[PATCH v2 RESEND] mmc: dw_mmc: reset controller after data error

Jaehoon Chung jh80.chung at samsung.com
Thu Jan 18 02:21:01 CET 2024


On 6/19/23 19:33, Eugen Hristev wrote:
> From: Ziyuan Xu <xzy.xu at rock-chips.com>
> 
> Per dw_mmc databook, it's recommended to reset the host controller if
> some data-related error occurred.
> Implement a reset mechanism.
> 
> Signed-off-by: Ziyuan Xu <xzy.xu at rock-chips.com>
> Co-developed-by: Jason Zhu <jason.zhu at rock-chips.com>
> Signed-off-by: Jason Zhu <jason.zhu at rock-chips.com>
> [eugen.hristev at collabora.com: modified a bit the variables initialization]
> Signed-off-by: Eugen Hristev <eugen.hristev at collabora.com>
> Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Reviewed-by: Jaehoon Chung <jh80.chung at samsung.com>

Best Regards,
Jaehoon Chung

> ---
>  drivers/mmc/dw_mmc.c | 20 +++++++++++++++++++-
>  1 file changed, 19 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c
> index 5085a3b491da..d6cad998b0cd 100644
> --- a/drivers/mmc/dw_mmc.c
> +++ b/drivers/mmc/dw_mmc.c
> @@ -138,7 +138,7 @@ static int dwmci_data_transfer(struct dwmci_host *host, struct mmc_data *data)
>  {
>  	struct mmc *mmc = host->mmc;
>  	int ret = 0;
> -	u32 timeout, mask, size, i, len = 0;
> +	u32 timeout, reset_timeout = 100, status, ctrl, mask, size, i, len = 0;
>  	u32 *buf = NULL;
>  	ulong start = get_timer(0);
>  	u32 fifo_depth = (((host->fifoth_val & RX_WMARK_MASK) >>
> @@ -159,6 +159,24 @@ static int dwmci_data_transfer(struct dwmci_host *host, struct mmc_data *data)
>  		/* Error during data transfer. */
>  		if (mask & (DWMCI_DATA_ERR | DWMCI_DATA_TOUT)) {
>  			debug("%s: DATA ERROR!\n", __func__);
> +
> +			dwmci_wait_reset(host, DWMCI_RESET_ALL);
> +			dwmci_writel(host, DWMCI_CMD, DWMCI_CMD_PRV_DAT_WAIT |
> +				     DWMCI_CMD_UPD_CLK | DWMCI_CMD_START);
> +
> +			do {
> +				status = dwmci_readl(host, DWMCI_CMD);
> +				if (!reset_timeout--)
> +					break;
> +				udelay(100);
> +			} while (status & DWMCI_CMD_START);
> +
> +			if (!host->fifo_mode) {
> +				ctrl = dwmci_readl(host, DWMCI_BMOD);
> +				ctrl |= DWMCI_BMOD_IDMAC_RESET;
> +				dwmci_writel(host, DWMCI_BMOD, ctrl);
> +			}
> +
>  			ret = -EINVAL;
>  			break;
>  		}



More information about the U-Boot mailing list