[PATCH 1/2] Add support for phyGATE-Tauri-L-iMX8MM
Yannic Moog
y.moog at phytec.de
Wed Jan 10 13:57:41 CET 2024
phyGATE-Tauri-L-iMX8MM is a Gateway based on the phycore-imx8mm SoM.
As a result, all the board code of the phycore-imx8mm is used.
Device tree synced with kernel v6.7.
Signed-off-by: Yannic Moog <y.moog at phytec.de>
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/imx8mm-phygate-tauri-l-u-boot.dtsi | 70 ++++
arch/arm/dts/imx8mm-phygate-tauri-l.dts | 489 ++++++++++++++++++++++++
board/phytec/phycore_imx8mm/MAINTAINERS | 3 +
configs/imx8mm-phygate-tauri-l_defconfig | 117 ++++++
5 files changed, 680 insertions(+)
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 773c2546131..d456a524b36 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -1076,6 +1076,7 @@ dtb-$(CONFIG_ARCH_IMX8M) += \
imx8mm-mx8menlo.dtb \
imx8mm-phg.dtb \
imx8mm-phyboard-polis-rdk.dtb \
+ imx8mm-phygate-tauri-l.dtb \
imx8mm-venice.dtb \
imx8mm-venice-gw71xx-0x.dtb \
imx8mm-venice-gw72xx-0x.dtb \
diff --git a/arch/arm/dts/imx8mm-phygate-tauri-l-u-boot.dtsi b/arch/arm/dts/imx8mm-phygate-tauri-l-u-boot.dtsi
new file mode 100644
index 00000000000..f59f119374f
--- /dev/null
+++ b/arch/arm/dts/imx8mm-phygate-tauri-l-u-boot.dtsi
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2024 PHYTEC Messtechnik GmbH
+ */
+
+#include "imx8mm-u-boot.dtsi"
+
+/ {
+ wdt-reboot {
+ compatible = "wdt-reboot";
+ wdt = <&wdog1>;
+ bootph-pre-ram;
+ };
+};
+
+&pinctrl_uart3 {
+ bootph-pre-ram;
+};
+
+&pinctrl_usdhc2_gpio {
+ bootph-pre-ram;
+};
+
+&pinctrl_usdhc2 {
+ bootph-pre-ram;
+};
+
+&pinctrl_usdhc3 {
+ bootph-pre-ram;
+};
+
+&pinctrl_wdog {
+ bootph-pre-ram;
+};
+
+&gpio1 {
+ bootph-pre-ram;
+};
+
+&gpio2 {
+ bootph-pre-ram;
+};
+
+&gpio3 {
+ bootph-pre-ram;
+};
+
+&gpio4 {
+ bootph-pre-ram;
+};
+
+&gpio5 {
+ bootph-pre-ram;
+};
+
+&uart3 {
+ bootph-pre-ram;
+};
+
+&usdhc2 {
+ bootph-pre-ram;
+};
+
+&usdhc3 {
+ bootph-pre-ram;
+};
+
+&wdog1 {
+ bootph-pre-ram;
+};
diff --git a/arch/arm/dts/imx8mm-phygate-tauri-l.dts b/arch/arm/dts/imx8mm-phygate-tauri-l.dts
new file mode 100644
index 00000000000..968f475b9a9
--- /dev/null
+++ b/arch/arm/dts/imx8mm-phygate-tauri-l.dts
@@ -0,0 +1,489 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+#include "imx8mm-phycore-som.dtsi"
+
+/ {
+ model = "PHYTEC phyGATE-Tauri-L-iMX8MM";
+ compatible = "phytec,imx8mm-phygate-tauri-l",
+ "phytec,imx8mm-phycore-som", "fsl,imx8mm";
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ can_osc_40m: clock-can {
+ compatible = "fixed-clock";
+ clock-frequency = <40000000>;
+ clock-output-names = "can_osc_40m";
+ #clock-cells = <0>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpiokeys>;
+
+ key {
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ label = "KEY-A";
+ linux,code = <KEY_A>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds>;
+
+ led-1 {
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "none";
+ };
+
+ led-2 {
+ color = <LED_COLOR_ID_YELLOW>;
+ gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "none";
+ };
+ };
+
+ usdhc1_pwrseq: pwr-seq {
+ compatible = "mmc-pwrseq-simple";
+ post-power-on-delay-ms = <100>;
+ power-off-delay-us = <60>;
+ reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+ };
+
+ reg_usb_hub_vbus: regulator-hub-otg1 {
+ compatible = "regulator-fixed";
+ gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbhubpwr>;
+ regulator-name = "usb_hub_vbus";
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ };
+
+ reg_usb_otg1_vbus: regulator-usb-otg1 {
+ compatible = "regulator-fixed";
+ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1pwr>;
+ regulator-name = "usb_otg1_vbus";
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microvolt = <5000000>;
+ };
+
+ reg_usdhc2_vmmc: regulator-usdhc2 {
+ compatible = "regulator-fixed";
+ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ off-on-delay-us = <20000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microvolt = <3300000>;
+ regulator-name = "VSD_3V3";
+ };
+};
+
+&ecspi1 {
+ cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>,
+ <&gpio5 13 GPIO_ACTIVE_LOW>,
+ <&gpio5 2 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ /* CAN MCP251XFD */
+ can0: can at 0 {
+ compatible = "microchip,mcp251xfd";
+ reg = <0>;
+ clocks = <&can_osc_40m>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-parent = <&gpio1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can_int>;
+ spi-max-frequency = <10000000>;
+ };
+
+ tpm: tpm at 1 {
+ compatible = "tcg,tpm_tis-spi";
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-parent = <&gpio2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tpm>;
+ reg = <1>;
+ spi-max-frequency = <38000000>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ pinctrl-1 = <&pinctrl_i2c2_gpio>;
+ scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+
+ temp_sense0: temperature-sensor at 49 {
+ compatible = "ti,tmp102";
+ reg = <0x49>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tempsense>;
+ #thermal-sensor-cells = <1>;
+ };
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ pinctrl-1 = <&pinctrl_i2c3_gpio>;
+ scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+};
+
+&i2c4 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ pinctrl-1 = <&pinctrl_i2c4_gpio>;
+ scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+};
+
+/* PCIe */
+&pcie0 {
+ assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+ <&clk IMX8MM_CLK_PCIE1_PHY>,
+ <&clk IMX8MM_CLK_PCIE1_CTRL>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+ <&clk IMX8MM_SYS_PLL2_100M>,
+ <&clk IMX8MM_SYS_PLL2_250M>;
+ assigned-clock-rates = <10000000>, <100000000>, <250000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "okay";
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+ status = "okay";
+};
+
+/* RTC */
+&rv3028 {
+ trickle-resistor-ohms = <3000>;
+};
+
+&uart1 {
+ assigned-clocks = <&clk IMX8MM_CLK_UART1>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+/* UART2 - RS232 */
+&uart2 {
+ assigned-clocks = <&clk IMX8MM_CLK_UART2>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+/* UART - console */
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+/* USB */
+&usbotg1 {
+ adp-disable;
+ dr_mode = "otg";
+ over-current-active-low;
+ samsung,picophy-pre-emp-curr-control = <3>;
+ samsung,picophy-dc-vol-level-adjust = <7>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1>;
+ srp-disable;
+ vbus-supply = <®_usb_otg1_vbus>;
+ status = "okay";
+};
+
+&usbotg2 {
+ disable-over-current;
+ dr_mode = "host";
+ samsung,picophy-pre-emp-curr-control = <3>;
+ samsung,picophy-dc-vol-level-adjust = <7>;
+ vbus-supply = <®_usb_hub_vbus>;
+ status = "okay";
+};
+
+/* SD-Card */
+&usdhc2 {
+ assigned-clocks = <&clk IMX8MM_CLK_USDHC2>;
+ assigned-clock-rates = <200000000>;
+ bus-width = <4>;
+ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ disable-wp;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ vmmc-supply = <®_usdhc2_vmmc>;
+ vqmmc-supply = <®_nvcc_sd2>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_can_int: can-intgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x00
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82
+ MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82
+ MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82
+ >;
+ };
+
+ pinctrl_ecspi1_cs: ecspi1csgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x00
+ MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x00
+ MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x00
+ >;
+ };
+
+ pinctrl_gpiokeys: keygrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x00
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c2
+ MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c2
+ >;
+ };
+
+ pinctrl_i2c2_gpio: i2c2gpiogrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17 0x1e0
+ MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16 0x1e0
+ >;
+ };
+
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c2
+ MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c2
+ >;
+ };
+
+ pinctrl_i2c3_gpio: i2c3gpiogrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19 0x1e0
+ MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18 0x1e0
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c2
+ MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c2
+ >;
+ };
+
+ pinctrl_i2c4_gpio: i2c4gpiogrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0x1e0
+ MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20 0x1e0
+ >;
+ };
+
+ pinctrl_leds: leds1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI3_RXD_GPIO4_IO30 0x00
+ MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x00
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ /* COEX2 */
+ MX8MM_IOMUXC_SAI5_RXD1_GPIO3_IO22 0x00
+ /* COEX1 */
+ MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12 0x12
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT 0x40
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SPDIF_TX_PWM3_OUT 0x40
+ >;
+ };
+
+ pinctrl_pwm4: pwm4grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO15_PWM4_OUT 0x40
+ >;
+ };
+
+ pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x40
+ >;
+ };
+
+ pinctrl_tempsense: tempsensegrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SAI3_TXFS_GPIO4_IO31 0x00
+ >;
+ };
+
+ pinctrl_tpm: tpmgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11 0x140
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x00
+ MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x00
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x00
+ MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x00
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140
+ MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140
+ >;
+ };
+
+ pinctrl_usbhubpwr: usbhubpwrgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x00
+ >;
+ };
+
+ pinctrl_usbotg1pwr: usbotg1pwrgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x00
+ >;
+ };
+
+ pinctrl_usbotg1: usbotg1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x80
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x182
+ MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0xc6
+ MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc6
+ MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc6
+ MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc6
+ MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc6
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x40
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x192
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d2
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d2
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d2
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d2
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d2
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2100mhzgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2200mhzgrp {
+ fsl,pins = <
+ MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
+ MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
+ MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
+ MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
+ MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
+ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
+ >;
+ };
+};
diff --git a/board/phytec/phycore_imx8mm/MAINTAINERS b/board/phytec/phycore_imx8mm/MAINTAINERS
index acffda61c04..05d48ba2472 100644
--- a/board/phytec/phycore_imx8mm/MAINTAINERS
+++ b/board/phytec/phycore_imx8mm/MAINTAINERS
@@ -5,6 +5,9 @@ S: Maintained
F: arch/arm/dts/imx8mm-phyboard-polis-rdk.dts
F: arch/arm/dts/imx8mm-phycore-som.dtsi
F: arch/arm/dts/imx8mm-phyboard-polis-rdk-u-boot.dtsi
+F: arch/arm/dts/imx8mm-phygate-tauri-l.dts
+F: arch/arm/dts/imx8mm-phygate-tauri-l-u-boot.dtsi
F: board/phytec/phycore_imx8mm/
+F: configs/imx8mm-phygate-tauri-l_defconfig
F: configs/phycore-imx8mm_defconfig
F: include/configs/phycore_imx8mm.h
diff --git a/configs/imx8mm-phygate-tauri-l_defconfig b/configs/imx8mm-phygate-tauri-l_defconfig
new file mode 100644
index 00000000000..f1ca99fab0a
--- /dev/null
+++ b/configs/imx8mm-phygate-tauri-l_defconfig
@@ -0,0 +1,117 @@
+CONFIG_ARM=y
+CONFIG_ARCH_IMX8M=y
+CONFIG_TEXT_BASE=0x40200000
+CONFIG_SYS_MALLOC_LEN=0x2000000
+CONFIG_SPL_GPIO=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SF_DEFAULT_SPEED=80000000
+CONFIG_ENV_SIZE=0x10000
+CONFIG_ENV_OFFSET=0x3C0000
+CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="imx8mm-phygate-tauri-l"
+CONFIG_SPL_TEXT_BASE=0x7E1000
+CONFIG_TARGET_PHYCORE_IMX8MM=y
+CONFIG_SYS_MONITOR_LEN=524288
+CONFIG_SPL_MMC=y
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SPL_STACK=0x920000
+CONFIG_SPL=y
+CONFIG_ENV_OFFSET_REDUND=0x3E0000
+CONFIG_SYS_LOAD_ADDR=0x40480000
+CONFIG_LTO=y
+CONFIG_FIT=y
+CONFIG_FIT_EXTERNAL_OFFSET=0x3000
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadimage; then run mmcboot; else run netboot; fi; fi;"
+CONFIG_DEFAULT_FDT_FILE="oftree"
+CONFIG_SYS_CBSIZE=2048
+CONFIG_SYS_PBSIZE=2074
+CONFIG_BOARD_LATE_INIT=y
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x910000
+CONFIG_SPL_BSS_MAX_SIZE=0x2000
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_SYS_MALLOC=y
+CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
+CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
+CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
+CONFIG_SPL_I2C=y
+CONFIG_SPL_POWER=y
+CONFIG_SPL_WATCHDOG=y
+CONFIG_HUSH_PARSER=y
+CONFIG_SYS_PROMPT="u-boot=> "
+CONFIG_SYS_MAXARGS=64
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+# CONFIG_CMD_CRC32 is not set
+CONFIG_CMD_EEPROM=y
+CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
+CONFIG_SYS_EEPROM_SIZE=4096
+CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
+CONFIG_CMD_CLK=y
+CONFIG_CMD_FUSE=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF_TEST=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SYS_MMC_ENV_DEV=2
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_SPL_DM=y
+CONFIG_SPL_CLK_COMPOSITE_CCF=y
+CONFIG_CLK_COMPOSITE_CCF=y
+CONFIG_SPL_CLK_IMX8MM=y
+CONFIG_CLK_IMX8MM=y
+CONFIG_MXC_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_MISC=y
+CONFIG_I2C_EEPROM=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x51
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS400_ES_SUPPORT=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_FSL_USDHC=y
+CONFIG_SF_DEFAULT_BUS=3
+CONFIG_PHYLIB=y
+CONFIG_PHY_GIGE=y
+CONFIG_FEC_MXC=y
+CONFIG_MII=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_PINCTRL_IMX8M=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_IMX8M_POWER_DOMAIN=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_SERIAL=y
+CONFIG_MXC_UART=y
+CONFIG_SYSRESET=y
+CONFIG_SPL_SYSRESET=y
+CONFIG_SYSRESET_PSCI=y
+CONFIG_SYSRESET_WATCHDOG=y
+CONFIG_DM_THERMAL=y
+CONFIG_IMX_WATCHDOG=y
--
2.34.1
More information about the U-Boot
mailing list