[PATCH 02/19] sunxi: sun50i-h6: remove unneeded base addresses from header

[Andre Przywara]

The cpu_sun50i_h6.h header file defined the base addresses for quite some
peripherals of the Allwinner H6 and related CPUs, even though we now only
use a fraction of that.
Most of the addresses are now either read from the DT, or were never used
in U-Boot in the first place.

Removed the ones that are not used in the whole of the U-Boot source.
to make it clear that this file only contains addresses that are needed
for the SPL operation.

Signed-off-by: Andre Przywara <andre.przywara at arm.com>
---
 .../include/asm/arch-sunxi/cpu_sun50i_h6.h    | 21 -------------------
 1 file changed, 21 deletions(-)

diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h b/arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h
index 15ee092d358..8a3f465545a 100644
--- a/arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h
+++ b/arch/arm/include/asm/arch-sunxi/cpu_sun50i_h6.h
@@ -7,25 +7,14 @@
 #ifndef _SUNXI_CPU_SUN50I_H6_H
 #define _SUNXI_CPU_SUN50I_H6_H
 
-#define SUNXI_SRAM_A1_BASE		CONFIG_SUNXI_SRAM_ADDRESS
-#define SUNXI_SRAM_C_BASE		0x00028000
-#define SUNXI_SRAM_A2_BASE		0x00100000
-
-#define SUNXI_DE3_BASE			0x01000000
-#define SUNXI_SS_BASE			0x01904000
-#define SUNXI_EMCE_BASE			0x01905000
-
 #define SUNXI_SRAMC_BASE		0x03000000
 #define SUNXI_CCM_BASE			0x03001000
-#define SUNXI_DMA_BASE			0x03002000
 /* SID address space starts at 0x03006000, but e-fuse is at offset 0x200 */
 #define SUNXI_SIDC_BASE			0x03006000
 #define SUNXI_SID_BASE			0x03006200
 #define SUNXI_TIMER_BASE		0x03009000
-#define SUNXI_PSI_BASE			0x0300C000
 
 #define SUNXI_GIC400_BASE		0x03020000
-#define SUNXI_IOMMU_BASE		0x030F0000
 
 #ifdef CONFIG_MACH_SUN50I_H6
 #define SUNXI_DRAM_COM_BASE		0x04002000
@@ -46,18 +35,8 @@
 #define SUNXI_TWI1_BASE			0x05002400
 #define SUNXI_TWI2_BASE			0x05002800
 #define SUNXI_TWI3_BASE			0x05002C00
-#define SUNXI_SPI0_BASE			0x05010000
-#define SUNXI_SPI1_BASE			0x05011000
-#define SUNXI_GMAC_BASE			0x05020000
-#define SUNXI_USB0_BASE			0x05100000
-#define SUNXI_XHCI_BASE			0x05200000
-#define SUNXI_USB3_BASE			0x05311000
-#define SUNXI_PCIE_BASE			0x05400000
 
 #define SUNXI_HDMI_BASE			0x06000000
-#define SUNXI_TCON_TOP_BASE		0x06510000
-#define SUNXI_TCON_LCD0_BASE		0x06511000
-#define SUNXI_TCON_TV0_BASE		0x06515000
 
 #define SUNXI_RTC_BASE			0x07000000
 #define SUNXI_R_CPUCFG_BASE		0x07000400
-- 
2.35.8