[PATCH 16/17] arm: mach-bcm283x: Enable ARMV8_MULTIENTRY

[Patrick Rudolph]

On FDT platforms the APs are brought out of reset using the spin-table
as defined in the DT. On ACPI enabled platforms there's no FDT, thus
enable the ARMV8_MULTIENTRY to use the ACPI parking protocol instead.

TEST: - Aps enter U-Boot when run on qemu-system-aarch64 -machine raspi4b
      -	APs on real hardware do not enter U-Boot! To be investigated.

Signed-off-by: Patrick Rudolph <patrick.rudolph at 9elements.com>
Cc: Matthias Brugger <mbrugger at suse.com>
Cc: Peter Robinson <pbrobinson at gmail.com>
Cc: Tom Rini <trini at konsulko.com>
---
 arch/arm/mach-bcm283x/Kconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-bcm283x/Kconfig b/arch/arm/mach-bcm283x/Kconfig
index de783aa8f5..d2abeb778f 100644
--- a/arch/arm/mach-bcm283x/Kconfig
+++ b/arch/arm/mach-bcm283x/Kconfig
@@ -26,6 +26,7 @@ config BCM2837_64B
 	depends on ARCH_BCM283X
 	select BCM2837
 	select ARM64
+	select ARMV8_MULTIENTRY if GENERATE_ACPI_TABLE
 
 config BCM2711
 	bool "Broadcom BCM2711 SoC support"
@@ -45,6 +46,7 @@ config BCM2711_64B
 	depends on ARCH_BCM283X
 	select BCM2711
 	select ARM64
+	select ARMV8_MULTIENTRY if GENERATE_ACPI_TABLE
 
 menu "Broadcom BCM283X family"
 	depends on ARCH_BCM283X
-- 
2.45.2