July 2024 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Mon Jul 1 02:23:00 CEST 2024
Ending: Sat Jul 13 17:16:03 CEST 2024
Messages: 935

• [PATCH] ext4: Improve feature checking   Sean Anderson
  • [PATCH] ext4: Improve feature checking   Sean Anderson
• [PATCH] zlib: Fix big performance regression   Tom Rini
  • [PATCH] zlib: Fix big performance regression   Tom Rini
    • [PATCH] zlib: Fix big performance regression   Christophe Leroy
• [NEXT] Pull request efi-2024-10-rc1   Tom Rini
• [PATCH 0/3] Fix findfdt for j722s and am62p   Manorit Chawdhry
• [PATCH 1/3] include: env: ti: mmc: Change name_fdt usage to fdtfile   Manorit Chawdhry
• [PATCH v2 0/4] Fix fdtfile for j722s and am62p   Manorit Chawdhry
  • [PATCH v2 1/4] include: env: ti: mmc: Change name_fdt usage to fdtfile   Manorit Chawdhry
  • [PATCH v2 2/4] board: ti: am62p|j722s: Add ti_set_fdt_env for fdtfile   Manorit Chawdhry
  • [PATCH v2 3/4] configs: am62p|j722s_a53: Add CONFIG_BOARD_LATE_INIT   Manorit Chawdhry
  • [PATCH v2 4/4] include: env: ti_common: Remove findfdt   Manorit Chawdhry
  • [PATCH v2 0/4] Fix fdtfile for j722s and am62p   Nishanth Menon
    • [PATCH v2 0/4] Fix fdtfile for j722s and am62p   Manorit Chawdhry
      • [PATCH v2 0/4] Fix fdtfile for j722s and am62p   Manorit Chawdhry
• [PATCH 1/4] configs: phycore_am62x_a53: Add more commands   Daniel Schultz
  • [PATCH 2/4] configs: phycore_am64x_a53: Add more commands   Daniel Schultz
  • [PATCH 3/4] board: phytec: phycore_am62x: Move earlycon into own variable   Daniel Schultz
  • [PATCH 4/4] board: phytec: phycore_am64x: Move earlycon into own variable   Daniel Schultz
  • [PATCH 1/4] configs: phycore_am62x_a53: Add more commands   Wadim Egorov
• [PATCH 1/1] rtc: fix the description of the Goldfish RTC driver   Heinrich Schuchardt
• Aw: uboot 2024.07 regression   Sébastien Szymanski
  • Aw: uboot 2024.07 regression   Frank Wunderlich
  • Aw: Re: uboot 2024.07 regression   Frank Wunderlich
• [PATCH v4 1/3] drivers: bootcount: Add support for ANY filesystem   Quentin Schulz
• [PATCH v4 3/3] drivers: bootcount: Fix typo in documentation   Quentin Schulz
• [PATCH] spl: fit: List DTOs applied by SPL in U-Boot control DT   Quentin Schulz
  • [PATCH] spl: fit: List DTOs applied by SPL in U-Boot control DT   Marek Vasut
    • [PATCH] spl: fit: List DTOs applied by SPL in U-Boot control DT   Quentin Schulz
• [GIT PULL] Please pull u-boot-amlogic-next-20240404   Neil Armstrong
  • [GIT PULL] Please pull u-boot-amlogic-next-20240404   Tom Rini
• [PATCH 4/7] mtd: spinand: preparation for ecc engine adding   Miquel Raynal
• [PATCH V3 0/4] Low Power Mode: Pakage TIFS Stub on BeaglePlay   Sebin Francis
  • [PATCH V3 0/4] Low Power Mode: Pakage TIFS Stub on BeaglePlay   Nishanth Menon
    • [PATCH V3 0/4] Low Power Mode: Pakage TIFS Stub on BeaglePlay   Sebin Francis
      • [PATCH V3 0/4] Low Power Mode: Pakage TIFS Stub on BeaglePlay   Nishanth Menon
• [PATCH v4 00/14] Introduce the lwIP network stack   Jerome Forissier
  • [PATCH v4 00/14] Introduce the lwIP network stack   Tim Harvey
• [PATCH v5 4/6] configs: am62x_evm_*: Enable USB and DFU support   Martyn Welch
  • [PATCH v5 4/6] configs: am62x_evm_*: Enable USB and DFU support   Jon Humphreys
  • [PATCH v5 4/6] configs: am62x_evm_*: Enable USB and DFU support   Jon Humphreys
    • [PATCH v5 4/6] configs: am62x_evm_*: Enable USB and DFU support   Jon Humphreys
      • [PATCH v5 4/6] configs: am62x_evm_*: Enable USB and DFU support   Martyn Welch
• [PATCH] imx: hab: Make imx_hab_is_enabled dependent on FIELD_RETURN   Paul Geurts
  • [PATCH] imx: hab: Make imx_hab_is_enabled dependent on FIELD_RETURN   Ye Li
    • [PATCH] imx: hab: Make imx_hab_is_enabled dependent on FIELD_RETURN   Paul Geurts
• [PATCH 1/3] pxe: Add debugging for booting   Simon Glass
• [PATCH v2] spl: fit: List DTOs applied by SPL in U-Boot control DT   Simon Glass
• [PATCH] binman: Update cbfstool   Simon Glass
  • [PATCH] binman: Update cbfstool   Tom Rini
• [PATCH] sandbox: Fix LTO to work with STACKPROTECTOR   Simon Glass
  • [PATCH] sandbox: Fix LTO to work with STACKPROTECTOR   Andrew Goodbody
    • [PATCH] sandbox: Fix LTO to work with STACKPROTECTOR   Simon Glass
• [PATCH] buildman: Add flag to filter out missing binary blobs   Simon Glass
• [PATCH 1/1] defconfig: disable VIDEO_COPY on the sandbox   Simon Glass
• [PATCH 1/3] patman: Fix tests if add_maintainers is set to False   Simon Glass
• [PATCH 2/3] patman: Add Commit-cc as an alias for Patch-cc   Simon Glass
• [PATCH 3/3] patman: Add a tag for when a patch gets added to a series   Simon Glass
• Allow encrypting data in FIT with binman   Simon Glass
• [PATCH] configs: enable setvariable at runtime on sandbox   Simon Glass
• [PATCH 1/1] tools: patman: fix `pip install` with Python 3.12   Simon Glass
  • [PATCH 1/1] tools: patman: fix `pip install` with Python 3.12   Brandon Maier
• [PATCH v4 0/2] k3-am625-beagleplay: Add symlinks for tiboot3 and tispl   Nishanth Menon
• [PATCH 08/12] net/httpd: add httpd common code   Peter Robinson
  • [PATCH 08/12] net/httpd: add httpd common code   Mikhail Kshevetskiy
    • [PATCH 08/12] net/httpd: add httpd common code   Tom Rini
• [PATCH] net/tftp: make tftpput working with servers that do not use OACK   Peter Robinson
• [PATCH v2] tools: patman: fix `pip install` with Python 3.12   Brandon Maier
  • [PATCH v2] tools: patman: fix `pip install` with Python 3.12   Simon Glass
• [ANN] U-Boot v2024.07 released   Tom Rini
• [RFC 1/1] doc: Remove FIT documentation that is elsewhere   Sam Povilus
  • [RFC 1/1] doc: Remove FIT documentation that is elsewhere   Heinrich Schuchardt
• [PATCH 1/1] doc: fix heading level of itest examples   Heinrich Schuchardt
  • [PATCH 1/1] doc: fix heading level of itest examples   Simon Glass
• [PATCH] ARM: socfpga: fix broken function call for arria10   Lothar Rubusch
  • [PATCH] ARM: socfpga: fix broken function call for arria10   Marek Vasut
    • [PATCH] ARM: socfpga: fix broken function call for arria10   Lothar Rubusch
  • [PATCH] ARM: socfpga: fix broken function call for arria10   Lothar Rubusch
    • [PATCH] ARM: socfpga: show broken function call for arria10   Lothar Rubusch
• [RFC v2 0/2] FIT documentation link vs copy   Sam Povilus
  • [RFC v2 1/2] doc: Remove FIT documentation that is elsewhere   Sam Povilus
• [RFC v2 2/2] doc: add missing table of content links   Sam Povilus
  • [RFC v2 2/2] doc: add missing table of content links   Simon Glass
• [PATCH v3 0/4] Fix fdtfile for j722s and am62p   Manorit Chawdhry
  • [PATCH v3 1/4] board: ti: am62p|j722s: Add ti_set_fdt_env for fdtfile   Manorit Chawdhry
  • [PATCH v3 2/4] configs: am62p|j722s_a53: Add CONFIG_BOARD_LATE_INIT   Manorit Chawdhry
  • [PATCH v3 3/4] include: env: ti: mmc: Change name_fdt usage to fdtfile   Manorit Chawdhry
  • [PATCH v3 4/4] include: env: ti_common: Remove findfdt from bootcmd_ti_mmc   Manorit Chawdhry
• [PATCH 0/2] Import environment variables from FIT configuration   lukas.funke-oss at weidmueller.com
  • [PATCH 1/2] env: Add function to import environment variables from FIT conf node   lukas.funke-oss at weidmueller.com
  • [PATCH 2/2] test: fit: Add test to check environment extraction from FIT conf node   lukas.funke-oss at weidmueller.com
  • [PATCH 0/2] Import environment variables from FIT configuration   Quentin Schulz
    • [PATCH 0/2] Import environment variables from FIT configuration   Lukas Funke
      • [PATCH 0/2] Import environment variables from FIT configuration   Quentin Schulz
      • [PATCH 0/2] Import environment variables from FIT configuration   Lukas Funke
      • [PATCH 0/2] Import environment variables from FIT configuration   Quentin Schulz
      • [PATCH 0/2] Import environment variables from FIT configuration   Lukas Funke
• [PATCH] board: phytec: k3: k3_ddrss_patch: Add ddr phy reg count   Dominik Haller
  • [PATCH] board: phytec: k3: k3_ddrss_patch: Add ddr phy reg count   Wadim Egorov
  • [PATCH] board: phytec: k3: k3_ddrss_patch: Add ddr phy reg count   Tom Rini
• [PATCH] gpt: allow spaces in partition list   Mikhail Kshevetskiy
  • [PATCH] gpt: allow spaces in partition list   Simon Glass
    • [PATCH] gpt: allow spaces in partition list   Mikhail Kshevetskiy
  • [PATCH] gpt: allow spaces in partition list   Sam Protsenko
    • [PATCH] gpt: allow spaces in partition list   Sam Protsenko
  • [PATCH] gpt: allow spaces in partition list   Tom Rini
• [PATCH 1/2] clk: imx: Fix wrong flags assignment clk-composite-8m   Michael Trimarchi
  • [PATCH 2/2] clk: imx: Fix wrong flags assignment clk-composite-93   Michael Trimarchi
  • [PATCH 1/2] clk: imx: Fix wrong flags assignment clk-composite-8m   Fabio Estevam
• [PATCH 1/2] spi: soft_spi: fix miso gpio property name   Fabio Estevam
  • [PATCH 1/2] spi: soft_spi: fix miso gpio property name   Mikhail Kshevetskiy
    • [PATCH 1/2] spi: soft_spi: fix miso gpio property name   Mikhail Kshevetskiy
      • [PATCH 1/2] spi: soft_spi: fix miso gpio property name   Fabio Estevam
• [PATCH 1/2] led: Implement software led blinking   Mikhail Kshevetskiy
  • [PATCH 1/2] led: Implement software led blinking   Simon Glass
    • led blinking patches   Mikhail Kshevetskiy
      • [PATCH 1/2] led: Implement software led blinking   Mikhail Kshevetskiy
      • [PATCH 1/2] led: Implement software led blinking   Simon Glass
      • [PATCH 1/2] led: Implement software led blinking   Rasmus Villemoes
      • [PATCH 2/2] led: Add dts property to specify blinking of the led   Mikhail Kshevetskiy
      • [PATCH 2/2] led: Add dts property to specify blinking of the led   Simon Glass
      • [PATCH 2/2] led: Add dts property to specify blinking of the led   Mikhail Kshevetskiy
  • [PATCH 1/2] led: Implement software led blinking   Mikhail Kshevetskiy
    • [PATCH 2/2] led: Add dts property to specify blinking of the led   Mikhail Kshevetskiy
    • [PATCH 1/2] led: Implement software led blinking   Mark Kettenis
      • [PATCH 1/2] led: Implement software led blinking   Mikhail Kshevetskiy
• [PATCH] usb: cdns3: continue probe even when USB PHY device does not exist   Siddharth Vadapalli
  • [PATCH] usb: cdns3: continue probe even when USB PHY device does not exist   Roger Quadros
    • [PATCH] usb: cdns3: continue probe even when USB PHY device does not exist   Siddharth Vadapalli
      • [PATCH] usb: cdns3: continue probe even when USB PHY device does not exist   Roger Quadros
• [PATCH v4 00/10] efi: CapsuleUpdate: support for dynamic UUIDs   Caleb Connolly
  • [PATCH v4 01/10] efi: define struct efi_guid   Caleb Connolly
  • [PATCH v4 02/10] lib: uuid: add UUID v5 support   Caleb Connolly
    • [PATCH v4 02/10] lib: uuid: add UUID v5 support   Heinrich Schuchardt
  • [PATCH v4 03/10] efi: add a helper to generate dynamic UUIDs   Caleb Connolly
  • [PATCH v4 04/10] doc: uefi: document dynamic UUID generation   Caleb Connolly
  • [PATCH v4 05/10] sandbox: switch to dynamic UUIDs   Caleb Connolly
  • [PATCH v4 06/10] lib: uuid: supporting building as part of host tools   Caleb Connolly
  • [PATCH v4 07/10] include: export uuid.h   Caleb Connolly
  • [PATCH v4 08/10] tools: mkeficapsule: use u-boot UUID library   Caleb Connolly
  • [PATCH v4 09/10] tools: mkeficapsule: support generating dynamic GUIDs   Caleb Connolly
  • [PATCH v4 10/10] test: lib/uuid: add unit tests for dynamic UUIDs   Caleb Connolly
• [PATCH] Proposed changes to dynamic UUIDs v3   Caleb Connolly
• [PATCH] mx9: Correct repeatable build error   Simon Glass
  • [PATCH] mx9: Correct repeatable build error   Peng Fan
  • [PATCH] mx9: Correct repeatable build error   Fabio Estevam
• Warnings with xilinx_zynqmp_virt   Simon Glass
  • Warnings with xilinx_zynqmp_virt   Michal Simek
• Please pull u-boot-dm/next   Simon Glass
  • Please pull u-boot-dm/next   Tom Rini
    • Please pull u-boot-dm/next   Simon Glass
• [PATCH v2] binman: Update cbfstool   Simon Glass
  • [PATCH v2] binman: Update cbfstool   Tom Rini
• [PATCH v2] sandbox: Fix LTO to work with STACKPROTECTOR   Andrew Goodbody
• [RESEND PATCH v4 0/3] provide names for emmc hardware partitions   Tim Harvey
  • [RESEND PATCH v4 0/3] provide names for emmc hardware partitions   Dragan Simic
    • [RESEND PATCH v4 0/3] provide names for emmc hardware partitions   Tim Harvey
  • [RESEND PATCH v4 0/3] provide names for emmc hardware partitions   Tom Rini
• [PATCH v4 00/29] Integrate MbedTLS v3.6 LTS with U-Boot   Raymond Mao
  • [PATCH v4 01/29] CI: Exclude MbedTLS subtree for CONFIG checks   Raymond Mao
  • [PATCH v4 02/29] mbedtls: Add script to update MbedTLS subtree   Raymond Mao
    • [PATCH v4 02/29] mbedtls: Add script to update MbedTLS subtree   Tom Rini
      • [PATCH v4 02/29] mbedtls: Add script to update MbedTLS subtree   Jerome Forissier
      • [PATCH v4 02/29] mbedtls: Add script to update MbedTLS subtree   Raymond Mao
      • [PATCH v4 02/29] mbedtls: Add script to update MbedTLS subtree   Raymond Mao
  • [PATCH v4 03/29] mbedtls: add mbedtls into the build system   Raymond Mao
  • [PATCH v4 04/29] lib: Adapt digest header files to MbedTLS   Raymond Mao
    • [PATCH v4 04/29] lib: Adapt digest header files to MbedTLS   Tom Rini
      • [PATCH v4 04/29] lib: Adapt digest header files to MbedTLS   Raymond Mao
      • [PATCH v4 04/29] lib: Adapt digest header files to MbedTLS   Tom Rini
  • [PATCH v4 05/29] md5: Remove md5 non-watchdog API   Raymond Mao
  • [PATCH v4 06/29] sha1: Remove sha1 non-watchdog API   Raymond Mao
    • [PATCH v4 06/29] sha1: Remove sha1 non-watchdog API   Ilias Apalodimas
  • [PATCH v4 07/29] mbedtls: add digest shim layer for MbedTLS   Raymond Mao
  • [PATCH v4 08/29] hash: integrate hash on mbedtls   Raymond Mao
    • [PATCH v4 08/29] hash: integrate hash on mbedtls   Ilias Apalodimas
      • [PATCH v4 08/29] hash: integrate hash on mbedtls   Simon Glass
  • [PATCH v4 09/29] makefile: add mbedtls include directories   Raymond Mao
    • [PATCH v4 09/29] makefile: add mbedtls include directories   Ilias Apalodimas
  • [PATCH v4 10/29] mbedtls/external: support Microsoft Authentication Code   Raymond Mao
  • [PATCH v4 11/29] mbedtls/external: support PKCS9 Authenticate Attributes   Raymond Mao
  • [PATCH v4 12/29] mbedtls/external: support decoding multiple signer's cert   Raymond Mao
  • [PATCH v4 13/29] mbedtls/external: update MbedTLS PKCS7 test suites   Raymond Mao
  • [PATCH v4 14/29] public_key: move common functions to public key helper   Raymond Mao
    • [PATCH v4 14/29] public_key: move common functions to public key helper   Ilias Apalodimas
  • [PATCH v4 15/29] x509: move common functions to x509 helper   Raymond Mao
    • [PATCH v4 15/29] x509: move common functions to x509 helper   Ilias Apalodimas
  • [PATCH v4 16/29] pkcs7: move common functions to PKCS7 helper   Raymond Mao
    • [PATCH v4 16/29] pkcs7: move common functions to PKCS7 helper   Ilias Apalodimas
  • [PATCH v4 17/29] mbedtls: add public key porting layer   Raymond Mao
    • [PATCH v4 17/29] mbedtls: add public key porting layer   Ilias Apalodimas
  • [PATCH v4 18/29] lib/crypto: Adapt public_key header with MbedTLS   Raymond Mao
  • [PATCH v4 19/29] mbedtls: add X509 cert parser porting layer   Raymond Mao
  • [PATCH v4 20/29] lib/crypto: Adapt x509_cert_parser to MbedTLS   Raymond Mao
  • [PATCH v4 21/29] mbedtls: add PKCS7 parser porting layer   Raymond Mao
  • [PATCH v4 22/29] lib/crypto: Adapt PKCS7 parser to MbedTLS   Raymond Mao
  • [PATCH v4 23/29] mbedtls: add MSCode parser porting layer   Raymond Mao
  • [PATCH v4 24/29] lib/crypto: Adapt mscode_parser to MbedTLS   Raymond Mao
  • [PATCH v4 25/29] mbedtls: add RSA helper layer on MbedTLS   Raymond Mao
  • [PATCH v4 26/29] lib/rypto: Adapt rsa_helper to MbedTLS   Raymond Mao
  • [PATCH v4 27/29] asn1_decoder: add build options for ASN1 decoder   Raymond Mao
  • [PATCH v4 28/29] test: Remove ASN1 library test   Raymond Mao
  • [PATCH v4 29/29] configs: enable MbedTLS as default setting   Raymond Mao
    • [PATCH v4 29/29] configs: enable MbedTLS as default setting   Ilias Apalodimas
  • [PATCH v4 00/29] Integrate MbedTLS v3.6 LTS with U-Boot   Tom Rini
• [PATCH v2] ext4: Improve feature checking   Richard Weinberger
• [PATCH 1/2] ext4: Fix integer overflow in ext4fs_read_symlink()   Richard Weinberger
  • [PATCH 2/2] ext4: Fix zalloc()   Richard Weinberger
    • [PATCH 2/2] ext4: Fix zalloc()   Tom Rini
      • [PATCH 2/2] ext4: Fix zalloc()   Richard Weinberger
    • [PATCH 2/2] ext4: Fix zalloc()   Heinrich Schuchardt
      • [PATCH 2/2] ext4: Fix zalloc()   Richard Weinberger
  • [PATCH 1/2] ext4: Fix integer overflow in ext4fs_read_symlink()   Heinrich Schuchardt
    • [PATCH 1/2] ext4: Fix integer overflow in ext4fs_read_symlink()   Richard Weinberger
      • [PATCH 1/2] ext4: Fix integer overflow in ext4fs_read_symlink()   Heinrich Schuchardt
      • [PATCH 1/2] ext4: Fix integer overflow in ext4fs_read_symlink()   Richard Weinberger
      • [PATCH 1/2] ext4: Fix integer overflow in ext4fs_read_symlink()   Tom Rini
• [PATCH v1] mmc: am654_sdhci: Add the quirk to set TESTCD bit   Emanuele Ghidoli
  • [PATCH v1] mmc: am654_sdhci: Add the quirk to set TESTCD bit   Tom Rini
• [PATCH v3 08/19] test: Introduce the concept of a role   Tom Rini
  • [PATCH v3 08/19] test: Introduce the concept of a role   Simon Glass
• [PATCH 2/2] spi: soft_spi: Parse cs-gpios only if num-chipselects is not <0>   Mikhail Kshevetskiy
• [PATCH 0/9] Generalize PHYTEC Overlay Handling   Daniel Schultz
  • [PATCH 1/9] include: env: phytec: Create env file for loading and applying overlays   Daniel Schultz
    • [PATCH 1/9] include: env: phytec: Create env file for loading and applying overlays   Teresa Remmet
  • [PATCH 2/9] phycore-imx8mp: Add overlay and bootenv.txt support   Daniel Schultz
    • [PATCH 2/9] phycore-imx8mp: Add overlay and bootenv.txt support   Teresa Remmet
  • [PATCH 3/9] phycore_imx93: include common overlays.env   Daniel Schultz
  • [PATCH 4/9] board: phytec: renaming of variables according to bootstd doc   Daniel Schultz
  • [PATCH 5/9] include: env: phytec: renaming of variables according to bootstd doc   Daniel Schultz
  • [PATCH 6/9] include: env: phytec: Add common mmc boot for K3 SoMs   Daniel Schultz
  • [PATCH 7/9] include: env: phytec: k3_mmc: Apply overlays during boot   Daniel Schultz
  • [PATCH 8/9] board: phytec: phycore_am62x: Use k3_mmc.env logic   Daniel Schultz
    • [PATCH 8/9] board: phytec: phycore_am62x: Use k3_mmc.env logic   Dhruva Gole
  • [PATCH 9/9] board: phytec: phycore_am64x: Use k3_mmc.env logic   Daniel Schultz
  • [PATCH 0/9] Generalize PHYTEC Overlay Handling   Tom Rini
  • [PATCH 0/9] Generalize PHYTEC Overlay Handling   Wadim Egorov
• Please pull u-boot-dm   Simon Glass
  • Please pull u-boot-dm   Tom Rini
• [PATCH 0/2] Support imx8m composite mux   Michael Trimarchi
  • [PATCH 1/2] clk: clk-mux: Make public the clk_fetch_parent_index   Michael Trimarchi
  • [PATCH 2/2] clk: imx: add mux ops for i.MX8M composite clk   Michael Trimarchi
    • [PATCH 2/2] clk: imx: add mux ops for i.MX8M composite clk   Fabio Estevam
      • [PATCH 2/2] clk: imx: add mux ops for i.MX8M composite clk   Michael Nazzareno Trimarchi
• [PATCH] bootstd: cros: store partition type in an efi_guid_t   Vincent Stehlé
• Please pull u-boot-ubi   Heiko Schocher
  • Please pull u-boot-ubi   Tom Rini
• [PATCH] arm: mediatek: split config into separate options for the board and SoC   Weijie Gao (高惟杰)
  • [PATCH] arm: mediatek: split config into separate options for the board and SoC   Leith Bade
  • [PATCH] arm: mediatek: split config into separate options for the board and SoC   Leith Bade
• [PATCH RFC] gpio: Fix probing of gpio-hogs   Chris Webb
• [PATCH 0/4] fs: ubifs: Fix crash and add safeguards   Alexander Dahl
  • [PATCH 1/4] fs: ubifs: Fix memleak and double free in u-boot wrapper functions   Alexander Dahl
  • [PATCH 2/4] fs: ubifs: Set pointers to NULL after free   Alexander Dahl
  • [PATCH 3/4] fs: ubifs: Make k(z)alloc/kfree symmetric   Alexander Dahl
  • [PATCH 4/4] fs: ubifs: Add volume mounted check   Alexander Dahl
  • [PATCH 0/4] fs: ubifs: Fix crash and add safeguards   Heiko Schocher
    • [PATCH 0/4] fs: ubifs: Fix crash and add safeguards   Alexander Dahl
• [PATCH v2 0/2] Respin bootstd cros patch into a series of two   Vincent Stehlé
  • [PATCH v2 1/2] efi: move guid helper functions to efi.h   Vincent Stehlé
  • [PATCH v2 2/2] bootstd: cros: store partition type in an efi_guid_t   Vincent Stehlé
• [PATCH v1] board: mpfs_icicle: implement board_fdt_blob_setup()   Conor Dooley
• [PATCH] configs: phycore-imx8mp: Disable CONFIG_ANDROID_BOOT_IMAGE   Benjamin Hahn
  • [PATCH] configs: phycore-imx8mp: Disable CONFIG_ANDROID_BOOT_IMAGE   Benjamin Hahn
• [PATCH] clk: Propagate clk_set_rate() if CLK_SET_PARENT_RATE present   Michael Nazzareno Trimarchi
• [PATCH v2 0/2] scripts/Makefile.lib: EFI: Use capsule CRT instead of ESL   Ilias Apalodimas
• [PATCH] msc_sm2s_imx8mp: Adjust the initrd_addr location   Fabio Estevam
  • [PATCH] msc_sm2s_imx8mp: Adjust the initrd_addr location   Tom Rini
    • [PATCH] msc_sm2s_imx8mp: Adjust the initrd_addr location   Fabio Estevam
      • [PATCH] msc_sm2s_imx8mp: Adjust the initrd_addr location   Tom Rini
      • [PATCH] msc_sm2s_imx8mp: Adjust the initrd_addr location   Fabio Estevam
• [PATCH] test/py/tests/test_fpga.py: Correct check for legacy image format support   Tom Rini
  • [PATCH] test/py/tests/test_fpga.py: Correct check for legacy image format support   Simon Glass
  • [PATCH] test/py/tests/test_fpga.py: Correct check for legacy image format support   Tom Rini
• [PATCH] bootstash: Do not provide a default address for all   Tom Rini
  • [PATCH] bootstash: Do not provide a default address for all   Simon Glass
  • [v2] bootstash: Do not provide a default address for all   Tom Rini
    • [v2] bootstash: Do not provide a default address for all   Simon Glass
• [PATCH 1/7] m68k: Implement a default flush_dcache_all   Tom Rini
• (subset) [PATCH 0/3] cmd: avoid duplicate weak functions   Tom Rini
• [PATCH v2 0/7] Add Starfive JH7110 Cadence USB driver   Minda Chen
  • [PATCH v2 1/8] usb: cdns3: Set USB PHY mode in cdns3_core_init_role()   Minda Chen
    • [PATCH v2 1/8] usb: cdns3: Set USB PHY mode in cdns3_core_init_role()   Roger Quadros
      • [PATCH v2 1/8] usb: cdns3: Set USB PHY mode in cdns3_core_init_role()   Minda Chen
  • [PATCH v2 2/8] phy: starfive: Add Starfive JH7110 USB 2.0 PHY driver   Minda Chen
    • [PATCH v2 2/8] phy: starfive: Add Starfive JH7110 USB 2.0 PHY driver   Roger Quadros
  • [PATCH v2 3/8] phy: starfive: Add Starfive JH7110 PCIe 2.0 PHY driver   Minda Chen
    • [PATCH v2 3/8] phy: starfive: Add Starfive JH7110 PCIe 2.0 PHY driver   Roger Quadros
    • [PATCH v2 3/8] phy: starfive: Add Starfive JH7110 PCIe 2.0 PHY driver   Roger Quadros
  • [PATCH v2 4/8] usb: cdns: starfive: Add cdns USB driver   Minda Chen
    • [PATCH v2 4/8] usb: cdns: starfive: Add cdns USB driver   Roger Quadros
  • [PATCH v2 5/8] pinctrl: starfive: Setup USB default disable overcurrent pin   Minda Chen
  • [PATCH v2 6/8] configs: starfive: Add visionfive2 cadence USB configuration   Minda Chen
  • [PATCH v2 7/8] dts: starfive: Add JH7110 Cadence USB dts node   Minda Chen
  • [PATCH v2 8/8] MAINTAINERS: Update Starfive visionfive2 maintain files.   Minda Chen
  • [PATCH v2 0/7] Add Starfive JH7110 Cadence USB driver   Heinrich Schuchardt
    • [PATCH v2 0/7] Add Starfive JH7110 Cadence USB driver   E Shattow
      • 回复: [PATCH v2 0/7] Add Starfive JH7110 Cadence USB driver   Minda Chen
• [RFC PATCH v2 00/48] Make U-Boot memory reservations coherent   Sughosh Ganu
  • [RFC PATCH v2 01/48] malloc: Support testing with realloc()   Sughosh Ganu
  • [RFC PATCH v2 02/48] lib: Handle a special case with str_to_list()   Sughosh Ganu
  • [RFC PATCH v2 03/48] alist: Add support for an allocated pointer list   Sughosh Ganu
  • [RFC PATCH v2 04/48] lib: Convert str_to_list() to use alist   Sughosh Ganu
  • [RFC PATCH v2 05/48] alist: add a couple of helper functions   Sughosh Ganu
  • [RFC PATCH v2 06/48] alist: add a function declaration for alist_expand_by()   Sughosh Ganu
  • [RFC PATCH v2 07/48] lmb: remove the unused lmb_is_reserved() function   Sughosh Ganu
    • [RFC PATCH v2 07/48] lmb: remove the unused lmb_is_reserved() function   Simon Glass
  • [RFC PATCH v2 08/48] lmb: staticize __lmb_alloc_base()   Sughosh Ganu
    • [RFC PATCH v2 08/48] lmb: staticize __lmb_alloc_base()   Simon Glass
  • [RFC PATCH v2 09/48] lmb: remove call to lmb_init()   Sughosh Ganu
    • [RFC PATCH v2 09/48] lmb: remove call to lmb_init()   Simon Glass
  • [RFC PATCH v2 10/48] lmb: remove local instances of the lmb structure variable   Sughosh Ganu
    • [RFC PATCH v2 10/48] lmb: remove local instances of the lmb structure variable   Simon Glass
  • [RFC PATCH v2 11/48] lmb: pass a flag to image_setup_libfdt() for lmb reservations   Sughosh Ganu
    • [RFC PATCH v2 11/48] lmb: pass a flag to image_setup_libfdt() for lmb reservations   Simon Glass
  • [RFC PATCH v2 12/48] lmb: allow for resizing lmb regions   Sughosh Ganu
    • [RFC PATCH v2 12/48] lmb: allow for resizing lmb regions   Simon Glass
  • [RFC PATCH v2 13/48] lmb: make LMB memory map persistent and global   Sughosh Ganu
    • [RFC PATCH v2 13/48] lmb: make LMB memory map persistent and global   Simon Glass
  • [RFC PATCH v2 14/48] lmb: remove config symbols used for lmb region count   Sughosh Ganu
    • [RFC PATCH v2 14/48] lmb: remove config symbols used for lmb region count   Simon Glass
  • [RFC PATCH v2 15/48] test: lmb: remove the test for max regions   Sughosh Ganu
    • [RFC PATCH v2 15/48] test: lmb: remove the test for max regions   Simon Glass
  • [RFC PATCH v2 16/48] lmb: config: add lmb config symbols for SPL   Sughosh Ganu
    • [RFC PATCH v2 16/48] lmb: config: add lmb config symbols for SPL   Tom Rini
      • [RFC PATCH v2 16/48] lmb: config: add lmb config symbols for SPL   Sughosh Ganu
      • [RFC PATCH v2 16/48] lmb: config: add lmb config symbols for SPL   Tom Rini
      • [RFC PATCH v2 16/48] lmb: config: add lmb config symbols for SPL   Simon Glass
  • [RFC PATCH v2 17/48] lmb: allow lmb module to be used in SPL   Sughosh Ganu
    • [RFC PATCH v2 17/48] lmb: allow lmb module to be used in SPL   Simon Glass
  • [RFC PATCH v2 18/48] lmb: introduce a function to add memory to the lmb memory map   Sughosh Ganu
    • [RFC PATCH v2 18/48] lmb: introduce a function to add memory to the lmb memory map   Tom Rini
  • [RFC PATCH v2 19/48] lmb: remove the lmb_init_and_reserve() function   Sughosh Ganu
    • [RFC PATCH v2 19/48] lmb: remove the lmb_init_and_reserve() function   Simon Glass
  • [RFC PATCH v2 20/48] lmb: reserve common areas during board init   Sughosh Ganu
    • [RFC PATCH v2 20/48] lmb: reserve common areas during board init   Simon Glass
  • [RFC PATCH v2 21/48] lmb: remove lmb_init_and_reserve_range() function   Sughosh Ganu
  • [RFC PATCH v2 22/48] lmb: init: initialise the lmb data structures during board init   Sughosh Ganu
  • [RFC PATCH v2 23/48] lmb: use the BIT macro for lmb flags   Sughosh Ganu
  • [RFC PATCH v2 24/48] lmb: add a common implementation of arch_lmb_reserve()   Sughosh Ganu
  • [RFC PATCH v2 25/48] sandbox: spl: enable lmb in SPL   Sughosh Ganu
  • [RFC PATCH v2 26/48] sandbox: iommu: remove lmb allocation in the driver   Sughosh Ganu
  • [RFC PATCH v2 27/48] zynq: lmb: do not add to lmb map before relocation   Sughosh Ganu
  • [RFC PATCH v2 28/48] test: cedit: use allocated address for reading file   Sughosh Ganu
  • [RFC PATCH v2 29/48] test: lmb: tweak the tests for the persistent lmb memory map   Sughosh Ganu
  • [RFC PATCH v2 30/48] test: lmb: run lmb tests only manually   Sughosh Ganu
  • [RFC PATCH v2 31/48] test: lmb: add a separate class of unit tests for lmb   Sughosh Ganu
  • [RFC PATCH v2 32/48] test: lmb: invoke the LMB unit tests from a separate script   Sughosh Ganu
  • [RFC PATCH v2 33/48] test: bdinfo: dump the global LMB memory map   Sughosh Ganu
  • [RFC PATCH v2 34/48] lmb: add versions of the lmb API with flags   Sughosh Ganu
  • [RFC PATCH v2 35/48] lmb: add a flag to allow suppressing memory map change notification   Sughosh Ganu
  • [RFC PATCH v2 36/48] efi: memory: use the lmb API's for allocating and freeing memory   Sughosh Ganu
  • [RFC PATCH v2 37/48] event: add event to notify lmb memory map changes   Sughosh Ganu
  • [RFC PATCH v2 38/48] lib: Kconfig: add a config symbol for getting lmb memory map updates   Sughosh Ganu
    • [RFC PATCH v2 38/48] lib: Kconfig: add a config symbol for getting lmb memory map updates   Tom Rini
  • [RFC PATCH v2 39/48] add a function to check if an address is in RAM memory   Sughosh Ganu
  • [RFC PATCH v2 40/48] lmb: notify of any changes to the LMB memory map   Sughosh Ganu
  • [RFC PATCH v2 41/48] efi_memory: add an event handler to update memory map   Sughosh Ganu
    • [RFC PATCH v2 41/48] efi_memory: add an event handler to update memory map   Simon Glass
  • [RFC PATCH v2 42/48] ti: k3: remove efi_add_known_memory() function definition   Sughosh Ganu
  • [RFC PATCH v2 43/48] layerscape: use the lmb API's to add RAM memory   Sughosh Ganu
  • [RFC PATCH v2 44/48] x86: e820: use the lmb API for adding RAM memory   Sughosh Ganu
  • [RFC PATCH v2 45/48] efi_memory: do not add RAM memory to the memory map   Sughosh Ganu
    • [RFC PATCH v2 45/48] efi_memory: do not add RAM memory to the memory map   Simon Glass
  • [RFC PATCH v2 46/48] lmb: mark the EFI runtime memory regions as reserved   Sughosh Ganu
    • [RFC PATCH v2 46/48] lmb: mark the EFI runtime memory regions as reserved   Simon Glass
  • [RFC PATCH v2 47/48] test: event: update the expected event dump output   Sughosh Ganu
  • [RFC PATCH v2 48/48] temp: mx6sabresd: bump up the size limit of the board   Sughosh Ganu
    • [RFC PATCH v2 48/48] temp: mx6sabresd: bump up the size limit of the board   Tom Rini
  • [RFC PATCH v2 00/48] Make U-Boot memory reservations coherent   Tom Rini
  • [RFC PATCH v2 00/48] Make U-Boot memory reservations coherent   Tom Rini
    • [RFC PATCH v2 00/48] Make U-Boot memory reservations coherent   Simon Glass
• [PATCH v3 0/5] video: Improve syncing performance with cyclic   Simon Glass
  • [PATCH v3 1/5] cyclic: Add a symbol for SPL   Simon Glass
  • [PATCH v3 2/5] video: Move last_sync to private data   Simon Glass
  • [PATCH v3 3/5] video: Use cyclic to handle video sync   Simon Glass
  • [PATCH v3 4/5] sandbox: Increase cyclic CPU-time limit   Simon Glass
    • [PATCH v3 4/5] sandbox: Increase cyclic CPU-time limit   Caleb Connolly
      • [PATCH v3 4/5] sandbox: Increase cyclic CPU-time limit   Simon Glass
  • [PATCH v3 5/5] sandbox: Drop video-sync in serial driver   Simon Glass
  • [PATCH v3 0/5] video: Improve syncing performance with cyclic   Caleb Connolly
    • [PATCH v3 0/5] video: Improve syncing performance with cyclic   Simon Glass
• [PATCH V4 0/6] Low Power Mode: Package TIFS Stub in BeaglePlay   Dhruva Gole
  • [PATCH V4 1/6] arm: dts: k3-am625-beagleplay: Package TIFS Stub   Dhruva Gole
  • [PATCH V4 2/6] doc: beagle: am62x_beagleplay: Update the boot flow to show TIFS Stub   Dhruva Gole
  • [PATCH V4 3/6] doc: beagle: am62x_beagleplay: Add TIFS Stub in image format   Dhruva Gole
  • [PATCH V4 4/6] doc: ti: k3: Add TIFS Stub documentation   Dhruva Gole
  • [PATCH V4 5/6] doc: ti: am62*: Mention TIFS Stub in img fmts and boot flow   Dhruva Gole
  • [PATCH V4 6/6] MAINTAINERS: Include the TI docs under ARM TI   Dhruva Gole
• [PATCH v2 0/5] bootstd: Add Android support   Mattijs Korpershoek
• [PATCH v1 0/4] Sync StarFive JH7110 clock and reset dt-bindings with Linux   Hal Feng
• [PATCH v2] arm: mvebu: Enable bootstd and other modernization for Synology DS414 (Armada XP) board   Phil Sutter
  • [PATCH v2] arm: mvebu: Enable bootstd and other modernization for Synology DS414 (Armada XP) board   Tony Dinh
• [PATCH v2] msc_sm2s_imx8mp: Adjust the initrd_addr location   Fabio Estevam
  • [PATCH v2] msc_sm2s_imx8mp: Adjust the initrd_addr location   Tom Rini
  • [PATCH v2] msc_sm2s_imx8mp: Adjust the initrd_addr location   Fabio Estevam
• zynq_gem without PHY   Patrick Huesmann
• [PATCH 0/3] rockchip: enable PCIe/NVMe support for Theobroma RK3588 devices   Quentin Schulz
  • [PATCH 1/3] arm64: dts: rockchip: add PCIe3 support on rk3588-jaguar   Quentin Schulz
    • [PATCH 1/3] arm64: dts: rockchip: add PCIe3 support on rk3588-jaguar   Heiko Stübner
  • [PATCH 2/3] rockchip: jaguar-rk3588: add PCIe M.2 M-KEY NVMe support   Quentin Schulz
    • [PATCH 2/3] rockchip: jaguar-rk3588: add PCIe M.2 M-KEY NVMe support   Heiko Stübner
  • [PATCH 3/3] rockchip: tiger-rk3588: add PCIe support   Quentin Schulz
    • [PATCH 3/3] rockchip: tiger-rk3588: add PCIe support   Heiko Stübner
  • [PATCH 0/3] rockchip: enable PCIe/NVMe support for Theobroma RK3588 devices   Sumit Garg
• [PATCH] test: test for ignore OsIndications   Ilias Apalodimas
  • [PATCH] test: test for ignore OsIndications   Ilias Apalodimas
• [PATCH v2] test: test for ignore OsIndications   Ilias Apalodimas
• [PATCH] clk: Propagate clk_set_rate() if CLK_SET_PARENT_RATE present for gate and mux   Michael Trimarchi
• [PATCH v1] verdin-am62: add DFU, USB and UUU fastboot support   Vitor Soares
  • [PATCH v1] verdin-am62: add DFU, USB and UUU fastboot support   Francesco Dolcini
• [PATCH] efi_loader: adjust config options for capsule updates   Ilias Apalodimas
• (subset) [PATCH 00/14] testb: Various tweaks and fixes for Labgrid   Tom Rini
• [PATCH] test/py/tests: Update some network dependencies   Tom Rini
• [PATCH] CI: Make pytest export JUnitXML   Tom Rini
• [PATCH] ARM: dts: imx8mp-beacon-kit-u-boot: Drop EQoS clock work-around   Adam Ford
  • [PATCH] ARM: dts: imx8mp-beacon-kit-u-boot: Drop EQoS clock work-around   Peng Fan
  • [PATCH] ARM: dts: imx8mp-beacon-kit-u-boot: Drop EQoS clock work-around   Fabio Estevam
• [PATCH v3 00/12] xtensa: Enable qemu-xtensa board   Tom Rini
• Missing eth1addr for Banana Pi BPI-R3   Leith Bade
  • Missing eth1addr for Banana Pi BPI-R3   Daniel Golle
    • Missing eth1addr for Banana Pi BPI-R3   Leith Bade
• [PATCH v3 00/10] Add support for Ethernet Boot on SK-AM62   Chintan Vankar
  • [PATCH v3 03/10] soc: ti: k3-navss-ringacc: Initialize base address of ring cfg registers   Chintan Vankar
  • [PATCH v3 05/10] dma: ti: k3-udma: Add support for native configuration of chan/flow   Chintan Vankar
  • [PATCH v3 06/10] arm: mach-k3: am62x: am625_init: Probe AM65 CPSW NUSS   Chintan Vankar
  • [PATCH v3 08/10] configs: am62: Enable configs required for Ethboot   Chintan Vankar
    • [PATCH v3 08/10] configs: am62: Enable configs required for Ethboot   Tom Rini
  • [PATCH v3 09/10] arm: dts: k3-am625-r5-sk: Enable DM services for main_pktdma   Chintan Vankar
  • [PATCH v3 10/10] arch: arm: dts: k3-am62-sk-u-boot: Add missing "bootph-all" property to phy_gmii_sel node   Chintan Vankar
    • [PATCH v3 10/10] arch: arm: dts: k3-am62-sk-u-boot: Add missing "bootph-all" property to phy_gmii_sel node   Tom Rini
• [PATCH v3 01/10] common: spl: spl: Init DRAM size in R5/A53 SPL   Chintan Vankar
  • [PATCH v3 01/10] common: spl: spl: Init DRAM size in R5/A53 SPL   Dhruva Gole
  • [PATCH v3 01/10] common: spl: spl: Init DRAM size in R5/A53 SPL   Tom Rini
• [PATCH v3 02/10] firmware: ti_sci: Add No-OP for "RX_FL_CFG"   Chintan Vankar
• [PATCH v3 04/10] soc: ti: k3-navss-ringacc: Fix reset ring API   Chintan Vankar
• [PATCH v3 07/10] configs: am62: Add configs for enabling ETHBOOT in R5SPL   Chintan Vankar
  • [PATCH v3 07/10] configs: am62: Add configs for enabling ETHBOOT in R5SPL   Tom Rini
    • [PATCH v3 07/10] configs: am62: Add configs for enabling ETHBOOT in R5SPL   Chintan Vankar
      • [PATCH v3 07/10] configs: am62: Add configs for enabling ETHBOOT in R5SPL   Tom Rini
• [PATCH V2] clk: Propagate clk_set_rate() if CLK_SET_PARENT_RATE present for gate and mux   Michael Trimarchi
• [PATCH V2 0/2] Support imx8m composite mux   Michael Trimarchi
  • [PATCH V2 1/2] clk: clk-mux: Make public the clk_fetch_parent_index   Michael Trimarchi
  • [PATCH V2] clk: imx: add mux ops for i.MX8M composite clk   Michael Trimarchi
  • [PATCH V2 0/2] Support imx8m composite mux   Fabio Estevam
• [PATCH v2 1/1] efi_loader: print device-tree in dtbdump.efi   Ilias Apalodimas
• [PULL] Early Qualcomm changes for v2024.10   Caleb Connolly
  • [PULL] Early Qualcomm changes for v2024.10   Tom Rini
• [PATCH 1/6] usb: gadget: g_dnl: Drop usb_gadget_controller_number()   Mattijs Korpershoek
• [PATCH v4 0/2] led: implement software blinking   Mikhail Kshevetskiy
• [PATCH v4 1/2] led: Implement software led blinking   Mikhail Kshevetskiy
• [PATCH v4 2/2] led: Add dts property to specify blinking of the led   Mikhail Kshevetskiy
• [PATCH 00/11] usb: gadget: Introduce handle_interrupts ops to USB_GADGET_GENERIC uclass   Mattijs Korpershoek
• [PATCH] configs: phycore-imx8mp_defconfig: Initialize caam   Leonard Anderweit
  • [PATCH] configs: phycore-imx8mp_defconfig: Initialize caam   Fabio Estevam
• [PATCH] include/fastboot.h: add missing types.h include   Mattijs Korpershoek
  • [PATCH] include/fastboot.h: add missing types.h include   Mattijs Korpershoek
• [PATCH v2] net/tftp: make tftpput working with servers that do not use OACK   Mikhail Kshevetskiy
• Please pull u-boot-tegra staging   Svyatoslav Ryhel
  • Please pull u-boot-tegra staging   Tom Rini
• [PATCH 1/1] mmc: fsl_esdhc_imx: Fix error message   Alexander Stein
  • [PATCH 1/1] mmc: fsl_esdhc_imx: Fix error message   Fabio Estevam
• [PATCH v2 0/7] mtd: spinand: initial ecc engine support & sync supported flashes with linux-6.6   Mikhail Kshevetskiy
  • [PATCH v2 1/7] mtd: spinand: Use the spi-mem dirmap API   Mikhail Kshevetskiy
  • [PATCH v2 2/7] mtd: spinand: Add a NAND page I/O request type   Mikhail Kshevetskiy
  • [PATCH v2 3/7] mtd: spinand: simulate behavior of linux's function spinand_wait()   Mikhail Kshevetskiy
  • [PATCH v2 4/7] mtd: spinand: preparation for ecc engine adding   Mikhail Kshevetskiy
  • [PATCH v2 5/7] mtd: nand: add initial ecc engine support   Mikhail Kshevetskiy
  • [PATCH v2 6/7] mtd: spinand: sync supported flashes with linux-6.6   Mikhail Kshevetskiy
  • [PATCH v2 7/7] mtd: spinand: add Winbond W25N04KV flash support   Mikhail Kshevetskiy
• [PATCH 1/5] board: rockchip: Add Pine64 Quartz64-A Board   Christopher Obbard
• [PATCH v2 0/8] net: tcp: improve tcp support   Mikhail Kshevetskiy
  • [PATCH v2 1/9] net/tcp: fix TCP options processing   Mikhail Kshevetskiy
  • [PATCH v2 2/9] net/tcp: fix selective acknowledge   Mikhail Kshevetskiy
  • [PATCH v2 3/9] net/tcp: put connection specific data into a tcp_stream structure   Mikhail Kshevetskiy
  • [PATCH v2 4/9] net/tcp: add connection info to tcp_stream structure   Mikhail Kshevetskiy
  • [PATCH v2 5/9] net/tcp: rename ack_edge and seq_init to more common rcv_nxt and irs   Mikhail Kshevetskiy
  • [PATCH v2 6/9] net/tcp: improve tcp framework, use better state machine   Mikhail Kshevetskiy
  • [PATCH v2 7/9] net/tcp: simplify tcp header filling code   Mikhail Kshevetskiy
  • [PATCH v2 8/9] net/tcp: define a fallback value for rcv_wnd size   Mikhail Kshevetskiy
  • [PATCH v2 9/9] net/netcat: add netcat over tcp support   Mikhail Kshevetskiy
  • [PATCH v2 0/8] net: tcp: improve tcp support   Peter Robinson
    • [PATCH v2 0/8] net: tcp: improve tcp support   Mikhail Kshevetskiy
    • [PATCH v2 0/8] net: tcp: improve tcp support   Peter Robinson
• [PATCH V5 0/6] Low Power Mode: Package TIFS Stub in BeaglePlay   Dhruva Gole
  • [PATCH V5 1/6] arm: dts: k3-am625-beagleplay: Package TIFS Stub   Dhruva Gole
  • [PATCH V5 2/6] doc: beagle: am62x_beagleplay: Update the boot flow to show TIFS Stub   Dhruva Gole
  • [PATCH V5 3/6] doc: beagle: am62x_beagleplay: Add TIFS Stub in image format   Dhruva Gole
  • [PATCH V5 4/6] doc: ti: k3: Add TIFS Stub documentation   Dhruva Gole
  • [PATCH V5 5/6] doc: ti: am62*: Mention TIFS Stub in img fmts and boot flow   Dhruva Gole
  • [PATCH V5 6/6] MAINTAINERS: Include the TI docs under ARM TI   Dhruva Gole
• [PATCH 0/5] finish using .dtso for overlay source files   Rasmus Villemoes
  • [PATCH 3/5] test: overlay: rename overlay source files to .dtso   Rasmus Villemoes
  • [PATCH 4/5] test/py: efi_capsule: rename device tree overlay source to .dtso   Rasmus Villemoes
  • [PATCH 5/5] kbuild: Disallow DTB overlays to built from .dts named source files   Rasmus Villemoes
• [PATCH 2/5] kbuild: Allow DTB overlays to built into .dtbo.S files   Rasmus Villemoes
• [PATCH] Revert "buildman: Always use the full path in CROSS_COMPILE"   Tom Rini
  • [PATCH] Revert "buildman: Always use the full path in CROSS_COMPILE"   Tom Rini
• [PATCH 1/5] arm64: dts: imx8mp: rename DHCOM SoM overlays to .dtso   Marek Vasut
  • [PATCH 1/5] arm64: dts: imx8mp: rename DHCOM SoM overlays to .dtso   Rasmus Villemoes
  • [PATCH 1/5] arm64: dts: imx8mp: rename DHCOM SoM overlays to .dtso   Rasmus Villemoes
• [PATCH] configs: Remove duplicate newlines   Tom Rini
• [PATCH] Fix Kconfig coding style from spaces to tab   Tom Rini
• [PATCH] mkimage: Allow 'auto-conf' signing of scripts   Tom Rini
• [PATCH v5] cmd: bootm: add ELF file support   Tom Rini
• [PATCH] doc: board: phytec: phycore-am6: Describe UART based boot   Tom Rini
• [PATCH] configs: am64x_evm_a53_defconfig: Enable I2C GPIO drivers   Tom Rini
• [PATCH] e1000: add support for i226   Tom Rini
• [PATCH] pci_ids: fix i225 unprogrammed value   Tom Rini
• [PATCH] watchdog: mpc8xxx: Fix timer value   Tom Rini
• [PATCH] dt-bindings: nvmem: convert U-Boot env to a layout   Rafał Miłecki
  • [PATCH] dt-bindings: nvmem: convert U-Boot env to a layout   Miquel Raynal
    • [PATCH] dt-bindings: nvmem: convert U-Boot env to a layout   Rafał Miłecki
  • [PATCH] dt-bindings: nvmem: convert U-Boot env to a layout   Rob Herring (Arm)
• [PATCH v2 1/5] usb: tcpm: add core framework   Marek Vasut
  • [PATCH v2 1/5] usb: tcpm: add core framework   Tim Harvey
  • [PATCH v2 1/5] usb: tcpm: add core framework   Simon Glass
• [PATCH v2 2/5] usb: tcpm: fusb302: add driver   Marek Vasut
• [PATCH v2 3/5] board: rock5b-rk3588: add USB-C controller support   Marek Vasut
• [PULL] u-boot-sh/next-clk-sync   Marek Vasut
  • [PULL] u-boot-sh/next-clk-sync   Tom Rini
• [PULL] u-boot-usb/master   Marek Vasut
  • [PULL] u-boot-usb/master   Tom Rini
• [PATCH] timer: mtk: skip setting parent with dummy fixed-clock   Christian Marangi
• [GIT PULL] Please pull u-boot-imx-master-20240706   Fabio Estevam
  • [GIT PULL] Please pull u-boot-imx-master-20240706   Tom Rini
• [PATCH v3] ARM: imx: verdin-imx8mm: Set CAN oscillator frequency based on model   Fabio Estevam
• [PATCH] ARM: imx: Enable cat and xxd commands on DH i.MX8M Plus DHCOM   Fabio Estevam
• [PATCH 1/2] ARM: imx: Enable PCA953x driver on DH i.MX8MP DHCOM PDK2   Fabio Estevam
• [PATCH v4 1/4] binman: Add nxp_imx8mcst etype for i.MX8M flash.bin signing   Marek Vasut
  • [PATCH v4 1/4] binman: Add nxp_imx8mcst etype for i.MX8M flash.bin signing   Simon Glass
• [EXT] Re: [RFC] usb: xhci: Some USB devices fail to initialize   Marek Vasut
• x86_64+kvm: int_exception_handler() Exception 13 while executing option rom   Vitaly Chikunov
• [PATCH 0/4] IMX8 series small clock update   Michael Trimarchi
  • [PATCH 1/4] clk: imx: clk-imx8mn Fix nand and spi clock parent   Michael Trimarchi
    • [PATCH 1/4] clk: imx: clk-imx8mn Fix nand and spi clock parent   Fabio Estevam
      • [PATCH 1/4] clk: imx: clk-imx8mn Fix nand and spi clock parent   Michael Nazzareno Trimarchi
      • [PATCH 1/4] clk: imx: clk-imx8mn Fix nand and spi clock parent   Fabio Estevam
      • [PATCH 1/4] clk: imx: clk-imx8mn Fix nand and spi clock parent   Michael Nazzareno Trimarchi
  • [PATCH 2/4] clk: imx8mn: Make parent names arrays const pointers   Michael Trimarchi
  • [PATCH 3/4] clk: imx8mm: Make parent names arrays const pointers   Michael Trimarchi
  • [PATCH 4/4] clk: imx8mp: Make parent names arrays const pointers   Michael Trimarchi
• [PATCH v3] arm: mvebu: Enable bootstd and other modernization for Synology DS414 (Armada XP) board   Tony Dinh
  • [PATCH v3] arm: mvebu: Enable bootstd and other modernization for Synology DS414 (Armada XP) board   Stefan Roese
    • [PATCH v3] arm: mvebu: Enable bootstd and other modernization for Synology DS414 (Armada XP) board   Phil Sutter
      • [PATCH v3] arm: mvebu: Enable bootstd and other modernization for Synology DS414 (Armada XP) board   Tony Dinh
• [PATCH] net: ftgmac100: Add Aspeed AST2700 support   Jacky Chou
• [PATCH 0/6] Extend SOM detection   Daniel Schultz
  • [PATCH 1/6] include: env: phytec: overlays: Add extension command   Daniel Schultz
    • [PATCH 1/6] include: env: phytec: overlays: Add extension command   Yannic Moog
      • [PATCH 1/6] include: env: phytec: overlays: Add extension command   Daniel Schultz
      • [PATCH 1/6] include: env: phytec: overlays: Add extension command   Wadim Egorov
      • [PATCH 1/6] include: env: phytec: overlays: Add extension command   Yannic Moog
  • [PATCH 2/6] include: env: phytec: k3_mmc: Apply extension overlays   Daniel Schultz
  • [PATCH 3/6] board: phytec: common: k3: Add SOM detection overlays   Daniel Schultz
  • [PATCH 4/6] board: phytec: common: Kconfig: Enable SUPPORT_EXTENSION_SCAN   Daniel Schultz
  • [PATCH 5/6] configs: phytec_am62x_a53_defconfig: Set CONFIG_CMD_EXTENSION   Daniel Schultz
  • [PATCH 6/6] configs: phycore_am64x_a53_defconfig: Enable SOM detection   Daniel Schultz
  • [PATCH 0/6] Extend SOM detection   Daniel Schultz
• [PATCH 2/3] rockchip: fix wrong PCI range address in rk3568 dtsi   Etienne Dublé
• [PATCH v2 0/3] Meson: R/W support for pages used by boot ROM   Arseniy Krasnov
  • [PATCH v2 1/3] mtd: rawnand: nand_base: support for 'NAND_IS_BOOT_MEDIUM' flag   Arseniy Krasnov
  • [PATCH v2 2/3] mtd: rawnand: meson: refactor use of 'meson_nfc_cmd_access()'   Arseniy Krasnov
  • [PATCH v2 3/3] mtd: rawnand: meson: read/write access for boot ROM pages   Arseniy Krasnov
• [PATCH 0/6] Enable audio playback in AM62x SoC   Scaria Kochidanadu
  • [PATCH 2/6] sound: ti: Add TLV320AIC3106 Codec   Scaria Kochidanadu
  • [PATCH 3/6] sound: ti: Add MCASP driver for transfer of Audio data to sound codec   Scaria Kochidanadu
  • [PATCH 4/6] arm: dts: k3-am625-sk-u-boot.dtsi: Add sound driver nodes   Scaria Kochidanadu
    • [PATCH 4/6] arm: dts: k3-am625-sk-u-boot.dtsi: Add sound driver nodes   Tom Rini
  • [PATCH 5/6] configs: am62x_evm_a53_defconfig: Enable sound and I2C commands   Scaria Kochidanadu
  • [PATCH 6/6] linux: bitmap.h: Add for_each_set_bit_from() function   Scaria Kochidanadu
    • [PATCH 6/6] linux: bitmap.h: Add for_each_set_bit_from() function   Tom Rini
• [PATCH 1/6] sound: ti: Add sound support for am625 board in Uboot   Scaria Kochidanadu
  • [PATCH 1/6] sound: ti: Add sound support for am625 board in Uboot   Tom Rini
    • [EXTERNAL] Re: [PATCH 1/6] sound: ti: Add sound support for am625 board in Uboot   Scaria Kochidanadu
      • [EXTERNAL] Re: [PATCH 1/6] sound: ti: Add sound support for am625 board in Uboot   Tom Rini
• [PATCH] Revert "zlib: Port fix for CVE-2016-9841 to U-Boot"   Michal Simek
• [PATCH] net: remove duplicate eth_env_set_enetaddr_by_index() declaration   A. Sverdlin
• [PATCH] config: Enable the config CONFIG_MMC_SPEED_MODE_SET   Venkatesh Yadav Abbarapu
  • [PATCH] config: Enable the config CONFIG_MMC_SPEED_MODE_SET   Michal Simek
• [PATCH v6 0/3] Introduce mtdblock device   Alexey Romanov
  • [PATCH v6 0/3] Introduce mtdblock device   Dario Binacchi
• [PATCH v5 0/6] Introduce UBI block device   Alexey Romanov
• [PATCH 2/3] soc: qcom: rpmh and cmd-db drivers   Caleb Connolly
  • [PATCH 2/3] soc: qcom: rpmh and cmd-db drivers   Sumit Garg
• [PATCH v2 0/4] qcom: rpmh core and regulator support   Caleb Connolly
  • [PATCH v2 1/4] linux/bitmap.h: add bitmap_empty helper   Caleb Connolly
  • [PATCH v2 2/4] soc: qcom: rpmh and cmd-db drivers   Caleb Connolly
  • [PATCH v2 3/4] power: regulator: add qcom-rpmh-regulator   Caleb Connolly
  • [PATCH v2 4/4] qcom_defconfig: enable rpmh regulators   Caleb Connolly
• [PATCH] ARM: stm32: Fix secure_waitbits() mask check   Marek Vasut
• [PATCH] configs: am62x_evm_a53_defconfig: Remove CONFIG_SYS_BOOTM_LEN   Kamlesh Gurudasani
  • [PATCH] configs: am62x_evm_a53_defconfig: Remove CONFIG_SYS_BOOTM_LEN   Tom Rini
  • [PATCH] configs: am62x_evm_a53_defconfig: Remove CONFIG_SYS_BOOTM_LEN   Manorit Chawdhry
    • [PATCH] configs: am62x_evm_a53_defconfig: Remove CONFIG_SYS_BOOTM_LEN   Kamlesh Gurudasani
• [PATCH 1/1] riscv: add RISC-V fields to bdinfo command   Leo Liang
• [PATCH 1/1] riscv: semihosting: correct alignment   Leo Liang
• [PATCH] board: sifive: unmatched: remove extra space in fdtfile value   Leo Liang
• [PATCH v3 0/5] qcom: rpmh core and regulator support   Caleb Connolly
  • [PATCH v3 1/5] linux/bitmap.h: add bitmap_empty helper   Caleb Connolly
    • [PATCH v3 1/5] linux/bitmap.h: add bitmap_empty helper   Tom Rini
  • [PATCH v3 2/5] soc: qcom: rpmh and cmd-db drivers   Caleb Connolly
  • [PATCH v3 3/5] power: regulator: add qcom-rpmh-regulator   Caleb Connolly
  • [PATCH v3 4/5] qcom_defconfig: enable rpmh regulators   Caleb Connolly
  • [PATCH v3 5/5] fixup! soc: qcom: rpmh and cmd-db drivers   Caleb Connolly
• [PATCH v3] configs: add mvebu_espressobin_ultra-88f3720_defconfig   Stefan Roese
• [PATCH] arm: mvebu: env_sf_get_env_addr() missing check for CONFIG_ENV_IS_IN_SPI_FLASH   Stefan Roese
• [PATCH] arm: dts: mvebu: Update DTS for Thecus N2350 board   Stefan Roese
• [PATCH u-boot-marvell 00/16] Turris Omnia DDR training changes   Stefan Roese
• [PATCH] mvebu: armada-8k: respect CONFIG_DISTRO_DEFAULTS   Stefan Roese
• Please pull u-boot-marvell/master   Stefan Roese
  • Please pull u-boot-marvell/master   Tom Rini
• [PATCH] doc/sphinx/requirements.txt: Bump certifi and urllib3   Tom Rini
  • [PATCH] doc/sphinx/requirements.txt: Bump certifi and urllib3   Simon Glass
• [RFC v3 0/2] FIT documentation link vs copy   Sam Povilus
• [RFC v3 1/2] doc: Remove FIT documentation that is elsewhere   Sam Povilus
  • [RFC v3 1/2] doc: Remove FIT documentation that is elsewhere   Heinrich Schuchardt
• [RFC v3 2/2] doc: add missing table of content links   Sam Povilus
  • [RFC v3 2/2] doc: add missing table of content links   Heinrich Schuchardt
    • [RFC v3 2/2] doc: add missing table of content links   Heinrich Schuchardt
• [RFC v4 0/2] FIT documentation link vs copy   Sam Povilus
  • [RFC v4 1/2] doc: Remove FIT documentation that is elsewhere   Sam Povilus
    • [RFC v4 1/2] doc: Remove FIT documentation that is elsewhere   Simon Glass
  • [RFC v4 2/2] doc: add missing table of content links   Sam Povilus
    • [RFC v4 2/2] doc: add missing table of content links   Simon Glass
• [PATCH v4 00/14] mediatek: cumulative trivial fix for OF_UPSTREAM support   Tom Rini
• [PATCH v2 00/40] mmc: dw_mmc: Enable eMMC on E850-96 board   Sam Protsenko
• [PATCH] ti: omap: am3517evm: Move environment definition to env file   Adam Ford
• [PATCH] xilinx: Enable the NFS command for zynqmp_kria   Prasad Kummari
  • [PATCH] xilinx: Enable the NFS command for zynqmp_kria   Michal Simek
• [PATCH] clk: clk-uclass: Print clk name in clk_enable/clk_disable   Michael Trimarchi
• [PATCH] eth: asix88179: reset during probe   Mattijs Korpershoek
  • [PATCH] eth: asix88179: reset during probe   Marek Vasut
    • [PATCH] eth: asix88179: reset during probe   Mattijs Korpershoek
• [PATCH v2 1/3] phy: Extend generic_setup_phy() with PHY mode and submode   Mattijs Korpershoek
• [PATCH v2 2/3] phy: rcar: Split init and set_mode operations   Mattijs Korpershoek
• [PATCH] regulator: fixed: fix regulator-fixed-clock   John Keeping
  • [PATCH] regulator: fixed: fix regulator-fixed-clock   Simon Glass
• [PATCH v2 3/3] phy: test: Implement sandbox PHY .set_mode and DM test   Mattijs Korpershoek
• [PATCH v4 00/21] qcom: rpmh core and regulator support   Caleb Connolly
  • [PATCH v4 01/21] linux/bitmap.h: add bitmap_empty helper   Caleb Connolly
    • [PATCH v4 01/21] linux/bitmap.h: add bitmap_empty helper   Tom Rini
  • [PATCH v4 02/21] soc: qcom: import rpmh and cmd-db drivers from Linux   Caleb Connolly
  • [PATCH v4 03/21] soc: qcom: cmd-db: adjust headers for U-Boot   Caleb Connolly
  • [PATCH v4 04/21] soc: qcom: cmd-db: drop unused functions   Caleb Connolly
  • [PATCH v4 05/21] soc: qcom: cmd-db: replace cmd_db_ready() with cmd_db_init()   Caleb Connolly
  • [PATCH v4 06/21] soc: qcom: cmd-db: adjust for U-Boot API   Caleb Connolly
  • [PATCH v4 07/21] soc: qcom: rpmh-rsc: drop unused multi-threading and non-active TCS support   Caleb Connolly
  • [PATCH v4 08/21] soc: qcom: rpmh-rsc: adjust headers for U-Boot   Caleb Connolly
  • [PATCH v4 09/21] soc: qcom: rpmh-rsc: adjust probe for U-Boot   Caleb Connolly
  • [PATCH v4 10/21] soc: qcom: rpmh-rsc: remaining U-Boot API changes   Caleb Connolly
  • [PATCH v4 11/21] soc: qcom: rpmh: adjust headers for U-Boot   Caleb Connolly
  • [PATCH v4 12/21] soc: qcom: rpmh: drop unused functions   Caleb Connolly
  • [PATCH v4 13/21] soc: qcom: rpmh: U-Boot API changes   Caleb Connolly
  • [PATCH v4 14/21] power: regulator: import qcom-rpmh-regulator from Linux   Caleb Connolly
  • [PATCH v4 15/21] power: regulator: adjust headers for U-Boot   Caleb Connolly
  • [PATCH v4 16/21] power: regulator: qcom-rpmh-regulator: port over lineage_range helpers   Caleb Connolly
  • [PATCH v4 17/21] power: regulator: adjust structs for U-Boot   Caleb Connolly
  • [PATCH v4 18/21] power: regulator: qcom-rpmh-regulator: remove unused regulators   Caleb Connolly
  • [PATCH v4 19/21] power: regulator: qcom-rpmh-regulator: port ops to U-Boot   Caleb Connolly
  • [PATCH v4 20/21] power: regulator: qcom-rpmh-regulator: adjust probe for U-Boot   Caleb Connolly
  • [PATCH v4 21/21] qcom_defconfig: enable rpmh regulators   Caleb Connolly
  • [PATCH v4 00/21] qcom: rpmh core and regulator support   Sumit Garg
    • [PATCH v4 00/21] qcom: rpmh core and regulator support   Caleb Connolly
• [PATCH 0/6] Resubmit series "zlib: Address CVE-2016-9841"   Christophe Leroy
  • [PATCH 1/6] zlib: Rename this variable to here (current decoding table entry)   Christophe Leroy
  • [PATCH 2/6] zlib: Rename write variable to wnext (window write index)   Christophe Leroy
  • [PATCH 3/6] zlib: Fix inflate_fast() when POSTINC macro is set   Christophe Leroy
  • [PATCH 4/6] zlib: Port fix for CVE-2016-9841 to U-Boot   Christophe Leroy
  • [PATCH 5/6] zlib: Misc unrelated updates   Christophe Leroy
  • [PATCH 6/6] zlib: Remove incorrect ZLIB_VERSION   Christophe Leroy
• [PATCH] amd: Enable the NFS command for Versal2   Prasad Kummari
  • [PATCH] amd: Enable the NFS command for Versal2   Michal Simek
• [PATCH] board: raspberrypi: Fix format specifier for printing rev_scheme   Francois Berder
  • [PATCH] board: raspberrypi: Fix format specifier for printing rev_scheme   Peter Robinson
• [PATCH] bloblist: Fix bloblist convention checking.   Raymond Mao
  • [PATCH] bloblist: Fix bloblist convention checking.   Levi Yun
  • [PATCH] bloblist: Fix bloblist convention checking.   Yeo Reum Yun
    • [PATCH] bloblist: Fix bloblist convention checking.   Raymond Mao
      • [PATCH] bloblist: Fix bloblist convention checking.   Yeo Reum Yun
• [PATCH] driver: rng: Do not check ARM_SMCCC_TRNG_VERSION   Leo Yan
  • [PATCH] driver: rng: Do not check ARM_SMCCC_TRNG_VERSION   Weizhao Ouyang
• [PATCH v2] bloblist: Fix bloblist convention checking.   Levi Yun
• [PATCH v3 1/1] bloblist: Fix bloblist convention checking.   Levi Yun
  • [PATCH v3 1/1] bloblist: Fix bloblist convention checking.   Raymond Mao
    • [PATCH v3 1/1] bloblist: Fix bloblist convention checking.   Yeo Reum Yun
• [PATCH] arm: dts: mvebu: Migrate to upstream DT for Synology DS116 (Armada 385) board   Tony Dinh
  • [PATCH] arm: dts: mvebu: Migrate to upstream DT for Synology DS116 (Armada 385) board   Stefan Roese
• [PATCH] mtd: nand: raw: atmel: Use ONFI ECC params if available   Zixun Li
  • [PATCH] mtd: nand: raw: atmel: Use ONFI ECC params if available   Alexander Dahl
• [PATCH] test/py/requirements.txt: Bump zipp to current release   Tom Rini
  • [PATCH] test/py/requirements.txt: Bump zipp to current release   Simon Glass
• [PATCH 09/10] fdtgrep: Allow propagating properties up to supernodes   Manorit Chawdhry
  • [PATCH 09/10] fdtgrep: Allow propagating properties up to supernodes   Quentin Schulz
  • [PATCH 09/10] fdtgrep: Allow propagating properties up to supernodes   Simon Glass
• [PATCH] omap3: igep0x00: Switch to the I2C driver model   Enric Balletbo i Serra
  • [PATCH] omap3: igep0x00: Switch to the I2C driver model   Tom Rini
• [PATCH v2 0/5] finish using .dtso for overlay source files   Rasmus Villemoes
  • [PATCH v2 1/5] arm64: dts: imx8mp: rename DHCOM SoM overlays to .dtso   Rasmus Villemoes
  • [PATCH v2 2/5] kbuild: Allow DTB overlays to built into .dtbo.S files   Rasmus Villemoes
  • [PATCH v2 3/5] test: overlay: rename overlay source files to .dtso   Rasmus Villemoes
  • [PATCH v2 4/5] test/py: efi_capsule: rename device tree overlay source to .dtso   Rasmus Villemoes
  • [PATCH v2 5/5] kbuild: Disallow DTB overlays to built from .dts named source files   Rasmus Villemoes
• [PATCH v3 0/5] bootstd: Add Android support   Mattijs Korpershoek
  • [PATCH v3 1/5] boot: android: Provide vendor_bootimg_addr in boot_get_fdt()   Mattijs Korpershoek
  • [PATCH v3 2/5] bootstd: Add bootflow_iter_check_mmc() helper   Mattijs Korpershoek
    • [PATCH v3 2/5] bootstd: Add bootflow_iter_check_mmc() helper   Simon Glass
  • [PATCH v3 3/5] android: boot: Add set_abootimg_addr() and set_avendor_bootimg_addr()   Mattijs Korpershoek
  • [PATCH v3 4/5] bootstd: Add a bootmeth for Android   Mattijs Korpershoek
  • [PATCH v3 5/5] bootstd: Add test for bootmeth_android   Mattijs Korpershoek
    • [PATCH v3 5/5] bootstd: Add test for bootmeth_android   Julien Masson
    • [PATCH v3 5/5] bootstd: Add test for bootmeth_android   Guillaume LA ROQUE
    • [PATCH v3 5/5] bootstd: Add test for bootmeth_android   Simon Glass
• avoid syscon fallback class for getting regmap   Frank Wunderlich
  • avoid syscon fallback class for getting regmap   Simon Glass
• [PATCH v4] bloblist: fix bloblist convention check.   Levi Yun
  • [PATCH v4] bloblist: fix bloblist convention check.   Raymond Mao
    • [PATCH v4] bloblist: fix bloblist convention check.   Simon Glass
• [PATCH v2 0/4] alist: Implement a pointer list / array of structs   Simon Glass
  • [PATCH v2 1/4] malloc: Support testing with realloc()   Simon Glass
  • [PATCH v2 2/4] lib: Handle a special case with str_to_list()   Simon Glass
  • [PATCH v2 3/4] alist: Add support for an allocated pointer list   Simon Glass
  • [PATCH v2 4/4] lib: Convert str_to_list() to use alist   Simon Glass
• [PATCH v3 0/4] alist: Implement a pointer list / array of structs   Simon Glass
  • [PATCH v3 2/4] lib: Handle a special case with str_to_list()   Simon Glass
  • [PATCH v3 3/4] alist: Add support for an allocated pointer list   Simon Glass
  • [PATCH v3 4/4] lib: Convert str_to_list() to use alist   Simon Glass
• [PATCH v3 1/4] malloc: Support testing with realloc()   Simon Glass
• adding fdt-overlay function - help needed   Frank Wunderlich
  • Aw: adding fdt-overlay function - help needed   Frank Wunderlich
    • adding fdt-overlay function - help needed   Tom Rini
      • adding fdt-overlay function - help needed   Frank Wunderlich
• [PATCH RFC 0/3] ARM64: add symbol name lookup and print a backtrace on exception   Caleb Connolly
  • [PATCH RFC 1/3] drop unused kallsyms support   Caleb Connolly
    • [PATCH RFC 1/3] drop unused kallsyms support   Tom Rini
  • [PATCH RFC 2/3] add support for symbol lookups   Caleb Connolly
    • [PATCH RFC 2/3] add support for symbol lookups   Tom Rini
  • [PATCH RFC 3/3] arm64: unwind stack on exception   Caleb Connolly
    • [PATCH RFC 3/3] arm64: unwind stack on exception   Tom Rini
  • [PATCH RFC 0/3] ARM64: add symbol name lookup and print a backtrace on exception   Tom Rini
• slimbootloader and u-boot payload mmc communication issue   Sébastien Basset
• radxa cm3 2024.01 mmc write error   Belisko Marek
  • radxa cm3 2024.01 mmc write error   Jonas Karlman
• [PATCH 1/2] arm: bcm283x: remove pointless empty hw_watchdog_disable   Rasmus Villemoes
  • [PATCH 2/2] board: rpi: remove leftover CONFIG_HW_WATCHDOG block   Rasmus Villemoes
    • [PATCH 2/2] board: rpi: remove leftover CONFIG_HW_WATCHDOG block   Stefan Roese
  • [PATCH 1/2] arm: bcm283x: remove pointless empty hw_watchdog_disable   Peter Robinson
    • [PATCH 1/2] arm: bcm283x: remove pointless empty hw_watchdog_disable   Stefan Roese
• [PATCH] board: freescale: Replace invalid usage of sprintf by strcat   Francois Berder
• [PATCH 3/6] power: pmic: sunxi: replace AXP717 SPL driver   Chris Morgan
• sunxi DRAM init: Allwinner D1s: auto scan dram rank & width failed   indrek.kruusa at gmail.com
• [PATCH] buildman: Show board list with -x   Simon Glass
  • [PATCH] buildman: Show board list with -x   Tom Rini
• [PATCH] clk: zynqmp: Add set_rate support for display clocks   Venkatesh Yadav Abbarapu
  • [PATCH] clk: zynqmp: Add set_rate support for display clocks   Michal Simek
• [PATCH v3 1/2] board: rockchip: Add FriendlyElec NanoPi R6C   Sebastian Kropatsch
  • [PATCH v3 2/2] board: rockchip: Add FriendlyElec NanoPi R6S   Sebastian Kropatsch
• [PATCH v2 2/2] board: rockchip: Add FriendlyElec NanoPi R6S   Sebastian Kropatsch
• [PATCH] arm64: versal2: Remove UARTLITE from defconfig   Michal Simek
• [PATCH] mtd: spi-nor: ids: Add IS25LP01GG flash support   Michal Simek
• [PATCH 0/2] env_spi: support overriding spi dev from board code   Michal Simek
• [PATCH 0/4] Add mini configuration support for versal2   Michal Simek
• [GIT PULL] Please pull u-boot-dfu-20240711   Mattijs Korpershoek
  • [GIT PULL] Please pull u-boot-dfu-20240711   Tom Rini
• [PATCH 0/2] sunxi: v3s: add network support   Michael Walle
• [PATCH] sunxi: SPL SPI: add support for the V3s SoC   Michael Walle
  • [PATCH] sunxi: SPL SPI: add support for the V3s SoC   Andre Przywara
• [PATCH 1/6] board_f: Add support for CONFIG_OF_BOARD_FIXUP for XIP images   Marek Behún
  • [PATCH 1/6] board_f: Add support for CONFIG_OF_BOARD_FIXUP for XIP images   Simon Glass
• [PATCH 2/6] board: freescale: p1_p2_rdb_pc: Add weak function p1_p2_rdb_pc_fix_fdt_model() for fixing DT model string   Marek Behún
• [PATCH 3/6] powerpc: mpc8xxx: Extend find_law() to find_law_by_addr_id()   Marek Behún
• [PATCH 4/6] powerpc: mpc85xx: use CONFIG_VAL() for SYS_MONITOR_BASE in start.s   Marek Behún
• [PATCH 5/6] powerpc: use CONFIG_IS_ENABLED() when checking for DM_SERIAL in include/asm/config.h   Marek Behún
• [PATCH 6/6] powerpc: Add support for CZ.NIC Turris 1.x routers   Marek Behún
• [PATCH v5 00/23] qcom: rpmh core and regulator support   Caleb Connolly
  • [PATCH v5 01/23] linux/bitmap.h: add bitmap_empty helper   Caleb Connolly
  • [PATCH v5 02/23] soc: qcom: import rpmh and cmd-db drivers from Linux   Caleb Connolly
  • [PATCH v5 03/23] soc: qcom: cmd-db: adjust headers for U-Boot   Caleb Connolly
  • [PATCH v5 04/23] soc: qcom: cmd-db: drop unused functions   Caleb Connolly
  • [PATCH v5 05/23] soc: qcom: cmd-db: replace cmd_db_ready() with cmd_db_init()   Caleb Connolly
    • [PATCH v5 05/23] soc: qcom: cmd-db: replace cmd_db_ready() with cmd_db_init()   Simon Glass
  • [PATCH v5 06/23] soc: qcom: cmd-db: adjust for U-Boot API   Caleb Connolly
  • [PATCH v5 07/23] soc: qcom: rpmh-rsc: drop unused multi-threading and non-active TCS support   Caleb Connolly
  • [PATCH v5 08/23] soc: qcom: rpmh-rsc: adjust headers for U-Boot   Caleb Connolly
  • [PATCH v5 09/23] soc: qcom: rpmh-rsc: adjust probe for U-Boot   Caleb Connolly
  • [PATCH v5 10/23] soc: qcom: rpmh-rsc: remaining U-Boot API changes   Caleb Connolly
  • [PATCH v5 11/23] soc: qcom: rpmh: adjust headers for U-Boot   Caleb Connolly
  • [PATCH v5 12/23] soc: qcom: rpmh: drop unused functions   Caleb Connolly
  • [PATCH v5 13/23] soc: qcom: rpmh: U-Boot API changes   Caleb Connolly
  • [PATCH v5 14/23] soc: qcom: add build infrastructure   Caleb Connolly
  • [PATCH v5 15/23] power: regulator: import qcom-rpmh-regulator from Linux   Caleb Connolly
  • [PATCH v5 16/23] power: regulator: qcom-rpmh-regulator: adjust headers for U-Boot   Caleb Connolly
  • [PATCH v5 17/23] power: regulator: qcom-rpmh-regulator: port over lineage_range helpers   Caleb Connolly
  • [PATCH v5 18/23] power: regulator: qcom-rpmh-regulator: adjust structs for U-Boot   Caleb Connolly
  • [PATCH v5 19/23] power: regulator: qcom-rpmh-regulator: remove unused regulators   Caleb Connolly
  • [PATCH v5 20/23] power: regulator: qcom-rpmh-regulator: port ops to U-Boot   Caleb Connolly
  • [PATCH v5 21/23] power: regulator: qcom-rpmh-regulator: adjust probe for U-Boot   Caleb Connolly
  • [PATCH v5 22/23] power: regulator: qcom-rpmh-regulator: add build infra   Caleb Connolly
  • [PATCH v5 23/23] qcom_defconfig: enable rpmh regulators   Caleb Connolly
• [PATCH v2] amd: Enable the NFS command for Versal Gen 2   Prasad Kummari
  • [PATCH v2] amd: Enable the NFS command for Versal Gen 2   Michal Simek
• [PATCH v2 6/7] configs: rockchip: Enable ethernet driver on RK356x boards   Diederik de Haas
• [PATCH] riscv: dts: jh7110: Enable PLL node in SPL   E Shattow
• [PATCH] sunxi: board: probe USB gadget   Michael Walle
• env: CONFIG_DEFAULT_ENV_FILE and CFG_EXTRA_ENV_SETTINGS   Tony Dinh
  • env: CONFIG_DEFAULT_ENV_FILE and CFG_EXTRA_ENV_SETTINGS   Tom Rini
    • env: CONFIG_DEFAULT_ENV_FILE and CFG_EXTRA_ENV_SETTINGS   Tony Dinh
  • env: CONFIG_DEFAULT_ENV_FILE and CFG_EXTRA_ENV_SETTINGS   Rasmus Villemoes
    • env: CONFIG_DEFAULT_ENV_FILE and CFG_EXTRA_ENV_SETTINGS   Tom Rini
      • env: CONFIG_DEFAULT_ENV_FILE and CFG_EXTRA_ENV_SETTINGS   Tony Dinh
• [PATCH] cmd: add resize for FDT in bootelf   Tom Rini
• [PATCH v5 0/2] led: implement software blinking   Mikhail Kshevetskiy
  • [PATCH v5 1/2] led: Implement software led blinking   Mikhail Kshevetskiy
    • [PATCH v5 1/2] led: Implement software led blinking   Simon Glass
  • [PATCH v5 2/2] led: Add dts property to specify blinking of the led   Mikhail Kshevetskiy
    • [PATCH v5 2/2] led: Add dts property to specify blinking of the led   Simon Glass
• [PATCH 00/12] clk: mediatek: add OPs to support OF_UPSTREAM   Christian Marangi
• [PATCH] reloc_bootstage: Fix out-of-bounds read   Richard Weinberger
  • [PATCH] reloc_bootstage: Fix out-of-bounds read   Simon Glass
• [PATCH 1/4] squashfs: Fix integer overflow in sqfs_resolve_symlink()   Richard Weinberger
  • [PATCH 2/4] squashfs: Fix integer overflow in sqfs_inode_size()   Richard Weinberger
  • [PATCH 3/4] squashfs: Check sqfs_find_inode() return value   Richard Weinberger
  • [PATCH 4/4] squashfs: Fix stack overflow while symlink resolving   Richard Weinberger
• [PATCH] fat: fat2rtc: Sanitize timestamps   Richard Weinberger
  • [PATCH] fat: fat2rtc: Sanitize timestamps   Heinrich Schuchardt
    • [PATCH] fat: fat2rtc: Sanitize timestamps   Richard Weinberger
      • [PATCH] fat: fat2rtc: Sanitize timestamps   Heinrich Schuchardt
      • [PATCH] fat: fat2rtc: Sanitize timestamps   Tom Rini
• [PATCH v2 0/2] a little RPi watchdog cleanup   Rasmus Villemoes
  • [PATCH v2 1/2] arm: bcm283x: remove unused empty hw_watchdog_disable   Rasmus Villemoes
    • [PATCH v2 1/2] arm: bcm283x: remove unused empty hw_watchdog_disable   Peter Robinson
  • [PATCH v2 2/2] board: rpi: remove leftover CONFIG_HW_WATCHDOG block   Rasmus Villemoes
    • [PATCH v2 2/2] board: rpi: remove leftover CONFIG_HW_WATCHDOG block   Peter Robinson
• [PATCH v3] net/tftp: make tftpput working with servers that do not use OACK   Mikhail Kshevetskiy
• Pull request: rpi-2024.10 rc1   Peter Robinson
  • Pull request: rpi-2024.10 rc1   Tom Rini
• [RESEND PATCH v2 3/5] net: dwc_eth_qos: Adapt probe() for PCI devices   Philip Oberfichtner
• [PATCH uboot] dt-bindings: clock: rcar-gen2: Remove obsolete header files   Geert Uytterhoeven
  • [PATCH uboot] dt-bindings: clock: rcar-gen2: Remove obsolete header files   Tom Rini
• [RESEND PATCH v2 5/5] net: dwc_eth_qos: Add glue driver for Intel MAC   Philip Oberfichtner
• [PATCH] clk: imx6q: Add definition for IMX6QDL_CLK_I2C3   Emil Kronborg
• [PATCH] clk: imx6q: Add definition for IMX6QDL_CLK_PWM1   Emil Kronborg
• [PATCH v2 0/6] power: pmic: sunxi: consolidate AXP SPL drivers   Andre Przywara
  • [PATCH v2 1/6] power: regulator: add AXP717 support   Andre Przywara
  • [PATCH v2 2/6] power: pmic: sunxi: only build AXP drivers for SPL   Andre Przywara
  • [PATCH v2 3/6] power: pmic: sunxi: introduce generic SPL AXP DC/DC driver   Andre Przywara
  • [PATCH v2 4/6] power: pmic: sunxi: add AXP717 SPL support   Andre Przywara
  • [PATCH v2 5/6] power: pmic: sunxi: use generic AXP SPL driver for AXP313   Andre Przywara
  • [PATCH v2 6/6] power: pmic: sunxi: use generic AXP SPL driver for AXP305   Andre Przywara
• [PATCH 0/2] spi: sunxi: Improve the loading speed   Michael Walle
  • [PATCH 1/2] spi: sunxi: drop max_hz handling   Michael Walle
  • [PATCH 2/2] spi: sunxi: fix clock divider calculation for max frequency setting   Michael Walle
  • [PATCH 0/2] spi: sunxi: Improve the loading speed   Peter Robinson
    • [PATCH 0/2] spi: sunxi: Improve the loading speed   Michael Walle
• [PATCH 0/5] arm: exynos: Enable TRNG for E850-96 board   Sam Protsenko
  • [PATCH 1/5] board: samsung: e850-96: Add default partitions   Sam Protsenko
  • [PATCH 2/5] board: samsung: e850-96: Load LDFW firmware on board init   Sam Protsenko
  • [PATCH 3/5] clk: exynos: Add SSS clocks for Exynos850   Sam Protsenko
  • [PATCH 4/5] rng: Add Exynos TRNG driver   Sam Protsenko
    • [PATCH 4/5] rng: Add Exynos TRNG driver   Simon Glass
  • [PATCH 5/5] arm: exynos: Enable TRNG on E850-96 board   Sam Protsenko
• [PATCH v2 00/21] Universal Payload initial series   Simon Glass
  • [PATCH v2 00/21] Universal Payload initial series   Mark Kettenis
• [PATCH v2 01/21] sandbox: Use const in os_jump_to_file()   Simon Glass
• [PATCH v2 02/21] sandbox: Fix a comment in os_find_u_boot()   Simon Glass
• [PATCH v2 03/21] test: Move some SPL-loading test-code into sandbox common   Simon Glass
• [PATCH v2 04/21] sandbox: Enable SPL_LOAD_BLOCK   Simon Glass
• [PATCH v2 05/21] fdt: Don't overwrite bloblist devicetree   Simon Glass
• [PATCH v2 06/21] sandbox: fdt: Avoid overwriting an existing fdt   Simon Glass
• [PATCH v2 07/21] sandbox: Return error code from read/write/seek   Simon Glass
• [PATCH v2 08/21] sandbox: Add ELF file to VPL u-boot.img   Simon Glass
• [PATCH v2 09/21] sandbox: Set up global_data earlier   Simon Glass
• [PATCH v2 10/21] upl: Add support for reading a upl handoff   Simon Glass
• [PATCH v2 11/21] upl: Add support for writing a upl handoff   Simon Glass
• [PATCH v2 12/21] upl: Add basic tests   Simon Glass
• [PATCH v2 13/21] upl: Add a command   Simon Glass
• [PATCH v2 14/21] upl: Add support for Universal Payload in SPL   Simon Glass
• [PATCH v2 15/21] spl: Plumb in the Universal Payload handoff   Simon Glass
• [PATCH v2 16/21] upl: Plumb in universal payload to the init process   Simon Glass
• [PATCH v2 17/21] sandbox_vpl: Enable Universal Payload   Simon Glass
• [PATCH v2 18/21] upl: Add initial documentation   Simon Glass
• [PATCH v2 19/21] sandbox: Add a flag to enable UPL   Simon Glass
• [PATCH v2 20/21] sandbox: Add an SPL loader for UPL   Simon Glass
• [PATCH v2 21/21] upl: Add an end-to-end test   Simon Glass
• [coreboot] Announcement: Official V0.9.1 Release for Universal Payload Sepcification   Simon Glass
• [PATCH v1 1/2] dm: exynos: Correct CONFIG_SYS_BOARD setting for Odroid XU3 boards   Anand Moon
• [PATCH 1/1] efi_loader: find distro device-path for media devices   Heinrich Schuchardt
• [PATCH 01/45] api: Remove duplicate newlines   Marek Vasut
  • [PATCH 02/45] arc: Remove duplicate newlines   Marek Vasut
  • [PATCH 03/45] arm: cpu: Remove duplicate newlines   Marek Vasut
  • [PATCH 04/45] arm: dts: Remove duplicate newlines   Marek Vasut
  • [PATCH 05/45] arm: include: fsl: Remove duplicate newlines   Marek Vasut
  • [PATCH 06/45] arm: include: hisilicon: Remove duplicate newlines   Marek Vasut
  • [PATCH 07/45] arm: include: nxp: Remove duplicate newlines   Marek Vasut
  • [PATCH 08/45] arm: include: amlogic: Remove duplicate newlines   Marek Vasut
  • [PATCH 09/45] arm: include: imx: Remove duplicate newlines   Marek Vasut
  • [PATCH 10/45] arm: include: ti: Remove duplicate newlines   Marek Vasut
  • [PATCH 11/45] arm: include: rockchip: Remove duplicate newlines   Marek Vasut
  • [PATCH 12/45] arm: include: sunxi: Remove duplicate newlines   Marek Vasut
  • [PATCH 13/45] arm: include: tegra: Remove duplicate newlines   Marek Vasut
  • [PATCH 14/45] arm: include: Remove duplicate newlines   Marek Vasut
  • [PATCH 15/45] arm: mach: at91: Remove duplicate newlines   Marek Vasut
  • [PATCH 16/45] arm: mach: ti: Remove duplicate newlines   Marek Vasut
  • [PATCH 17/45] arm: mach: exynos: Remove duplicate newlines   Marek Vasut
  • [PATCH 18/45] arm: mach: imx: Remove duplicate newlines   Marek Vasut
  • [PATCH 19/45] arm: mach: marvell: Remove duplicate newlines   Marek Vasut
  • [PATCH 20/45] arm: mach: renesas: Remove duplicate newlines   Marek Vasut
  • [PATCH 21/45] arm: mach: socfpga: Remove duplicate newlines   Marek Vasut
  • [PATCH 22/45] arm: mach: stm32: Remove duplicate newlines   Marek Vasut
  • [PATCH 23/45] arm: mach: sunxi: Remove duplicate newlines   Marek Vasut
  • [PATCH 24/45] boot: Remove duplicate newlines   Marek Vasut
  • [PATCH 25/45] cmd: Remove duplicate newlines   Marek Vasut
  • [PATCH 26/45] common: Remove duplicate newlines   Marek Vasut
  • [PATCH 27/45] disk: Remove duplicate newlines   Marek Vasut
  • [PATCH 28/45] env: Remove duplicate newlines   Marek Vasut
  • [PATCH 29/45] examples: Remove duplicate newlines   Marek Vasut
  • [PATCH 30/45] fs: Remove duplicate newlines   Marek Vasut
  • [PATCH 31/45] lib: Remove duplicate newlines   Marek Vasut
  • [PATCH 32/45] m68k: Remove duplicate newlines   Marek Vasut
  • [PATCH 33/45] microblaze: Remove duplicate newlines   Marek Vasut
  • [PATCH 34/45] mips: Remove duplicate newlines   Marek Vasut
  • [PATCH 35/45] net: Remove duplicate newlines   Marek Vasut
  • [PATCH 36/45] nios2: Remove duplicate newlines   Marek Vasut
  • [PATCH 37/45] post: Remove duplicate newlines   Marek Vasut
  • [PATCH 38/45] ppc: Remove duplicate newlines   Marek Vasut
  • [PATCH 39/45] sandbox: Remove duplicate newlines   Marek Vasut
  • [PATCH 40/45] scripts: Remove duplicate newlines   Marek Vasut
  • [PATCH 41/45] sh: Remove duplicate newlines   Marek Vasut
  • [PATCH 42/45] test: Remove duplicate newlines   Marek Vasut
  • [PATCH 43/45] tools: Remove duplicate newlines   Marek Vasut
  • [PATCH 44/45] x86: Remove duplicate newlines   Marek Vasut
  • [PATCH 45/45] xtensa: Remove duplicate newlines   Marek Vasut
• [PATCH] turris_1x: Normalize Kconfig usage   Tom Rini
• [PATCH 0/6] Add Turris 1.x board   Tom Rini

Last message date: Sat Jul 13 17:16:03 CEST 2024
Archived on: Sat Jul 13 17:16:27 CEST 2024

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...