[PATCH 1/7] rockchip: rk356x: Sync device tree from linux v6.7
Jonas Karlman
jonas at kwiboo.se
Fri Jan 26 23:14:49 CET 2024
Sync rk356x device tree from linux v6.7.
Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
---
arch/arm/dts/rk3566-anbernic-rgxx3.dtsi | 42 +++++++++++++------------
arch/arm/dts/rk3566-quartz64-a.dts | 2 --
arch/arm/dts/rk3566-quartz64-b.dts | 2 --
arch/arm/dts/rk3566-radxa-cm3-io.dts | 4 +--
arch/arm/dts/rk3566-soquartz.dtsi | 3 --
arch/arm/dts/rk3568-evb.dts | 3 --
arch/arm/dts/rk3568-lubancat-2.dts | 3 --
arch/arm/dts/rk3568-nanopi-r5s.dtsi | 3 --
arch/arm/dts/rk3568-odroid-m1.dts | 3 --
arch/arm/dts/rk3568-radxa-cm3i.dtsi | 3 --
arch/arm/dts/rk3568-rock-3a.dts | 7 +++--
arch/arm/dts/rk356x.dtsi | 20 +++++++++++-
include/dt-bindings/clock/rk3568-cru.h | 1 +
13 files changed, 48 insertions(+), 48 deletions(-)
diff --git a/arch/arm/dts/rk3566-anbernic-rgxx3.dtsi b/arch/arm/dts/rk3566-anbernic-rgxx3.dtsi
index ad43fa199ca5..8cbf3d9a4f22 100644
--- a/arch/arm/dts/rk3566-anbernic-rgxx3.dtsi
+++ b/arch/arm/dts/rk3566-anbernic-rgxx3.dtsi
@@ -191,30 +191,30 @@
};
};
- leds: gpio-leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
+ leds: pwm-leds {
+ compatible = "pwm-leds";
green_led: led-0 {
color = <LED_COLOR_ID_GREEN>;
default-state = "on";
function = LED_FUNCTION_POWER;
- gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+ max-brightness = <255>;
+ pwms = <&pwm6 0 25000 0>;
};
amber_led: led-1 {
color = <LED_COLOR_ID_AMBER>;
function = LED_FUNCTION_CHARGING;
- gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
- retain-state-suspended;
+ max-brightness = <255>;
+ pwms = <&pwm7 0 25000 0>;
};
red_led: led-2 {
color = <LED_COLOR_ID_RED>;
default-state = "off";
function = LED_FUNCTION_STATUS;
- gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
+ max-brightness = <255>;
+ pwms = <&pwm0 0 25000 0>;
};
};
@@ -356,7 +356,6 @@
regulator-boot-on;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
- regulator-init-microvolt = <900000>;
regulator-ramp-delay = <6001>;
regulator-initial-mode = <0x2>;
regulator-name = "vdd_logic";
@@ -371,7 +370,6 @@
regulator-boot-on;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
- regulator-init-microvolt = <900000>;
regulator-ramp-delay = <6001>;
regulator-initial-mode = <0x2>;
regulator-name = "vdd_gpu";
@@ -533,7 +531,6 @@
regulator-boot-on;
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1390000>;
- regulator-init-microvolt = <900000>;
regulator-name = "vdd_cpu";
regulator-ramp-delay = <2300>;
vin-supply = <&vcc_sys>;
@@ -597,15 +594,6 @@
};
};
- gpio-led {
- led_pins: led-pins {
- rockchip,pins =
- <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>,
- <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>,
- <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
joy-mux {
joy_mux_en: joy-mux-en {
rockchip,pins =
@@ -654,10 +642,24 @@
vccio7-supply = <&vcc_3v3>;
};
+&pwm0 {
+ pinctrl-0 = <&pwm0m1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
&pwm5 {
status = "okay";
};
+&pwm6 {
+ status = "okay";
+};
+
+&pwm7 {
+ status = "okay";
+};
+
&saradc {
vref-supply = <&vcc_1v8>;
status = "okay";
diff --git a/arch/arm/dts/rk3566-quartz64-a.dts b/arch/arm/dts/rk3566-quartz64-a.dts
index 25a8c781f4e7..854d02b46e6f 100644
--- a/arch/arm/dts/rk3566-quartz64-a.dts
+++ b/arch/arm/dts/rk3566-quartz64-a.dts
@@ -366,7 +366,6 @@
regulator-boot-on;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
- regulator-init-microvolt = <900000>;
regulator-ramp-delay = <6001>;
regulator-initial-mode = <0x2>;
regulator-name = "vdd_logic";
@@ -381,7 +380,6 @@
regulator-boot-on;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
- regulator-init-microvolt = <900000>;
regulator-ramp-delay = <6001>;
regulator-initial-mode = <0x2>;
regulator-name = "vdd_gpu";
diff --git a/arch/arm/dts/rk3566-quartz64-b.dts b/arch/arm/dts/rk3566-quartz64-b.dts
index b276eb0810c7..2d92713be2a0 100644
--- a/arch/arm/dts/rk3566-quartz64-b.dts
+++ b/arch/arm/dts/rk3566-quartz64-b.dts
@@ -277,7 +277,6 @@
regulator-boot-on;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
- regulator-init-microvolt = <900000>;
regulator-ramp-delay = <6001>;
regulator-state-mem {
@@ -292,7 +291,6 @@
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1350000>;
- regulator-init-microvolt = <900000>;
regulator-ramp-delay = <6001>;
regulator-state-mem {
diff --git a/arch/arm/dts/rk3566-radxa-cm3-io.dts b/arch/arm/dts/rk3566-radxa-cm3-io.dts
index 5e4236af4fcb..1b1c67d5b1ef 100644
--- a/arch/arm/dts/rk3566-radxa-cm3-io.dts
+++ b/arch/arm/dts/rk3566-radxa-cm3-io.dts
@@ -137,8 +137,8 @@
&mdio1 {
rgmii_phy1: ethernet-phy at 0 {
- compatible="ethernet-phy-ieee802.3-c22";
- reg= <0x0>;
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x0>;
};
};
diff --git a/arch/arm/dts/rk3566-soquartz.dtsi b/arch/arm/dts/rk3566-soquartz.dtsi
index 31aa2b8efe39..63bae36b8f7e 100644
--- a/arch/arm/dts/rk3566-soquartz.dtsi
+++ b/arch/arm/dts/rk3566-soquartz.dtsi
@@ -234,7 +234,6 @@
regulator-boot-on;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
- regulator-init-microvolt = <900000>;
regulator-ramp-delay = <6001>;
regulator-initial-mode = <0x2>;
regulator-state-mem {
@@ -249,7 +248,6 @@
regulator-boot-on;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
- regulator-init-microvolt = <900000>;
regulator-ramp-delay = <6001>;
regulator-initial-mode = <0x2>;
regulator-state-mem {
@@ -272,7 +270,6 @@
regulator-boot-on;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
- regulator-init-microvolt = <900000>;
regulator-initial-mode = <0x2>;
regulator-name = "vdd_npu";
regulator-state-mem {
diff --git a/arch/arm/dts/rk3568-evb.dts b/arch/arm/dts/rk3568-evb.dts
index 674792567fa6..19f8fc369b13 100644
--- a/arch/arm/dts/rk3568-evb.dts
+++ b/arch/arm/dts/rk3568-evb.dts
@@ -293,7 +293,6 @@
regulator-name = "vdd_logic";
regulator-always-on;
regulator-boot-on;
- regulator-init-microvolt = <900000>;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
@@ -307,7 +306,6 @@
vdd_gpu: DCDC_REG2 {
regulator-name = "vdd_gpu";
regulator-always-on;
- regulator-init-microvolt = <900000>;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
@@ -331,7 +329,6 @@
vdd_npu: DCDC_REG4 {
regulator-name = "vdd_npu";
- regulator-init-microvolt = <900000>;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
diff --git a/arch/arm/dts/rk3568-lubancat-2.dts b/arch/arm/dts/rk3568-lubancat-2.dts
index e653b067aa5d..a8a4cc190eb3 100644
--- a/arch/arm/dts/rk3568-lubancat-2.dts
+++ b/arch/arm/dts/rk3568-lubancat-2.dts
@@ -243,7 +243,6 @@
regulator-boot-on;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
- regulator-init-microvolt = <900000>;
regulator-ramp-delay = <6001>;
regulator-initial-mode = <0x2>;
@@ -258,7 +257,6 @@
regulator-boot-on;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
- regulator-init-microvolt = <900000>;
regulator-ramp-delay = <6001>;
regulator-initial-mode = <0x2>;
@@ -284,7 +282,6 @@
regulator-boot-on;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
- regulator-init-microvolt = <900000>;
regulator-ramp-delay = <6001>;
regulator-initial-mode = <0x2>;
diff --git a/arch/arm/dts/rk3568-nanopi-r5s.dtsi b/arch/arm/dts/rk3568-nanopi-r5s.dtsi
index 58ba328ea782..93189f830640 100644
--- a/arch/arm/dts/rk3568-nanopi-r5s.dtsi
+++ b/arch/arm/dts/rk3568-nanopi-r5s.dtsi
@@ -232,7 +232,6 @@
regulator-name = "vdd_logic";
regulator-always-on;
regulator-boot-on;
- regulator-init-microvolt = <900000>;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
@@ -246,7 +245,6 @@
vdd_gpu: DCDC_REG2 {
regulator-name = "vdd_gpu";
regulator-always-on;
- regulator-init-microvolt = <900000>;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
@@ -270,7 +268,6 @@
vdd_npu: DCDC_REG4 {
regulator-name = "vdd_npu";
- regulator-init-microvolt = <900000>;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
diff --git a/arch/arm/dts/rk3568-odroid-m1.dts b/arch/arm/dts/rk3568-odroid-m1.dts
index 59ecf868dbd0..a337f547caf5 100644
--- a/arch/arm/dts/rk3568-odroid-m1.dts
+++ b/arch/arm/dts/rk3568-odroid-m1.dts
@@ -291,7 +291,6 @@
regulator-name = "vdd_logic";
regulator-always-on;
regulator-boot-on;
- regulator-init-microvolt = <900000>;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
@@ -305,7 +304,6 @@
vdd_gpu: DCDC_REG2 {
regulator-name = "vdd_gpu";
regulator-always-on;
- regulator-init-microvolt = <900000>;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
@@ -329,7 +327,6 @@
vdd_npu: DCDC_REG4 {
regulator-name = "vdd_npu";
- regulator-init-microvolt = <900000>;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
diff --git a/arch/arm/dts/rk3568-radxa-cm3i.dtsi b/arch/arm/dts/rk3568-radxa-cm3i.dtsi
index c50fbdd48680..45b03dcbbad4 100644
--- a/arch/arm/dts/rk3568-radxa-cm3i.dtsi
+++ b/arch/arm/dts/rk3568-radxa-cm3i.dtsi
@@ -163,7 +163,6 @@
regulator-name = "vdd_logic";
regulator-always-on;
regulator-boot-on;
- regulator-init-microvolt = <900000>;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
@@ -177,7 +176,6 @@
vdd_gpu: DCDC_REG2 {
regulator-name = "vdd_gpu";
regulator-always-on;
- regulator-init-microvolt = <900000>;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
@@ -201,7 +199,6 @@
vdd_npu: DCDC_REG4 {
regulator-name = "vdd_npu";
- regulator-init-microvolt = <900000>;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
diff --git a/arch/arm/dts/rk3568-rock-3a.dts b/arch/arm/dts/rk3568-rock-3a.dts
index 917f5b2b8aab..a5e974ea659e 100644
--- a/arch/arm/dts/rk3568-rock-3a.dts
+++ b/arch/arm/dts/rk3568-rock-3a.dts
@@ -15,6 +15,7 @@
ethernet0 = &gmac1;
mmc0 = &sdhci;
mmc1 = &sdmmc0;
+ mmc2 = &sdmmc2;
};
chosen: chosen {
@@ -350,7 +351,6 @@
regulator-name = "vdd_logic";
regulator-always-on;
regulator-boot-on;
- regulator-init-microvolt = <900000>;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
@@ -364,7 +364,6 @@
vdd_gpu: DCDC_REG2 {
regulator-name = "vdd_gpu";
regulator-always-on;
- regulator-init-microvolt = <900000>;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
@@ -388,7 +387,6 @@
vdd_npu: DCDC_REG4 {
regulator-name = "vdd_npu";
- regulator-init-microvolt = <900000>;
regulator-initial-mode = <0x2>;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
@@ -750,6 +748,9 @@
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc2m0_bus4 &sdmmc2m0_cmd &sdmmc2m0_clk>;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
sd-uhs-sdr104;
vmmc-supply = <&vcc3v3_sys>;
vqmmc-supply = <&vcc_1v8>;
diff --git a/arch/arm/dts/rk356x.dtsi b/arch/arm/dts/rk356x.dtsi
index 61680c7ac489..c19c0f1b3778 100644
--- a/arch/arm/dts/rk356x.dtsi
+++ b/arch/arm/dts/rk356x.dtsi
@@ -613,6 +613,17 @@
#iommu-cells = <0>;
};
+ rga: rga at fdeb0000 {
+ compatible = "rockchip,rk3568-rga", "rockchip,rk3288-rga";
+ reg = <0x0 0xfdeb0000 0x0 0x180>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru CLK_RGA_CORE>;
+ clock-names = "aclk", "hclk", "sclk";
+ resets = <&cru SRST_RGA_CORE>, <&cru SRST_A_RGA>, <&cru SRST_H_RGA>;
+ reset-names = "core", "axi", "ahb";
+ power-domains = <&power RK3568_PD_RGA>;
+ };
+
vepu: video-codec at fdee0000 {
compatible = "rockchip,rk3568-vepu";
reg = <0x0 0xfdee0000 0x0 0x800>;
@@ -948,6 +959,13 @@
reg = <0x0 0xfe1a8100 0x0 0x20>;
};
+ dfi: dfi at fe230000 {
+ compatible = "rockchip,rk3568-dfi";
+ reg = <0x00 0xfe230000 0x00 0x400>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ rockchip,pmu = <&pmugrf>;
+ };
+
pcie2x1: pcie at fe260000 {
compatible = "rockchip,rk3568-pcie";
reg = <0x3 0xc0000000 0x0 0x00400000>,
@@ -959,7 +977,7 @@
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "sys", "pmc", "msi", "legacy", "err";
+ interrupt-names = "sys", "pmc", "msg", "legacy", "err";
bus-range = <0x0 0xf>;
clocks = <&cru ACLK_PCIE20_MST>, <&cru ACLK_PCIE20_SLV>,
<&cru ACLK_PCIE20_DBI>, <&cru PCLK_PCIE20>,
diff --git a/include/dt-bindings/clock/rk3568-cru.h b/include/dt-bindings/clock/rk3568-cru.h
index c1942422a438..d29890865150 100644
--- a/include/dt-bindings/clock/rk3568-cru.h
+++ b/include/dt-bindings/clock/rk3568-cru.h
@@ -478,6 +478,7 @@
#define CPLL_50M 415
#define CPLL_25M 416
#define CPLL_100M 417
+#define SCLK_DDRCLK 418
#define PCLK_CORE_PVTM 450
--
2.43.0
More information about the U-Boot
mailing list