[PATCH 0/2] board: visionfive2: add pad drive strength config

[Lukasz Tekieli]

gmac0 does not work correctly with the default settings of the pad
drive strength. 100Mbit link does not work at all. This series fixes
the issue by porting the pad drive strength register configuration
from the Linux driver from commit
67a8976780858461b3c2d0dc501d207452543c53.

Lukasz Tekieli (2):
  net: phy: motorcomm: configure pad drive strength register
  board: visionfive2: configure PHY pad drive strength

 board/starfive/visionfive2/spl.c |   8 ++
 drivers/net/phy/motorcomm.c      | 130 +++++++++++++++++++++++++++++++
 2 files changed, 138 insertions(+)

--
2.39.2