[PATCH 13/13] qcom_defconfig: enable USB

[Caleb Connolly]

Enable support for the DWC3 USB controller and required dependencies for
Qualcomm boards, specifically the DB845c:
* IOMMU / SMMU
* USB high-speed PHYs
* Mass storage and ACM gadgets

Signed-off-by: Caleb Connolly <caleb.connolly at linaro.org>
---
 configs/qcom_defconfig | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/configs/qcom_defconfig b/configs/qcom_defconfig
index 3935fe2ef59f..dedd5f20b719 100644
--- a/configs/qcom_defconfig
+++ b/configs/qcom_defconfig
@@ -13,6 +13,7 @@ CONFIG_BOOTSTD_FULL=y
 CONFIG_BOOTDELAY=1
 CONFIG_USE_PREBOOT=y
 CONFIG_SYS_CBSIZE=512
+# CONFIG_SYS_DEVICE_NULLDEV is not set
 CONFIG_LOG_MAX_LEVEL=9
 CONFIG_LOG_DEFAULT_LEVEL=4
 # CONFIG_DISPLAY_CPUINFO is not set
@@ -26,6 +27,8 @@ CONFIG_CMD_MMC=y
 CONFIG_CMD_PART=y
 CONFIG_CMD_UFS=y
 CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_UMS_ABORT_KEYED=y
 CONFIG_CMD_CAT=y
 CONFIG_CMD_BMP=y
 CONFIG_CMD_FAT=y
@@ -35,6 +38,7 @@ CONFIG_EFI_PARTITION=y
 CONFIG_OF_LIVE=y
 # CONFIG_NET is not set
 # CONFIG_OFNODE_MULTI_TREE is not set
+CONFIG_DM_WARN=y
 CONFIG_BUTTON_QCOM_PMIC=y
 CONFIG_CLK=y
 CONFIG_CLK_QCOM_QCS404=y
@@ -43,14 +47,21 @@ CONFIG_MSM_GPIO=y
 CONFIG_QCOM_PMIC_GPIO=y
 CONFIG_DM_KEYBOARD=y
 CONFIG_BUTTON_KEYBOARD=y
+CONFIG_IOMMU=y
+CONFIG_QCOM_HYP_SMMU=y
+CONFIG_MISC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_MSM=y
 CONFIG_PHY=y
+CONFIG_PHY_QCOM_QUSB2=y
+CONFIG_PHY_QCOM_USB_HS_7NM=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_QCOM_QCS404=y
 CONFIG_PINCTRL_QCOM_SDM845=y
 CONFIG_DM_PMIC=y
 CONFIG_PMIC_QCOM=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_SCSI=y
 CONFIG_MSM_SERIAL=y
 CONFIG_MSM_GENI_SERIAL=y
@@ -61,7 +72,11 @@ CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
 CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_USB_FUNCTION_ACM=y
 CONFIG_UFS=y
 CONFIG_VIDEO=y
 # CONFIG_VIDEO_FONT_8X16 is not set

-- 
2.43.0