[PATCH] test/py: zynqmp_rpu: Add test for loading RPU apps

Love Kumar love.kumar at amd.com
Fri Jan 19 06:36:41 CET 2024


Add testcases for loading RPU applications in split and lockstep mode
including the negative one for AMD's ZynqMP SoC.

Signed-off-by: Love Kumar <love.kumar at amd.com>
---
 test/py/tests/test_zynqmp_rpu.py | 208 +++++++++++++++++++++++++++++++
 1 file changed, 208 insertions(+)
 create mode 100644 test/py/tests/test_zynqmp_rpu.py

diff --git a/test/py/tests/test_zynqmp_rpu.py b/test/py/tests/test_zynqmp_rpu.py
new file mode 100644
index 000000000000..479a612b4ec2
--- /dev/null
+++ b/test/py/tests/test_zynqmp_rpu.py
@@ -0,0 +1,208 @@
+# SPDX-License-Identifier: GPL-2.0
+# (C) Copyright 2023, Advanced Micro Devices, Inc.
+
+import pytest
+import random
+import string
+import test_net
+
+"""
+Note: This test relies on boardenv_* containing configuration values to define
+RPU applications information for AMD's ZynqMP SoC which contains, application
+names, processors, address where it is built, expected output and the tftp load
+addresses. This test will be automatically skipped without this.
+
+It also relies on dhcp or setup_static net test to support tftp to load
+application on DDR. All the environment parameters are stored sequentially.
+The length of all parameters values should be same. For example, if 2 app_names
+are defined in a list as a value of parameter 'app_name' then the other
+parameters value also should have a list with 2 items.
+It will run RPU cases for all the applications defined in boardenv_*
+configuration file.
+
+Example:
+env__zynqmp_rpu_apps = {
+    'app_name': ['hello_world_r5_0_ddr.elf', 'hello_world_r5_1_ddr.elf'],
+    'proc': ['rpu0', 'rpu1'],
+    'cpu_num': [4, 5],
+    'addr': [0xA00000, 0xB00000],
+    'output': ['Successfully ran Hello World application on DDR from RPU0',
+               'Successfully ran Hello World application on DDR from RPU1'],
+    'tftp_addr': [0x100000, 0x200000],
+}
+"""
+
+# Get rpu apps params from env
+def get_rpu_apps_env(u_boot_console):
+    rpu_apps = u_boot_console.config.env.get('env__zynqmp_rpu_apps', False)
+    if not rpu_apps:
+        pytest.skip('ZynqMP RPU application info not defined!')
+
+    apps = rpu_apps.get('app_name', None)
+    if not apps:
+        pytest.skip('No RPU application found!')
+
+    procs = rpu_apps.get('proc', None)
+    if not procs:
+        pytest.skip('No RPU application processor provided!')
+
+    cpu_nums = rpu_apps.get('cpu_num', None)
+    if not cpu_nums:
+        pytest.skip('No CPU number for respective processor provided!')
+
+    addrs = rpu_apps.get('addr', None)
+    if not addrs:
+        pytest.skip('No RPU application build address found!')
+
+    outputs = rpu_apps.get('output', None)
+    if not outputs:
+        pytest.skip('Expected output not found!')
+
+    tftp_addrs = rpu_apps.get('tftp_addr', None)
+    if not tftp_addrs:
+        pytest.skip('TFTP address to load application not found!')
+
+    return apps, procs, cpu_nums, addrs, outputs, tftp_addrs
+
+# Check return code
+def ret_code(u_boot_console):
+    return u_boot_console.run_command('echo $?')
+
+# Initialize tcm
+def tcminit(u_boot_console, rpu_mode):
+    output = u_boot_console.run_command('zynqmp tcminit %s' % rpu_mode)
+    assert 'Initializing TCM overwrites TCM content' in output
+    return ret_code(u_boot_console)
+
+# Load application in DDR
+def load_app_ddr(u_boot_console, tftp_addr, app):
+    output = u_boot_console.run_command('tftpboot %x %s' % (tftp_addr, app))
+    assert 'TIMEOUT' not in output
+    assert 'Bytes transferred = ' in output
+
+    # Load elf
+    u_boot_console.run_command('bootelf -p %x' % tftp_addr)
+    assert ret_code(u_boot_console).endswith('0')
+
+# Disable cpus
+def disable_cpus(u_boot_console, cpu_nums):
+    for num in cpu_nums:
+        u_boot_console.run_command(f'cpu {num} disable')
+
+# Load apps on RPU cores
+def rpu_apps_load(u_boot_console, rpu_mode):
+    apps, procs, cpu_nums, addrs, outputs, tftp_addrs = get_rpu_apps_env(
+        u_boot_console)
+    test_net.test_net_dhcp(u_boot_console)
+    if not test_net.net_set_up:
+        test_net.test_net_setup_static(u_boot_console)
+
+    try:
+        assert tcminit(u_boot_console, rpu_mode).endswith('0')
+
+        for i in range(len(apps)):
+            if rpu_mode == 'lockstep' and procs[i] != 'rpu0':
+                continue
+
+            load_app_ddr(u_boot_console, tftp_addrs[i], apps[i])
+            rel_addr = int(addrs[i] + 0x3C)
+
+            # Release cpu at app load address
+            cpu_num = cpu_nums[i]
+            cmd = 'cpu %d release %x %s' % (cpu_num, rel_addr, rpu_mode)
+            output = u_boot_console.run_command(cmd)
+            exp_op = f'Using TCM jump trampoline for address {hex(rel_addr)}'
+            assert exp_op in output
+            assert f'R5 {rpu_mode} mode' in output
+            u_boot_console.wait_for(outputs[i])
+            assert ret_code(u_boot_console).endswith('0')
+    finally:
+        disable_cpus(u_boot_console, cpu_nums)
+
+ at pytest.mark.buildconfigspec('cmd_zynqmp')
+def test_zynqmp_rpu_app_load_split(u_boot_console):
+    rpu_apps_load(u_boot_console, 'split')
+
+ at pytest.mark.buildconfigspec('cmd_zynqmp')
+def test_zynqmp_rpu_app_load_lockstep(u_boot_console):
+    rpu_apps_load(u_boot_console, 'lockstep')
+
+ at pytest.mark.buildconfigspec('cmd_zynqmp')
+def test_zynqmp_rpu_app_load_negative(u_boot_console):
+    apps, procs, cpu_nums, addrs, outputs, tftp_addrs = get_rpu_apps_env(
+        u_boot_console)
+
+    # Invalid commands
+    u_boot_console.run_command('zynqmp tcminit mode')
+    assert ret_code(u_boot_console).endswith('1')
+
+    rand_str = ''.join(random.choices(string.ascii_lowercase, k=4))
+    u_boot_console.run_command('zynqmp tcminit %s' % rand_str)
+    assert ret_code(u_boot_console).endswith('1')
+
+    rand_num = random.randint(2, 100)
+    u_boot_console.run_command('zynqmp tcminit %d' % rand_num)
+    assert ret_code(u_boot_console).endswith('1')
+
+    test_net.test_net_dhcp(u_boot_console)
+    if not test_net.net_set_up:
+        test_net.test_net_setup_static(u_boot_console)
+
+    try:
+        rpu_mode = 'split'
+        assert tcminit(u_boot_console, rpu_mode).endswith('0')
+
+        for i in range(len(apps)):
+            load_app_ddr(u_boot_console, tftp_addrs[i], apps[i])
+
+            # Run in split mode at different load address
+            rel_addr = int(addrs[i]) + random.randint(200, 1000)
+            cpu_num = cpu_nums[i]
+            cmd = 'cpu %d release %x %s' % (cpu_num, rel_addr, rpu_mode)
+            output = u_boot_console.run_command(cmd)
+            exp_op = f'Using TCM jump trampoline for address {hex(rel_addr)}'
+            assert exp_op in output
+            assert f'R5 {rpu_mode} mode' in output
+            assert not outputs[i] in output
+
+            # Invalid rpu mode
+            rand_str = ''.join(random.choices(string.ascii_lowercase, k=4))
+            cmd = 'cpu %d release %x %s' % (cpu_num, rel_addr, rand_str)
+            output = u_boot_console.run_command(cmd)
+            assert exp_op in output
+            assert f'Unsupported mode' in output
+            assert not ret_code(u_boot_console).endswith('0')
+
+        # Switch to lockstep mode, without disabling CPUs
+        rpu_mode = 'lockstep'
+        u_boot_console.run_command('zynqmp tcminit %s' % rpu_mode)
+        assert not ret_code(u_boot_console).endswith('0')
+
+        # Disable cpus
+        disable_cpus(u_boot_console, cpu_nums)
+
+        # Switch to lockstep mode, after disabling CPUs
+        output = u_boot_console.run_command('zynqmp tcminit %s' % rpu_mode)
+        assert 'Initializing TCM overwrites TCM content' in output
+        assert ret_code(u_boot_console).endswith('0')
+
+        # Run lockstep mode for RPU1
+        for i in range(len(apps)):
+            if procs[i] == 'rpu0':
+                continue
+
+            load_app_ddr(u_boot_console, tftp_addrs[i], apps[i])
+            rel_addr = int(addrs[i] + 0x3C)
+            cpu_num = cpu_nums[i]
+            cmd = 'cpu %d release %x %s' % (cpu_num, rel_addr, rpu_mode)
+            output = u_boot_console.run_command(cmd)
+            exp_op = f'Using TCM jump trampoline for address {hex(rel_addr)}'
+            assert exp_op in output
+            assert f'R5 {rpu_mode} mode' in output
+            assert u_boot_console.p.expect([outputs[i]])
+    finally:
+        disable_cpus(u_boot_console, cpu_nums)
+        # This forces the console object to be shutdown, so any subsequent test
+        # will reset the board back into U-Boot.
+        u_boot_console.drain_console()
+        u_boot_console.cleanup_spawn()
-- 
2.25.1



More information about the U-Boot mailing list