[PATCH v2 2/2] board: solidrun: clearfog: fix serdes 1 / eth2 speed for clearfog gtr

[Josua Mayer]

Clearfog GTR connects eth2 / serdes 1 to a 2.5Gbps capable ethernet
switch port. Linux already configures a fixed-link at speed 2500 from
device-tree.

Upgrade serdes 1 rate to 3.125Gbps to support a 2.5Gbps link.

Additionally add comments documenting each serdes' function of clearfog
gtr, which are shared with clearfog pro.

Signed-off-by: Josua Mayer <josua at solid-run.com>
---
 board/solidrun/clearfog/clearfog.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/board/solidrun/clearfog/clearfog.c b/board/solidrun/clearfog/clearfog.c
index 51c5be518a..6977db0a9e 100644
--- a/board/solidrun/clearfog/clearfog.c
+++ b/board/solidrun/clearfog/clearfog.c
@@ -98,6 +98,14 @@ int hws_board_topology_load(struct serdes_map **serdes_map_array, u8 *count)
 			board_serdes_map[0].serdes_speed = SERDES_SPEED_5_GBPS;
 			board_serdes_map[0].serdes_mode = PEX_ROOT_COMPLEX_X1;
 		}
+		/* serdes 1 is 2.5Gbps fixed link to ethernet switch */
+		board_serdes_map[1].serdes_type = SGMII1;
+		board_serdes_map[1].serdes_speed = SERDES_SPEED_3_125_GBPS;
+		board_serdes_map[1].serdes_mode = SERDES_DEFAULT_MODE;
+		/* serdes 2 is pci (like clearfog pro) */
+		/* serdes 3 is usb-3 (like clearfog pro) */
+		/* serdes 4 is pci (like clearfog pro) */
+		/* serdes 5 is sfp connector (like clearfog pro) */
 	} else if (sr_product_is(&cf_tlv_data, "Clearfog Pro")) {
 		/* handle recognized product as noop, no adjustment required */
 	} else if (sr_product_is(&cf_tlv_data, "Clearfog Base")) {

-- 
2.35.3