typ +
+ dt->hsync_len.typ + dt->hback_porch.typ;
+ dpi_data_start = dt->hsync_len.typ + dt->hback_porch.typ;
+
+ log_debug("%s: dpi horiz timing (pclk): %u + %u + %u + %u = %u\n", __func__,
+ dt->hsync_len.typ, dt->hback_porch.typ, dt->hactive.typ,
+ dt->hfront_porch.typ, dpi_htot);
+
+ log_debug("%s: dpi horiz timing (ns): %u + %u + %u + %u = %u\n", __func__,
+ tc358768_dpi_to_ns(dt->hsync_len.typ, dt->pixelclock.typ),
+ tc358768_dpi_to_ns(dt->hback_porch.typ, dt->pixelclock.typ),
+ tc358768_dpi_to_ns(dt->hactive.typ, dt->pixelclock.typ),
+ tc358768_dpi_to_ns(dt->hfront_porch.typ, dt->pixelclock.typ),
+ tc358768_dpi_to_ns(dpi_htot, dt->pixelclock.typ));
+
+ log_debug("%s: dpi data start (ns): %u + %u = %u\n", __func__,
+ tc358768_dpi_to_ns(dt->hsync_len.typ, dt->pixelclock.typ),
+ tc358768_dpi_to_ns(dt->hback_porch.typ, dt->pixelclock.typ),
+ tc358768_dpi_to_ns(dpi_data_start, dt->pixelclock.typ));
+
+ dsi_dpi_htot = tc358768_dpi_to_dsi_bytes(priv, dpi_htot);
+ dsi_dpi_data_start = tc358768_dpi_to_dsi_bytes(priv, dpi_data_start);
+
+ if (device->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE) {
+ dsi_hsw = tc358768_dpi_to_dsi_bytes(priv, dt->hsync_len.typ);
+ dsi_hbp = tc358768_dpi_to_dsi_bytes(priv, dt->hback_porch.typ);
+ } else {
+ /* HBP is included in HSW in event mode */
+ dsi_hbp = 0;
+ dsi_hsw = tc358768_dpi_to_dsi_bytes(priv,
+ dt->hsync_len.typ +
+ dt->hback_porch.typ);
+
+ /*
+ * The pixel packet includes the actual pixel data, and:
+ * DSI packet header = 4 bytes
+ * DCS code = 1 byte
+ * DSI packet footer = 2 bytes
+ */
+ dsi_hact = hact + 4 + 1 + 2;
+
+ dsi_hfp = dsi_dpi_htot - dsi_hact - dsi_hsw - dsi_hss;
+
+ /*
+ * Here we should check if HFP is long enough for entering LP
+ * and exiting LP, but it's not clear how to calculate that.
+ * Instead, this is a naive algorithm that just adjusts the HFP
+ * and HSW so that HFP is (at least) roughly 2/3 of the total
+ * blanking time.
+ */
+ if (dsi_hfp < (dsi_hfp + dsi_hsw + dsi_hss) * 2 / 3) {
+ u32 old_hfp = dsi_hfp;
+ u32 old_hsw = dsi_hsw;
+ u32 tot = dsi_hfp + dsi_hsw + dsi_hss;
+
+ dsi_hsw = tot / 3;
+
+ /*
+ * Seems like sometimes HSW has to be divisible by num-lanes, but
+ * not always...
+ */
+ dsi_hsw = roundup(dsi_hsw, priv->dsi_lanes);
+
+ dsi_hfp = dsi_dpi_htot - dsi_hact - dsi_hsw - dsi_hss;
+
+ log_debug("%s: hfp too short, adjusting dsi hfp and dsi hsw from %u, %u to %u, %u\n",
+ __func__, old_hfp, old_hsw, dsi_hfp, dsi_hsw);
+ }
+
+ log_debug("%s: dsi horiz timing (bytes): %u, %u + %u + %u + %u = %u\n", __func__,
+ dsi_hss, dsi_hsw, dsi_hbp, dsi_hact, dsi_hfp,
+ dsi_hss + dsi_hsw + dsi_hbp + dsi_hact + dsi_hfp);
+
+ log_debug("%s: dsi horiz timing (ns): %u + %u + %u + %u + %u = %u\n", __func__,
+ tc358768_dsi_bytes_to_ns(priv, dsi_hss),
+ tc358768_dsi_bytes_to_ns(priv, dsi_hsw),
+ tc358768_dsi_bytes_to_ns(priv, dsi_hbp),
+ tc358768_dsi_bytes_to_ns(priv, dsi_hact),
+ tc358768_dsi_bytes_to_ns(priv, dsi_hfp),
+ tc358768_dsi_bytes_to_ns(priv, dsi_hss + dsi_hsw +
+ dsi_hbp + dsi_hact + dsi_hfp));
+ }
+
+ /* VSDly calculation */
+
+ /* Start with the HW internal delay */
+ dsi_vsdly = internal_dly;
+
+ /* Convert to byte units as the other variables are in byte units */
+ dsi_vsdly *= priv->dsi_lanes;
+
+ /* Do we need more delay, in addition to the internal? */
+ if (dsi_dpi_data_start > dsi_vsdly + dsi_hss + dsi_hsw + dsi_hbp) {
+ dsi_vsdly = dsi_dpi_data_start - dsi_hss - dsi_hsw - dsi_hbp;
+ dsi_vsdly = roundup(dsi_vsdly, priv->dsi_lanes);
+ }
+
+ log_debug("%s: dsi data start (bytes) %u + %u + %u + %u = %u\n", __func__,
+ dsi_vsdly, dsi_hss, dsi_hsw, dsi_hbp,
+ dsi_vsdly + dsi_hss + dsi_hsw + dsi_hbp);
+
+ log_debug("%s: dsi data start (ns) %u + %u + %u + %u = %u\n", __func__,
+ tc358768_dsi_bytes_to_ns(priv, dsi_vsdly),
+ tc358768_dsi_bytes_to_ns(priv, dsi_hss),
+ tc358768_dsi_bytes_to_ns(priv, dsi_hsw),
+ tc358768_dsi_bytes_to_ns(priv, dsi_hbp),
+ tc358768_dsi_bytes_to_ns(priv, dsi_vsdly + dsi_hss + dsi_hsw + dsi_hbp));
+
+ /* Convert back to hsbyteclk */
+ dsi_vsdly /= priv->dsi_lanes;
+
+ /*
+ * The docs say that there is an internal delay of 40 cycles.
+ * However, we get underflows if we follow that rule. If we
+ * instead ignore the internal delay, things work. So either
+ * the docs are wrong or the calculations are wrong.
+ *
+ * As a temporary fix, add the internal delay here, to counter
+ * the subtraction when writing the register.
+ */
+ dsi_vsdly += internal_dly;
+
+ /* Clamp to the register max */
+ if (dsi_vsdly - internal_dly > 0x3ff) {
+ log_warning("%s: VSDly too high, underflows likely\n", __func__);
+ dsi_vsdly = 0x3ff + internal_dly;
+ }
+
+ /* VSDly[9:0] */
+ tc358768_write(dev, TC358768_VSDLY, dsi_vsdly - internal_dly);
+
+ tc358768_write(dev, TC358768_DATAFMT, val);
+ tc358768_write(dev, TC358768_DSITX_DT, data_type);
+
+ /* Enable D-PHY (HiZ->LP11) */
+ tc358768_write(dev, TC358768_CLW_CNTRL, 0x0000);
+ /* Enable lanes */
+ for (i = 0; i < device->lanes; i++)
+ tc358768_write(dev, TC358768_D0W_CNTRL + i * 4, 0x0000);
+
+ /* Set up D-PHY CONTTX */
+ tc358768_write(dev, TC358768_CLW_DPHYCONTTX, 0x0203);
+ /* Adjust lanes */
+ for (i = 0; i < device->lanes; i++)
+ tc358768_write(dev, TC358768_D0W_DPHYCONTTX + i * 4, 0x0203);
+
+ /* DSI Timings */
+ hsbyteclk_ps = (u32)div_u64(PICO, hsbyteclk);
+ dsiclk_ps = (u32)div_u64(PICO, dsiclk);
+ ui_ps = dsiclk_ps / 2;
+ log_debug("%s: dsiclk: %u ps, ui %u ps, hsbyteclk %u ps\n",
+ __func__, dsiclk_ps, ui_ps, hsbyteclk_ps);
+
+ /* LP11 > 100us for D-PHY Rx Init */
+ val = tc358768_ns_to_cnt(100 * 1000, hsbyteclk_ps) - 1;
+ log_debug("%s: LINEINITCNT: 0x%x\n", __func__, val);
+ tc358768_write(dev, TC358768_LINEINITCNT, val);
+
+ /* LPTimeCnt > 50ns */
+ val = tc358768_ns_to_cnt(50, hsbyteclk_ps) - 1;
+ lptxcnt = val;
+ log_debug("%s: LPTXTIMECNT: 0x%x\n", __func__, val);
+ tc358768_write(dev, TC358768_LPTXTIMECNT, val);
+
+ /* 38ns < TCLK_PREPARE < 95ns */
+ val = tc358768_ns_to_cnt(65, hsbyteclk_ps) - 1;
+ log_debug("%s: TCLK_PREPARECNT: 0x%x\n", __func__, val);
+ /* TCLK_PREPARE + TCLK_ZERO > 300ns */
+ val2 = tc358768_ns_to_cnt(300 - tc358768_ps_to_ns(2 * ui_ps),
+ hsbyteclk_ps) - 2;
+ log_debug("%s: TCLK_ZEROCNT: 0x%x\n", __func__, val2);
+ val |= val2 << 8;
+ tc358768_write(dev, TC358768_TCLK_HEADERCNT, val);
+
+ /* TCLK_TRAIL > 60ns AND TEOT <= 105 ns + 12*UI */
+ raw_val = tc358768_ns_to_cnt(60 + tc358768_ps_to_ns(2 * ui_ps),
+ hsbyteclk_ps) - 5;
+ val = clamp(raw_val, 0, 127);
+ log_debug("%s: TCLK_TRAILCNT: 0x%x\n", __func__, val);
+ tc358768_write(dev, TC358768_TCLK_TRAILCNT, val);
+
+ /* 40ns + 4*UI < THS_PREPARE < 85ns + 6*UI */
+ val = 50 + tc358768_ps_to_ns(4 * ui_ps);
+ val = tc358768_ns_to_cnt(val, hsbyteclk_ps) - 1;
+ log_debug("%s: THS_PREPARECNT: 0x%x\n", __func__, val);
+ /* THS_PREPARE + THS_ZERO > 145ns + 10*UI */
+ raw_val = tc358768_ns_to_cnt(145 - tc358768_ps_to_ns(3 * ui_ps),
+ hsbyteclk_ps) - 10;
+ val2 = clamp(raw_val, 0, 127);
+ log_debug("%s: THS_ZEROCNT: 0x%x\n", __func__, val2);
+ val |= val2 << 8;
+ tc358768_write(dev, TC358768_THS_HEADERCNT, val);
+
+ /* TWAKEUP > 1ms in lptxcnt steps */
+ val = tc358768_ns_to_cnt(1020000, hsbyteclk_ps);
+ val = val / (lptxcnt + 1) - 1;
+ log_debug("%s: TWAKEUP: 0x%x\n", __func__, val);
+ tc358768_write(dev, TC358768_TWAKEUP, val);
+
+ /* TCLK_POSTCNT > 60ns + 52*UI */
+ val = tc358768_ns_to_cnt(60 + tc358768_ps_to_ns(52 * ui_ps),
+ hsbyteclk_ps) - 3;
+ log_debug("%s: TCLK_POSTCNT: 0x%x\n", __func__, val);
+ tc358768_write(dev, TC358768_TCLK_POSTCNT, val);
+
+ /* max(60ns + 4*UI, 8*UI) < THS_TRAILCNT < 105ns + 12*UI */
+ raw_val = tc358768_ns_to_cnt(60 + tc358768_ps_to_ns(18 * ui_ps),
+ hsbyteclk_ps) - 4;
+ val = clamp(raw_val, 0, 15);
+ log_debug("%s: THS_TRAILCNT: 0x%x\n", __func__, val);
+ tc358768_write(dev, TC358768_THS_TRAILCNT, val);
+
+ val = BIT(0);
+ for (i = 0; i < device->lanes; i++)
+ val |= BIT(i + 1);
+ tc358768_write(dev, TC358768_HSTXVREGEN, val);
+
+ tc358768_write(dev, TC358768_TXOPTIONCNTRL,
+ (device->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS) ? 0 : BIT(0));
+
+ /* TXTAGOCNT[26:16] RXTASURECNT[10:0] */
+ val = tc358768_ps_to_ns((lptxcnt + 1) * hsbyteclk_ps * 4);
+ val = tc358768_ns_to_cnt(val, hsbyteclk_ps) / 4 - 1;
+ log_debug("%s: TXTAGOCNT: 0x%x\n", __func__, val);
+ val2 = tc358768_ns_to_cnt(tc358768_ps_to_ns((lptxcnt + 1) * hsbyteclk_ps),
+ hsbyteclk_ps) - 2;
+ log_debug("%s: RXTASURECNT: 0x%x\n", __func__, val2);
+ val = val << 16 | val2;
+ tc358768_write(dev, TC358768_BTACNTRL1, val);
+
+ /* START[0] */
+ tc358768_write(dev, TC358768_STARTCNTRL, 1);
+
+ if (device->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE) {
+ /* Set pulse mode */
+ tc358768_write(dev, TC358768_DSI_EVENT, 0);
+
+ /* vact */
+ tc358768_write(dev, TC358768_DSI_VACT, dt->vactive.typ);
+ /* vsw */
+ tc358768_write(dev, TC358768_DSI_VSW, dt->vsync_len.typ);
+ /* vbp */
+ tc358768_write(dev, TC358768_DSI_VBPR, dt->vback_porch.typ);
+ } else {
+ /* Set event mode */
+ tc358768_write(dev, TC358768_DSI_EVENT, 1);
+
+ /* vact */
+ tc358768_write(dev, TC358768_DSI_VACT, dt->vactive.typ);
+
+ /* vsw (+ vbp) */
+ tc358768_write(dev, TC358768_DSI_VSW,
+ dt->vsync_len.typ + dt->vback_porch.typ);
+ /* vbp (not used in event mode) */
+ tc358768_write(dev, TC358768_DSI_VBPR, 0);
+ }
+
+ /* hsw (bytes) */
+ tc358768_write(dev, TC358768_DSI_HSW, dsi_hsw);
+
+ /* hbp (bytes) */
+ tc358768_write(dev, TC358768_DSI_HBPR, dsi_hbp);
+
+ /* hact (bytes) */
+ tc358768_write(dev, TC358768_DSI_HACT, hact);
+
+ /* VSYNC polarity */
+ tc358768_update_bits(dev, TC358768_CONFCTL, BIT(5),
+ (dt->flags & DISPLAY_FLAGS_VSYNC_HIGH) ? BIT(5) : 0);
+
+ /* HSYNC polarity */
+ tc358768_update_bits(dev, TC358768_PP_MISC, BIT(0),
+ (dt->flags & DISPLAY_FLAGS_HSYNC_LOW) ? BIT(0) : 0);
+
+ /* Start DSI Tx */
+ tc358768_write(dev, TC358768_DSI_START, 0x1);
+
+ /* Configure DSI_Control register */
+ val = TC358768_DSI_CONFW_MODE_CLR | TC358768_DSI_CONFW_ADDR_DSI_CONTROL;
+ val |= TC358768_DSI_CONTROL_TXMD | TC358768_DSI_CONTROL_HSCKMD |
+ 0x3 << 1 | TC358768_DSI_CONTROL_EOTDIS;
+ tc358768_write(dev, TC358768_DSI_CONFW, val);
+
+ val = TC358768_DSI_CONFW_MODE_SET | TC358768_DSI_CONFW_ADDR_DSI_CONTROL;
+ val |= (device->lanes - 1) << 1;
+
+ val |= TC358768_DSI_CONTROL_TXMD;
+
+ if (!(device->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS))
+ val |= TC358768_DSI_CONTROL_HSCKMD;
+
+ /*
+ * TODO: Actually MIPI_DSI_MODE_NO_EOT_PACKET
+ *
+ * Many of the DSI flags have names opposite to their
+ * actual effects, e.g. MIPI_DSI_MODE_EOT_PACKET means
+ * that EoT packets will actually be disabled.
+ */
+ if (device->mode_flags & MIPI_DSI_MODE_EOT_PACKET)
+ val |= TC358768_DSI_CONTROL_EOTDIS;
+
+ tc358768_write(dev, TC358768_DSI_CONFW, val);
+
+ val = TC358768_DSI_CONFW_MODE_CLR |
+ TC358768_DSI_CONFW_ADDR_DSI_CONTROL |
+ TC358768_DSI_CONTROL_DIS_MODE; /* DSI mode */
+ tc358768_write(dev, TC358768_DSI_CONFW, val);
+
+ /* clear FrmStop and RstPtr */
+ tc358768_update_bits(dev, TC358768_PP_MISC, 0x3 << 14, 0);
+
+ /* set PP_en */
+ tc358768_update_bits(dev, TC358768_CONFCTL, BIT(6), BIT(6));
+
+ /* Set up panel configuration */
+ return panel_enable_backlight(priv->panel);
+}
+
+static int tc358768_set_backlight(struct udevice *dev, int percent)
+{
+ struct tc358768_priv *priv = dev_get_priv(dev);
+
+ return panel_set_backlight(priv->panel, percent);
+}
+
+static int tc358768_panel_timings(struct udevice *dev,
+ struct display_timing *timing)
+{
+ struct tc358768_priv *priv = dev_get_priv(dev);
+
+ /* Default to positive sync */
+
+ if (!(priv->timing.flags &
+ (DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_HSYNC_HIGH)))
+ priv->timing.flags |= DISPLAY_FLAGS_HSYNC_HIGH;
+
+ if (!(priv->timing.flags &
+ (DISPLAY_FLAGS_VSYNC_LOW | DISPLAY_FLAGS_VSYNC_HIGH)))
+ priv->timing.flags |= DISPLAY_FLAGS_VSYNC_HIGH;
+
+ memcpy(timing, &priv->timing, sizeof(*timing));
+
+ return 0;
+}
+
+static int tc358768_setup(struct udevice *dev)
+{
+ struct tc358768_priv *priv = dev_get_priv(dev);
+ struct mipi_dsi_device *device = &priv->device;
+ struct mipi_dsi_panel_plat *mipi_plat;
+ int ret;
+
+ /* The bridge uses 16 bit registers */
+ ret = i2c_set_chip_offset_len(dev, 2);
+ if (ret) {
+ log_debug("%s: set_chip_offset_len failed: %d\n",
+ __func__, ret);
+ return ret;
+ }
+
+ ret = uclass_get_device_by_phandle(UCLASS_PANEL, dev,
+ "panel", &priv->panel);
+ if (ret) {
+ log_debug("%s: Cannot get panel: ret=%d\n", __func__, ret);
+ return log_ret(ret);
+ }
+
+ panel_get_display_timing(priv->panel, &priv->timing);
+
+ mipi_plat = dev_get_plat(priv->panel);
+ mipi_plat->device = device;
+
+ priv->host.dev = (struct device *)dev;
+ priv->host.ops = &tc358768_dsi_host_ops;
+
+ device->host = &priv->host;
+ device->lanes = mipi_plat->lanes;
+ device->format = mipi_plat->format;
+ device->mode_flags = mipi_plat->mode_flags;
+
+ priv->pd_lines = mipi_dsi_pixel_format_to_bpp(device->format);
+ priv->dsi_lanes = device->lanes;
+
+ /* get regulators */
+ ret = device_get_supply_regulator(dev, "vddc-supply", &priv->vddc);
+ if (ret) {
+ log_debug("%s: vddc regulator error: %d\n", __func__, ret);
+ if (ret != -ENOENT)
+ return log_ret(ret);
+ }
+
+ ret = device_get_supply_regulator(dev, "vddmipi-supply", &priv->vddmipi);
+ if (ret) {
+ log_debug("%s: vddmipi regulator error: %d\n", __func__, ret);
+ if (ret != -ENOENT)
+ return log_ret(ret);
+ }
+
+ ret = device_get_supply_regulator(dev, "vddio-supply", &priv->vddio);
+ if (ret) {
+ log_debug("%s: vddio regulator error: %d\n", __func__, ret);
+ if (ret != -ENOENT)
+ return log_ret(ret);
+ }
+
+ /* get clk */
+ priv->refclk = devm_clk_get(dev, "refclk");
+ if (IS_ERR(priv->refclk)) {
+ log_debug("%s: Could not get refclk: %ld\n",
+ __func__, PTR_ERR(priv->refclk));
+ return PTR_ERR(priv->refclk);
+ }
+
+ /* get gpios */
+ ret = gpio_request_by_name(dev, "reset-gpios", 0,
+ &priv->reset_gpio, GPIOD_IS_OUT);
+ if (ret) {
+ log_debug("%s: Could not decode reset-gpios (%d)\n", __func__, ret);
+ return ret;
+ }
+
+ dm_gpio_set_value(&priv->reset_gpio, 1);
+
+ return 0;
+}
+
+static int tc358768_probe(struct udevice *dev)
+{
+ if (device_get_uclass_id(dev->parent) != UCLASS_I2C)
+ return -EPROTONOSUPPORT;
+
+ return tc358768_setup(dev);
+}
+
+struct panel_ops tc358768_ops = {
+ .enable_backlight = tc358768_attach,
+ .set_backlight = tc358768_set_backlight,
+ .get_display_timing = tc358768_panel_timings,
+};
+
+static const struct udevice_id tc358768_ids[] = {
+ { .compatible = "toshiba,tc358768" },
+ { .compatible = "toshiba,tc358778" },
+ { }
+};
+
+U_BOOT_DRIVER(tc358768) = {
+ .name = "tc358768",
+ .id = UCLASS_PANEL,
+ .of_match = tc358768_ids,
+ .ops = &tc358768_ops,
+ .probe = tc358768_probe,
+ .priv_auto = sizeof(struct tc358768_priv),
+};
--
2.40.1
More information about the U-Boot
mailing list