[PATCH v1] sunxi: R528: add UART1 support

[Maksim Kiselev]

Add PG6-PG7 pins configuration for the SPL to allow use UART1
on boards with the Allwinner R528/T113 family.

Signed-off-by: Maksim Kiselev <bigunclemax at gmail.com>
---

I tested this patch on LC-PI-T113 board.
This board can be found on eBay or Aliexpress, and looks like
that it is widespread enough to send this patch to the upstream :)


 arch/arm/mach-sunxi/board.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c
index 11a4941822..9dedcd45f5 100644
--- a/arch/arm/mach-sunxi/board.c
+++ b/arch/arm/mach-sunxi/board.c
@@ -159,6 +159,10 @@ static int gpio_init(void)
 	sunxi_gpio_set_cfgpin(SUNXI_GPG(3), SUN5I_GPG_UART1);
 	sunxi_gpio_set_cfgpin(SUNXI_GPG(4), SUN5I_GPG_UART1);
 	sunxi_gpio_set_pull(SUNXI_GPG(4), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN8I_R528)
+	sunxi_gpio_set_cfgpin(SUNXI_GPG(6), 2);
+	sunxi_gpio_set_cfgpin(SUNXI_GPG(7), 2);
+	sunxi_gpio_set_pull(SUNXI_GPG(7), SUNXI_GPIO_PULL_UP);
 #elif CONFIG_CONS_INDEX == 3 && defined(CONFIG_MACH_SUN8I_H3)
 	sunxi_gpio_set_cfgpin(SUNXI_GPA(0), SUN8I_H3_GPA_UART2);
 	sunxi_gpio_set_cfgpin(SUNXI_GPA(1), SUN8I_H3_GPA_UART2);
-- 
2.40.1