[PATCH v4 3/6] rockchip: ringneck-px30/puma-rk3399: factor out storage medium selection
Quentin Schulz
foss+uboot at 0leil.net
Wed Jan 17 18:59:10 CET 2024
From: Quentin Schulz <quentin.schulz at theobroma-systems.com>
Ringneck PX30 and Puma RK3399 both have the same expectation with regard
to bootstd device order and U-Boot environment storage device, except
that Puma RK3399 also supports SPI Flash.
Let's move all of this into a common file where common logic can be put.
Cc: Quentin Schulz <foss+uboot at 0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz at theobroma-systems.com>
---
board/theobroma-systems/common/common.c | 147 +++++++++++++++++++
board/theobroma-systems/common/common.h | 19 +++
board/theobroma-systems/puma_rk3399/MAINTAINERS | 1 +
board/theobroma-systems/puma_rk3399/Makefile | 3 +
board/theobroma-systems/puma_rk3399/puma-rk3399.c | 154 +-------------------
board/theobroma-systems/ringneck_px30/MAINTAINERS | 1 +
board/theobroma-systems/ringneck_px30/Makefile | 3 +
.../ringneck_px30/ringneck-px30.c | 155 +--------------------
8 files changed, 176 insertions(+), 307 deletions(-)
diff --git a/board/theobroma-systems/common/common.c b/board/theobroma-systems/common/common.c
new file mode 100644
index 00000000000..eb21d4c4550
--- /dev/null
+++ b/board/theobroma-systems/common/common.c
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
+ */
+
+#include <dm.h>
+#include <env.h>
+#include <env_internal.h>
+#include <dm/uclass-internal.h>
+
+/*
+ * Swap mmc0 and mmc1 in boot_targets if booted from SD-Card.
+ *
+ * If bootsource is uSD-card we can assume that we want to use the
+ * SD-Card instead of the eMMC as first boot_target for distroboot.
+ * We only want to swap the defaults and not any custom environment a
+ * user has set. We exit early if a changed boot_targets environment
+ * is detected.
+ */
+int setup_boottargets(void)
+{
+ const char *boot_device =
+ ofnode_read_chosen_string("u-boot,spl-boot-device");
+ char *env_default, *env;
+
+ if (!boot_device) {
+ debug("%s: /chosen/u-boot,spl-boot-device not set\n",
+ __func__);
+ return -1;
+ }
+ debug("%s: booted from %s\n", __func__, boot_device);
+
+ env_default = env_get_default("boot_targets");
+ env = env_get("boot_targets");
+ if (!env) {
+ debug("%s: boot_targets does not exist\n", __func__);
+ return -1;
+ }
+ debug("%s: boot_targets current: %s - default: %s\n",
+ __func__, env, env_default);
+
+ if (strcmp(env_default, env) != 0) {
+ debug("%s: boot_targets not default, don't change it\n",
+ __func__);
+ return 0;
+ }
+
+ /*
+ * Make the default boot medium between SD Card and eMMC, the one that
+ * was used to load U-Boot proper. If SPI-NOR flash was used, keep
+ * original default order.
+ */
+ struct udevice *devp;
+
+ if (uclass_find_device_by_ofnode(UCLASS_MMC, ofnode_path(boot_device), &devp)) {
+ debug("%s: not reordering boot_targets, bootdev %s != MMC\n",
+ __func__, boot_device);
+ return 0;
+ }
+
+ char *mmc0, *mmc1;
+
+ mmc0 = strstr(env, "mmc0");
+ mmc1 = strstr(env, "mmc1");
+
+ if (!mmc0 || !mmc1) {
+ debug("%s: only one mmc boot_target found\n", __func__);
+ return -1;
+ }
+
+ /*
+ * If mmc0 comes first in the boot order and U-Boot proper was
+ * loaded from mmc1, swap mmc0 and mmc1 in the list.
+ * If mmc1 comes first in the boot order and U-Boot proper was
+ * loaded from mmc0, swap mmc0 and mmc1 in the list.
+ */
+ if ((mmc0 < mmc1 && devp->seq_ == 1) ||
+ (mmc0 > mmc1 && devp->seq_ == 0)) {
+ mmc0[3] = '1';
+ mmc1[3] = '0';
+ debug("%s: set boot_targets to: %s\n", __func__, env);
+ env_set("boot_targets", env);
+ }
+
+ return 0;
+}
+
+int mmc_get_env_dev(void)
+{
+ const char *boot_device =
+ ofnode_read_chosen_string("u-boot,spl-boot-device");
+ struct udevice *devp;
+
+ if (!boot_device) {
+ debug("%s: /chosen/u-boot,spl-boot-device not set\n",
+ __func__);
+#ifdef CONFIG_SYS_MMC_ENV_DEV
+ return CONFIG_SYS_MMC_ENV_DEV;
+#else
+ return 0;
+#endif
+ }
+
+ debug("%s: booted from %s\n", __func__, boot_device);
+
+ if (uclass_find_device_by_ofnode(UCLASS_MMC, ofnode_path(boot_device), &devp))
+#ifdef CONFIG_SYS_MMC_ENV_DEV
+ return CONFIG_SYS_MMC_ENV_DEV;
+#else
+ return 0;
+#endif
+
+ debug("%s: get MMC ENV from mmc%d\n", __func__, devp->seq_);
+
+ return devp->seq_;
+}
+
+enum env_location arch_env_get_location(enum env_operation op, int prio)
+{
+ const char *boot_device =
+ ofnode_read_chosen_string("u-boot,spl-boot-device");
+ struct udevice *devp;
+
+ if (prio > 0)
+ return ENVL_UNKNOWN;
+
+ if (!boot_device) {
+ debug("%s: /chosen/u-boot,spl-boot-device not set\n",
+ __func__);
+ return ENVL_NOWHERE;
+ }
+
+ debug("%s: booted from %s\n", __func__, boot_device);
+
+ if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH) &&
+ !uclass_find_device_by_ofnode(UCLASS_SPI_FLASH, ofnode_path(boot_device), &devp))
+ return ENVL_SPI_FLASH;
+
+ if (IS_ENABLED(CONFIG_ENV_IS_IN_MMC) &&
+ !uclass_find_device_by_ofnode(UCLASS_MMC, ofnode_path(boot_device), &devp))
+ return ENVL_MMC;
+
+ printf("%s: No environment available: booted from %s but U-Boot config does not allow loading environment from it.",
+ __func__, boot_device);
+
+ return ENVL_NOWHERE;
+}
diff --git a/board/theobroma-systems/common/common.h b/board/theobroma-systems/common/common.h
new file mode 100644
index 00000000000..488313a2d86
--- /dev/null
+++ b/board/theobroma-systems/common/common.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * (C) Copyright 2023 Theobroma Systems Design und Consulting GmbH
+ */
+
+/*
+ * setup_boottargets() - Swap mmc0 and mmc1 in boot_targets depending on U-Boot
+ * proper load medium.
+ *
+ * If bootsource is uSD-card we can assume that we want to use the
+ * SD-Card instead of the eMMC as first boot_target for distroboot.
+ * We only want to swap the defaults and not any custom environment a
+ * user has set. We exit early if a changed boot_targets environment
+ * is detected.
+ *
+ * Return:
+ * 0 if OK, -1 otherwise
+ */
+int setup_boottargets(void);
diff --git a/board/theobroma-systems/puma_rk3399/MAINTAINERS b/board/theobroma-systems/puma_rk3399/MAINTAINERS
index 1ec2dd72d6c..93f570fc4f9 100644
--- a/board/theobroma-systems/puma_rk3399/MAINTAINERS
+++ b/board/theobroma-systems/puma_rk3399/MAINTAINERS
@@ -3,6 +3,7 @@ M: Quentin Schulz <quentin.schulz at theobroma-systems.com>
M: Klaus Goger <klaus.goger at theobroma-systems.com>
S: Maintained
F: board/theobroma-systems/puma_rk3399
+F: board/theobroma-systems/common
F: include/configs/puma_rk3399.h
F: arch/arm/dts/rk3399-puma.dts
F: configs/puma-rk3399_defconfig
diff --git a/board/theobroma-systems/puma_rk3399/Makefile b/board/theobroma-systems/puma_rk3399/Makefile
index d962b56f111..edd61a35c1e 100644
--- a/board/theobroma-systems/puma_rk3399/Makefile
+++ b/board/theobroma-systems/puma_rk3399/Makefile
@@ -5,3 +5,6 @@
#
obj-y += puma-rk3399.o
+ifneq ($(CONFIG_SPL_BUILD),y)
+obj-y += ../common/common.o
+endif
diff --git a/board/theobroma-systems/puma_rk3399/puma-rk3399.c b/board/theobroma-systems/puma_rk3399/puma-rk3399.c
index b8b718da243..a82f97b2d54 100644
--- a/board/theobroma-systems/puma_rk3399/puma-rk3399.c
+++ b/board/theobroma-systems/puma_rk3399/puma-rk3399.c
@@ -3,28 +3,15 @@
* (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
*/
-#include <common.h>
#include <dm.h>
-#include <env.h>
-#include <env_internal.h>
-#include <init.h>
-#include <log.h>
-#include <misc.h>
-#include <spl.h>
#include <syscon.h>
-#include <u-boot/crc.h>
-#include <usb.h>
#include <dm/pinctrl.h>
-#include <dm/uclass-internal.h>
#include <asm/io.h>
-#include <asm/setup.h>
#include <asm/arch-rockchip/clock.h>
#include <asm/arch-rockchip/hardware.h>
#include <asm/arch-rockchip/grf_rk3399.h>
-#include <asm/arch-rockchip/periph.h>
#include <asm/arch-rockchip/misc.h>
-#include <power/regulator.h>
-#include <u-boot/sha256.h>
+#include "../common/common.h"
static void setup_iodomain(void)
{
@@ -40,145 +27,6 @@ static void setup_iodomain(void)
rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_GPIO4CD_SHIFT);
}
-/*
- * Swap mmc0 and mmc1 in boot_targets if booted from SD-Card.
- *
- * If bootsource is uSD-card we can assume that we want to use the
- * SD-Card instead of the eMMC as first boot_target for distroboot.
- * We only want to swap the defaults and not any custom environment a
- * user has set. We exit early if a changed boot_targets environment
- * is detected.
- */
-static int setup_boottargets(void)
-{
- const char *boot_device =
- ofnode_read_chosen_string("u-boot,spl-boot-device");
- char *env_default, *env;
-
- if (!boot_device) {
- debug("%s: /chosen/u-boot,spl-boot-device not set\n",
- __func__);
- return -1;
- }
- debug("%s: booted from %s\n", __func__, boot_device);
-
- env_default = env_get_default("boot_targets");
- env = env_get("boot_targets");
- if (!env) {
- debug("%s: boot_targets does not exist\n", __func__);
- return -1;
- }
- debug("%s: boot_targets current: %s - default: %s\n",
- __func__, env, env_default);
-
- if (strcmp(env_default, env) != 0) {
- debug("%s: boot_targets not default, don't change it\n",
- __func__);
- return 0;
- }
-
- /*
- * Make the default boot medium between SD Card and eMMC, the one that
- * was used to load U-Boot proper. If SPI-NOR flash was used, keep
- * original default order.
- */
- struct udevice *devp;
-
- if (uclass_find_device_by_ofnode(UCLASS_MMC, ofnode_path(boot_device), &devp)) {
- debug("%s: not reordering boot_targets, bootdev %s != MMC\n",
- __func__, boot_device);
- return 0;
- }
-
- char *mmc0, *mmc1;
-
- mmc0 = strstr(env, "mmc0");
- mmc1 = strstr(env, "mmc1");
-
- if (!mmc0 || !mmc1) {
- debug("%s: only one mmc boot_target found\n", __func__);
- return -1;
- }
-
- /*
- * If mmc0 comes first in the boot order and U-Boot proper was
- * loaded from mmc1, swap mmc0 and mmc1 in the list.
- * If mmc1 comes first in the boot order and U-Boot proper was
- * loaded from mmc0, swap mmc0 and mmc1 in the list.
- */
- if ((mmc0 < mmc1 && devp->seq_ == 1) ||
- (mmc0 > mmc1 && devp->seq_ == 0)) {
- mmc0[3] = '1';
- mmc1[3] = '0';
- debug("%s: set boot_targets to: %s\n", __func__, env);
- env_set("boot_targets", env);
- }
-
- return 0;
-}
-
-int mmc_get_env_dev(void)
-{
- const char *boot_device =
- ofnode_read_chosen_string("u-boot,spl-boot-device");
- struct udevice *devp;
-
- if (!boot_device) {
- debug("%s: /chosen/u-boot,spl-boot-device not set\n",
- __func__);
-#ifdef CONFIG_SYS_MMC_ENV_DEV
- return CONFIG_SYS_MMC_ENV_DEV;
-#else
- return 0;
-#endif
- }
-
- debug("%s: booted from %s\n", __func__, boot_device);
-
- if (uclass_find_device_by_ofnode(UCLASS_MMC, ofnode_path(boot_device), &devp))
-#ifdef CONFIG_SYS_MMC_ENV_DEV
- return CONFIG_SYS_MMC_ENV_DEV;
-#else
- return 0;
-#endif
-
- debug("%s: get MMC ENV from mmc%d\n", __func__, devp->seq_);
-
- return devp->seq_;
-}
-
-enum env_location arch_env_get_location(enum env_operation op, int prio)
-{
- const char *boot_device =
- ofnode_read_chosen_string("u-boot,spl-boot-device");
- struct udevice *devp;
-
- if (prio > 0)
- return ENVL_UNKNOWN;
-
- if (!boot_device) {
- debug("%s: /chosen/u-boot,spl-boot-device not set\n",
- __func__);
- return ENVL_NOWHERE;
- }
-
- debug("%s: booted from %s\n", __func__, boot_device);
-
- if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH) &&
- !uclass_find_device_by_ofnode(UCLASS_SPI_FLASH, ofnode_path(boot_device), &devp))
- return ENVL_SPI_FLASH;
-
- if (IS_ENABLED(CONFIG_ENV_IS_IN_MMC) &&
- !uclass_find_device_by_ofnode(UCLASS_MMC, ofnode_path(boot_device), &devp))
- return ENVL_MMC;
-
- printf("%s: No environment available: booted from %s but U-Boot "
- "config does not allow loading environment from it.",
- __func__, boot_device);
-
- return ENVL_NOWHERE;
-}
-
int misc_init_r(void)
{
const u32 cpuid_offset = 0x7;
diff --git a/board/theobroma-systems/ringneck_px30/MAINTAINERS b/board/theobroma-systems/ringneck_px30/MAINTAINERS
index d764e26066c..06e1beaab14 100644
--- a/board/theobroma-systems/ringneck_px30/MAINTAINERS
+++ b/board/theobroma-systems/ringneck_px30/MAINTAINERS
@@ -3,6 +3,7 @@ M: Quentin Schulz <quentin.schulz at theobroma-systems.com>
M: Klaus Goger <klaus.goger at theobroma-systems.com>
S: Maintained
F: board/theobroma-systems/ringneck_px30
+F: board/theobroma-systems/common
F: include/configs/ringneck_px30.h
F: arch/arm/dts/px30-ringneck*
F: configs/ringneck-px30_defconfig
diff --git a/board/theobroma-systems/ringneck_px30/Makefile b/board/theobroma-systems/ringneck_px30/Makefile
index 31ada1a6942..45cc65baf9a 100644
--- a/board/theobroma-systems/ringneck_px30/Makefile
+++ b/board/theobroma-systems/ringneck_px30/Makefile
@@ -5,3 +5,6 @@
#
obj-y += ringneck-px30.o
+ifneq ($(CONFIG_SPL_BUILD),y)
+obj-y += ../common/common.o
+endif
diff --git a/board/theobroma-systems/ringneck_px30/ringneck-px30.c b/board/theobroma-systems/ringneck_px30/ringneck-px30.c
index 5d2c76ab902..ff7e414303d 100644
--- a/board/theobroma-systems/ringneck_px30/ringneck-px30.c
+++ b/board/theobroma-systems/ringneck_px30/ringneck-px30.c
@@ -3,163 +3,10 @@
* (C) Copyright 2022 Theobroma Systems Design und Consulting GmbH
*/
-#include <common.h>
-#include <dm.h>
-#include <env.h>
-#include <env_internal.h>
-#include <init.h>
-#include <log.h>
-#include <misc.h>
-#include <spl.h>
-#include <syscon.h>
-#include <u-boot/crc.h>
-#include <usb.h>
-#include <dm/pinctrl.h>
-#include <dm/uclass-internal.h>
#include <asm/gpio.h>
-#include <asm/io.h>
-#include <asm/setup.h>
-#include <asm/arch-rockchip/clock.h>
-#include <asm/arch-rockchip/hardware.h>
-#include <asm/arch-rockchip/periph.h>
#include <asm/arch-rockchip/misc.h>
#include <linux/delay.h>
-#include <power/regulator.h>
-#include <u-boot/sha256.h>
-
-/*
- * Swap mmc0 and mmc1 in boot_targets if booted from SD-Card.
- *
- * If bootsource is uSD-card we can assume that we want to use the
- * SD-Card instead of the eMMC as first boot_target for distroboot.
- * We only want to swap the defaults and not any custom environment a
- * user has set. We exit early if a changed boot_targets environment
- * is detected.
- */
-static int setup_boottargets(void)
-{
- const char *boot_device =
- ofnode_read_chosen_string("u-boot,spl-boot-device");
- char *env_default, *env;
-
- if (!boot_device) {
- debug("%s: /chosen/u-boot,spl-boot-device not set\n",
- __func__);
- return -1;
- }
- debug("%s: booted from %s\n", __func__, boot_device);
-
- env_default = env_get_default("boot_targets");
- env = env_get("boot_targets");
- if (!env) {
- debug("%s: boot_targets does not exist\n", __func__);
- return -1;
- }
- debug("%s: boot_targets current: %s - default: %s\n",
- __func__, env, env_default);
-
- if (strcmp(env_default, env) != 0) {
- debug("%s: boot_targets not default, don't change it\n",
- __func__);
- return 0;
- }
-
- /*
- * Make the default boot medium between SD Card and eMMC, the one that
- * was used to load U-Boot proper.
- */
- struct udevice *devp;
-
- if (uclass_find_device_by_ofnode(UCLASS_MMC, ofnode_path(boot_device), &devp)) {
- debug("%s: not reordering boot_targets, bootdev %s != MMC\n",
- __func__, boot_device);
- return 0;
- }
-
- char *mmc0, *mmc1;
-
- mmc0 = strstr(env, "mmc0");
- mmc1 = strstr(env, "mmc1");
-
- if (!mmc0 || !mmc1) {
- debug("%s: only one mmc boot_target found\n", __func__);
- return -1;
- }
-
- /*
- * If mmc0 comes first in the boot order and U-Boot proper was
- * loaded from mmc1, swap mmc0 and mmc1 in the list.
- * If mmc1 comes first in the boot order and U-Boot proper was
- * loaded from mmc0, swap mmc0 and mmc1 in the list.
- */
- if ((mmc0 < mmc1 && devp->seq_ == 1) ||
- (mmc0 > mmc1 && devp->seq_ == 0)) {
- mmc0[3] = '1';
- mmc1[3] = '0';
- debug("%s: set boot_targets to: %s\n", __func__, env);
- env_set("boot_targets", env);
- }
-
- return 0;
-}
-
-int mmc_get_env_dev(void)
-{
- const char *boot_device =
- ofnode_read_chosen_string("u-boot,spl-boot-device");
- struct udevice *devp;
-
- if (!boot_device) {
- debug("%s: /chosen/u-boot,spl-boot-device not set\n",
- __func__);
-#ifdef CONFIG_SYS_MMC_ENV_DEV
- return CONFIG_SYS_MMC_ENV_DEV;
-#else
- return 0;
-#endif
- }
-
- debug("%s: booted from %s\n", __func__, boot_device);
-
- if (uclass_find_device_by_ofnode(UCLASS_MMC, ofnode_path(boot_device), &devp))
-#ifdef CONFIG_SYS_MMC_ENV_DEV
- return CONFIG_SYS_MMC_ENV_DEV;
-#else
- return 0;
-#endif
-
- debug("%s: get MMC ENV from mmc%d\n", __func__, devp->seq_);
-
- return devp->seq_;
-}
-
-enum env_location arch_env_get_location(enum env_operation op, int prio)
-{
- const char *boot_device =
- ofnode_read_chosen_string("u-boot,spl-boot-device");
- struct udevice *devp;
-
- if (prio > 0)
- return ENVL_UNKNOWN;
-
- if (!boot_device) {
- debug("%s: /chosen/u-boot,spl-boot-device not set\n",
- __func__);
- return ENVL_NOWHERE;
- }
-
- debug("%s: booted from %s\n", __func__, boot_device);
-
- if (IS_ENABLED(CONFIG_ENV_IS_IN_MMC) &&
- !uclass_find_device_by_ofnode(UCLASS_MMC, ofnode_path(boot_device), &devp))
- return ENVL_MMC;
-
- printf("%s: No environment available: booted from %s but U-Boot "
- "config does not allow loading environment from it.",
- __func__, boot_device);
-
- return ENVL_NOWHERE;
-}
+#include "../common/common.h"
int misc_init_r(void)
{
--
2.43.0
More information about the U-Boot
mailing list