[PATCH v2] boot: add support for button commands

Caleb Connolly caleb.connolly at linaro.org
Tue Jan 9 12:51:09 CET 2024


With the relatively new button API in U-Boot, it's now much easier to
model the common usecase of mapping arbitrary actions to different
buttons during boot - for example entering fastboot mode, setting some
additional kernel cmdline arguments, or booting with a custom recovery
ramdisk, to name a few.

Historically, this functionality has been implemented in board code,
making it fixed for a given U-Boot binary and requiring the code be
duplicated and modified for every board.

Implement a generic abstraction to run an arbitrary command during boot
when a specific button is pressed. The button -> command mapping is
configured via environment variables with the following format:

  button_cmd_N_name=<button label>
  button_cmd_N=<command to run>

Where N is the mapping number starting from 0. For example:

  button_cmd_0_name=vol_down
  button_cmd_0=fastboot usb 0

This will cause the device to enter fastboot mode if volume down is held
during boot.

After we enter the cli loop the button commands are no longer valid,
this allows the buttons to additionally be used for navigating a boot
menu.

Tested-by: Svyatoslav Ryhel <clamor95 at gmail.com> # Tegra30
Signed-off-by: Caleb Connolly <caleb.connolly at linaro.org>
---
Changes since v1:
 * make get_button_cmd() static.
 * use #if IS_ENABLED(CONFIG_BUTTON_CMD) instead of #ifdef
   CONFIG_BUTTON_CMD.
 * Kconfig fixes
---
 boot/Kconfig              | 15 +++++++
 common/Makefile           |  1 +
 common/button_cmd.c       | 83 +++++++++++++++++++++++++++++++++++++++
 common/main.c             |  3 ++
 doc/usage/environment.rst |  4 ++
 include/button.h          |  9 +++++
 6 files changed, 115 insertions(+)
 create mode 100644 common/button_cmd.c

diff --git a/boot/Kconfig b/boot/Kconfig
index fbc49c5bca47..882835731ea9 100644
--- a/boot/Kconfig
+++ b/boot/Kconfig
@@ -20,6 +20,21 @@ config TIMESTAMP
 	  loaded that does not, the message 'Wrong FIT format: no timestamp'
 	  is shown.
 
+config BUTTON_CMD
+	bool "Support for running a command if a button is held during boot"
+	depends on CMDLINE
+	depends on BUTTON
+	help
+	  For many embedded devices it's useful to enter a special flashing mode
+	  such as fastboot mode when a button is held during boot. This option
+	  allows arbitrary commands to be assigned to specific buttons. These will
+	  be run after "preboot" if the button is held. Configuration is done via
+	  the environment variables "button_cmd_N_name" and "button_cmd_N" where n is
+	  the button number (starting from 0). e.g:
+
+	    "button_cmd_0_name=vol_down"
+	    "button_cmd_0=fastboot usb 0"
+
 menuconfig FIT
 	bool "Flattened Image Tree (FIT)"
 	select HASH
diff --git a/common/Makefile b/common/Makefile
index cdeadf72026c..53105a6ce12a 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -10,6 +10,7 @@ obj-y += main.o
 obj-y += exports.o
 obj-$(CONFIG_HUSH_PARSER) += cli_hush.o
 obj-$(CONFIG_AUTOBOOT) += autoboot.o
+obj-$(CONFIG_BUTTON_CMD) += button_cmd.o
 
 # # boards
 obj-y += board_f.o
diff --git a/common/button_cmd.c b/common/button_cmd.c
new file mode 100644
index 000000000000..b6a8434d6f29
--- /dev/null
+++ b/common/button_cmd.c
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2023 Linaro Ltd.
+ *   Author: Caleb Connolly <caleb.connolly at linaro.org>
+ */
+
+#include <button.h>
+#include <command.h>
+#include <env.h>
+#include <log.h>
+#include <vsprintf.h>
+
+/* Some sane limit "just in case" */
+#define MAX_BTN_CMDS 32
+
+struct button_cmd {
+	bool pressed;
+	const char *btn_name;
+	const char *cmd;
+};
+
+/*
+ * Button commands are set via environment variables, e.g.:
+ * button_cmd_N_name=Volume Up
+ * button_cmd_N=fastboot usb 0
+ *
+ * This function will retrieve the command for the given button N
+ * and populate the cmd struct with the command string and pressed
+ * state of the button.
+ *
+ * Returns 1 if a command was found, 0 otherwise.
+ */
+static int get_button_cmd(int n, struct button_cmd *cmd)
+{
+	const char *cmd_str;
+	struct udevice *btn;
+	char buf[24];
+
+	snprintf(buf, sizeof(buf), "button_cmd_%d_name", n);
+	cmd->btn_name = env_get(buf);
+	if (!cmd->btn_name)
+		return 0;
+
+	button_get_by_label(cmd->btn_name, &btn);
+	if (!btn) {
+		log_err("No button labelled '%s'\n", cmd->btn_name);
+		return 0;
+	}
+
+	cmd->pressed = button_get_state(btn) == BUTTON_ON;
+	/* If the button isn't pressed then cmd->cmd will be unused so don't waste
+	 * cycles reading it
+	 */
+	if (!cmd->pressed)
+		return 1;
+
+	snprintf(buf, sizeof(buf), "button_cmd_%d", n);
+	cmd_str = env_get(buf);
+	if (!cmd_str) {
+		log_err("No command set for button '%s'\n", cmd->btn_name);
+		return 0;
+	}
+
+	cmd->cmd = cmd_str;
+
+	return 1;
+}
+
+void process_button_cmds(void)
+{
+	struct button_cmd cmd = {0};
+	int i = 0;
+
+	while (get_button_cmd(i++, &cmd) && i < MAX_BTN_CMDS) {
+		if (!cmd.pressed)
+			continue;
+
+		log_info("BTN '%s'> %s\n", cmd.btn_name, cmd.cmd);
+		run_command(cmd.cmd, CMD_FLAG_ENV);
+		/* Don't run commands for multiple buttons */
+		return;
+	}
+}
diff --git a/common/main.c b/common/main.c
index 7c70de2e59a8..717e8b7e8bd2 100644
--- a/common/main.c
+++ b/common/main.c
@@ -8,6 +8,7 @@
 
 #include <common.h>
 #include <autoboot.h>
+#include <button.h>
 #include <bootstage.h>
 #include <cli.h>
 #include <command.h>
@@ -61,6 +62,8 @@ void main_loop(void)
 			efi_launch_capsules();
 	}
 
+	process_button_cmds();
+
 	s = bootdelay_process();
 	if (cli_process_fdt(&s))
 		cli_secure_boot_cmd(s);
diff --git a/doc/usage/environment.rst b/doc/usage/environment.rst
index c57b717caaf3..ce5a9627f025 100644
--- a/doc/usage/environment.rst
+++ b/doc/usage/environment.rst
@@ -190,6 +190,10 @@ bootm_size
 bootstopkeysha256, bootdelaykey, bootstopkey
     See README.autoboot
 
+button_cmd_0, button_cmd_0_name ... button_cmd_N, button_cmd_N_name
+    Used to map commands to run when a button is held during boot.
+    See CONFIG_BUTTON_CMD.
+
 updatefile
     Location of the software update file on a TFTP server, used
     by the automatic software update feature. Please refer to
diff --git a/include/button.h b/include/button.h
index 207f4a0f4dbd..8d38e521324d 100644
--- a/include/button.h
+++ b/include/button.h
@@ -74,4 +74,13 @@ enum button_state_t button_get_state(struct udevice *dev);
  */
 int button_get_code(struct udevice *dev);
 
+#if IS_ENABLED(CONFIG_BUTTON_CMD)
+/* Process button command mappings specified in the environment,
+ * running the commands for buttons which are pressed
+ */
+void process_button_cmds(void);
+#else
+static inline void process_button_cmds(void) {}
+#endif /* CONFIG_BUTTON_CMD */
+
 #endif
-- 
2.42.1



More information about the U-Boot mailing list