[PATCH v4 0/6] rpi5: initial support

[Ivan T. Ivanov]

Hi,

On 01-12 14:10, Jens Maus wrote:
> 
> Hi Ivan,
> 
> first of all, thanks for the updated rpi5 patchset. However, I am unable to reproduce that it is actually working as you suggest. Could you please quickly elaborate on your test environment and the test config.txt for the RaspberryPi5? Here I have compiled U-Boot 2024.01 with your patches applied and using the „rpi_arm64_defconfig“, put the u-boot.bin file on the sd card and then added „kernel=u-boot.bin“ to the config.txt file. The environment I am using is a buildroot-based system which boots nicely with the default RaspberryPi boot loader and a RaspberryPi5. However, as soon as I replace the „kernel=Image“ line with „kernel=u-boot.bin“ the system stalls and there is no HDMI output (nor any console output) with the u-boot 2024.01 version and your patches applied.
> 

Yes, I am using rpi_arm64_defconfig for building the U-Boot.
And as I wrote in the cover letter I am using openSUSE Tumbleweed
image[1], [2]. Once you copy image to uSD card mount EFI uSD
partition and copy new u-boot.bin over existing one. That
it is. Just make sure you clearly sync, unmount the card.
You can find config.txt file in the EFI partition.

Regards,
Ivan

[1] https://en.opensuse.org/HCL:Raspberry_Pi4
[2] http://download.opensuse.org/ports/aarch64/tumbleweed/appliances/openSUSE-Tumbleweed-ARM-XFCE-raspberrypi.aarch64.raw.xz