[PATCH v5 5/7] siemens: board: clean up draco products vs common
Enrico Leto
enrico.leto at siemens.com
Mon Jan 22 11:52:35 CET 2024
The common folder was initialially created for the common parts of the
products based on draco-am355x board family. These are the product
lines 'pxm2', 'rut' and the base line named 'draco'!
Adding the new capricorn-imx8 board family, common was enhanced without
cleanup.
Move all am355x specifics to a new file 'board_am335x'.
Reviewed-by: Alexander Sverdlin <alexander.sverdlin at siemens.com>
Signed-off-by: Enrico Leto <enrico.leto at siemens.com>
---
board/siemens/common/board.c | 52 +++-----------------------
board/siemens/common/board_am335x.c | 58 +++++++++++++++++++++++++++++
board/siemens/common/board_am335x.h | 38 +++++++++++++++++++
board/siemens/draco/Makefile | 2 +
board/siemens/draco/board.c | 10 ++---
board/siemens/draco/board.h | 32 +++-------------
board/siemens/draco/mux.c | 2 +-
board/siemens/pxm2/MAINTAINERS | 2 +-
board/siemens/pxm2/Makefile | 2 +
board/siemens/pxm2/board.c | 10 ++---
board/siemens/pxm2/board.h | 21 -----------
board/siemens/pxm2/mux.c | 2 +-
board/siemens/rut/MAINTAINERS | 2 +-
board/siemens/rut/Makefile | 2 +
board/siemens/rut/board.c | 10 ++---
board/siemens/rut/board.h | 21 -----------
board/siemens/rut/mux.c | 1 +
17 files changed, 129 insertions(+), 138 deletions(-)
create mode 100644 board/siemens/common/board_am335x.c
create mode 100644 board/siemens/common/board_am335x.h
delete mode 100644 board/siemens/pxm2/board.h
delete mode 100644 board/siemens/rut/board.h
diff --git a/board/siemens/common/board.c b/board/siemens/common/board.c
index 9551a29f03d..bed3d3c3667 100644
--- a/board/siemens/common/board.c
+++ b/board/siemens/common/board.c
@@ -1,12 +1,11 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * Common board functions for siemens AM335X based boards
+ * Common board functions for siemens based boards
+ *
+ * TI am335x specifics moved to board_am335x.c
+ *
* (C) Copyright 2013 Siemens Schweiz AG
* (C) Heiko Schocher, DENX Software Engineering, hs at denx.de.
- *
- * Based on:
- * U-Boot file:/board/ti/am335x/board.c
- * Copyright (C) 2011, Texas Instruments, Incorporated - https://www.ti.com/
*/
#include <common.h>
@@ -81,38 +80,6 @@ int siemens_ee_read_data(uint address, uchar *buffer, int len)
#endif
}
-#ifdef CONFIG_SPL_BUILD
-void set_uart_mux_conf(void)
-{
- enable_uart0_pin_mux();
-}
-
-void set_mux_conf_regs(void)
-{
- /* Initalize the board header */
- enable_i2c0_pin_mux();
-
- /* enable early the console */
- gd->baudrate = CONFIG_BAUDRATE;
- serial_init();
- gd->have_console = 1;
-
- siemens_ee_setup();
- if (read_eeprom() < 0)
- puts("Could not get board ID.\n");
-
- enable_board_pin_mux();
-}
-
-void sdram_init(void)
-{
- spl_siemens_board_init();
- board_init_ddr();
-
- return;
-}
-#endif /* #ifdef CONFIG_SPL_BUILD */
-
#ifndef CONFIG_SPL_BUILD
/*
* Basic board specific setup. Pinmux has been handled already.
@@ -139,15 +106,6 @@ int board_init(void)
}
#endif /* #ifndef CONFIG_SPL_BUILD */
-#define OSC (V_OSCK/1000000)
-const struct dpll_params dpll_ddr = {
- DDR_PLL_FREQ, OSC-1, 1, -1, -1, -1, -1};
-
-const struct dpll_params *get_dpll_ddr_params(void)
-{
- return &dpll_ddr;
-}
-
#ifndef CONFIG_SPL_BUILD
#define MAX_NR_LEDS 10
@@ -226,7 +184,7 @@ U_BOOT_CMD(
* defines the startup state of the led, S1 the special state of the led when
* it enters e.g. dfu mode.
*/
-void set_env_gpios(unsigned char state)
+static void set_env_gpios(unsigned char state)
{
char *ptr_env;
char str_tmp[5]; /* must contain "ledX"*/
diff --git a/board/siemens/common/board_am335x.c b/board/siemens/common/board_am335x.c
new file mode 100644
index 00000000000..301857d6f90
--- /dev/null
+++ b/board/siemens/common/board_am335x.c
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Common board functions for siemens AM335X based boards
+ * (C) Copyright Siemens AG 2013
+ * (C) Heiko Schocher, DENX Software Engineering, hs at denx.de.
+ *
+ * Based on:
+ * U-Boot file:/board/ti/am335x/board.c
+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ */
+
+#include <init.h>
+#include <serial.h>
+#include <asm/arch/clock.h>
+#include "board_am335x.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_SPL_BUILD
+void set_uart_mux_conf(void)
+{
+ enable_uart0_pin_mux();
+}
+
+void set_mux_conf_regs(void)
+{
+ /* Initalize the board header */
+ enable_i2c0_pin_mux();
+
+ /* enable early the console */
+ gd->baudrate = CONFIG_BAUDRATE;
+ serial_init();
+ gd->have_console = 1;
+
+ siemens_ee_setup();
+ if (siemens_read_eeprom() < 0)
+ puts("Could not get board ID.\n");
+
+ enable_board_pin_mux();
+}
+
+void sdram_init(void)
+{
+ spl_siemens_board_init();
+ siemens_init_ddr();
+
+ return;
+}
+#endif /* #ifdef CONFIG_SPL_BUILD */
+
+#define OSC (V_OSCK / 1000000)
+const struct dpll_params dpll_ddr = {
+ DDR_PLL_FREQ, OSC - 1, 1, -1, -1, -1, -1};
+
+const struct dpll_params *get_dpll_ddr_params(void)
+{
+ return &dpll_ddr;
+}
diff --git a/board/siemens/common/board_am335x.h b/board/siemens/common/board_am335x.h
new file mode 100644
index 00000000000..ce5bec4f9cb
--- /dev/null
+++ b/board/siemens/common/board_am335x.h
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Common board definitions for am335x based boards
+ *
+ * Copyright Siemens AG 2023
+ *
+ * Based on:
+ * TI AM335x boards information header
+ * u-boot:/board/ti/am335x/board.h
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ */
+
+#ifndef _BOARD_AM335X_H_
+#define _BOARD_AM335X_H_
+
+#include "board.h"
+
+/* Common functions with product specific implementation */
+void spl_siemens_board_init(void);
+void siemens_init_ddr(void);
+int siemens_read_eeprom(void);
+
+#ifdef CONFIG_SPL_BUILD
+/* Mux for init: uart?, i2c0 to read the main EEPROM */
+void enable_uart0_pin_mux(void);
+void enable_uart1_pin_mux(void);
+void enable_uart2_pin_mux(void);
+void enable_uart3_pin_mux(void);
+void enable_uart4_pin_mux(void);
+void enable_uart5_pin_mux(void);
+void enable_i2c0_pin_mux(void);
+
+/* Main mux function to enable other pinmux required on the board */
+void enable_board_pin_mux(void);
+#endif /* CONFIG_SPL_BUILD */
+
+#endif /* _BOARD_AM335X_H_ */
diff --git a/board/siemens/draco/Makefile b/board/siemens/draco/Makefile
index e94456ab1c3..9091a94d375 100644
--- a/board/siemens/draco/Makefile
+++ b/board/siemens/draco/Makefile
@@ -14,6 +14,8 @@ obj-y := mux.o
endif
obj-y += board.o
+obj-y += ../common/board.o
+obj-y += ../common/board_am335x.o
ifndef CONFIG_SPL_BUILD
obj-y += ../common/factoryset.o
endif
diff --git a/board/siemens/draco/board.c b/board/siemens/draco/board.c
index 8c5783d0fb4..1b3b1ce0dd1 100644
--- a/board/siemens/draco/board.c
+++ b/board/siemens/draco/board.c
@@ -37,7 +37,7 @@
#include <watchdog.h>
#include <linux/delay.h>
#include "board.h"
-#include "../common/board.h"
+#include "../common/board_am335x.h"
#include "../common/factoryset.h"
#include <nand.h>
@@ -159,7 +159,7 @@ static int draco_read_nand_geometry(void)
/*
* Read header information from EEPROM into global structure.
*/
-static int read_eeprom(void)
+int siemens_read_eeprom(void)
{
/* Read Siemens eeprom data (DDR3) */
if (siemens_ee_read_data(SIEMENS_EE_ADDR_DDR3, (uchar *)&settings.ddr3,
@@ -195,7 +195,7 @@ static int read_eeprom(void)
return draco_read_nand_geometry();
}
-static void board_init_ddr(void)
+void siemens_init_ddr(void)
{
struct emif_regs draco_ddr3_emif_reg_data = {
.zq_config = 0x50074BE4,
@@ -242,7 +242,7 @@ struct ctrl_ioregs draco_ddr3_ioregs = {
&draco_ddr3_cmd_ctrl_data, &draco_ddr3_emif_reg_data, 0);
}
-static void spl_siemens_board_init(void)
+void spl_siemens_board_init(void)
{
return;
}
@@ -357,5 +357,3 @@ U_BOOT_CMD(
);
#endif /* #if defined(CONFIG_DRIVER_TI_CPSW) */
#endif /* #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) */
-
-#include "../common/board.c"
diff --git a/board/siemens/draco/board.h b/board/siemens/draco/board.h
index f027427d1fb..b3a765d2eda 100644
--- a/board/siemens/draco/board.h
+++ b/board/siemens/draco/board.h
@@ -1,19 +1,14 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
- * board.h
- *
+ * Board definitions for draco products
* (C) Copyright 2013 Siemens Schweiz AG
* (C) Heiko Schocher, DENX Software Engineering, hs at denx.de.
*
- * Based on:
- * TI AM335x boards information header
- * u-boot:/board/ti/am335x/board.h
- *
- * Copyright (C) 2011, Texas Instruments, Incorporated - https://www.ti.com/
+ * TI am335x specifics moved to ../common/board_am335x.h
*/
-#ifndef _BOARD_H_
-#define _BOARD_H_
+#ifndef _BOARD_DRACO_H_
+#define _BOARD_DRACO_H_
#define PARGS(x) #x , /* Parameter Name */ \
settings.ddr3.x, /* EEPROM Value */ \
@@ -58,21 +53,4 @@ struct draco_baseboard_id {
struct chip_data chip;
};
-/*
- * We have three pin mux functions that must exist. We must be able to enable
- * uart0, for initial output and i2c0 to read the main EEPROM. We then have a
- * main pinmux function that can be overridden to enable all other pinmux that
- * is required on the board.
- */
-void enable_uart0_pin_mux(void);
-void enable_uart1_pin_mux(void);
-void enable_uart2_pin_mux(void);
-void enable_uart3_pin_mux(void);
-void enable_uart4_pin_mux(void);
-void enable_uart5_pin_mux(void);
-void enable_i2c0_pin_mux(void);
-void enable_board_pin_mux(void);
-
-/* Forwared declaration, defined in common board.c */
-void set_env_gpios(unsigned char state);
-#endif
+#endif /* _BOARD_DRACO_H_ */
diff --git a/board/siemens/draco/mux.c b/board/siemens/draco/mux.c
index 2632f050336..594da729058 100644
--- a/board/siemens/draco/mux.c
+++ b/board/siemens/draco/mux.c
@@ -16,7 +16,7 @@
#include <asm/arch/mux.h>
#include <asm/io.h>
#include <i2c.h>
-#include "board.h"
+#include "../common/board_am335x.h"
static struct module_pin_mux uart0_pin_mux[] = {
{OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */
diff --git a/board/siemens/pxm2/MAINTAINERS b/board/siemens/pxm2/MAINTAINERS
index dc02fe87c9b..49025446079 100644
--- a/board/siemens/pxm2/MAINTAINERS
+++ b/board/siemens/pxm2/MAINTAINERS
@@ -1,5 +1,5 @@
PXM2 BOARD
-M: Samuel Egli <samuel.egli at siemens.com>
+M: Enrico Leto <enrico.leto at siemens.com>
S: Maintained
F: board/siemens/pxm2/
F: include/configs/pxm2.h
diff --git a/board/siemens/pxm2/Makefile b/board/siemens/pxm2/Makefile
index e94456ab1c3..9091a94d375 100644
--- a/board/siemens/pxm2/Makefile
+++ b/board/siemens/pxm2/Makefile
@@ -14,6 +14,8 @@ obj-y := mux.o
endif
obj-y += board.o
+obj-y += ../common/board.o
+obj-y += ../common/board_am335x.o
ifndef CONFIG_SPL_BUILD
obj-y += ../common/factoryset.o
endif
diff --git a/board/siemens/pxm2/board.c b/board/siemens/pxm2/board.c
index 2b061aedfc7..066ca61d60a 100644
--- a/board/siemens/pxm2/board.c
+++ b/board/siemens/pxm2/board.c
@@ -35,14 +35,14 @@
#include <miiphy.h>
#include <cpsw.h>
#include <watchdog.h>
-#include "board.h"
-#include "../common/factoryset.h"
#include "pmic.h"
#include <nand.h>
#include <bmp_layout.h>
+#include "../common/board_am335x.h"
+#include "../common/factoryset.h"
#ifdef CONFIG_SPL_BUILD
-static void board_init_ddr(void)
+void siemens_init_ddr(void)
{
struct emif_regs pxm2_ddr3_emif_reg_data = {
.sdram_config = 0x41805332,
@@ -161,7 +161,7 @@ void spl_siemens_board_init(void)
}
}
-int read_eeprom(void)
+int siemens_read_eeprom(void)
{
/* nothing ToDo here for this board */
@@ -274,5 +274,3 @@ int board_late_init(void)
return 0;
}
#endif
-
-#include "../common/board.c"
diff --git a/board/siemens/pxm2/board.h b/board/siemens/pxm2/board.h
deleted file mode 100644
index 9067e4d5aa8..00000000000
--- a/board/siemens/pxm2/board.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * board.h
- *
- * (C) Copyright 2013 Siemens Schweiz AG
- * (C) Heiko Schocher, DENX Software Engineering, hs at denx.de.
- *
- * Based on:
- * TI AM335x boards information header
- * u-boot:/board/ti/am335x/board.h
- *
- * Copyright (C) 2011, Texas Instruments, Incorporated - https://www.ti.com/
- */
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-void enable_uart0_pin_mux(void);
-void enable_i2c0_pin_mux(void);
-void enable_board_pin_mux(void);
-#endif
diff --git a/board/siemens/pxm2/mux.c b/board/siemens/pxm2/mux.c
index d21ef47771d..9d3cb5c31b9 100644
--- a/board/siemens/pxm2/mux.c
+++ b/board/siemens/pxm2/mux.c
@@ -17,7 +17,7 @@
#include <asm/arch/mux.h>
#include <asm/io.h>
#include <i2c.h>
-#include "board.h"
+#include "../common/board_am335x.h"
static struct module_pin_mux uart0_pin_mux[] = {
{OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */
diff --git a/board/siemens/rut/MAINTAINERS b/board/siemens/rut/MAINTAINERS
index 1e92710904b..4d8e2567099 100644
--- a/board/siemens/rut/MAINTAINERS
+++ b/board/siemens/rut/MAINTAINERS
@@ -1,5 +1,5 @@
RUT BOARD
-M: Samuel Egli <samuel.egli at siemens.com>
+M: Enrico Leto <enrico.leto at siemens.com>
S: Maintained
F: board/siemens/rut/
F: include/configs/rut.h
diff --git a/board/siemens/rut/Makefile b/board/siemens/rut/Makefile
index e94456ab1c3..9091a94d375 100644
--- a/board/siemens/rut/Makefile
+++ b/board/siemens/rut/Makefile
@@ -14,6 +14,8 @@ obj-y := mux.o
endif
obj-y += board.o
+obj-y += ../common/board.o
+obj-y += ../common/board_am335x.o
ifndef CONFIG_SPL_BUILD
obj-y += ../common/factoryset.o
endif
diff --git a/board/siemens/rut/board.c b/board/siemens/rut/board.c
index a530b841a97..2c6fbfe1201 100644
--- a/board/siemens/rut/board.c
+++ b/board/siemens/rut/board.c
@@ -35,19 +35,19 @@
#include <video.h>
#include <watchdog.h>
#include <linux/delay.h>
-#include "board.h"
+#include "../common/board_am335x.h"
#include "../common/factoryset.h"
#ifdef CONFIG_SPL_BUILD
/*
* Read header information from EEPROM into global structure.
*/
-static int read_eeprom(void)
+int siemens_read_eeprom(void)
{
return 0;
}
-static void board_init_ddr(void)
+void siemens_init_ddr(void)
{
struct emif_regs rut_ddr3_emif_reg_data = {
.sdram_config = 0x61C04AB2,
@@ -124,7 +124,7 @@ err:
#define REQUEST_AND_PULSE_RESET(N) \
request_and_pulse_reset(N, #N);
-static void spl_siemens_board_init(void)
+void spl_siemens_board_init(void)
{
REQUEST_AND_PULSE_RESET(ETH_PHY_RESET_GPIO);
REQUEST_AND_PULSE_RESET(MAXTOUCH_RESET_GPIO);
@@ -244,5 +244,3 @@ int board_late_init(void)
return 0;
}
#endif
-
-#include "../common/board.c"
diff --git a/board/siemens/rut/board.h b/board/siemens/rut/board.h
deleted file mode 100644
index 9067e4d5aa8..00000000000
--- a/board/siemens/rut/board.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * board.h
- *
- * (C) Copyright 2013 Siemens Schweiz AG
- * (C) Heiko Schocher, DENX Software Engineering, hs at denx.de.
- *
- * Based on:
- * TI AM335x boards information header
- * u-boot:/board/ti/am335x/board.h
- *
- * Copyright (C) 2011, Texas Instruments, Incorporated - https://www.ti.com/
- */
-
-#ifndef _BOARD_H_
-#define _BOARD_H_
-
-void enable_uart0_pin_mux(void);
-void enable_i2c0_pin_mux(void);
-void enable_board_pin_mux(void);
-#endif
diff --git a/board/siemens/rut/mux.c b/board/siemens/rut/mux.c
index 894a9bf1e3d..090c898ccad 100644
--- a/board/siemens/rut/mux.c
+++ b/board/siemens/rut/mux.c
@@ -17,6 +17,7 @@
#include <asm/arch/mux.h>
#include <asm/io.h>
#include <i2c.h>
+#include "../common/board_am335x.h"
static struct module_pin_mux uart0_pin_mux[] = {
{OFFSET(uart0_rxd), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* UART0_RXD */
--
2.30.2
More information about the U-Boot
mailing list