[PATCH v5 4/7] siemens: board: etamin: remove deprecated nand config
Enrico Leto
enrico.leto at siemens.com
Mon Jan 22 11:52:34 CET 2024
NAND was used in the early development phase of etamin. The board runs now
on MMC. This setting is no more used -> remove to simplify the board file.
Further clean-up of etamin should remove all NAND settings. Complete clean-
up of etamin board will take place in a separate patch serie.
Signed-off-by: Enrico Leto <enrico.leto at siemens.com>
---
board/siemens/common/board.c | 4 ----
board/siemens/draco/Kconfig | 2 --
board/siemens/draco/board.c | 26 --------------------------
3 files changed, 32 deletions(-)
diff --git a/board/siemens/common/board.c b/board/siemens/common/board.c
index 80737838a23..9551a29f03d 100644
--- a/board/siemens/common/board.c
+++ b/board/siemens/common/board.c
@@ -135,10 +135,6 @@ int board_init(void)
gpmc_init();
-#if CONFIG_IS_ENABLED(NAND_CS_INIT)
- board_nand_cs_init();
-#endif
-
return 0;
}
#endif /* #ifndef CONFIG_SPL_BUILD */
diff --git a/board/siemens/draco/Kconfig b/board/siemens/draco/Kconfig
index 0cdf5bc9812..9d45c4239be 100644
--- a/board/siemens/draco/Kconfig
+++ b/board/siemens/draco/Kconfig
@@ -44,6 +44,4 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "draco-etamin"
-config NAND_CS_INIT
- def_bool y
endif
diff --git a/board/siemens/draco/board.c b/board/siemens/draco/board.c
index a0a7d51db32..8c5783d0fb4 100644
--- a/board/siemens/draco/board.c
+++ b/board/siemens/draco/board.c
@@ -358,30 +358,4 @@ U_BOOT_CMD(
#endif /* #if defined(CONFIG_DRIVER_TI_CPSW) */
#endif /* #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) */
-#if CONFIG_IS_ENABLED(NAND_CS_INIT)
-#define ETAMIN_NAND_GPMC_CONFIG1 0x00000800
-#define ETAMIN_NAND_GPMC_CONFIG2 0x001e1e00
-#define ETAMIN_NAND_GPMC_CONFIG3 0x001e1e00
-#define ETAMIN_NAND_GPMC_CONFIG4 0x16051807
-#define ETAMIN_NAND_GPMC_CONFIG5 0x00151e1e
-#define ETAMIN_NAND_GPMC_CONFIG6 0x16000f80
-
-/* GPMC definitions for second nand cs1 */
-static const u32 gpmc_nand_config[] = {
- ETAMIN_NAND_GPMC_CONFIG1,
- ETAMIN_NAND_GPMC_CONFIG2,
- ETAMIN_NAND_GPMC_CONFIG3,
- ETAMIN_NAND_GPMC_CONFIG4,
- ETAMIN_NAND_GPMC_CONFIG5,
- ETAMIN_NAND_GPMC_CONFIG6,
- /*CONFIG7- computed as params */
-};
-
-static void board_nand_cs_init(void)
-{
- enable_gpmc_cs_config(gpmc_nand_config, &gpmc_cfg->cs[1],
- 0x18000000, GPMC_SIZE_16M);
-}
-#endif
-
#include "../common/board.c"
--
2.30.2
More information about the U-Boot
mailing list