[PATCH 09/12] stm32mp: stm32prog: add support of stm32mp25

[Patrice CHOTARD]

On 1/15/24 13:46, Patrick Delaunay wrote:
> Change OTP number to 364 for STM32MP25 as it is done in bsec driver.
> 
> Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
> ---
> 
>  arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h | 10 +++++++++-
>  1 file changed, 9 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h
> index ae4bd8842f53..eda98eb61d76 100644
> --- a/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h
> +++ b/arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h
> @@ -28,7 +28,15 @@
>  #else
>  #define OTP_SIZE_SMC		0
>  #endif
> -#define OTP_SIZE_TA		776
> +/* size of the OTP struct in NVMEM PTA */
> +#define _OTP_SIZE_TA(otp)	(((otp) * 2 + 2) * 4)
> +#if defined(CONFIG_STM32MP13x) || defined(CONFIG_STM32MP15x)

Should we convert are all STM32MP13x and STM32MP15x in upper case ?

> +/* STM32MP1 with BSEC2 */
> +#define OTP_SIZE_TA		_OTP_SIZE_TA(96)
> +#else
> +/* STM32MP2 with BSEC3 */
> +#define OTP_SIZE_TA		_OTP_SIZE_TA(368)
> +#endif
>  #define PMIC_SIZE		8
>  
>  enum stm32prog_target {