[PATCH v2 4/4] phycore-imx8mp: add support for booting and flashing emmc via UUU

[Benjamin Hahn]

add support for Serial Downloader Boot via UUU as well as flashing emmc
via UUU on USB0 Port of phyBOARD Pollux.

Reviewed-by: Fabio Estevam <festevam at gmail.com>
Signed-off-by: Benjamin Hahn <B.Hahn at phytec.de>
---
 board/phytec/phycore_imx8mp/phycore-imx8mp.c |  4 ++++
 configs/phycore-imx8mp_defconfig             | 18 ++++++++++++++++--
 include/configs/phycore_imx8mp.h             |  5 +++++
 3 files changed, 25 insertions(+), 2 deletions(-)

diff --git a/board/phytec/phycore_imx8mp/phycore-imx8mp.c b/board/phytec/phycore_imx8mp/phycore-imx8mp.c
index a8f0821437..dbdd6bb793 100644
--- a/board/phytec/phycore_imx8mp/phycore-imx8mp.c
+++ b/board/phytec/phycore_imx8mp/phycore-imx8mp.c
@@ -46,6 +46,10 @@ int board_late_init(void)
 	case MMC3_BOOT:
 		env_set_ulong("mmcdev", 2);
 		break;
+	case USB_BOOT:
+		printf("Detect USB boot. Will enter fastboot mode!\n");
+		env_set_ulong("dofastboot", 1);
+		break;
 	default:
 		break;
 	}
diff --git a/configs/phycore-imx8mp_defconfig b/configs/phycore-imx8mp_defconfig
index e3fe4ed94e..0f37286d5d 100644
--- a/configs/phycore-imx8mp_defconfig
+++ b/configs/phycore-imx8mp_defconfig
@@ -27,7 +27,7 @@ CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_USE_BOOTCOMMAND=y
-CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadimage; then run mmcboot; else run netboot; fi; fi;"
+CONFIG_BOOTCOMMAND="if test ${dofastboot} = 1; then fastboot 0; fi; mmc dev ${mmcdev}; if mmc rescan; then if run loadimage; then run mmcboot; else run netboot; fi; fi;"
 CONFIG_DEFAULT_FDT_FILE="oftree"
 CONFIG_SYS_CBSIZE=2048
 CONFIG_SYS_PBSIZE=2074
@@ -66,6 +66,7 @@ CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
+CONFIG_CMD_USB_SDP=y
 CONFIG_CMD_USB_MASS_STORAGE=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
@@ -87,6 +88,17 @@ CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_SPL_DM=y
 CONFIG_CLK_COMPOSITE_CCF=y
 CONFIG_CLK_IMX8MP=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x42800000
+CONFIG_FASTBOOT_BUF_SIZE=0x13000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_UUU_SUPPORT=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=2
+CONFIG_FASTBOOT_MMC_BOOT_SUPPORT=y
+CONFIG_FASTBOOT_MMC_BOOT1_NAME="mmc2boot0"
+CONFIG_FASTBOOT_MMC_BOOT2_NAME="mmc2boot1"
+CONFIG_FASTBOOT_MMC_USER_SUPPORT=y
+CONFIG_FASTBOOT_MMC_USER_NAME="mmc2"
 CONFIG_MXC_GPIO=y
 CONFIG_DM_I2C=y
 # CONFIG_SPL_DM_I2C is not set
@@ -111,6 +123,9 @@ CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
 CONFIG_PINCTRL_IMX8M=y
 CONFIG_SPL_POWER_LEGACY=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_IMX8M_POWER_DOMAIN=y
+CONFIG_IMX8MP_HSIOMIX_BLKCTRL=y
 CONFIG_POWER_PCA9450=y
 CONFIG_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_FIXED=y
@@ -136,5 +151,4 @@ CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="FSL"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0525
 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
-CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_IMX_WATCHDOG=y
diff --git a/include/configs/phycore_imx8mp.h b/include/configs/phycore_imx8mp.h
index d79d364c8e..11a17be7fe 100644
--- a/include/configs/phycore_imx8mp.h
+++ b/include/configs/phycore_imx8mp.h
@@ -19,6 +19,11 @@
 	"fdt_addr=0x48000000\0" \
 	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
 	"ip_dyn=yes\0" \
+	"dofastboot=0\0" \
+	"fastboot_raw_partition_bootloader=64 8128\0" \
+	"fastboot_raw_partition_all=0 4194304\0" \
+	"emmc_dev=2\0" \
+	"sd_dev=1\0" \
 	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 	"mmcpart=1\0" \
 	"mmcroot=2\0" \

-- 
2.34.1