[PATCH V2 09/10] board: beagle: beagleplay: Set fdtfile from C code instead of findfdt script

[Nishanth Menon]

Stop using the findfdt script and switch to setting the fdtfile from C
code.

Signed-off-by: Nishanth Menon <nm at ti.com>
---
Changes from V1:
* Just macro name change s/TI_EVM_FDT_FOLDER_PATH/TI_FDT_FOLDER_PATH
* Commit message update to drop the "warning added to findfdt" since
  that is not done.

I have retained the explicit setting of fdtfile to remove dependency on
TI evm specific logic. Also, the dynamic population of fdtfile instead
of env_set("fdtfile", "ti/k3-am625-beagleplay.dtb") to allow for the
upcoming board variants to be able to  configure the dtb name via a
config fragment.

V1: https://lore.kernel.org/r/20240108173301.2692332-10-nm@ti.com
 board/beagle/beagleplay/beagleplay.c   | 14 ++++++++++++++
 board/beagle/beagleplay/beagleplay.env |  1 -
 configs/am62x_beagleplay_a53_defconfig |  3 ++-
 3 files changed, 16 insertions(+), 2 deletions(-)

diff --git a/board/beagle/beagleplay/beagleplay.c b/board/beagle/beagleplay/beagleplay.c
index 1c376dea372f..20819ecf45b4 100644
--- a/board/beagle/beagleplay/beagleplay.c
+++ b/board/beagle/beagleplay/beagleplay.c
@@ -27,3 +27,17 @@ int dram_init_banksize(void)
 {
 	return fdtdec_setup_memory_banksize();
 }
+
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+	char fdtfile[50];
+
+	snprintf(fdtfile, sizeof(fdtfile), "%s/%s.dtb",
+		 CONFIG_TI_FDT_FOLDER_PATH, CONFIG_DEFAULT_DEVICE_TREE);
+
+	env_set("fdtfile", fdtfile);
+
+	return 0;
+}
+#endif
diff --git a/board/beagle/beagleplay/beagleplay.env b/board/beagle/beagleplay/beagleplay.env
index 4f0a94a8113e..647b25d14c8e 100644
--- a/board/beagle/beagleplay/beagleplay.env
+++ b/board/beagle/beagleplay/beagleplay.env
@@ -1,5 +1,4 @@
 #include <env/ti/ti_common.env>
-#include <env/ti/default_findfdt.env>
 #include <env/ti/mmc.env>
 
 name_kern=Image
diff --git a/configs/am62x_beagleplay_a53_defconfig b/configs/am62x_beagleplay_a53_defconfig
index 0be20045a974..1f43891d10bb 100644
--- a/configs/am62x_beagleplay_a53_defconfig
+++ b/configs/am62x_beagleplay_a53_defconfig
@@ -33,7 +33,8 @@ CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"
 CONFIG_AUTOBOOT_DELAY_STR="d"
 CONFIG_AUTOBOOT_STOP_STR=" "
-CONFIG_BOOTCOMMAND="run set_led_state_start_load;run findfdt; run envboot; bootflow scan -lb;run set_led_state_fail_load"
+CONFIG_BOOTCOMMAND="run set_led_state_start_load; run envboot; bootflow scan -lb;run set_led_state_fail_load"
+CONFIG_BOARD_LATE_INIT=y
 CONFIG_SPL_MAX_SIZE=0x58000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x80c80000
-- 
2.43.0