[PATCH v2] configs: Transpeed 8K618-T: Add Transpeed 8K618-T board support

[Andre Przywara]

On Thu, 18 Jan 2024 11:45:08 -0500
Nick Alilovic <nickalilovic at gmail.com> wrote:

Hi Nick,

> This is a Chinese TV box based on Allwinner H618 SoC.
> 
> The DRAM parameters were derived from the values found in a firmware update.
> 
> Signed-off-by: Nick Alilovic <nickalilovic at gmail.com>

Thanks for the fixes, looks good now:

Reviewed-by: Andre Przywara <andre.przywara at arm.com>

I will queue this after the DT files have been merged.

Cheers,
Andre

> ---
> This defconfig relies on the synced sun50i-h618-transpeed-8k618-t.dts file.
> 
>  configs/transpeed-8k618-t_defconfig | 27 +++++++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
>  create mode 100644 configs/transpeed-8k618-t_defconfig
> 
> diff --git a/configs/transpeed-8k618-t_defconfig b/configs/transpeed-8k618-t_defconfig
> new file mode 100644
> index 0000000000..020d3974af
> --- /dev/null
> +++ b/configs/transpeed-8k618-t_defconfig
> @@ -0,0 +1,27 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_SUNXI=y
> +CONFIG_DEFAULT_DEVICE_TREE="sun50i-h618-transpeed-8k618-t"
> +CONFIG_SPL=y
> +CONFIG_DRAM_SUN50I_H616_DX_ODT=0x03030303
> +CONFIG_DRAM_SUN50I_H616_DX_DRI=0x0e0e0e0e
> +CONFIG_DRAM_SUN50I_H616_CA_DRI=0x1f12
> +CONFIG_DRAM_SUN50I_H616_TPR0=0xc0001002
> +CONFIG_DRAM_SUN50I_H616_TPR10=0x2f1107
> +CONFIG_DRAM_SUN50I_H616_TPR11=0xddddcccc
> +CONFIG_DRAM_SUN50I_H616_TPR12=0xeddc7665
> +CONFIG_MACH_SUN50I_H616=y
> +CONFIG_SUNXI_DRAM_H616_DDR3_1333=y
> +CONFIG_DRAM_CLK=648
> +CONFIG_MMC_SUNXI_SLOT_EXTRA=2
> +CONFIG_R_I2C_ENABLE=y
> +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> +CONFIG_SPL_I2C=y
> +CONFIG_SPL_SYS_I2C_LEGACY=y
> +CONFIG_SYS_I2C_MVTWSI=y
> +CONFIG_SYS_I2C_SLAVE=0x7f
> +CONFIG_SYS_I2C_SPEED=400000
> +CONFIG_SUPPORT_EMMC_BOOT=y
> +CONFIG_AXP313_POWER=y
> +CONFIG_AXP_DCDC3_VOLT=1360
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_OHCI_HCD=y