[PATCH 07/10] board: ti: am64x: evm: Remove redundant DDR functions

[Santhosh Kumar K]

Remove the redundant DDR functions and include the common file to
access the functions.

Signed-off-by: Santhosh Kumar K <s-k6 at ti.com>
---
 board/ti/am64x/evm.c | 71 ++++----------------------------------------
 1 file changed, 5 insertions(+), 66 deletions(-)

diff --git a/board/ti/am64x/evm.c b/board/ti/am64x/evm.c
index a7ca6be436eb..e3ba4bd70801 100644
--- a/board/ti/am64x/evm.c
+++ b/board/ti/am64x/evm.c
@@ -16,6 +16,7 @@
 #include <env.h>
 
 #include "../common/board_detect.h"
+#include "../common/k3-ddr-init.h"
 
 #define board_is_am64x_gpevm() (board_ti_k3_is("AM64-GPEVM") || \
 				board_ti_k3_is("AM64-EVM") || \
@@ -31,28 +32,6 @@ int board_init(void)
 	return 0;
 }
 
-int dram_init(void)
-{
-	s32 ret;
-
-	ret = fdtdec_setup_mem_size_base();
-	if (ret)
-		printf("Error setting up mem size and base. %d\n", ret);
-
-	return ret;
-}
-
-int dram_init_banksize(void)
-{
-	s32 ret;
-
-	ret = fdtdec_setup_memory_banksize();
-	if (ret)
-		printf("Error setting up memory banksize. %d\n", ret);
-
-	return ret;
-}
-
 #if defined(CONFIG_SPL_LOAD_FIT)
 int board_fit_config_name_match(const char *name)
 {
@@ -97,52 +76,12 @@ static int fixup_usb_boot(const void *fdt_blob)
 }
 #endif
 
-#if defined(CONFIG_K3_AM64_DDRSS)
-static void fixup_ddr_driver_for_ecc(struct spl_image_info *spl_image)
-{
-	struct udevice *dev;
-	int ret;
-
-	dram_init_banksize();
-
-	ret = uclass_get_device(UCLASS_RAM, 0, &dev);
-	if (ret)
-		panic("Cannot get RAM device for ddr size fixup: %d\n", ret);
-
-	ret = k3_ddrss_ddr_fdt_fixup(dev, spl_image->fdt_addr, gd->bd);
-	if (ret)
-		printf("Error fixing up ddr node for ECC use! %d\n", ret);
-}
-#else
-static void fixup_memory_node(struct spl_image_info *spl_image)
-{
-	u64 start[CONFIG_NR_DRAM_BANKS];
-	u64 size[CONFIG_NR_DRAM_BANKS];
-	int bank;
-	int ret;
-
-	dram_init();
-	dram_init_banksize();
-
-	for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) {
-		start[bank] =  gd->bd->bi_dram[bank].start;
-		size[bank] = gd->bd->bi_dram[bank].size;
-	}
-
-	/* dram_init functions use SPL fdt, and we must fixup u-boot fdt */
-	ret = fdt_fixup_memory_banks(spl_image->fdt_addr, start, size, CONFIG_NR_DRAM_BANKS);
-	if (ret)
-		printf("Error fixing up memory node! %d\n", ret);
-}
-#endif
-
 void spl_perform_fixups(struct spl_image_info *spl_image)
 {
-#if defined(CONFIG_K3_AM64_DDRSS)
-	fixup_ddr_driver_for_ecc(spl_image);
-#else
-	fixup_memory_node(spl_image);
-#endif
+	if (IS_ENABLED(CONFIG_K3_INLINE_ECC))
+		fixup_ddr_driver_for_ecc(spl_image);
+	else
+		fixup_memory_node(spl_image);
 
 #if CONFIG_IS_ENABLED(USB_STORAGE)
 	fixup_usb_boot(spl_image->fdt_addr);
-- 
2.34.1