[PATCH 2/2] board: visionfive2: configure PHY pad drive strength

[Leo Liang]

On Sun, Jan 28, 2024 at 08:22:48PM +0100, Lukasz Tekieli wrote:
> Configure the pad drive strength register for both PHYs.
> The values correspond to what can be found in the Linux DTS
> for VisionFive2 v1.3b.
> 
> Pad drive strength configuration is required for the phy0 to work correctly
> with 100Mbit links.
> 
> Signed-off-by: Lukasz Tekieli <tekieli.lukasz at gmail.com>
> ---
>  board/starfive/visionfive2/spl.c | 8 ++++++++
>  1 file changed, 8 insertions(+)

Reviewed-by: Leo Yu-Chi Liang <ycliang at andestech.com>