[PATCH 08/10] board: beagle: beagleboneai64: Set fdtfile from C code instead of findfdt script
Jon Humphreys
j-humphreys at ti.com
Tue Jan 9 03:24:26 CET 2024
Nishanth Menon <nm at ti.com> writes:
> Stop using the findfdt script and switch to setting the fdtfile from C
> code.
>
> While at this, replace findfdt in environment with a warning as it is
> no longer needed
>
> Signed-off-by: Nishanth Menon <nm at ti.com>
> ---
> board/beagle/beagleboneai64/beagleboneai64.c | 14 ++++++++++++++
> board/beagle/beagleboneai64/beagleboneai64.env | 1 -
> configs/j721e_beagleboneai64_a72_defconfig | 3 ++-
> 3 files changed, 16 insertions(+), 2 deletions(-)
>
> diff --git a/board/beagle/beagleboneai64/beagleboneai64.c b/board/beagle/beagleboneai64/beagleboneai64.c
> index c8c1c78ae5a2..1982f738b04e 100644
> --- a/board/beagle/beagleboneai64/beagleboneai64.c
> +++ b/board/beagle/beagleboneai64/beagleboneai64.c
> @@ -28,3 +28,17 @@ int dram_init_banksize(void)
> {
> return fdtdec_setup_memory_banksize();
> }
> +
> +#ifdef CONFIG_BOARD_LATE_INIT
> +int board_late_init(void)
> +{
> + char fdtfile[50];
> +
> + snprintf(fdtfile, sizeof(fdtfile), "%s/%s.dtb",
> + CONFIG_TI_EVM_FDT_FOLDER_PATH, CONFIG_DEFAULT_DEVICE_TREE);
This would set the board to using the control DT, not boot DT. Is that
what you meant?
But anyway, why not just hard code the FDT path/name here since there is
only one for this board? I don't see the value in the extra logic of
using the config values (or having a fdt_map). (Same for beagleplay)
> +
> + env_set("fdtfile", fdtfile);
> +
> + return 0;
> +}
> +#endif
> diff --git a/board/beagle/beagleboneai64/beagleboneai64.env b/board/beagle/beagleboneai64/beagleboneai64.env
> index 4f0a94a8113e..647b25d14c8e 100644
> --- a/board/beagle/beagleboneai64/beagleboneai64.env
> +++ b/board/beagle/beagleboneai64/beagleboneai64.env
> @@ -1,5 +1,4 @@
> #include <env/ti/ti_common.env>
> -#include <env/ti/default_findfdt.env>
> #include <env/ti/mmc.env>
>
> name_kern=Image
> diff --git a/configs/j721e_beagleboneai64_a72_defconfig b/configs/j721e_beagleboneai64_a72_defconfig
> index 959f86844d32..9e53658eacb9 100644
> --- a/configs/j721e_beagleboneai64_a72_defconfig
> +++ b/configs/j721e_beagleboneai64_a72_defconfig
> @@ -34,7 +34,8 @@ CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n"
> CONFIG_AUTOBOOT_DELAY_STR="d"
> CONFIG_AUTOBOOT_STOP_STR=" "
> CONFIG_OF_SYSTEM_SETUP=y
> -CONFIG_BOOTCOMMAND="run set_led_state_start_load;run findfdt; run envboot; bootflow scan -lb;run set_led_state_fail_load"
> +CONFIG_BOOTCOMMAND="run set_led_state_start_load; run envboot; bootflow scan -lb;run set_led_state_fail_load"
> +CONFIG_BOARD_LATE_INIT=y
> CONFIG_LOGLEVEL=7
> CONFIG_SPL_MAX_SIZE=0xc0000
> CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
> --
> 2.43.0
More information about the U-Boot
mailing list