[PATCH 00/10] Add support for Ethernet Boot on SK-AM62

[Nishanth Menon]

On 12:17-20240112, Siddharth Vadapalli wrote:
> Hello,
> 
> This series enables Ethernet Boot on SK-AM62 device.
> Product Link: https://www.ti.com/tool/SK-AM62
> User Guide: https://www.ti.com/lit/pdf/spruj40
> 
> Ethernet Boot flow is as follows:
> 1. The BOOT MODE pins are configured for Ethernet Boot.
> 2. On powering on the device, ROM uses the Ethernet Port corresponding
> to CPSW3G's MAC Port 1 to transmit "TI K3 Bootp Boot".
> 3. The TFTP server and DHCP server on the receiver device need to be
> configured such that VCI string "TI K3 Bootp Boot" maps to the file
> "tiboot3.bin" and the TFTP server should be capable of transferring
> it to the device.
> 4. ROM loads and executes "tiboot3.bin" provided by the TFTP server.
> 5. The "tiboot3.bin" file is expected to be built using the config:
> am62x_evm_r5_ethboot_defconfig
> introduced in this series, which shall enable "tispl.bin" to be fetched
> over TFTP using "tiboot3.bin".
> 6. "tiboot3.bin" is configured to transmit "AM62X U-Boot R5 SPL" as its
> NET_VCI_STRING, thereby implying that the DHCP server and TFTP server
> need to be configured to transfer "tispl.bin" to the device.
> 7. "tiboot3.bin" loads and executes "tispl.bin" provided by the TFTP
> server.
> 8. The "tispl.bin" file is expected to be built using the config:
> am62x_evm_a53_defconfig
> which has been updated in this series to enable Ethernet Boot specific
> configs, allowing "u-boot.img" to be fetched over TFTP using
> "tispl.bin".
> 9. "tispl.bin" is configured to transmit "AM62X U-Boot A53 SPL" as its
> NET_VCI_STRING. The DHCP server and TFTP server need to be configured to
> transfer "u-boot.img" to the device for the aforementioned NET_VCI_STRING.
> 10. "tispl.bin" then fetches "u-boot.img" using TFTP and loads and
> executes it on the device, completing the process of Ethernet Boot on the
> device.
> 
> NOTE: ROM configures CPSW3G's MAC Port 1 for 100 Mbps full-duplex mode
> of operation due to which it is expected that the Link Partner also
> supports the same mode of operation.
> Additionally, enabling "phy_gmii_sel" node at SPL stage will be
> necessary and is not added as a part of this series with the aim of
> adding the "bootph-all" property to its counterpart in Linux device-tree
> first.


NAK - instead of writing all this up in the commit message, why would
you not spend that time updating the excellent documentation we have?

> 
> This series is based on commit:
> f28a77589e Merge tag 'dm-next-7jan23' of https://source.denx.de/u-boot/custodians/u-boot-dm into next
> of the next branch of u-boot.
> 
> Regards,
> Siddharth.
> 
> Andreas Dannenberg (1):
>   arm: mach-k3: am62: Update SoC autogenerated data to enable Ethernet
>     Boot
> 
> Kishon Vijay Abraham I (7):
>   board: ti: am62x: Init DRAM size in R5/A53 SPL
>   firmware: ti_sci: Add No-OP for "RX_FL_CFG"
>   soc: ti: k3-navss-ringacc: Initialize base address of ring cfg
>     registers
>   dma: ti: k3-udma: Add support for native configuration of chan/flow
>   arm: mach-k3: am625_init: Probe AM65 CPSW NUSS
>   configs: am62: Add configs for enabling ETHBOOT in R5SPL
>   configs: am62x_evm_a53_defconfig: Enable configs required for Ethboot
> 
> Siddharth Vadapalli (1):
>   arm: dts: k3-am625-r5-sk: Enable DM services for main_pktdma
> 
> Vignesh Raghavendra (1):
>   soc: ti: k3-navss-ringacc: Fix reset ring API
> 
>  arch/arm/dts/k3-am625-r5-sk.dts          |   5 ++
>  arch/arm/mach-k3/am625_init.c            |  10 +++
>  arch/arm/mach-k3/r5/am62x/clk-data.c     |  79 ++++++++--------
>  board/ti/am62x/evm.c                     |   3 +
>  configs/am62x_evm_a53_defconfig          |   8 ++
>  configs/am62x_evm_r5_ethboot_defconfig   | 110 +++++++++++++++++++++++
>  drivers/dma/ti/k3-udma.c                 |   6 ++
>  drivers/firmware/ti_sci.c                |   8 +-
>  drivers/soc/ti/k3-navss-ringacc-u-boot.c |   9 +-
>  drivers/soc/ti/k3-navss-ringacc.c        |   7 +-
>  10 files changed, 202 insertions(+), 43 deletions(-)
>  create mode 100644 configs/am62x_evm_r5_ethboot_defconfig
> 
> -- 
> 2.34.1
> 

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D