[PATCH v5] arch: arm: mach-rockchip: Kconfig: Enable BOOTSTD_FULL for RK3399 and RK3588

[Shantur Rathore]

Rockchip RK3399 and RK3588 SoCs can support wide range of bootflows.
Without full bootflow commands, it can be difficult to
figure out issues if any, hence enable by default.

Reviewed-by: Simon Glass <sjg at chromium.org>

Signed-off-by: Shantur Rathore <i at shantur.com>
---

Changes in v5:
- Only enable it for RK3399 and RK3588 as suggested by Kever

Changes in v4:
- Replace BOOTSTD_DEFAULT with BOOTSTD_FULL as previous version
didn't apply on next

 arch/arm/mach-rockchip/Kconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index 6ff0aa6911..5a46c986ef 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -265,6 +265,7 @@ config ROCKCHIP_RK3399
 	imply TPL_TINY_MEMSET
 	imply TPL_ROCKCHIP_COMMON_BOARD
 	imply SYS_BOOTCOUNT_SINGLEWORD if BOOTCOUNT_LIMIT
+	imply BOOTSTD_FULL
 	imply CMD_BOOTCOUNT if BOOTCOUNT_LIMIT
 	help
 	  The Rockchip RK3399 is a ARM-based SoC with a dual-core Cortex-A72
@@ -319,6 +320,7 @@ config ROCKCHIP_RK3588
 	imply MISC_INIT_R
 	imply CLK_SCMI
 	imply SCMI_FIRMWARE
+	imply BOOTSTD_FULL
 	help
 	  The Rockchip RK3588 is a ARM-based SoC with quad-core Cortex-A76 and
 	  quad-core Cortex-A55 including NEON and GPU, 6TOPS NPU, Mali-G610 MP4,
-- 
2.40.1