[PATCH 1/2] arm: dts: Transpeed 8K618-T: Add Transpeed 8K618-T board support

Andre Przywara andre.przywara at arm.com
Wed Jan 17 22:52:45 CET 2024


On Wed, 17 Jan 2024 11:37:55 -0500
Nick Alilovic <nickalilovic at gmail.com> wrote:

Hi Nick,

> This is the DT I used from the Linux kernel. Made changes to the Makefile to build the new DTB.

thanks, I will copy in this file along with other changes during the
upcoming DT sync, with all the sunxi DT bits queued for Linux v6.8 -
after the merge window closes. Weather permitting ;-) this should be
early next week.

Cheers,
Andre

> Signed-off-by: Nick Alilovic <nickalilovic at gmail.com>
> ---
>  arch/arm/dts/Makefile                         |   1 +
>  .../arm/dts/sun50i-h618-transpeed-8k618-t.dts | 161 ++++++++++++++++++
>  2 files changed, 162 insertions(+)
>  create mode 100644 arch/arm/dts/sun50i-h618-transpeed-8k618-t.dts
> 
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index d456a524b3..cacd21558a 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -836,6 +836,7 @@ dtb-$(CONFIG_MACH_SUN50I_H6) += \
>  dtb-$(CONFIG_MACH_SUN50I_H616) += \
>  	sun50i-h616-orangepi-zero2.dtb \
>  	sun50i-h618-orangepi-zero3.dtb \
> +	sun50i-h618-transpeed-8k618-t.dtb \
>  	sun50i-h616-x96-mate.dtb
>  dtb-$(CONFIG_MACH_SUN50I) += \
>  	sun50i-a64-amarula-relic.dtb \
> diff --git a/arch/arm/dts/sun50i-h618-transpeed-8k618-t.dts b/arch/arm/dts/sun50i-h618-transpeed-8k618-t.dts
> new file mode 100644
> index 0000000000..8ea1fd41ae
> --- /dev/null
> +++ b/arch/arm/dts/sun50i-h618-transpeed-8k618-t.dts
> @@ -0,0 +1,161 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2023 Arm Ltd.
> + */
> +
> +/dts-v1/;
> +
> +#include "sun50i-h616.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> +	model = "Transpeed 8K618-T";
> +	compatible = "transpeed,8k618-t", "allwinner,sun50i-h618";
> +
> +	aliases {
> +		serial0 = &uart0;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	reg_vcc5v: vcc5v {
> +		/* board wide 5V supply directly from the DC input */
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc-5v";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		regulator-always-on;
> +	};
> +
> +	reg_vcc3v3: vcc3v3 {
> +		/* discrete 3.3V regulator */
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc-3v3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-always-on;
> +	};
> +};
> +
> +&ehci0 {
> +	status = "okay";
> +};
> +
> +&ehci1 {
> +	status = "okay";
> +};
> +
> +&ir {
> +	status = "okay";
> +};
> +
> +&mmc0 {
> +	vmmc-supply = <&reg_dldo1>;
> +	cd-gpios = <&pio 8 16 GPIO_ACTIVE_LOW>;	/* PI16 */
> +	bus-width = <4>;
> +	status = "okay";
> +};
> +
> +&mmc2 {
> +	vmmc-supply = <&reg_dldo1>;
> +	vqmmc-supply = <&reg_aldo1>;
> +	bus-width = <8>;
> +	non-removable;
> +	cap-mmc-hw-reset;
> +	mmc-ddr-1_8v;
> +	mmc-hs200-1_8v;
> +	status = "okay";
> +};
> +
> +&ohci0 {
> +	status = "okay";
> +};
> +
> +&ohci1 {
> +	status = "okay";
> +};
> +
> +&r_i2c {
> +	status = "okay";
> +
> +	axp313: pmic at 36 {
> +		compatible = "x-powers,axp313a";
> +		reg = <0x36>;
> +		#interrupt-cells = <1>;
> +		interrupt-controller;
> +
> +		vin1-supply = <&reg_vcc5v>;
> +		vin2-supply = <&reg_vcc5v>;
> +		vin3-supply = <&reg_vcc5v>;
> +
> +		regulators {
> +			reg_aldo1: aldo1 {
> +				regulator-always-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-name = "vcc-1v8-pll";
> +			};
> +
> +			reg_dldo1: dldo1 {
> +				regulator-always-on;
> +				regulator-min-microvolt = <3300000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-name = "vcc-3v3-io-mmc";
> +			};
> +
> +			reg_dcdc1: dcdc1 {
> +				regulator-always-on;
> +				regulator-min-microvolt = <810000>;
> +				regulator-max-microvolt = <990000>;
> +				regulator-name = "vdd-gpu-sys";
> +			};
> +
> +			reg_dcdc2: dcdc2 {
> +				regulator-always-on;
> +				regulator-min-microvolt = <810000>;
> +				regulator-max-microvolt = <1100000>;
> +				regulator-name = "vdd-cpu";
> +			};
> +
> +			reg_dcdc3: dcdc3 {
> +				regulator-always-on;
> +				regulator-min-microvolt = <1360000>;
> +				regulator-max-microvolt = <1360000>;
> +				regulator-name = "vdd-dram";
> +			};
> +		};
> +	};
> +};
> +
> +&pio {
> +	vcc-pc-supply = <&reg_aldo1>;
> +	vcc-pg-supply = <&reg_dldo1>;
> +	vcc-ph-supply = <&reg_dldo1>;
> +	vcc-pi-supply = <&reg_dldo1>;
> +};
> +
> +&uart0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart0_ph_pins>;
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
> +	uart-has-rtscts;
> +	status = "okay";
> +};
> +
> +&usbotg {
> +	dr_mode = "host";	/* USB A type receptable */
> +	status = "okay";
> +};
> +
> +&usbphy {
> +	status = "okay";
> +};



More information about the U-Boot mailing list