[PATCH 3/4] board: phytec: phycore_am62x: Move earlycon into own variable

[Daniel Schultz]

By moving the earlycon definition into a dedicated variable, it's
easier to change these values in case the kernel should print on
a different serial interface.

Signed-off-by: Daniel Schultz <d.schultz at phytec.de>
---
 board/phytec/phycore_am62x/phycore_am62x.env | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/board/phytec/phycore_am62x/phycore_am62x.env b/board/phytec/phycore_am62x/phycore_am62x.env
index 42db26a5990..2d6475d408f 100644
--- a/board/phytec/phycore_am62x/phycore_am62x.env
+++ b/board/phytec/phycore_am62x/phycore_am62x.env
@@ -13,7 +13,8 @@ mmcdev=1
 mmcroot=2
 mmcpart=1
 console=ttyS2,115200n8
-mmcargs=setenv bootargs console=${console} earlycon=ns16550a,mmio32,0x02800000
+earlycon=ns16550a,mmio32,0x02800000
+mmcargs=setenv bootargs console=${console} earlycon=${earlycon}
 	root=/dev/mmcblk${mmcdev}p${mmcroot} rootwait rw
 loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} Image
 loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdtaddr} ${fdtfile}
-- 
2.25.1