[PATCH v4 6/7] beagleplay: Add DFU support

[Sjoerd Simons]

DFU mode on a beagleplay can be used via the Type-C connector by holding
the USR switch while powering on.

Configuration is only added for the A53 u-boot parts, for R5 the
am62x_r5_usbdfu.config fragment should be used.

Signed-off-by: Sjoerd Simons <sjoerd at collabora.com>

---

Changes in v4:
- New patch

 arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi |  8 ++++++
 board/beagle/beagleplay/beagleplay.env       |  1 +
 configs/am62x_beagleplay_a53_defconfig       | 30 ++++++++++++++++++++
 3 files changed, 39 insertions(+)

diff --git a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
index a723caa5805..0b1e5e70fe2 100644
--- a/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
+++ b/arch/arm/dts/k3-am625-beagleplay-u-boot.dtsi
@@ -61,6 +61,14 @@
 	>;
 };
 
+&usbss0 {
+	bootph-all;
+};
+
+&usb0 {
+	bootph-all;
+};
+
 #ifdef CONFIG_TARGET_AM625_A53_BEAGLEPLAY
 
 #define SPL_NODTB "spl/u-boot-spl-nodtb.bin"
diff --git a/board/beagle/beagleplay/beagleplay.env b/board/beagle/beagleplay/beagleplay.env
index 4f0a94a8113..85c94856017 100644
--- a/board/beagle/beagleplay/beagleplay.env
+++ b/board/beagle/beagleplay/beagleplay.env
@@ -1,6 +1,7 @@
 #include <env/ti/ti_common.env>
 #include <env/ti/default_findfdt.env>
 #include <env/ti/mmc.env>
+#include <env/ti/k3_dfu.env>
 
 name_kern=Image
 console=ttyS2,115200n8
diff --git a/configs/am62x_beagleplay_a53_defconfig b/configs/am62x_beagleplay_a53_defconfig
index 0be20045a97..dfe04b71810 100644
--- a/configs/am62x_beagleplay_a53_defconfig
+++ b/configs/am62x_beagleplay_a53_defconfig
@@ -1,5 +1,6 @@
 CONFIG_ARM=y
 CONFIG_ARCH_K3=y
+CONFIG_SYS_MALLOC_LEN=0x2000000
 CONFIG_SYS_MALLOC_F_LEN=0x8000
 CONFIG_SPL_GPIO=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
@@ -43,15 +44,20 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_STACK_R=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
+CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
 CONFIG_SPL_I2C=y
 CONFIG_SPL_DM_MAILBOX=y
 CONFIG_SPL_POWER_DOMAIN=y
+CONFIG_SPL_RAM_SUPPORT=y
+CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_YMODEM_SUPPORT=y
+CONFIG_CMD_DFU=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPIO_READ=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
 CONFIG_CMD_PMIC=y
 CONFIG_CMD_REGULATOR=y
 CONFIG_OF_CONTROL=y
@@ -68,6 +74,10 @@ CONFIG_SPL_OF_TRANSLATE=y
 CONFIG_CLK=y
 CONFIG_SPL_CLK=y
 CONFIG_CLK_TI_SCI=y
+CONFIG_DFU_MMC=y
+CONFIG_DFU_RAM=y
+CONFIG_SYS_DFU_DATA_BUF_SIZE=0x5000
+CONFIG_SYS_DFU_MAX_FILE_SIZE=0x800000
 CONFIG_DMA_CHANNELS=y
 CONFIG_TI_K3_NAVSS_UDMA=y
 CONFIG_TI_SCI_PROTOCOL=y
@@ -113,6 +123,26 @@ CONFIG_SOC_TI=y
 CONFIG_SYSRESET=y
 CONFIG_SPL_SYSRESET=y
 CONFIG_SYSRESET_TI_SCI=y
+CONFIG_USB=y
+CONFIG_DM_USB_GADGET=y
+CONFIG_SPL_DM_USB_GADGET=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
+CONFIG_SPL_USB_DWC3_GENERIC=y
+CONFIG_SPL_USB_DWC3_AM62=y
+CONFIG_USB_DWC3_AM62=y
+CONFIG_USB_GADGET=y
+CONFIG_SPL_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0451
+CONFIG_USB_GADGET_PRODUCT_NUM=0x6165
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_SPL_DFU=y
 CONFIG_EXT4_WRITE=y
 CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
 CONFIG_LZO=y
+CONFIG_SYSCON=y
+CONFIG_SPL_SYSCON=y
+
-- 
2.43.0