[PATCH 00/10] ECC Series

[Santhosh Kumar K]

This series is to:
1. Enable ECC priming with BIST engine (Patch 1)
2. Add a function to store base address and size of RAM's banks
   in a 64 bit device private data (Patch 2)
3. Setup the ECC region start and range (Patch 3)
4. Enable ECC 1 bit error, 2 bit error and multiple bit
   error interrupts (Patch 4)
5. Add CONFIG_K3_INLINE_ECC (Patch 5)
6. Pull the redundant DDR functions to a common location (Patch 6)
7. Remove redundant DDR functions (Patch 7, 8)
8. Fixup DDR size when ECC is enabled (Patch 9)
9. Add ss_cfg reg entry (Patch 10)

Tested on AM62X and AM62A, results:
AM62X: https://gist.github.com/santhosh21/c5f07cd921bd2b12d12385f22c698ee6
AM62A: https://gist.github.com/santhosh21/e5fa684d890d65b4034346435213ec8b

Things to look in the test log:
1. Time-taken for priming
2. Fixed up DDR size (RAM size =- ECC reserved space).

Thanks and Regards,
Santhosh.

Georgi Vlaev (1):
  ram: k3-ddrss: Use the DDR controller BIST engine for ECC priming

Neha Malcom Francis (1):
  drivers: ram: Kconfig: Add CONFIG_K3_INLINE_ECC

Santhosh Kumar K (8):
  ram: k3-ddrss: Add k3_ddrss_ddr_bank_base_size_calc() to solve
    'calculations restricted to 32 bits' issue
  ram: k3-ddrss: Setup ECC region start and range
  ram: k3-ddrss: Enable ECC interrupts
  board: ti: common: k3-ddr-init: Pull redundant DDR functions to a
    common location
  board: ti: am64x: evm: Remove redundant DDR functions
  board: ti: am62x: evm: Remove redundant DDR functions
  board: ti: am62ax: evm: Fixup DDR size when ECC is enabled
  arm: dts: k3-am62a-ddr: Add ss_cfg reg entry

 arch/arm/dts/k3-am62a-ddr.dtsi  |   7 +-
 board/ti/am62ax/evm.c           |  16 +--
 board/ti/am62x/evm.c            |  61 +---------
 board/ti/am64x/evm.c            |  71 +----------
 board/ti/common/k3-ddr-init.c   |  75 ++++++++++++
 board/ti/common/k3-ddr-init.h   |  15 +++
 drivers/ram/Kconfig             |  11 ++
 drivers/ram/k3-ddrss/k3-ddrss.c | 209 +++++++++++++++++++++++++++-----
 8 files changed, 307 insertions(+), 158 deletions(-)
 create mode 100644 board/ti/common/k3-ddr-init.c
 create mode 100644 board/ti/common/k3-ddr-init.h

-- 
2.34.1