[PATCH 10/12] stm32mp: activate the command stboard for stm32mp25 boards

[Patrick Delaunay]

Activate the command stboard for stm32mp25 STMicroelectronics boards,
add the default used OTP identifier and the associated board identifier:
- stm32mp25xx-ev1 = MB1936
- stm32mp25xx-dk = MB1605

Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
---

 arch/arm/mach-stm32mp/include/mach/stm32.h | 1 +
 board/st/common/Kconfig                    | 2 +-
 board/st/common/cmd_stboard.c              | 2 ++
 3 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-stm32mp/include/mach/stm32.h b/arch/arm/mach-stm32mp/include/mach/stm32.h
index 45c929aa605d..726c390977e3 100644
--- a/arch/arm/mach-stm32mp/include/mach/stm32.h
+++ b/arch/arm/mach-stm32mp/include/mach/stm32.h
@@ -198,6 +198,7 @@ enum forced_boot_mode {
 #define BSEC_OTP_SERIAL	5
 #define BSEC_OTP_RPN	9
 #define BSEC_OTP_PKG	122
+#define BSEC_OTP_BOARD	246
 #define BSEC_OTP_MAC	247
 #endif
 
diff --git a/board/st/common/Kconfig b/board/st/common/Kconfig
index c1c254d07354..5efac658cf4d 100644
--- a/board/st/common/Kconfig
+++ b/board/st/common/Kconfig
@@ -1,7 +1,7 @@
 config CMD_STBOARD
 	bool "stboard - command for OTP board information"
 	depends on ARCH_STM32MP
-	default y if TARGET_ST_STM32MP15x || TARGET_ST_STM32MP13x
+	default y if TARGET_ST_STM32MP25X || TARGET_ST_STM32MP15X || TARGET_ST_STM32MP13X
 	help
 	  This compile the stboard command to
 	  read and write the board in the OTP.
diff --git a/board/st/common/cmd_stboard.c b/board/st/common/cmd_stboard.c
index 853ab78bbf16..cb103e69b369 100644
--- a/board/st/common/cmd_stboard.c
+++ b/board/st/common/cmd_stboard.c
@@ -49,7 +49,9 @@ static bool check_stboard(u16 board)
 		0x1298,
 		0x1341,
 		0x1497,
+		0x1605, /* stm32mp25xx-dk */
 		0x1635,
+		0x1936, /* stm32mp25xx-ev1 */
 	};
 
 	for (i = 0; i < ARRAY_SIZE(st_board_id); i++)
-- 
2.25.1